Hello. This is my first thread on xda. I downloaded the CM 13 unofficial ROM by mygalaxya (filename - "cm13.020160319unofficiala3ltexx.zip") for my Galaxy A300H running on Lolipop v5.0.2 (build number LRX22G.A300HXXU1BOK6). I successfully downloaded the ROM and placed it in my SDcard. I then booted into recovery mode in order to install it (TWRP 2.8.7.0). Then I wiped EVERYTHING (in wipe/advanced wipe) except sdcard. Then I tried to install the rom. Then it throws up an error (error executing updater binary in *filename.zip*). So I decided to replace the 'updater-binary' and 'updater-script file' in the zip file itself. I have another rom which works 'perfectly'. But it had a LOT of broken apps and it wouldn't let my phone charge. But it would install and boot up perfectly on my phone. So I extracted these two files from that old rom (which is the cm12.1 rom which weighs 294mb. It's also created by same developer 'mygalaxya'). I replaced the 2 files in new rom (cm13) and saved the zip file. I then moved it to the sdcard. Then I booted into recovery and tried to flash the cm13 again. It seemed to install without any problem. I turned on the phone normally. Then the glowing CM logo animation plays. I know that the first boot takes some time (on my old cm12.1 rom it was max. 5 minutes). I waited more than 20 mins, but nothing happened. The boot animation was continuously playing but it wasn't booting up. I tried wiping cache and dalvik cache in the recovery mode. I even tried to factory reset but that also DIDN'T help. Now what should I do? Reply ASAP. Any reply is really appreciated
cm 13 for a3 a300h
Hey bro. you need to be on twrp 3 for installing cm 13.1st istalll latest twrp 3 .which is available on XDA for Galaxy a3 a300h .then install cm 13
zuhaibsarwar said:
Hey bro. you need to be on twrp 3 for installing cm 13.1st istalll latest twrp 3 .which is available on XDA for Galaxy a3 a300h .then install cm 13
Click to expand...
Click to collapse
Thanks m8. Using TWRP 3.0.0-0 worked!
zuhaibsarwar said:
Hey bro. you need to be on twrp 3 for installing cm 13.1st istalll latest twrp 3 .which is available on XDA for Galaxy a3 a300h .then install cm 13
Click to expand...
Click to collapse
Thanks m8. Using TWRP v3 worked!
Related
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
I am having EXACTLY the same problem here!!! It happened after I flashed stock BTU (UK unbranded) and then trying to revert back to BlissPop/CM13. Maybe the new stock boot/modem is not supported by custom ROM makers yet?
Could anyone confirm/solve this? Thanks a lot!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
spolarbear said:
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Click to expand...
Click to collapse
statiicz said:
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
Click to expand...
Click to collapse
Sorry its taken me so long to reply back, had stuff going on. Anyways, after doing some studying and playing with my sisters G5. They seem to be very finicky with modifications, even after root and a custom recovery installed. One thing to try (because it happened on my skyrocket), is to reinstall your recoveries and do it with a computer, that how to get a stable install, if your already using a computer, then it sounds like a something from the old firmware may still be their. You may need to install the earliest stock firmware for your G5 out of the box, and root it from their, you may even need a complete stock restore then re-root and install your custom recovery. Also. I have had some roms take 20 minutes to boot, but thats the rom stabilising.
Sent from my LG-H900 using XDA-Developers mobile app
I have HM2014818 model (variant of HM2014811) and had the latest MIUI ROM 7.2 (developer). I decided to flash CM 13 first which resulted in bootloop then I flashed Resurrection remix which also ended in error. Now the procedure which i followed is.
1. Enter recovery mode TWRP 3.0.2-0-wt88047
2. Wipe data, system, cache , dalvik cache (formatted user data as well for last resort)
3.Flashed The ROM
4. FLashed GAPPS (Tried without flashing as well)
5. Wipe cache/dalvik cache (tried without it also)
6. Reboot System results in boot loop or boot stuck (with MI logo)
Here what I have done so far to correct it.
Downloaded stock ROM for Redmi 2 (latest developer version 6.4.14) unzipped it extracted boot.img file, replaced the resurrection remix boot.img file with stock boot.img file. The system booted, the only problem is the resurrection remix logo takes 15 minutes to change its animation sequence, it is not at all smooth. It is laggy. How to fix this can anyone give the appropriate boot.img image for faster boot keeping in mind my phone only boots from stock Boot.img file.
Restore to kitkat partitions (instructions from here).
Then wipe all data, reboot to recovery, and then flash again.
zeomal said:
Restore to kitkat partitions (instructions from here).
Then wipe all data, reboot to recovery, and then flash again.
Click to expand...
Click to collapse
What is the error ? And how is this method gonna correct it ?
nrdnandan said:
What is the error ? And how is this method gonna correct it ?
Click to expand...
Click to collapse
I have no idea of what the error per se is, but I remember having faced a similar problem and this is how I corrected it. I'm no developer.
nrdnandan said:
What is the error ? And how is this method gonna correct it ?
Click to expand...
Click to collapse
U can't flash cm13 or other mm ROMs if u r on miui lollipop bootloader.. Just downgrade to KitKat.
U can use this guide http://forum.xda-developers.com/redmi-2/how-to/rom-stock-kitkat-miui-6-fastboot-rom-t3375693
Sent from my 2014818 using XDA-Developers mobile app
Hey guys
I m getting problems after successfully Flashing custom rom
I M using YU yureka On 4.4.4 kitat My phone is Rooted and Using Twrp recovery
I wanted to flash a customROM and upgrade yureka to CM 13
So First I downloaded CM 13 unofficial by santosh
Then wipe data dalvik cache and it was flashed successfully and then flashed gapps
Both got successful and when I reboot my device. Got stuck on YU logo I waited for 20-25,min but no result
Then I boot in recovery and restored my old stock ROM which was backed up
Then I downloaded crdroid ROM
But i got status 7 error so I deleted both rom
And Now I downloaded tamsek ROM it got successfully flashed and same problem stuck at boot logo I have restored to stock and using
But how do I flash Custom ROM
Why I m Getting error
help me some1
Reply fast with solution
What's the version of TWRP?
First try to update to COS12 stock ROM and check if its booting normally. Afterwards try to flash custom ROMs from latest TWRP recovery.
Yes I thought that only to flash it on COS 12 but if another solution is available to direct update it to CM 13
And I m using Latest version of Twrp recovery
Dark_Knight16 said:
Yes I thought that only to flash it on COS 12 but if another solution is available to direct update it to CM 13
And I m using Latest version of Twrp recovery
Click to expand...
Click to collapse
You have tried everything but nothing worked. So I think flashing official COS12 first is only option left now.
Hello all.
I have a Galaxy S5 running cyanogen 13 ( cm-13.0-20161013-SNAPSHOT-ZNH5YAO21L-klte.zip ). Last night I updated it with the cyanogen tool, as usual, thinking that I was just getting a more updated version of cyanogen 13, but apparently I got it working with android 7.1.
As gapps were not working, I downloaded both 7.1 gapps, and cm-13 to try to install gapps or comeback to cm-13 if it did not work.
The problem is that I had no chance to test it. I rebooted the phone with the option "recovery reboot" and after it turned off it showed something like "no command", then it got to the first screen (recovey booting... in blue, samsung galaxy s5 white logo...) and freezed there.
I've tried every key combination and it does change nothing. I've read in another forum an user having the same issue so I advice you to not install this update. At least not from CM13. I will update when I get more details from the other users or if one of us success while trying to unbrick.
I suggest you to install twrp with Odin so you are sure that you have working recovery. Then backup what left of this not working ROM and download cm 13 and gapps for it. Then wipe system partition and install those two. By some chance you will end up with working ROM. If it works, I suggest you to backup all data with titanium backup and clean flash cm 13 to be sure that you got rid of all the issues... If cm 13 doesn't boot also wipe data and start on new.
I hope it helps you
LGaljo said:
I suggest you to install twrp with Odin so you are sure that you have working recovery. Then backup what left of this not working ROM and download cm 13 and gapps for it. Then wipe system partition and install those two. By some chance you will end up with working ROM. If it works, I suggest you to backup all data with titanium backup and clean flash cm 13 to be sure that you got rid of all the issues... If cm 13 doesn't boot also wipe data and start on new.
I hope it helps you
Click to expand...
Click to collapse
Hello!
Thank you very much, as I found the problem was the recovery I've re installed TRWP. CM14 was replacing it each time I installed it by ODIN so i had to start it just directly after flashing it (without letting the phone boot) and i've installed last CM14 klte file and 7.1 GAPPs
Now all is working , I hope it can help others with the same problem
Thank you!
I am running resurrection remix mm 5.7.4 with twrp 3.0.2 by kumajaya on my redmi 2 prime with lollipop bootloader( 2014818 Indian 2 gb ram variant )
I lost my miui twrp backups and now my pc is not working too.
I want to install miui on my phone back preferably lollipop miui 7.
Is there any way to do so without a pc recovery itself?
Download the recovery zip file of MIUI by googling it. (Version you required)
If you want latest version.
Then Google 'MIUI downloads' and search your device and download the ROM.
Then head over to TWRP and flash the zip.
It will give error for the first time.
Flash it again.
It will get flashed.
Then hit reboot, and reboot your device.
Voila! Now you have MIUI on your device.
I have successfully installed miui lollipop base on my redmi 2 prime without any errors.
Also I have confirmed from external app and settings the information of the device that it shows the correct device info.( provided my custom showed correct device info ).
I tried installing the miui ROM as sethidheeraj said. I started wiping system artcache cache and data but was not able to install miui after repeated tries
Then I restored my custom ROM backup
Then by following these steps I got miui back :
1 install your custom ROM( I had rr 5.7.4 mm) or restore your custom ROM backup
2 boot to recovery and flash the miui ROM without wiping system partition
3 it will take real good amount of time and the logs displayed on twrp also aren't very long, don't worry it is still being installed
4 just for your surity wipe data and caches and again flash the miui ROM
5 reboot to system and take a drink for a while coz it is the first boot
Tadaaaa
You have your stock miui back
Also no damages to your recovery or anything.
Download twrp 3.0.2.0 of kumajaya twrp because its device model no will be in wt88047etc...not hm2014818...use flashify app tp flash recovery. Img on using ur rooted custom rr remix...boot to recovery... Wipe cache, dalvil, system,data....then make sure Miui lp rom is in internal memory.... Then install it...it will give some error on start....then install again...it will take around 20min for install plus full boot up.
Riyanx55tu said:
Download twrp 3.0.2.0 of kumajaya twrp because its device model no will be in wt88047etc...not hm2014818...use flashify app tp flash recovery. Img on using ur rooted custom rr remix...boot to recovery... Wipe cache, dalvil, system,data....then make sure Miui lp rom is in internal memory.... .
Click to expand...
Click to collapse
I already installed MIUI and I have posted it's method above your post in my post.
Jamie446677 said:
I already installed MIUI and I have posted it's method above your post in my post.
Click to expand...
Click to collapse
Great ?
Jamie446677 said:
I have successfully installed miui lollipop base on my redmi 2 prime without any errors.
Also I have confirmed from external app and settings the information of the device that it shows the correct device info.( provided my custom showed correct device info ).
I tried installing the miui ROM as sethidheeraj said. I started wiping system artcache cache and data but was not able to install miui after repeated tries
Then I restored my custom ROM backup
Then by following these steps I got miui back :
1 install your custom ROM( I had rr 5.7.4 mm) or restore your custom ROM backup
2 boot to recovery and flash the miui ROM without wiping system partition
3 it will take real good amount of time and the logs displayed on twrp also aren't very long, don't worry it is still being installed
4 just for your surity wipe data and caches and again flash the miui ROM
5 reboot to system and take a drink for a while coz it is the first boot
Tadaaaa
You have your stock miui back
Also no damages to your recovery or anything.
Click to expand...
Click to collapse
Can you give me a video of that i didn't understand that without wiping system partition it was giving the error 7
Sent from my Xiaomi Redmi 2 using XDA Labs
Bhavesh Tak said:
Can you give me a video of that i didn't understand that without wiping system partition it was giving the error 7
Click to expand...
Click to collapse
I don't have a video tho but I meant that you should only wipe data and caches but leave system as it is. ( My phone had rr marshmallow installed before.) After rr I haven't tried any custom roms so I don't know whether it will work on others. So just flash miui 7.5 like you would for an OTA but do wipe your data and caches