nexus is not asking for the pattern after restart - Nexus 6P Q&A, Help & Troubleshooting

hi everyone
after i have got march security update my nexus should ask for the pattern after restarting and it should be before system is fully loaded right? "at least this is what was happening before march update"
but after the update when i restart the device it loads the system fully until lock screen and then it asks for the pattern or finger print , so what is the problem
i want to mention that its all stock and i haven't change anything in the settings after the update
thanks

akkad111 said:
hi everyone
after i have got march security update my nexus should ask for the pattern after restarting and it should be before system is fully loaded right? "at least this is what was happening before march update"
but after the update when i restart the device it loads the system fully until lock screen and then it asks for the pattern or finger print , so what is the problem
i want to mention that its all stock and i haven't change anything in the settings after the update
thanks
Click to expand...
Click to collapse
Have you made a fresh install or updated OTA?
Also, if you have updated OTA, have you previously been using a PIN/Password/Pattern?
Are you talking about the boot-up lock, or the encryption lock?

yes exactly boot-up lock and it was OTA update and yes i have been using pattern and i remember after i set it asked me if i want to approve my pattern while booting up

akkad111 said:
yes exactly boot-up lock and it was OTA update and yes i have been using pattern and i remember after i set it asked me if i want to approve my pattern while booting up
Click to expand...
Click to collapse
Maybe, reset the pattern lock once again?

DJBhardwaj said:
Maybe, reset the pattern lock once again?
Click to expand...
Click to collapse
solved ? you are right it was changed after the update i dont know why, thanks

akkad111 said:
solved �� you are right it was changed after the update i dont know why, thanks
Click to expand...
Click to collapse
Nice, that it worked. You're very much welcome.

I've discovered the same behavior after flashing elementalX
Gesendet von meinem Nexus 6P mit Tapatalk

chikess said:
I've discovered the same behavior after flashing elementalX
Gesendet von meinem Nexus 6P mit Tapatalk
Click to expand...
Click to collapse
Did resetting the pattern/lock method work for you?

Yes, it did
Gesendet von meinem Nexus 6P mit Tapatalk

chikess said:
Yes, it did
Gesendet von meinem Nexus 6P mit Tapatalk
Click to expand...
Click to collapse
Good to know. :highfive:

Related

Random reboot

Hi! I'm on YOG4PAS2WN and i'm experiencing some RR.. Anyone else had this issue? Hope Cyano Team will fix this!
Inviato dal mio Z1 utilizzando Tapatalk
I think this is not a problem of Cyanogen OS. How you update your devixe?
Gesendet von meinem Redmi Note 2 mit Tapatalk
same problem here, International Zuk Z1 with Stock CM on it, updated it to the latest build, anyone has an idea of the cause? Random Reboots are a no go for me, i use this phone daily for work.....
Klanac89 said:
I think this is not a problem of Cyanogen OS. How you update your devixe?
Gesendet von meinem Redmi Note 2 mit Tapatalk
Click to expand...
Click to collapse
Installed with QSPT tool and updated via OTA to the last release!
Inviato dal mio Z1 utilizzando Tapatalk
Get my Z1 today, 4 updates over OTA and no reboots.
Gesendet von meinem Z1 mit Tapatalk
Me too me restarts. Zuk z1 international CM12.1 reboot random. OTA updated 2 times.
No root, no TWRP, no xposed, no soft... Only ES Explorer, Whastapp, and Twitter.
Two random reboots in 72 hours.
Sorry my english.
Ok I get my first reboot to
Really lame from Cyanogen. It's like GSMarena sad "feels like we get an unofficial cyanogenmod rom"... Also no section at cyanogenmod forum.
Gesendet von meinem Z1 mit Tapatalk
Klanac89 said:
Ok I get my first reboot to
Really lame from Cyanogen. It's like GSMarena sad "feels like we get an unofficial cyanogenmod rom"... Also no section at cyanogenmod forum.
Gesendet von meinem Z1 mit Tapatalk
Click to expand...
Click to collapse
Are u on YOG4PAS2WN version too?
Yes
Klanac89 said:
Yes
Click to expand...
Click to collapse
Now I'm on the YOG4PAS2HB version and it runs without problems.
I'm scared to update Cyanonogen due to random reboots reported in this thread, tell me when it will be updated with a new version that I hope resolve this issue.
tnx :good:
I get 2 updates today... No more problems
Brutalibus said:
Now I'm on the YOG4PAS2HB version and it runs without problems.
I'm scared to update Cyanonogen due to random reboots reported in this thread, tell me when it will be updated with a new version that I hope resolve this issue.
tnx :good:
Click to expand...
Click to collapse
I can confirm, till now no more reboots after recent two updates. I,m on YOG4PAS38J now. Running smoothly from two days now.
Me too. Two updates via OTA and no more random reboot.
For me YOG4PAS3AJ, got two random reboots... one yesterday, one today...
picardbluenight said:
For me YOG4PAS3AJ, got two random reboots... one yesterday, one today...
Click to expand...
Click to collapse
I haven't any kind of random reboots, maybe the problem is some incompatible applications?
Enviado desde mi Z1 mediante Tapatalk
deejaycarras said:
I haven't any kind of random reboots, maybe the problem is some incompatible applications?
Enviado desde mi Z1 mediante Tapatalk
Click to expand...
Click to collapse
I think the apps I have are very common... Every app d/l from google playstore... just a game, news, some radio apps...
Today didn't get more reboots, but still is soon to determine/be inclined for some cause...
I am on 12.1-YOGA4PAS3AJ international version. I have random reboots since I have the device. Since the latest OTA I have up to 3 reboots per day.
colognerunner said:
I am on 12.1-YOGA4PAS3AJ international version. I have random reboots since I have the device. Since the latest OTA I have up to 3 reboots per day.
Click to expand...
Click to collapse
I encounter a reboot in the following scenario:
- change from airplane mode to normal operation and open SIM1 settings before the phone connects to mobile network
- search for mobile networks on SIM1 in my home area (carrier is E-Plus Germany, only 2G available). Searching for mobile networks when the phone is connected to 3G network doesn't cause a reboot.
I experienced a random rebbot yesterday with latest CM update. Today works fine
Random reboots here since I got my stock device about four weeks ago. Updated regularly, no noticeable improvement. Currently running 12.1-YOG4PAS3AJ and it keeps rebooting about 2 times in 3 days. If it reboots, it reboots twice ore more a day, sometimes it runs smoothly the following two do four days.

Liste of bug in b511

No local update
You must enter the code when you start the phone
No more option in wifi
No way to change the front in the theme
There is only 9 option in diplay bar
No way to rollback
........
Have you any others?
Gameloft games crash!
Now I cant download any new theams, because I cant login to Huawei ID from my location.
I wonder why there si no rollback and no local update!!!!!
Is this a new politics from huawei
Prof1977 said:
I wonder why there si no rollback and no local update!!!!!
Is this a new politics from huawei
Click to expand...
Click to collapse
remember this is a beta, not a final version.
I tkink its a final one when i connect to the hisuite its show stable
users who posted the OTA had to sign up for a beta.
Not all of them some users has the ota whithout signing in beta test
I m asking why they dont send a rollback from marshmallow like they do whith lolipop
CloudCompute said:
Now I cant download any new theams, because I cant login to Huawei ID from my location.
Click to expand...
Click to collapse
Is the issue with downloading new theams limited to B511 or is it now a universal problem? Are the theams available elsewhere to be downloaded?
CloudCompute said:
Now I cant download any new theams, because I cant login to Huawei ID from my location.
Click to expand...
Click to collapse
I could never login to Huawei ID, not even on KK or LP, it says its not enabled in my location. However I was still able to download any theme I like so I don't think that's the issue.
Sent using Tapatalk
no fb notifications for me
CloudCompute said:
Now I cant download any new theams, because I cant login to Huawei ID from my location.
Click to expand...
Click to collapse
I had same problem, but it started working well after few days. Don't have location error anymore... so be patient
Boombarder said:
I had same problem, but it started working well after few days. Don't have location error anymore... so be patient
Click to expand...
Click to collapse
But its still not perfectly working lik the lolipop b326.i think they have to give us rollback to lolipop
Prof1977 said:
But its still not perfectly working lik the lolipop b326.i think they have to give us rollback to lolipop
Click to expand...
Click to collapse
Actually I had this problem on Lollipop (KangVip rom) , not on Marshmallow, so I think that chinese roms/updates making the problem. On M everything working fine for me, now.
Does someone know how to fix Wifi and Bluetooth on MT7-L09 running B511?
you have to uninstall the Huawei id download to topics then you can download
Gesendet von meinem JAZZ mit Tapatalk
What WiFi and bt problems are you have? It working perfect for me. Only problem i have is big ram usage.
I have done so and has , I can work now in store Theme Download everything
Gesendet von meinem JAZZ mit Tapatalk
---------- Post added at 04:14 PM ---------- Previous post was at 04:12 PM ----------
Wifi working
Gesendet von meinem JAZZ mit Tapatalk
---------- Post added at 04:15 PM ---------- Previous post was at 04:14 PM ----------
What I miss is the backup option
Gesendet von meinem JAZZ mit Tapatalk
Guys I am having a major issue with my mate 7. Running B511, im not sure if its hardware or software related. Pressing the power button results in the phone rebooting. If the screen is locked and i tap the power button to unlock it nothing happens. I can still unlock the phone using my fingerprint, and lock the phone using the floating dock/suspend button popup menu. If the phone is unlocked and i press the button to turn of the screen and lock the phone, nothing happens at first then the long press menu shows up (the menu with power off, restart, airplane mode etc) and following that regardless of what i do the phone reboots. Some times it reboots the first try and other times its like it gets into a boot loop? Its almost as if the phone is registering that the button is being pressed but doesnt register when its released, if thats possible. If i use the phone without touching the button at all everything works fine and no rebooting occurs. I have done a factory reset and the problem persists after the reset.
Please can somebody give me any ideas?

[How To] Get Android 7.0 Update NOW

enroll in the android beta here:
https://www.google.com/android/beta?u=0
Check for update on your phone. It will be stock 7.0
You're welcome
i, sadly, get the "no supported devices" message.
anxiously waiting for the factory image to be posted.
noidea24 said:
i, sadly, get the "no supported devices" message.
anxiously waiting for the factory image to be posted.
Click to expand...
Click to collapse
Just create a second Google account and it should work.
Sent from my Nexus 5X using Tapatalk
crian said:
Just create a second Google account and it should work.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
i didnt create a new account, but i did just try signing in from my other 2 account on my phone, then checking on the site. still same message
Wow, its' working !
ASTERISK
This method only works if you're stock. If you're rooted, this method will NOT work.
You're welcome.
Alcolawl said:
This method only works if you're stock. If you're rooted, this method will NOT work.
You're welcome.
Click to expand...
Click to collapse
Can confirm, all downloaded and installing now. Took some quick keyboard work at work to use fastboot and flash back entirely to stock (recovery included) while signing up for the beta. Popped up instantly.
is this the new one ? or this is still the old beta ?
Installing also, looks that this is final build with changelog
Can someone tell us if this is the final version?
Sent from my LG-V500 using Tapatalk
Now, please tell us what happen if you un enroll your device? Just a reset factory? or nothing happen? can anyone test it?
Alcolawl said:
This method only works if you're stock. If you're rooted, this method will NOT work.
You're welcome.
Click to expand...
Click to collapse
I was rooted with Magisk. I disabled root from the Magisk Manager and installed the OTA update. I lost root but gained Nougat.
Alcolawl said:
This method only works if you're stock. If you're rooted, this method will NOT work.
You're welcome.
Click to expand...
Click to collapse
If you are rooted with Systemless SuperSu you can still download the OTA as usual then install it with the Flashfire app rather than installing from the prompt. Worked for me anyway.
how do i upgrade from purenexus while keeping TWRP and leaving my file system decrypted? I don't mind wiping my data.
behzad.bz said:
Now, please tell us what happen if you un enroll your device? Just a reset factory? or nothing happen? can anyone test it?
Click to expand...
Click to collapse
Anyone have answer for this? I don't want to wipe my device.
Thank you guys in advance.
nikola1970 said:
Anyone have answer for this? I don't want to wipe my device.
Thank you guys in advance.
Click to expand...
Click to collapse
I want to wipe my device but im worried about that it back my phone to MM! Idk maybe there will be some bugs in googles servers. Maybe im going crazy[emoji21]
Sent from my Nexus 5X using Tapatalk
behzad.bz said:
I want to wipe my device but im worried about that it back my phone to MM! Idk maybe there will be some bugs in googles servers. Maybe im going crazy[emoji21]
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Don't worry, nothing bad will happen to your device, but you won't get more beta releases until you opt-in again!
nikola1970 said:
Anyone have answer for this? I don't want to wipe my device.
Thank you guys in advance.
Click to expand...
Click to collapse
All files are alive after this upgrade. In my case
So, just tried to upgrade.
After half an hour of downloading and updating, it reached the point where the phone restarted itself, but all I saw is an open-android icon with a message "Error!" :/
Simply restarted the phone and back to 6.0.1. Unfortunately.
Full ota link here
https://android.googleapis.com/pack.../cd8d8f775bcdb6a76a496a3a664caba0b9ed47f9.zip
Use with pc android recovery and run adb sideload
Inviato dal mio Nexus 5X utilizzando Tapatalk

Shield Tablet Firmware Update 5.1 Android N

I'm using RoW LTE on my US-LTE device and I just received the 5.1 update 5 minutes ago. I'm excited to see some improvements. It seems launcher 3 crashes were one of the most dominant problem of 5.0. good thing I'm always using Google now.
If someone has finished installing theirs, how's the experience so far?
Son-j said:
I'm using RoW LTE on my US-LTE device and I just received the 5.1 update 5 minutes ago. I'm excited to see some improvements. It seems launcher 3 crashes were one of the most dominant problem of 5.0. good thing I'm always using Google now.
If someone has finished installing theirs, how's the experience so far?
Click to expand...
Click to collapse
I have installed it. Nothing new... Only kernel date change... And improvements i suppose...
But everything is fine for now haha
Enviado desde mi S3 mediante Tapatalk
kaneki666 said:
I have installed it. Nothing new... Only kernel date change... And improvements i suppose...
But everything is fine for now haha
Enviado desde mi S3 mediante Tapatalk
Click to expand...
Click to collapse
Haha I know what you mean. Although kudos still to Nvidia developers team for patiently updating our device.
Yours is wifi or RoW?
Son-j said:
Haha I know what you mean. Although kudos still to Nvidia developers team for patiently updating our device.
Yours is wifi or RoW?
Click to expand...
Click to collapse
I have the k1 WiFi [emoji14]
Enviado desde mi S3 mediante Tapatalk
I just got the update and install it on my rooted and unlocked Nvidia Shield ORIGINAL Tablet. The update downloaded and successfully installed through TWRP, that said I’m pretty sure I lost root but that's easy enough to get back.
Update: You have to reinstall custom recovery. Also my device has seemed a bit laggy, it took about 15 seconds for my virtual keyboard to pop up to make this post.
Captain_FSU said:
I just got the update and install it on my rooted and unlocked Nvidia Shield ORIGINAL Tablet. The update downloaded and successfully installed through TWRP, that said I’m pretty sure I lost root but that's easy enough to get back.
Update: You have to reinstall custom recovery. Also my device has seemed a bit laggy, it took about 15 seconds for my virtual keyboard to pop up to make this post.
Click to expand...
Click to collapse
Yes, at firt have a bit lag
Enviado desde mi S3 mediante Tapatalk
A link for the full OTA would be appreciated guys. Thanks.
Enviado desde mi SHIELD Tablet mediante Tapatalk
Sjamaan said:
A link for the full OTA would be appreciated guys. Thanks.
Enviado desde mi SHIELD Tablet mediante Tapatalk
Click to expand...
Click to collapse
I tried that using the URL pattern from Android M but I couldn't get the right changes. Maybe others will have better luck.
Btw, for those who have installed it, the new update messed up my TWRP. Just re-flash it.
After flashing TWRP and wiping cache and dalvik, it became quite laggy. Weird. I'll let it "settle" for a while.
I guess no matter how much this device gets updated, it can never escape the occasional lags. I suspect that these are caused by Nvidia apps. I wonder why nobody has called out this phenomenon yet.
Or maybe, it's about time that Nvidia release some technical docs for the geniuses of XDA to be able to make their own mods or improvements.
I received it some hours ago on Original LTE model.
Tablet is very smooth, 98 500 on antutu in performance mode.
Sjamaan said:
A link for the full OTA would be appreciated guys. Thanks.
Enviado desde mi SHIELD Tablet mediante Tapatalk
Click to expand...
Click to collapse
Try this http://www.mediafire.com/file/uq9aycuhmvdd88k/PUBLICa1210b0320da820acb99f21e5aaed4bd.zip
mikemelbrooks said:
Try this http://www.mediafire.com/file/uq9aycuhmvdd88k/PUBLICa1210b0320da820acb99f21e5aaed4bd.zip
Click to expand...
Click to collapse
Thank you kind sir! What version is this? WiFi or 3G?
Enviado desde mi SHIELD Tablet mediante Tapatalk
Original Shield North America Wi-Fi Full OTA directly from nVidia servers:
http://ota-downloads.nvidia.com/ota...-full_ota-1928188_850.6612.20170219210839.zip
MD5 Hash: a1210b0320da820acb99f21e5aaed4bd
This looks like a minor update/fix - still v.7.0 with Dec. security updates.
Looking forward to 7.1.1 and latest security updates..
Sent from my SHIELD Tablet using XDA-Developers Legacy app
mikemelbrooks said:
Try this http://www.mediafire.com/file/uq9aycuhmvdd88k/PUBLICa1210b0320da820acb99f21e5aaed4bd.zip
Click to expand...
Click to collapse
It is the update 5.1 for LTE Row?
Inviato dal mio D6503 utilizzando Tapatalk
It is captured from a wifi only model.
mikemelbrooks said:
It is captured from a wifi only model.
Click to expand...
Click to collapse
K1 or original ?nthanks
I just flashed this update with flashfire and all is perfect just download the full update open the flashfire app and click flash and job done. I kept TWRP and root, it's by far the easiest way to flash the update.
Sent from my SHIELD Tablet K1 using Tapatalk
@robgee789
Working good, no lags?
dzidexx said:
@robgee789
Working good, no lags?
Click to expand...
Click to collapse
working perfect mate there was a little lag for 5 mins when it first booted but all is fine after that
Here is the link for the LTE RoW version :
https://mega.nz/#!lJFBkKgJ!GlkI0kAucW62tzqaKKU2oiAw-V2Z-_dVlUBqco6a8VY

Problem with 500firepaper app and A2017G 7.1.1 B02

Hey guys anyone else having issues with latest upgrade from ZTE and the specific app.
On my device it's not working at all.
Never had issues with previous ZTE software version and neither with many other phones latest years.
When trying to set image by opening wallpaper configurations simple doesn't open or response at all.
I'm pressing it and nothing happens.
I've try clear/data-cache of app not helped at all.
I've try previous version 2.70 nothing.
I've try restart my device and even clear cache partition from recovery menu and nothing.
Sent from my iPad using Tapatalk
Just tried it. No problems.
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
Just tried it. No problems.
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
I don't know what's else to do only hard reset on my device but I've already done this when upgrade from B01 to B02 couple of hours ego.
Do you have the latest B02 version?
Sent from my iPad using Tapatalk
I don't know either. Maybe just a dirty flash? That's what I would try.
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
I don't know either. Maybe just a dirty flash? That's what I would try.
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Just performed hard reset and setup as new and my first movements was installing the app and not working at all again.
Well only solution is downgrade to 6.0.1(B11) then.
It's unbelievable really unbelievable.
Sent from my iPad using Tapatalk
Yes. I'm on b02 as well. Is there any app that interferes? I dunno, it's the same situation.
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
Yes. I'm on b02 as well. Is there any app that interferes? I dunno, it's the same situation.
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
I really don't know.
As I said my first movement was just to install the app and nothing else.
Absolutely fresh situation.
Never had issues with all previous software version from ZTE as well neither with others phones so far.
I'm downgrading to 6.0.1 and upgrade to 7.1.1 without doing hard reset to see if with that way works or not.
Sent from my iPad using Tapatalk
paatha13 said:
I really don't know.
As I said my first movement was just to install the app and nothing else.
Absolutely fresh situation.
Never had issues with all previous software version from ZTE as well neither with others phones so far.
I'm downgrading to 6.0.1 and upgrade to 7.1.1 without doing hard reset to see if with that way works or not.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Good luck
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
Good luck [emoji110]
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Well strange things happened.
Downgrade to B10 and worked fine.
Upgrade OTA to B11 and still worked even after resetting my phone.
After that upgrade manually to 7.1.1(B01) and again worked even after resetting the phone.
And now the strange behavior begins.
Upgrade OTA to B02 and not perform hard reset and worked.
BUT when made clear cache partition and reboot the phone and now it's not working.
How can this be happening.
Can you please resetting(clear data) the app and relaunch it and tell me if its working or not.
Something going wrong with B02.
I don't have any other app installed on the device only 500 firepaper.
Sent from my iPad using Tapatalk
paatha13 said:
Well strange things happened.
Downgrade to B10 and worked fine.
Upgrade OTA to B11 and still worked even after resetting my phone.
After that upgrade manually to 7.1.1(B01) and again worked even after resetting the phone.
And now the strange behavior begins.
Upgrade OTA to B02 and not perform hard reset and worked.
BUT when made clear cache partition and reboot the phone and now it's not working.
How can this be happening.
Can you please resetting(clear data) the app and relaunch it and tell me if its working or not.
Something going wrong with B02.
I don't have any other app installed on the device only 500 firepaper.
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
What exactly does not work? To start the App... ?
Send from ZTE A2017G using Tapatalk
Not exactly.
The app is opening but when trying to open wallpaper configurations through settings of the app simple doesn't open-not response at all.
So in that case I can't set any wallpaper at all either home screen or lock screen.
Btw again downgrade this time to 7.1.1(B01) and made hard reset and setup as new the device.
The only app installed was 500 firepaper and worked fine.
Immediately upgrade OTA to B02 and after that the app stop working.
If go to open wallpaper configurations simple doesn't response.
Something wrong with B02 release by ZTE.
Never had issue with that app all that 2-3 years I'm using it.
Sent from my iPad using Tapatalk
marcus.linkenbach said:
What exactly does not work? To start the App... ?
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
I know now. In the beginning you cannot select. It just starts into settings and it is it not possible to set it as a wallpaper.
But I found out that it is not possible to set any live wallpaper. ?
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
I know now. In the beginning you cannot select. It just starts into settings and it is it not possible to set it as a wallpaper.
But I found out that it is not possible to set any live wallpaper. [emoji33]
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
Now believe me don't you??
Something wrong with some kind of badly conflict between B02 and this specific app.
Somehow ZTE screw up.
How can be possible with all other software version working fine and with B02 not.
Totally madness.
Sent from my iPad using Tapatalk
You should report this in the 'ZTE Axon 7 EU Community' Facebook group. They always report every issue directly to ZTE.
Send from ZTE A2017G using Tapatalk
marcus.linkenbach said:
You should report this in the 'ZTE Axon 7 EU Community' Facebook group. They always report every issue directly to ZTE.
Send from ZTE A2017G using Tapatalk
Click to expand...
Click to collapse
I'm thinking of reporting that issues at ZTE mobile de forum.
As ZTE Germany is the responsible of development and delivering new software version to A2017G device in Europe.
We can report it in English since they allow it.
http://www.ztemobile.de/forums/forum/zte-axon-serie-forum/zte-axon-7-forum/
Sent from my iPad using Tapatalk
[emoji106]
I'm having this same problem on my OnePlus 3.
I dome some digging and found out this problem has to do with the system app livewallpaperpicker, now that is installed, my phone See's the app(firepaper) as installed and when I touch open configuration it actually opens. Hope this helps, I love this wallpaper app also!
The only solution found for now is enabling confirmation from B01 and then upgrade to B02 is working.
I just must not perform any kind hard reset or app clear cache/clear data.
Then I couldn't make it work and I'm afraid of attempting any other solution because I don't want to broke something.
I hope the next update fix this things for G version.
It's really very very bizarre issue and somehow ZTE screw up with latest update.
Sent from my iPad using Tapatalk
Just upgrade to latest B04 and issue being finally addressed!!
https://forum.xda-developers.com/axon-7/how-to/a2017g-v1-2-b02-7-1-1-t3586563/page14
Sent from my iPad using Tapatalk

Categories

Resources