Database Users

[Q] Trying Nexus S in dual boot mode ---- big mess up

Hi Folks,
M relatively very new to android usage. I recently brought Samsung Nexus S which I loaded with MIUI to experiment and experience a richer UI feel. However, it didn't work too well for me due to stability issues like message keeps crashing even after applying mms.apk patch.
Well after been thru with the experiment, I want to get back to stock ROM which came with Nexus S. I referred to the forum link but I keep getting an error as installation failed in recovery mode. Is there something wrong that I am doing. Some One please help!!!!!
It would be great if I can have my nexus S on dual boot with both MIUI and Stock ROM installed and I having option to chose one while booting the phone.. However, that is not a must have....
Must have is only a way to get back to Stock ROM for Nexus... All help very much appreciated.
<Many Thanks to all...

You know that the Nexus S rewrites the stock recovery over every boot (unless you rename it) Can you boot into fastboot? And reflash CWM?
Sent from my NS (no it's NOT SNS or GNS)

Moved to Nexus S forums for better exposure.

To get back to stock:
a) boot into fastboot mode (vol up + power on)
b) flash cwm recovery via adb console (fastboot flash recovery recoveryname.img) (recovery file has to be inside the /tools folder in adb)
c) go into cwm recovery
d) mount usb storage
e) after pop up on pc: copy the the correct zip for your NxS type on your sdcard/usb storage. Download it from here: http://forum.xda-developers.com/showthread.php?t=1056062
f) unmount usb storage
g) stay inside the recovery menu, but go to install from zip menu
h) navigate to the zip file you downloaded and placed on your usb storage at e)
i) confirm the installation and wait for it to finish
j) move to top recovery menu, choose reboot and you're done, stock Android 2.3.4
If you get any unknown device errors you're missing usb drivers for your phone mostlikely, get them from the guides on this forum.
If everything else fails you. Go to www.samfirmware.com > Toolbox > firmware > etc > choose correct firmware for your NxS model. After downloading Odin itself from samfirmware.com (Toolbox > programs) as well.
Start Odin, there should be a yellow field with a port number (if not you're missing drivers). Make sure only "Auto reboot" and "F. Reset time" are checked. Add the correct files from the zip you got off samfirmware.com. Bootloader belongs to Bootloader, PDA to PDA and Phone to Modem. CSC can be left empty, it'll just change the carrier info inside the bootloader. Press "Start", wait for Odin to finish, it'll say when it's done (takes ~2-3mins, yellow field is now blue and says "Pass").

rentaric said:
To get back to stock:
a) boot into fastboot mode (vol up + power on)
b) flash cwm recovery via adb console (fastboot flash recovery recoveryname.img) (recovery file has to be inside the /tools folder in adb)
c) go into cwm recovery
d) mount usb storage
e) after pop up on pc: copy the the correct zip for your NxS type on your sdcard/usb storage. Download it from here: http://forum.xda-developers.com/showthread.php?t=1056062
f) unmount usb storage
g) stay inside the recovery menu, but go to install from zip menu
h) navigate to the zip file you downloaded and placed on your usb storage at e)
i) confirm the installation and wait for it to finish
j) move to top recovery menu, choose reboot and you're done, stock Android 2.3.4
If you get any unknown device errors you're missing usb drivers for your phone mostlikely, get them from the guides on this forum.
If everything else fails you. Go to www.samfirmware.com > Toolbox > firmware > etc > choose correct firmware for your NxS model. After downloading Odin itself from samfirmware.com (Toolbox > programs) as well.
Start Odin, there should be a yellow field with a port number (if not you're missing drivers). Make sure only "Auto reboot" and "F. Reset time" are checked. Add the correct files from the zip you got off samfirmware.com. Bootloader belongs to Bootloader, PDA to PDA and Phone to Modem. CSC can be left empty, it'll just change the carrier info inside the bootloader. Press "Start", wait for Odin to finish, it'll say when it's done (takes ~2-3mins, yellow field is now blue and says "Pass").
Click to expand...
Click to collapse
I am able to get in cwm and perform a fastboot. unfortunately, I keep getting error when i select the zip file to install the stock rom.

a) you downloaded a corrupted file (compare mp5 tags if possible)
b) you downloaded the wrong rom for your device
c) the rom has to be in the top folder of the sdcard/usb storage
d) did you unmount the usb storage after copying the file onto your phone?
I am able to get in cwm and perform a fastboot.
Click to expand...
Click to collapse
This makes me wonder though, you mixed up the order? Booting into fastboot is performed before flashing/entering cwm recovery.

[HOWTO] All-in-One Guide to Flashing your first ROM

This is an effort to write a comprehensive all-in-one guide (for newbies too) to flash ROMS on Huawei S7 Slim 201.
First and foremost you have to root your device (so that you can use certain applications e.g. ROM Manager, Titanium Backup). Do the following:
1. Download SuperOneClick (google it) and extract the files
2. Install Huawei Ideos S7 Slim drivers to your computer (if you have not done it already).
3. Connect your device to your computer via USB. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging.
4. Run SuperOneClick.exe. Disable your Antivirus program before running SuperOneClick (optional but helpful). If the drivers for your device are not installed, SuperOneClick will prompt you to let it find the drivers itself. Press yes and let it continue.
5. Click the root tab. (For my device I had to click root several times because the process got stuck, but eventually it succeeded)
6. After the rooting process ends, reboot your device.
Important notice: Although SuperOneClick confirmed twice that the device was rooted, Titanium Backup could not confirm root. If anyone knows of another way please advise.
Now, in order to flash ROMs do the following:
First of all, you have to install ClockworkMod Recovery on your device. (This will help you to perform many other tasks)
There are two versions of ClockWork Recovery (that I know of).
First one is v2.1.5.8
1. Download the recovery zip (201u.7z) from the attachments .
2. Extract the file.
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8. With the USB cable connected run reboot into recovery.cmd (from the unzipped files). In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button anchoosing Reboot> Recovery)
9. When you see the ClockworkMod recovery menu, use the volume up and down keys so many times until the message “back menu button enabled” appears at the end of the screen. Now you can use the power button as ENTER. (This is something you will have to do every time you enter recovery mode, unfortunately too)
Second one is CWM-based Recovery v6.0.1.2. (credit to WRCODE over at the androidtablets.net that mentioned it)
1. Download the recovery rar (install.rar) from the attachments.
2. Extract the file. (you will find no reboot into recovery.cmd in those files so, either use the one mentioned above, or use ROM Manager or GooManager (from Play Store) to reboot into recovery. Note: Those managers require rooting your device)
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8a.With the USB cable connected run reboot into recovery.cmd . In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button and choosing Reboot> Recovery).
8b. Use ROM Manager or GooManager and select reboot recovery.
(this recovery version does not require anything in order for the power button to act as ENTER)
Having successfully flashed ClockworkMod Recovery, you are now ready to flash your custom rom.
1. Find the ROM that best suits you, download it and place the .zip file at the root of your internal SD Card.
2. Enter recovery mode (as explained above) and select wipe data/ factory reset. Once this is done, select wipe cache partition. Once this is done select advanced and then select wipe Dalvik cache. (very important to do all of these steps)
3. Go back at the original menu and select install zip from sdcard. Select choose .zip from sdcard. Select the .zip file that you placed at the internal SD card (make sure that it is the correct one) and press the power button for ENTER.
4. Once the ROM has been successfully flashed select reboot system now and press the power button.
If everything went ok, after a few minutes you will have your first glimpse of your new custom ROM.
Enjoy it and remember “Use the above instructions at your own risk.”

Moving to General.

usb driver for win7
hello. i've been using this tab for a while and would like to root it. sadly when i connected the usb cable to the tab the driver is not installed automatically. so i think maybe i have to install it on my own. but i can't find the driver anywhere, even the official website of huawei. (the page is available but when trying to download, it show "Service Temporarily Unavailable - The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.")
therefore i would like to request if anyone would be kind enough to upload the driver for me to proceed rooting this device.
thanks in advance.

shawn1968 said:
This is an effort to write a comprehensive all-in-one guide (for newbies too) to flash ROMS on Huawei S7 Slim 201.
First and foremost you have to root your device (so that you can use certain applications e.g. ROM Manager, Titanium Backup). Do the following:
1. Download SuperOneClick (google it) and extract the files
2. Install Huawei Ideos S7 Slim drivers to your computer (if you have not done it already).
3. Connect your device to your computer via USB. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging.
4. Run SuperOneClick.exe. Disable your Antivirus program before running SuperOneClick (optional but helpful). If the drivers for your device are not installed, SuperOneClick will prompt you to let it find the drivers itself. Press yes and let it continue.
5. Click the root tab. (For my device I had to click root several times because the process got stuck, but eventually it succeeded)
6. After the rooting process ends, reboot your device.
Important notice: Although SuperOneClick confirmed twice that the device was rooted, Titanium Backup could not confirm root. If anyone knows of another way please advise.
Now, in order to flash ROMs do the following:
First of all, you have to install ClockworkMod Recovery on your device. (This will help you to perform many other tasks)
There are two versions of ClockWork Recovery (that I know of).
First one is v2.1.5.8
1. Download the recovery zip (201u.7z) from the attachments .
2. Extract the file.
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8. With the USB cable connected run reboot into recovery.cmd (from the unzipped files). In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button anchoosing Reboot> Recovery)
9. When you see the ClockworkMod recovery menu, use the volume up and down keys so many times until the message “back menu button enabled” appears at the end of the screen. Now you can use the power button as ENTER. (This is something you will have to do every time you enter recovery mode, unfortunately too)
Second one is CWM-based Recovery v6.0.1.2. (credit to WRCODE over at the androidtablets.net that mentioned it)
1. Download the recovery rar (install.rar) from the attachments.
2. Extract the file. (you will find no reboot into recovery.cmd in those files so, either use the one mentioned above, or use ROM Manager or GooManager (from Play Store) to reboot into recovery. Note: Those managers require rooting your device)
3. Make sure you have activated USB Debugging on your device. Go to settings > applications > development > tick on USB Debugging
4. Turn off your device and connect it to your computer via USB.
5. Press the volume up key and the power key at the same time until the device enters fastboot mode.
6. Run install.bat (from the unzipped files)
7. When the process ends, reboot your device.
8a.With the USB cable connected run reboot into recovery.cmd . In the window that will open on the PC, type “adb reboot recovery” without the quotation marks and your device (after a few seconds) will enter recovery mode. (This is something you will have to do every time you enter recovery mode, unfortunately, unless you upgraded to CM9 or CM10 where you can boot to recovery by long pressing the power button and choosing Reboot> Recovery).
8b. Use ROM Manager or GooManager and select reboot recovery.
(this recovery version does not require anything in order for the power button to act as ENTER)
Having successfully flashed ClockworkMod Recovery, you are now ready to flash your custom rom.
1. Find the ROM that best suits you, download it and place the .zip file at the root of your internal SD Card.
2. Enter recovery mode (as explained above) and select wipe data/ factory reset. Once this is done, select wipe cache partition. Once this is done select advanced and then select wipe Dalvik cache. (very important to do all of these steps)
3. Go back at the original menu and select install zip from sdcard. Select choose .zip from sdcard. Select the .zip file that you placed at the internal SD card (make sure that it is the correct one) and press the power button for ENTER.
4. Once the ROM has been successfully flashed select reboot system now and press the power button.
If everything went ok, after a few minutes you will have your first glimpse of your new custom ROM.
Enjoy it and remember “Use the above instructions at your own risk.”
Click to expand...
Click to collapse
it can work with Ideos S7-201U ???
im newbie here
thx u

hey can you please make a video on this i got stcuk on the part where you run reboot into recovery.cmd
EDIT: nevermind i figured it out now but a video might be nice for some people

Need driver for win7 x64,worked on vista without any drivers being installed for it :/

Huawei Ideos s7 slim
ok,i manage to do only first part(instal bat) and after its stuck
on my screen says when i start cmd recovery "adb server out of date killing....
daemon stars sucssesfuly
and thats about it,no going to recovery no nothing ..... so any help will be nice..
with regards Nenad

MY HUAWEI IDEOS 201uV100R001C239B010 IS NOT OPENING GOOGLE PLAY STORE ,GAMES AND INSTALLING APPLICATIONS BUT IS PERFORMING GOOGLE AND DOWNLOADING VIDEOS AND GAMES

Device isn't being recognized on fastboot. The drivers I use has worked for all of my devices, except for this one...
:/

g950f firmware rom where can i get it which can easily be rooted?

i need to reinstall the original firmware for g950f but i cant find it anywhere
i want to root my device ... the file i did find doesnt seemt to load up custom roms

https://forum.xda-developers.com/ga...pment/recovery-twrp-galaxy-s8-exynos-t3595102
Guides:
Notice: It may wipe all your data including those in internal storage.
Part 1 - HOW-TO FLASH TWRP:
1. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
2. Go to Settings -> Developer options and enable OEM Unlock option.
3. Download and Install Samsung Mobile Phones Drivers.
- Option 1: Download and Install Smart Switch for PC.
- Option 2: Download and Install standalone driver package.
4. Download and extract Odin (Samsung's Flash Tool) to your computer.
5. Download a .tar image of TWRP.
6. Reboot your device to download mode.
- Hold [VOLUME DOWN] + [BIXBY] + [POWER] for approx. 15 seconds.
- Read the warning carefully.
- If you agree, press [VOLUME UP] to get into Download mode. If you don't agree, STOP.
7. Open Odin and place that TWRP tar file in the [AP] slot.
8. Connect your phone.
9. Hold [VOLUME UP] + [BIXBY] + [POWER] on your phone and then press start on Odin.
10. Wait for the phone to reboot. DO NOT release [VOLUME UP] + [BIXBY] + [POWER] or you may not reboot into TWRP.
Part 2 - HOW-TO INITIALIZE TWRP: (for new phones)
1. If you completed Part 1 successfully, you should be in TWRP now. At this point, you will reach the screen asking you if you want to allow system modifications.
2. Select "Keep /system RO". (Don't swipe right or you may not be able to boot into system if you failed to complete next steps. However, you can swipe right to allow modifications if you are confident that you can complete next steps.)
3. Go to "Wipe" menu of TWRP and you will find "Format Data". Press "Format Data" and type "yes" to continue.
4. Go to "Reboot" menu and Press "Recovery" to reboot TWRP.
5. Download the latest dm-verity and force encryption disabler zip on your computer.
6. Transfer the zip to your phone.
- Option 1: MTP: Connect your phone with computer and just copy the zip to internal storage. (similar to how you transfer files when in system.)
- Option 2: ADB: Connect your phone with computer and run command "adb push /path/to/zip /sdcard/".
- Option 3: External SD: Copy the zip to an external SD and then insert the card to your phone.
7. Go to "Install" menu of TWRP and flash the zip.
TWRP is initialized and fully functional at this stage. Now you can either reboot into system or root, flash custom ROMs via TWRP.
Part 3 - HOW-TO ROOT:
1. Download the flashable zip.
- Option 1: Magisk
- Option 2: SuperSU (untested)
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Part 3a - HOW-TO FLASH CUSTOM ROMS:
1. Download the flashable zip.
2. Transfer the zip to your phone.
3. Go to "Install" menu of TWRP and flash the zip.
Simple.

where can i find firmware original

Sammobile

wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
Samfirm tool or updato.com. No download speed limits

wakkaday said:
where can i find firmware original
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?exact=1&q=SM-G950F
click on your Country and load the firmware.
free and high speed (maybe use download manager)

[GUIDE] (Exynos) TWRP+Magisk updated guide (June 2021)

Magisk+TWRP for Exynos ONLY
Hi, there are some tutorials out here on the forum but some are outdated, others have dead links and other mix some steps from exynos and snapdragon, so this is a guide on how I did it, My device is the International Exynos LTE Dual sim variant or SM-N985F-DS running android 11 (oneUI 3.1) patch from april 2021 with security patch from may 2021 but this has been tested on many exynos variants.
See DR.Ketan post: https://forum.xda-developers.com/t/guide-how-to-root-n20-ultra-n986b-n9860.4147023/
I based my guide on @dr.ketan 's guide and some bits from the comments and references from that post, so all credit goes to him and the people he reference on his post.
First of all as dr.ketan said:
NOTICE :
Before you move further, make clear that rooting device -
- Your warranty will be void
- Some of functions may not work on rooted device, some function may get back with un rooting, some may never.
- All your data on device will be lost
- Flashing custom binaries may brick (Usually soft but can be hard brick too) your device, so follow it on your own risk!
If you are ready with condition, move further -
Click to expand...
Click to collapse
1.- BACK UP ALL OF YOUR DATA, copy your files to a PC, make backups on google and samsung clouds and any other cloud service backup you have (whatsapp for example) becuase in this process all data is wiped TWICE.​
2.- Prepare your PC: ​
I personally recommend using a laptop or a pc with an UPS (backup battery) just to be safe.
2.1 Create a folder fo the files and create 2 folders inside named OLD and NEW (this is merely to keep files organized since they CAN be confused (see next steps), unless said otherwise ALL files and folders go in the OLD folder.
2.2 Download ODIN [CHECK FILES BELOW]
2.3 Download YOUR phone stock firmware (you have several options for this, I personally use sammobile but here you have to google on your own. Remember to extract the contents and you should have 5 files.
NOTE(hehe): to get your exact model name you can check on Settings>About phone>Software information>Baseband version.
2.4 Download Magisk APK and ZIP [CHECK FILES BELOW]
2.5 Download Multidisabler ZIP [CHECK FILES BELOW]
2.6 Download TWRP recovery [CHECK FILES BELOW] and place it in the "NEW" folder you created on step 2.1
IMPORTANT: use only THIS recovery from THIS file, since it's modified for exynos and also to skip a step on the process.
3.- Prepare your Phone:​
3.1 Copy the AP file from your PC (the one from the stock firmware) and the magisk.apk file you downloaded, to your phone.
3.2 Install the magisk app (the apk file)
3.3 Open the magisk app and select the first option, there you will have an option to select a file, select the AP file you copied from your pc an tap continue (or start I dont remember)
3.4 Now you will have a "Masgisk_patched-*********.tar" file on your download folder on your phone, copy that file to your PC and place it in the "NEW" folder you created on step 2.1.
4.- Now we start the process of modifying the phone​
4.1 UNLOCK BOOTLOADER: on your phone go to SETTINGS>ABOUT PHONE>SOFTWARE INFORMATION and tap the "Build Number" repeatedly until you see "You are now a developer" (or something similar)
4.2 Go back to SETTINGS and now you will have at the bottom a new menu called "Developer options", enter and toggle on the OEM unlocking option, this will prompt some warnings and an assistant, follow the instructions and when you finish turn off your phone.
4.3 Press and hold the VOL+ and VOL- buttons at the same time and connect the phone to your PC WHILE HOLDING BOTH BUTTONS, this will prompt DOWNLOAD MODE on your phone and you will see 3 options, Press and hold the VOL+ button to unlock the bootloader, now your phone will reboot and wipe all of your data.
4.4 Confirm OEM Unlock is enabled: after the reboot you will get the initial setup process again (as if the phone were new) skip though all (because it will be wiped again) and repeat the process on step 4.1
Now the OEM unlock setting should be GRAYED OUT and with this your phone is ready to be modified
5.- Flashing custom binaries​
5.1 Turn off the phone and put it into DOWNLOAD MODE again (see step 4.3) but this time use the first option, that is, press the VOL+ button ONCE, this will enter DOWNLOAD mode and put the phone in flashing state.
5.2 Open ODIN on your PC as administrator
5.3 On the Options tab UNTICK the "Auto Reboot" option
5.4 Click on the AP button and locate the "Masgisk_patched-*********.tar" on the "NEW" folder.
5.5 Click Start, wait until you see PASS on the top left corner
5.6 Click on the AP button again and locate the "Exynos no vbmeta recovery.tar" file on the "NEW" folder.
5.7 Click Start, wait until you see PASS on the top left corner.
5.8 THIS STEP IS CRITICAL: disconnect your phone from your PC, now READ AHEAD before doing anything.
Here you will have to do a combination of button presses to boot into recovery. Once your phone is disconnected press and hold VOL- and POWER BUTTON (side key) for approximately 7 seconds, once the phone screen goes black immediately release the VOL- button and press the VOL+ button WHILE KEEP PRESSING THE POWER BUTTON. You will see 1 or 2 warning and a glimpse of the samsung logo, keep pressing the buttons until you see the TWRP (Team Win Recovery) splash screen, at this point you can release the buttons.
5.9 now in the recovery navigate to WIPE tab > FORMAT DATA > and type yes to continue (read instructions on screen). DO NOT RESTART. go back to the starting screen and then navigate to REBOOT > REBOOT TO RECOVERY.
5.10 Your phone will reboot into recovery on its own, no need to press any buttons.
5.11 Once inside the Recovery, connect the phone to your PC, after a few seconds the phone will connect normally as if it were in the OS, now copy this files to your phone from your PC:
Magisk.zip
Multidisabler-samsung-3.1.zip
5.12 Go to INSTALL tab on your phone and select the multidisabler zip and install it (it will prompt you to swipe to install), once finished tap on WIPE CACHE/DATA.
5.13 Now do the same with magisk.zip but this time DO NOT tap the "wipe cache/data" button, instead tap on REBOOT.
6.- First Boot​
NOTE: First boot takes a while but if your phone is not showing the initial setup screen in max 15 minutes something went wrong and you will have to flash back to stock firmware and start over.
6.1 Once you boot do the usual initial setup, here you can do it normally and restore your cloud backups.
6.2 When you are all set up, look for the MAGISK app, open it and follow the instructions. Your phone will reboot so make sure you are all set up BEFORE opening the app.
6.3 ALL DONE!​

Hi there,
Thanks for the updated guide!
Maybe worth mentioning that when done, to get back into TWRP power down phone -> connect USB ->press & hold Power AND VOL- until black screen (7sec) -> Quickly press VOL+ with still holding Power button.
Would you know how to update firmware to latest security patches (downloaded from SamMobile for example) now phone is rooted with Magisk, with TWRP recovery and multidisabled?
Regards,

I followed all directions, and Magisk and TWRP are installed. However, I do not have root access. I have an S10e (SM-G970F, Exynos). To get root access, you have to do the bixby, volume up, and power together. I always get to TWRP. When I had only Magisk installed, I always got stock recovery. How do I get the keys correct?

Also, I understand you must have something in the USB port. I tried mostly connected to the computer, sometimes to a charger, and sometimes not at all. Nothing can get Magisk root access unless it boots me to recovery, and then I can just reboot to system (no root) or recovery (same place, still no root).

Threx71 said:
IMPORTANT: use only THIS recovery from THIS file, since it's modified for exynos and also to skip a step on the process.
Click to expand...
Click to collapse
Where is this TWRP file?

DAVIRO1 said:
Where is this TWRP file?
Click to expand...
Click to collapse
Weird, it was together with all the other files, I'll re-upload it when I get home.

josephgrab said:
Also, I understand you must have something in the USB port. I tried mostly connected to the computer, sometimes to a charger, and sometimes not at all. Nothing can get Magisk root access unless it boots me to recovery, and then I can just reboot to system (no root) or recovery (same place, still no root).
Click to expand...
Click to collapse
Only thing I can think of is you are not flashing the correct magisk zip file on TWRP, try downloading it from magisk's official site. Is the same file for the both procedures, you just have to change the file extension accordingly (.apk or .zip)

Threx71 said:
Weird, it was together with all the other files, I'll re-upload it when I get home.
Click to expand...
Click to collapse
thanks, I have all the files ready to do the flash,

DAVIRO1 said:
thanks, I have all the files ready to do the flash,
Click to expand...
Click to collapse
here you go
Exynos no vbmeta recovery.tar
drive.google.com
EDIT: why the f is xda deleting the file after uploading?

I tried that file. First, I could not flash with odin 2 recovery.img . I used 7-zip to archive it as .tar, and it still would not flash. I do have an SM-G970F, so it is Exynos. I am not sure of the results, but I did flash with newest twrp-3.5.2_9-5-beyond0lte.img.tar .

Threx71 said:
5.6 Click on the AP button again and locate the "Exynos no vbmeta recovery.tar" file on the "NEW" folder.
Click to expand...
Click to collapse
What is this file?

DAVIRO1 said:
What is this file?
Click to expand...
Click to collapse
Here
Exynos no vbmeta recovery.tar
drive.google.com

josephgrab said:
I tried that file. First, I could not flash with odin 2 recovery.img . I used 7-zip to archive it as .tar, and it still would not flash. I do have an SM-G970F, so it is Exynos. I am not sure of the results, but I did flash with newest twrp-3.5.2_9-5-beyond0lte.img.tar .
It was the wrong file, this is the correct one:
Exynos no vbmeta recovery.tar
drive.google.com
Click to expand...
Click to collapse

After flashing that, it would not boot to recovery but just to download.

Thanks! Worked for me! I have a question:
do you know how to Bypass root detection for bank app?

After I flash Exynos no vbmeta recovery.tar this is the error I get
Couldn't find grp7 symbol in main dtb
failed to permorm fixtps in overlay
ufdt overlay apply fail
UFDT DT Overlay FAIL
need kernel: could not find do normal text
vbmeta: Error verifying vbmeta image
vbmeta VERIFICATION_DISABLE bit is set
CUSTOM VBMETA
VBMETA
I cannot read everything it is so small, so there may be some typos

I found out what I did wrong. I am using SM-G970F (S10e), whereas this forum is for SM-N985F.
Great instructions, though.
Thank you. Just wish I could get root. I cannot because of the updated firmware (August 2021).

Hello, thank you for the guide it worked to root my sm-n986b !
Threx71 said:
5.6 Click on the AP button again and locate the "Exynos no vbmeta recovery.tar" file on the "NEW" folder.
5.7 Click Start, wait until you see PASS on the top left corner.
5.8 THIS STEP IS CRITICAL: disconnect your phone from your PC, now READ AHEAD before doing anything.
Here you will have to do a combination of button presses to boot into recovery. Once your phone is disconnected press and hold VOL- and POWER BUTTON (side key) for approximately 7 seconds, once the phone screen goes black immediately release the VOL- button and press the VOL+ button WHILE KEEP PRESSING THE POWER BUTTON. You will see 1 or 2 warning and a glimpse of the samsung logo, keep pressing the buttons until you see the TWRP (Team Win Recovery) splash screen, at this point you can release the buttons.
Click to expand...
Click to collapse
There is just this part that I did differently.
First, to start flashing the twrp at step 5.6 I had to restart the phone in download mode because odin would be stuck at "setup connection" if i tried to flash it just after the file before.
And at step 5.8 I had to keep the phone connected to the PC otherwise it would not boot in recovery menu.
I did all the phone setup and installed "Riru" then "Universal SafetyNet Fix" magisks modules to pass the Safetynet.
I just have one question if someone can tell me if there is a way to not display the bootloader warning message when the phone is booting please.

lilstyle974 said:
I did all the phone setup and installed "Riru" then "Universal SafetyNet Fix" magisks modules to pass the Safetynet.
I just have one question if someone can tell me if there is a way to not display the bootloader warning message when the phone is booting please.
Click to expand...
Click to collapse
I have installed drketanrom and there are a tweak that delete this message.

lilstyle974 said:
Hello, thank you for the guide it worked to root my sm-n986b !
There is just this part that I did differently.
First, to start flashing the twrp at step 5.6 I had to restart the phone in download mode because odin would be stuck at "setup connection" if i tried to flash it just after the file before.
And at step 5.8 I had to keep the phone connected to the PC otherwise it would not boot in recovery menu.
I did all the phone setup and installed "Riru" then "Universal SafetyNet Fix" magisks modules to pass the Safetynet.
I just have one question if someone can tell me if there is a way to not display the bootloader warning message when the phone is booting please.
Click to expand...
Click to collapse
Thanks, I was just about to post this about the safety net since I just did it yesterday to start using google pay.
I'll add it to the Post as EXTRAS along with some other things.
Also sorry to everyone for having this thread so abandoned, I used to get so much spam from XDA that I ended up blocking all emails (?

At my wits end

So I'm trying to get Magisk installed on my bootloader/OEM Unlocked S10+ (SM-G975F beyond2lte) device.
I can do that fine by downloading the latest official firmware for my device, installing that (BL/AP/CP/CSC) through Odin v3.14.
That installs fine.
Then I sideload Magisk v23.0, and the AP file I just flashed via Odin over adb via push.
I install Magisk, recovery-patch the AP file, usd adb to pull the file back over onto my desktop. I restart the phone in download mode and once again populate Odin with the BL/AP/CP/CSC files, but this time the AP file is the one I got from Magisk.
Start that, let Odin restart my phone whilst I'm holding Bixby/Power-Up/Power, I release those three once the bootloader warning message comes up.
I set the phone up like normal, but there's the issue - my 128GB device only reads as having 32GB - I can setup Magisk fine, it asks me to download an extra bit, then auto-restarts the phone after 5 seconds.
Yay, I have root! Boo, I'm missing 96GB of free space...
I've read that installing TWRP can help fix this, fair enough, I try to install TWRP (I've tried through both the "dd" method via adb shell, and patching the twrp 3.5.2_9-3 via Magisk, and installing with vbmeta over Odin), but that then eliminates Magisk.
I've been trying this now for days, literally days, reading through different forum posts, detailing my steps to myself in notepad++ step-by-step so I can see what it is I'm doing.
I'm left with zero clue what to do now except reach out and hope for some help from this forum.

Should have known... Now that I've posted on XDA it's fixed... In-case anybody else is having trouble here are the steps I've written down for myself.
Phone is S10+ SM-G975F (beyond2lte) - Bootloader / OEM Unlock is already unlocked.
******************************************************************
FLASHING STOCK ROM (ALWAYS GOOD PLACE TO START):
******************************************************************
1. Phone into Download mode (Vol Down + Bixby button, insert USB (Don't use power button))
2. Odin, AP in AP, BL in BL, CP in CP, CSC in CSC (NOT the HOME one). USERDATA stays EMPTY!
3. Phone may restart/erase several times, in the end inbuilt recovery will turn up. Use this to factory reset.
4. Wait for it to continue like normal after factory reset.
5. Setup INCLUDING with WiFi. WiFi REQUIRED. No need to add your account
6. Make sure OEM Unlock is still checked.
*************************************************************************************************
ROOT INSTRUCTIONS: https://www.thecustomdroid.com/samsung-galaxy-s10-root-guide/
*************************************************************************************************
1. Use adb push to shunt over Magisk Manager (download latest one), and the "AP" file
2. Install Magisk Manager
3. Open, select install, make sure "Recovery" is ticked, next, select "Select and Patch a File"
4. Select the AP file, then click "Let's Go"
5. Use adb pull, as the MTP file transfer ****s up the large patched files Thanks Microsoft!
6. (adb reboot bootloader) Restart phone in Download mode
7. Open Odin, & flash the patched Magisk AP file in AP, BL in BL, CP in CP, CSC (NOT the HOME one) in CSC.
8. Let device reboot while holding POWER, BIXBY, and VOL UP, and release all 3 buttons on bootloader warning screen.
a. NOTE: If you end up with a bootloop, hold POWER, BIXBY, VOL UP until you enter the built-in recovery menu, and do a factory reset.​
9. Set device up like normal, remember to enable the WiFi
a. Check device internal storage, should be XXX out of 128GB (Or whatever you have)​
10. Search installed apps for the Magisk one, it won't have a proper icon to begin with
11. Open it, and continue the setup as it instructs. It’ll reboot the phone.
12. Device is now rooted.
********************************************************************************************
TWRP INSTRUCTIONS: https://www.thecustomdroid.com/samsung-galaxy-s10-twrp-magisk-root-guide/
********************************************************************************************
Phone must be rooted for this to work!
1. Copy the un-magisked file "twrp-3.5.2_9-3-beyond2lte.img" onto phone
2. Open Magisk, select install, make sure "Recovery" is ticked, next, select "Select and Patch a File"
3. Patch the "twrp-3.5.2_9-3-beyond2lte.img" file
4. Copy that patched file onto your PC, and rename it magisk_patched.img
5. Open powershell in same folder, and type
a. mv magisk_patched.img recovery.img​b. tar cf twrp-beyond2lte.img.tar recovery.img​
6. Enter into Bootloader mode
7. Load up Odin, untick auto-reboot, and put the magisk-patched TWRP.tar file in AP
8. Press PWR and VOL-DOWN to exit Download Mode, as soon as screen goes black, switch to PWR, BXBE, VOL-UP, release PWR & BXBE when you see bootloader warning, keep VOL UP
9. In TWRP, swipe to allow modifications
10. Flash multidisabler-samsung.zip
11. Go to wipe - format data - yes, after go back to TWRP home screen
12. Click Reboot > Recovery (NOT SYSTEM), you now have a TWRP enabled device.
13. Reinstall Magisk, and check root status, it should ask you to do the whole re-download/5 second reboot thing because you did the wipe > yes thing in TWRP.
UPDATE: After restarting my phone I lost root (Magisk was still installed, but it didn't have an "installed" version listed). To get past this I...
*************************************************************************************************************************
Magisk reinstallation via TWRP:
[ROM][Signature Spoofing]LineageOS 18.1 for S10E/S10/S10+ Exynos
oHello my friends, please someone could make a video to activate root? I can't even do it with the key combinations... Please help me I can't get into the bank apps :(
forum.xda-developers.com
*************************************************************************************************************************
1. Copy the "beyond2lte-boot-magisk.img" onto phone (see URL above)
2. Run Magisk, patch the "beyond2lte-boot-magisk.img" file, then copy it over onto your MicroSD (I just find it easier)
3. Boot into TWRP > Install > Install Image button (Bottom Right)
a. If TWRP has vanished, follow steps above to get it back​
4. Flash the patched file to "Boot"
5. Go to TWRP Home screen > Reboot into Recovery (not into System)
6. Check Magisk Manager should have Root again (Don't update Magisk via app though, or you’ll bollocks the whole thing up, and have to start all over from the start.)