Related
So I got a replacement phone and order a new replacement for a a missing pixel on the lower side of the screen. But I hear a clicking sound like if its a spring clicking sound on G2 when opening it??? Anyone know what this is????
Sent from my T-Mobile G2 using XDA App
I do not know what it is but I have had the same faint clicking sound. I have had the phone since day 1.
what's the part#?
MARINERMOOSE241 said:
I do not know what it is but I have had the same faint clicking sound. I have had the phone since day 1.
Click to expand...
Click to collapse
Yea like a spring clicking sound not a regular click
Sent from my T-Mobile G2 using XDA App
Mine does it too. I just ignore it. Its just part of the phones overall hardware suckage imo.
My hinge clicks, but only because the screen moves up and down when the phone is closed. If I move the screen up and down while the phone is halfway open, I can see the clicking sound is coming from the ribbon cable. My replacement is on it's way.
Yeah its been discussed before. It's from the ribbon sticking.
What disappoints me about this phone is that it could have been perfect, build quality wise, except they ruined it by skimping out on hinge quality.
joebobjoe said:
What disappoints me about this phone is that it could have been perfect, build quality wise, except they ruined it by skimping out on hinge quality.
Click to expand...
Click to collapse
Yup, if only it was as good as the G1 except without that creaking sound we had. It really is a solid phone though. Just hate the fact, that dust gets over there, and it won't come out just by blowing over there.
Sent from my T-Mobile G2 using XDA App
joebobjoe said:
Yeah its been discussed before. It's from the ribbon sticking.
What disappoints me about this phone is that it could have been perfect, build quality wise, except they ruined it by skimping out on hinge quality.
Click to expand...
Click to collapse
Yea but the G2 I had before did not have this clicking sound it gets annoying tho.
Sent from my T-Mobile G2 using XDA App
Not sure it really is the ribbon. I'm pretty sure I've got this whole hinge thing figured out and why sometimes they start tight and then work themselves to nothingness.
Here is my theory...
The hinge bars are metal and they interface with another small metal strip in the screen. The ends of the hinge bars are not a circle but a eccentric cam shape. They interface with and tension by this other small metal strip essentially using it as a spring. Over time the metal strip bends in and the aluminum on the hinge bar cams wears down. Starting tight(er) and then finally ending loose. I think the sound you are hearing is the small metal strip binding and then springing back. You can verify the wear I'm talking about by inspecting the hinge arm by the screen when phone is all the way flipped out. You'll see it's anodizing is already wore off from the wear.
Hope someone understands what i'm talking about here.
simobile said:
Not sure it really is the ribbon. I'm pretty sure I've got this whole hinge thing figured out and why sometimes they start tight and then work themselves to nothingness.
Here is my theory...
The hinge bars are metal and they interface with another small metal strip in the screen. The ends of the hinge bars are not a circle but a eccentric cam shape. They interface with and tension by this other small metal strip essentially using it as a spring. Over time the metal strip bends in and the aluminum on the hinge bar cams wears down. Starting tight(er) and then finally ending loose. I think the sound you are hearing is the small metal strip binding and then springing back. You can verify the wear I'm talking about by inspecting the hinge arm by the screen when phone is all the way flipped out. You'll see it's anodizing is already wore off from the wear.
Hope someone understands what i'm talking about here.
Click to expand...
Click to collapse
I'm almost deff it is not the ribbon because my old G2 didn't do the click so it Can't be the ribbon if so than the old G2 would've do the click since it also had a ribbon. You say the hinges loosen up but my old G2 never got loose it was tight and I had for almost a month so that can't be either, since the day 1 never loosen up one bit. And this one is also tight but the difference is it has the click. Wow htc really screw up big time here like seriously all these phones all got different hardware built, and you ask yourselves why the heck is that. And the thing that really gets me angry is their stupid silence on this. I order another exchange on this phone again this will be my third one now and should be here by wednsday man I just hope I got a good once and for all. Or htc will have their phone back so they can fix their crappy hinge. I don't care what they're going to do but make my hinges tight spring load them do whatever you want but I want it to close or open when I want not when gravity feels like it lol
Sent from my T-Mobile G2 using XDA App
Sorry to resurrect an old thread, but my one-week-old G2 is starting to exhibit the same sound when opening the keyboard. This doesn't happen when I close it, just when it opens. It's a very faint clicking sound, nothing too alarming (for the moment anyway), but it just started today. After searching these forums for a similar complaint, I've come across this one and have a few questions to ask.
1) Does the sound go away on its own after time (if you didn't exchange it)?
2) If it's not exchanged, will the problem or sound get worse?
3) Has anyone figured out exactly the root cause of this sound?
Thanks everyone!
dustrho said:
Sorry to resurrect an old thread, but my one-week-old G2 is starting to exhibit the same sound when opening the keyboard. This doesn't happen when I close it, just when it opens. It's a very faint clicking sound, nothing too alarming (for the moment anyway), but it just started today. After searching these forums for a similar complaint, I've come across this one and have a few questions to ask.
1) Does the sound go away on its own after time (if you didn't exchange it)?
2) If it's not exchanged, will the problem or sound get worse?
3) Has anyone figured out exactly the root cause of this sound?
Thanks everyone!
Click to expand...
Click to collapse
Anyone?
I'm pretty certain that the sound emitting from my phone is being caused by a spring, but it's hard to pin-point what side of the phone it's coming from. Is there only one spring for the hinge or are there two? I'm not so bothered by the sound (even though it does bother me a bit), but I'm more concerned that this could become a problem for the phone itself (i.e. hinge breaking).
Hope to hear from others regarding this.
dustrho said:
Anyone?
I'm pretty certain that the sound emitting from my phone is being caused by a spring, but it's hard to pin-point what side of the phone it's coming from. Is there only one spring for the hinge or are there two? I'm not so bothered by the sound (even though it does bother me a bit), but I'm more concerned that this could become a problem for the phone itself (i.e. hinge breaking).
Hope to hear from others regarding this.
Click to expand...
Click to collapse
Here is a (with pics) thread detailing tearing down and reassembling the hinge mechanism. The linked thread should answer your questions, but to answer your question quick like there's only one spring for both sides of the hinge.
Hope this helps.
Dammit, I didn't notice it until I saw this thread.
The clicking sound on my DZ was coming from the ribbon. When opening, the ribbon come in contact with the top of the keyboard portion of the device. whatever the ribbon is wrapped or coated in is causing the clicking sound when the keyboard is open, the ribbon lies flat.
Solution: I simply took a damp qtip and whipped the area where the ribbon make contact with the device. Result is no more clicking sound.
fablife said:
The clicking sound on my DZ was coming from the ribbon. When opening, the ribbon come in contact with the top of the keyboard portion of the device. whatever the ribbon is wrapped or coated in is causing the clicking sound when the keyboard is open, the ribbon lies flat.
Solution: I simply took a damp qtip and whipped the area where the ribbon make contact with the device. Result is no more clicking sound.
Click to expand...
Click to collapse
Did you use water or something else? I'm curious to know if it's my hinge or the ribbon cable causing the clicking sound on my hinge. I can't figure out which of the two it might be.
Also, does anyone else think this issue is caused by the vibration feature of the phone? I believe the vibration on this phone is much more powerful than other phones I've owned, and I wonder if that has had an impact on the hinge or spring mechanism. Thoughts?
dustrho said:
Did you use water or something else? I'm curious to know if it's my hinge or the ribbon cable causing the clicking sound on my hinge. I can't figure out which of the two it might be.
Also, does anyone else think this issue is caused by the vibration feature of the phone? I believe the vibration on this phone is much more powerful than other phones I've owned, and I wonder if that has had an impact on the hinge or spring mechanism. Thoughts?
Click to expand...
Click to collapse
I justed a little water - I just made the tip damp - not dripping wet because I was cleaning where the ribbon makes contact with the device - I did not want to use any sort of chemicals - plain water did the trick.
I agree with you on the haptic feedback; I would love to turn in off completely if someone knows how to do that on the stock Bell DZ Rom, please do tell.
Warning: Cannot be undone! may void warranty
Hi guys,
I scratched my earpiece grill with a pin by mistake while trying to clean it, there were only a few scratches and it was looking bad, so I decided to take all the paint from the speaker grill.
I think it looks very similar to the EVO
http://static.intomobile.com/wp-content/uploads/2010/06/sprint-htc-evo-4g-review-3.jpg.
What do you guys think?
Again, be advised that if you try this, it cannot be undone. I did it by mistake
Pretty cool. I liked it.
You did ****itup on the left side. i did the same with a small torch going true the sides gentel.
Billow said:
You did ****itup on the left side. i did the same with a small torch going true the sides gentel.
Click to expand...
Click to collapse
That's right applied too much pressure.
I was trying to take the dust with a pin from the led notification as it became barely noticeable. Actually that's how everything started.
I can't really see the difference sorry. But hey, any sort of modding is something to be proud of, cuz not everyone can do it. :3
Does your S5 battery door creak/squeak when you put pressure in certain areas?
I have one that does creak/squeak when you put pressure where the Samsung logo is (under the auto focus), and another S5 that doesnt.
Does yours?
Put a good amount of pressure - is this normal?
Is your snapped on properly?
Sent from my SM-G900P using Tapatalk
Nope, mine doesn't make any noise at all when I put pressure on it. Like eyecon said above, you sure it's on securely? If so, perhaps there's a defect with your back cover. But yeah, that's definitely not normal behavior.
Ya if it squeaks, I'd get it exchanged since it may not be closing and snapping in properly, thus negative the water resistant seal
Sent from my SM-G900P using Tapatalk
no issues here, my battery door is strongly in place. But i do have some doubt about the rubber gasket in the back, if you guys want to take a look at my thread and post your findings it would be greatly appreciated
http://forum.xda-developers.com/showthread.php?t=2716219
U should get it exchanged with warranty.This should not happen.
Sent From HTC One Android Revolution 62.0 KitKat 4.4.2. Sixth Sense
BrandonPrice31 said:
Does your S5 battery door creak/squeak when you put pressure in certain areas?
I have one that does creak/squeak when you put pressure where the Samsung logo is (under the auto focus), and another S5 that doesnt.
Does yours?
Put a good amount of pressure - is this normal?
Click to expand...
Click to collapse
Mine does. I went to the store and asked for another to check on it and it did the same thing in the same location (in the middle of the power button side). I switched two covers on two phones and all combinations were with the exact same problem. Guess a bad batch or who knows what. It's driving me crazy . I'm waiting for my UAG case which I guess will cover up the issue.
Mine does. And it irritates me like anything. Going to the store to get it replaced.
Anyone else with this problem?
Sensamic said:
Anyone else with this problem?
Click to expand...
Click to collapse
If you have it go to your store and change it.
I have try that in the store and my was fine, but try it on the spot, so you don't have to go back again
I have the same problem and the Samsung support mean to me, I must send my phone to the Samsung repair. They are crazy, I don't like to send the complete phone to change 1 back cover, next week I wend to the provider where I bought the phone and then I see, maybe they'll change the cover
Yup, have that too but it doesn`t bother me a bit. I use a flipcase or s-view case anyway.
My wireless charging back cover creaks like mad. Worse place are just below the power button and above the camera lens.
Sent from my SM-G900F using Tapatalk
A phone that creaks bothers me a lot.
Today I started to notice this on my s5. It's mostly on the right side, but it can squeak a little if pressed in the middle. It's not something that is very audible but what worries me is if waterproofing is compromised or not.
Also, it's fully snapped on and o checked that multiple times
EDIT : Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not. Is it normal for water to enter there? Or is there a problem in the case?
Also, in most all of the inserts the cover clicks when i put it back on, except on that right side that i mentioned. Funny enough, the water leak on the heart rate sensor is on the left side of it.
griffin_1 said:
Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not.
Click to expand...
Click to collapse
Anyone can tell me if this is "normal" or if i should take it to warranty? Is a back case even covered under warranty?
griffin_1 said:
Today I started to notice this on my s5. It's mostly on the right side, but it can squeak a little if pressed in the middle. It's not something that is very audible but what worries me is if waterproofing is compromised or not.
Also, it's fully snapped on and o checked that multiple times
EDIT : Just noticed that pressing on the heart rate area, the case gives in a bit and has a small gap. I poured a bit of water on top of it to see if it would leak a lot of water (haven't used the phone on water or tested the waterproof before) and after i take out the case a bit of water entered through there. It wasn't much, but maybe if it was submerged in a bit more water it would leak more inside and i don't know if it would reach the battery or not. Is it normal for water to enter there? Or is there a problem in the case?
Also, in most all of the inserts the cover clicks when i put it back on, except on that right side that i mentioned. Funny enough, the water leak on the heart rate sensor is on the left side of it.
Click to expand...
Click to collapse
Mine creaks on the right side as well, and I made sure the case is fully snapped all around. And just like yours, in most all of the inserts the cover clicks when i put it back on, except on that right side. Its annoying at times, but I learned to ignore it most of the time. I wnot bother exchanging or returning. Had the phone for couple months now.
crazyalee said:
Mine creaks on the right side as well, and I made sure the case is fully snapped all around. And just like yours, in most all of the inserts the cover clicks when i put it back on, except on that right side. Its annoying at times, but I learned to ignore it most of the time. I wnot bother exchanging or returning. Had the phone for couple months now.
Click to expand...
Click to collapse
Its something that only a few people seem to experience because i haven't found many reports of it, only a few. Probably some batches of phones with a production problem or not so good quality control, i don't know =/ But i do know that all the clips are snapped on or at least look like it.
I actually contacted Samsung about it but got the generic and expected reply to take it to a repair center to analyse the phone - which i didn't. My main concern would be any problems with waterproofing, but i just putted on a case and don't think much about it now actually.
Hi All
Yesterday while playing with my phone and after becoming a victim of the low speaker volume post dipping in water, I just found out that the external speaker's volume can be increased* on par with other competitor manufacturer phone by this method.
*Note: You WILL lose the waterproofness feature of the phone by doing this. Do this only if you're sure that you're not going to dunk your phone in the water the next time you want to show off. You have been warned.
So for this mod, all you need is a tiny sharp pin, gentle hands and patience.
I do not have any pictures to post at the moment but I guess this is a fairly simple task and anyone can perform it.
Using the sharp pin, pry out the shiny plastic frame just at the end of the external speaker. Only pry out the length of the speaker and not any longer because it's unnecessary. Then, you can find a tiny strip of micro porous membrane. This is what protects the phone from water ingress at the speaker output. Carefully peel out the membrane ensuring that it's not being damaged while you do this.
Just to confirm that this mod actually does help, you can perform your own test. Play your favourite song in Walkman, and peel and unpeel the membrane and notice the difference in sound output.
This mod will also help people who have very low volume after dipping the phone in water. Just peel the membrane a bit and then reattach it properly ensuring its properly sealed. This should solve your low volume problem. Press the frame material by applying force at the speaker area to seal the frame properly.
There you have it, it's not that the speaker is crap or the volume is too low in this phone. Things have been kept to a maintain a balance between durability and function.
Please do let me know if you like this mod and if it has helped you, hit the thanks button.
Has anyone tried this yet?
Does going too loud not damage the internals against which it was designed for? Not to mention the waterproofing being gone now.
iDroid8 said:
Does going too loud not damage the internals against which it was designed for? Not to mention the waterproofing being gone now.
Click to expand...
Click to collapse
No iDroid8, the internals are not damaged by doing this mod, you're just opening up the more obstructed sound caused due to the waterproof flaps that are present in the Xperia Z.
This mod does not do anything to the speaker itself, the speaker works as stock but the sound is improved due to the much better opening created.
And Yes, as mentioned in the mod itself, this makes you lose the waterproof feature but this mod is for people who really want a louder phone and can live without the waterproofness feature.
you sure that's not just a dust filter?
There was a post some time ago from someone who'd dismantled their XZ and found a small piece of polycarb protecting the speaker that affected the volume.
http://forum.xda-developers.com/showpost.php?p=45115265&postcount=9
Possibly easier to link to the complete thread, http://forum.xda-developers.com/xperia-z/general/xperia-z-damn-loud-mods-t2419635
fards said:
you sure that's not just a dust filter?
There was a post some time ago from someone who'd dismantled their XZ and found a small piece of polycarb protecting the speaker that affected the volume.
http://forum.xda-developers.com/showpost.php?p=45115265&postcount=9
Possibly easier to link to the complete thread, http://forum.xda-developers.com/xperia-z/general/xperia-z-damn-loud-mods-t2419635
Click to expand...
Click to collapse
I'm not sure about what's mentioned in that thread. There the backplate itself was removed. It could as well be the similar thing but I just accessed the mesh filter that we can see from outside near the speaker area. It might as well be a dust filter but then where's the water being stopped? Does it go into the mesh and then stop somewhere inside?
Just thought you all would like to take a little look under the cover of the Blackberry Priv. Apologies for image quality and lack of complete disassembly, I didn't want to burn my bridges for the warranty just for opening the back cover. If any of you are braver than I and feel like delving deeper, taking the cover is very easy. Just pry the left and right sides away with your fingernails so it is loose. Remove the SD card and SIM card tray. Then very carefully pry the top of the cover away from the device. Then simply slide the slightly tilted cover off the bottom, away from the speakers. From there you can see all the goods! I was just curious if I could find a discernible difference between the Samsung S series antennas and the Priv, for the sake of future MFT compatibility. It seems as though they both have the same antennas so the hardware difference must be chip-level. Bummer. Also you can see why the right side gets so hot with the battery and antennas sitting there.
Pics
What does the front bottom look like? I'm curious how big the speaker is.
Xaiux said:
What does the front bottom look like? I'm curious
Click to expand...
Click to collapse
...Giggedy!!
The front bottom is taken up by the speaker assembly, it's relatively large; it fills the entire bottom lip of the back case.
Do you have a US or EU model?
Thanks. I've been waiting for internal shots.
ToniCipriani said:
Do you have a US or EU model?
Click to expand...
Click to collapse
I have the US model from AT&T.
I was thinking about opening the back and filling the empty space that plague the non-wireless charging variants of this phone
t_0_0_l said:
The front bottom is taken up by the speaker assembly, it's relatively large; it fills the entire bottom lip of the back case.
Click to expand...
Click to collapse
Can you test the speaker? Reports online, including my own Priv, only the left works(Mono), but in this picture it shows the Priv having both Left and Right speakers. Can you take a picture of the front of the phone where the speakers are?
I'm confused as to why they would include L & R stereo speakers but only the Left works, is the R disabled? or did we all get Priv's that are defective. I had a feeling the whole bottom was a speaker grill, and this confirms it......
The whole bottom is definitely not a speaker. It's only the left third or so.
dc2000 said:
Can you test the speaker? Reports online, including my own Priv, only the left works(Mono), but in this picture it shows the Priv having both Left and Right speakers. Can you take a picture of the front of the phone where the speakers are?
I'm confused as to why they would include L & R stereo speakers but only the Left works, is the R disabled? or did we all get Priv's that are defective. I had a feeling the whole bottom was a speaker grill, and this confirms it......
Click to expand...
Click to collapse
I also want to know the answer to this. Are units defective? It definitely shows two so why does everyone only hear mono sound from the left?
I don't think there's anything of the sort going on. Based on the pictures, since I'm not confident enough to peel the back off my own Priv, it looks like the thing you see on the right (left in the pic) is the control board for the 3.5mm jack combined with the mic, which presumably exists down there, since there's no other spot at the bottom of the unit where a mic could possibly be. It definitely only has the one speaker, but as far as I'm concerned, it's pretty exceptional for a phone. At least, I have no qualms with the sound from it, certainly much louder than any other phone I've had.
Forgot to add, I'm also confident that there's only one speaker because using Poweramp and toggling the Mono output setting, as well as the balance from Left to Right, everything only sounds like it comes from the one speaker.
Sorry guys, my mistake. I hadn't even tested my speakerphone until today. I based my assumption on the fact there is a baffle material under the span of the case baffle and the "L" and "R" label on the plastic assemblies on the board. I hadn't tried to disassemble it further. There is someone on YouTube that will give a complete teardown in a couple of days so if I don't see it posted I'll crack my phone open again to investigate.
That escalated quickly
gtfo of xda
gof!uckyourself said:
You can all suck my ****, you pricks. Your a bunch of wankers who are living in a basement. Go and get outside into the real world you low life mutant pricks. There's more to life than a spiders cobweb, and your dusty seats, also light exists. Nobody likes basement-dwelling losers who haven't seen a light before, except your screen. Cobwebs sure are nice aren't they? It's what you have for your meals. Now go **** yourselves you nerds, and go and eat some dog ****.
Click to expand...
Click to collapse
oh wow you enlightened me! Thanks!
Great!
I just can't believe the OEM cover already scratches the Priv, I can see where are the pressure point of the plastic in just 2 days....
That is why I hate Hard Cases.
TheGeeZus said:
Great!
I just can't believe the OEM cover already scratches the Priv, I can see where are the pressure point of the plastic in just 2 days....
That is why I hate Hard Cases.
Click to expand...
Click to collapse
Just remove from the case and pull plastic button inserts out. Take a mini philips screwdriver like for eyeglasses and scrape the little piece of plastic out on both sides. There will be 2 on left and 2 on right then use super glue to adhere the plastic buttons directly to where the little plastic pieces were above and below the buttons. It works for me and no indentions.
momulah said:
Just remove from the case and pull plastic button inserts out. Take a mini philips screwdriver like for eyeglasses and scrape the little piece of plastic out on both sides. There will be 2 on left and 2 on right then use super glue to adhere the plastic buttons directly to where the little plastic pieces were above and below the buttons. It works for me and no indentions.
Click to expand...
Click to collapse
Should have done that before but I am humanly struggling with my "OCD" and trying to forget about it, but will leave it like that as the damage is already done and I really want to save the hassle with an exchange.
Thanks for the tip anyways
TheGeeZus said:
Should have done that before but I am humanly struggling with my "OCD" and trying to forget about it, but will leave it like that as the damage is already done and I really want to save the hassle with an exchange.
Thanks for the tip anyways
Click to expand...
Click to collapse
I think they addressed the problem because the rivets on the one I received the other day were flat as heck and did not protrude like photos I've seen. There wasn't anything to cut with an exacto even if I wanted to. It's still a plastic piece of junk though ($40?!) and I decided to just use a pocket pouch...brings me back to the G1 days
BlueEditionE6 said:
oh wow you enlightened me! Thanks!
Click to expand...
Click to collapse
What in the name of cobwebs happened here!