Database Users

Q: A955 can not flash,root or factory reset

Hello !
Sorry for my English ! I will try to explain.
I have
Motorola Droid 2 A955 Verizon
Android version: 4.5.621.A955.Verizon.en.US
Baseband version: BP_C_01.09.15P
Kernel version: 2.6.32.9-gb9e12dd [email protected] #1
Build Number:4.5._57_DR4-51
ERI version: Unknown
PRL version: Unknown
The problem is I can not make factory reset or hard reset I can't flash stock new firmware after progress 100% it's show error failed !
I can't root the phone I try all method in xda but after restart everything is as before.
When i try to uninstall some app or make new setting after restart everything is as before! I looked for post like this but I can't found .
Can you give me advice what to do ?
Sorry for my bad English !

root with http://forum.xda-developers.com/showthread.php?t=1773391
New method for rooting Droid 2 on stock 2.3.4 (621)
Sent from my DROID X2 using xda premium

I already tried this method
everything flash ok until
.... OK
>> uploading CG66: 100.0%
-- OK
>> verifying CG31
Checksum error (Expected 0x8ccd, Got 0x8ecd)
!! failed
>> verifying CG33
-- OK
>> verifying CG34
-- OK
>> verifying CG35
-- OK
>> verifying CG39
-- OK
Checksum error (Expected 0xc991,Got 0x8ecd)
!! failed
>> verifying CG42
-- OK
>> verifying CG47
-- OK
>> verifying CG61
-- OK
>> verifying CG64
-- OK
>> verifying CG65
-- OK
>> verifying CG66
-- OK
and after reboot phone is same as before !!!! old apps and settings
if I choose Root from linux menu after reboot everything is same as before !

apps are not removed from rooting or flashing SBF
only wiping data does that
read http://droid.koumakan.jp/wiki/Welcome
recovery section
and try
multi device slitaz boot iso, like ezSBF
Droid2_D2G_DX_DX2-RootCD-2012.iso
has options for D2, D2G, DX, and DX2
burn to cd with imgburn, or flash drive use Download UNetBootin for Windows

sd_shadow said:
apps are not removed from rooting or flashing SBF
only wiping data does that
read http://droid.koumakan.jp/wiki/Welcome
recovery section
and try
multi device slitaz boot iso, like ezSBF
Droid2_D2G_DX_DX2-RootCD-2012.iso
has options for D2, D2G, DX, and DX2
burn to cd with imgburn, or flash drive use Download UNetBootin for Windows
Click to expand...
Click to collapse
no changes ! still same firmware, settings and apps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I make full wipe in android recovery /data and cache (yellow triangle)
and after reboot no changes why ?
maybe flash memory is corrupted

1 firmware will not change with rooting, or SBF
2 what apps are not being removed, you can not remove stock apps until, after phone is rooted
3 looks like rooting failed
select d2
turn phone on, connect to pc with usb cable
check usb debugging settings/apps/development
select charge only or pc mode usb mode
press continue
adb will push
Code:
data/local.prop /data/preinstall_md5/magic.md5
reboot phone to bootloader
flash repacked sbf (less than 50mb)
reboot twice, very important (reboot just replaces the local.prop, but the old local.prop is still in memory, till second reboot)
adb pushes su,superuser, and busybox
reboot to recovery, wipe cache
reboot normally
rooted

I want to reflash stock frimware what's that mean Error veryfing Code Group 31 checksum: ......

could be bad usb cable

Sounds like maybe a bad or corrupted sbf download
Sent from my DROID2

When you get the "Flash Failed" message on RSD just hit Start again. It will give you a message about not being complete or some jazz. Hit start one more time and the phone should reset normally. Once it is fully rebooted go back into the cmd window and press any key as it says and follow the last instructions to finish rooting.

Thanks for your post.
I have been trying to root my droid 2 for almost a month now and I finally got it with this app.Thanks a lot.I's arooted now y'all.I say I's arooted.

Huawei P8 Lite won't boot

I recently dropped my phone in a puddle, which rendered the touchscreen useless... The phone would unlock but nothing would happen when I touched the screen. After waiting a couple of days, the touchscreen actually worked, but the phone was slow. I restarted it to see if it got better, but now it won't boot, it says:
"Rescue Mode
Attention!
Please update system again
Error!
Func NO : 8 (hifi image)
Error NO : 1 (security verify failed!)
Does anyone know if there is a solution to this? I haven't found anything useful online. Thanks in advance.

Download your Firmware from huaweifirmware(.)com. Then you need to extract the file with the HWUpdateExtractor and flash the boot.img and System.img using fastboot (Google it)
Hope that works! Oh and sorry for my crappy english.

I have the exact same problem:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From http://huaweifirmware.com/huawei-p8-lite, I downloaded P8LiteC432B604.zip and extracted the four IMG files from UPDATE.APP:
Code:
fastboot devices
fastboot flash recovery RECOVERY.IMG
fastboot flash cust CUST.IMG
fastboot flash boot BOOT.IMG
fastboot flash system SYSTEM.IMG
fastboot reboot
But still stuck.
What does "Error NO: 1 (security verify failed)" mean?
Thank you.

Can you boot your phone into recovery mode?
When my phone was blicked,the phone wasn't boot in android(booted into rescue mode),but recovery mode was worked...(hold vol.up+power)
sorry for my bad english.
Edit:I don't know about error no.1,but I think it is vm-verify…
and please send fastboot command's result.
Edit2h,I forget hifi image error!

ibrickShiet said:
I recently dropped my phone in a puddle, which rendered the touchscreen useless... The phone would unlock but nothing would happen when I touched the screen. After waiting a couple of days, the touchscreen actually worked, but the phone was slow. I restarted it to see if it got better, but now it won't boot, it says:
"Rescue Mode
Attention!
Please update system again
Error!
Func NO : 8 (hifi image)
Error NO : 1 (security verify failed!)
Does anyone know if there is a solution to this? I haven't found anything useful online. Thanks in advance.
Click to expand...
Click to collapse
You need to download lastest firmware and Huawei Update Extractor!
1. Open Extractor, and get HiFi.img there is that img t I had the same problem!
Download ADB AND FASTBOOT files, because you will need them. (Paste in this map HIFI.IMG)
2. Shift and Right click on mouse, there will be open cdm here, open!
3. Fastboot flash hifi hifi.img
4.fastboot reboot.
Done! Phone fixed! If I helped you slap that thanks button??

[Q] Bricked - after TWRP restore - unsuccessful

It is the same problem as written here : https://forum.xda-developers.com/p8...awei-p8-lite-2017-pra-lx1-brick-trwp-t3660664
I've followed every steps, but my phone is still bricked.
My build version is (I guess?) PRA-LX1C432B100
I tried several firmware builds to restore on, but when I try to install it (by pushing POWER / VOL - / VOL +) :
- PRA-LX1C530B130 : firmware versions mismatch
- PRA-LX1C33xxxx : can't install, I don't remember error message but surely the same as the above one.
- PRA-LX1C432B128 : "Installing update" at 5% then "Software install failed" with sub message "Get help from http://www.emui.com/emotiondownload?mod=restore"
I followed the rooting method from a french website that was for build PRA-LX1C432B100 but I can't find this firmware anywhere.
Can someone have the link ? Tried with Firmware Finder.. Now i'm downloading from needrom but still don't know if it's for the good build version...
When the phone boots, it displays :
- HW Logo
- Warning about the BL
- HW logo
- blank
- HW logo
- Warning about the BL
- erestore
When trying to download and reboot from erestore, it says "Getting package info failed" and thus, can't download.
----
TWRP
I also tried to flash PRA-LX1C530B130 update.zip, but I get the exact same thing as here : https://forum.xda-developers.com/attachment.php?attachmentid=4008385&d=1484772172
---
Any way to unbrick this d*mn thing ?
I need help, thank you.

Your phone is locked. Try the unlocking by huawei unlockcode.

Thank you for this fast answer,
though, where do I enter the code(s) ?
I went to https://tools.texby.com/unlock-codes/huawei/ to obtain my code, is that correct ?
I entered fastboot, no devices found with "huawei code writer"
Same with recovery mode and eRecovery :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do this command in fastbootmode by adb:
fastboot oem unlock 1234567...... (your unlock code from Huawei.

Oh okay, but i'm already unlocked.
...
FAILED (remote: already fastboot unlocked)
finished. total time: 0.004s
Click to expand...
Click to collapse

Ok., then flash the stock recovery again and make a factoryreset.

I can't find the stock recovery on internet nor on Firmware Finder. Do you know where I can find PRA-LX1C432B100 ?
I flashed many times on differents build versions those files :
recovery.img
boot.img
system.img
cust.img
Do I need to only flash the stock recovery (if I can find it..) to make everything else work ?
if I have no stock system nor stock boot, will it boot ?
And by "stock" I mean "stock for my device" because I've tried many stock images that end up in erecovery, even after a factory reset in the stock recovery.
-- EDIT --
With the mobile app, it says that the PRA-LX1C432B100 has been removed from the server.

Flash TWRP and see if it starts there.

ChinHon said:
Flash TWRP and see if it starts there.
Click to expand...
Click to collapse
Flashed TWRP.
Can still not boot on system (it's going on eRecovery) but sure I can boot in TWRP.

You have removed the usb cable during the reboot?

I have bricked my phone, can't install rom from erecovery becouse doesn't retrive update from server. What can I do?
I'm disperate can you help me?

ChinHon said:
You have removed the usb cable during the reboot?
Click to expand...
Click to collapse
Yes I did

Sw0ut said:
Yes I did
Click to expand...
Click to collapse
Ah, but I did it again and it worked.
Go TWRP and I can boot. I can indeed see my build version which is PRA-LX1C432B164.
I can boot, so i'm gonna follow the tutorial again.
Thanks.

Sw0ut said:
Ah, but I did it again and it worked.
Go TWRP and I can boot. I can indeed see my build version which is PRA-LX1C432B164.
I can boot, so i'm gonna follow the tutorial again.
Thanks.
Click to expand...
Click to collapse
:good:

How to unbrick SATV Pro 2015? - Need Help

Hi all,
On Recently 7.2.1 updates, my device is failed to optimize (left it for the whole day alone)
So, i enter the recovery mode, performing the factory data reset. and when it done, reboot the device.
in this normal state, the OS is failed to enter, keep stuck at Nvidia logo forever.
Then, i enter the boot recovery kernel to
1) Wipe cache / partition
2) Wipe data / factory reset
and put the device into reboot when it done, but this appeared to be same (stuck at Nvidia logo and turn blank after a few hours)
This also put me into trouble because i cant apply the update via USB storage and ADB.
the error message is -- couldn't mount / usbdrive : Invalid argument (USB storage)
ADB device fastboot boot can't detect the device via PC
I provide the snapshot for your reference. Appreciate for your help and provide me a best solutions. Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Garageflower said:
Hi all,
On Recently 7.2.1 updates, my device is failed to optimize (left it for the whole day alone)
So, i enter the recovery mode, performing the factory data reset. and when it done, reboot the device.
in this normal state, the OS is failed to enter, keep stuck at Nvidia logo forever.
Then, i enter the boot recovery kernel to
1) Wipe cache / partition
2) Wipe data / factory reset
and put the device into reboot when it done, but this appeared to be same (stuck at Nvidia logo and turn blank after a few hours)
This also put me into trouble because i cant apply the update via USB storage and ADB.
the error message is -- couldn't mount / usbdrive : Invalid argument (USB storage)
ADB device fastboot boot can't detect the device via PC
I provide the snapshot for your reference. Appreciate for your help and provide me a best solutions. Thank you
Click to expand...
Click to collapse
Fastboot and flash 7.1 developers image per Nvidia's instructions. I had the same problem and that worked for me of course this is considering your bootloader is unlocked

stuck in TWRP boot loop

Hi,
I am in a pickle of my own doing, of course. I followed this video (https://www.youtube.com/watch?v=BT6P5m1XGpw) and now I can only get either the screen that has two Asian languages and English on reboot, or I can get into TWRP.
How do I get it to boot to an OS, any version at this point?
Here are some details:
I have an unlocked boot loader A6013
I was running 9.0.12 and wanted 9.0.13
Using Android File Transfer, I moved Magisk-v18.0.zip, twrp-installer-fajita-3.2.3-2.zip, and OnePlus6TOxygen_34_OTA_020_all_1904032212_38e22c8b9abd42e3.zip into the download folder.
I then rebooted into TWRP recovery, installed twrp-installer-fajita-3.2.3-2.zip
Rebooted to recovery again, and installed OnePlus6TOxygen_34_OTA_020_all_1904032212_38e22c8b9abd42e3.zip
Then I installed twrp-installer-fajita-3.2.3-2.zip again.
Then I rebooted to recovery and tried to install Magisk-v18.0.zip, but found that my directory structure is all mangled with folders named like this "6MTjdFQ0IJuqeJ0kD4vzTB" etc...
I can't find the Download folder anywhere.
Booting normally only gives me the three option of two Asian language options or English. Choosing English gets me the menu to Wipe Data and Cache, Advanced or Exit. Under Advanced I can Reboot to Fastboot, Reboot to recovery or Ver 2.0. Reboot to Recovery send me back to the two Asian languages, etc.
I can boot to TWRP by pressing Vol+ and Power, at which point I have all those options (Install, Wipe, Backup, Restore, Mount, Settings, Advanced, Reboot). I can also see all the "mangled" folders on Android File Transfer, and can sideload things, but dragging and dropping any file into the AFT window is rejected.
Any help would be super appreciated. Please let me know if I didn't give enough information.
Gratefully yours,
Chris El Stupido.

https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
This has helped me loads of times ?

i had this problem with my oneplus 6t and i solved it with this solution .. try it maybe it's will work for you insha allah :
1- download tool all for one from this link :
https://forum.xda-developers.com/oneplus-7-pro/development/tool-tool-one-driversunlocktwrpfactory-t3930862
2- open it and put your phone in fastboot or what ever it stuck in it and connect your mobile with your PC .
3- press flash factory image :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4- then press download stock rom
5- it's will take you to fasttboot image page
6- go to oneplus 6t and download the rom
7- then wait its will returns you to fastboot rom and its will work perfectly
then you can download the stock rom again from your stock twrp

Images do not match with the phone! error
jaythenut said:
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
This has helped me loads of times
Click to expand...
Click to collapse
Thanks, I downloaded the 9.0.13, and 9.0.12 versions, I installed the Qualcomm drivers, and see the phone under ports as "Qualcomm" and keep getting the error "Images do not match with the phone!"
All I can do is fastboot mode.
I'm using the stock red OnePlus cable, Windows 10, signature disabled, arghh.
Any tips?

crf1964 said:
Thanks, I downloaded the 9.0.13, and 9.0.12 versions, I installed the Qualcomm drivers, and see the phone under ports as "Qualcomm" and keep getting the error "Images do not match with the phone!"
All I can do is fastboot mode.
I'm using the stock red OnePlus cable, Windows 10, signature disabled, arghh.
Any tips?
Click to expand...
Click to collapse
Ok try this one https://forum.xda-developers.com/on...ol-tool-one-driversunlocktwrpfactory-t3860279

trying Tool all in one...no luck
jaythenut said:
Ok try this one https://forum.xda-developers.com/on...ol-tool-one-driversunlocktwrpfactory-t3860279
Click to expand...
Click to collapse
Thanks, I downloaded that Tool All in One app as well as Fastboot and ADB for Windows.
By way of review, by phone only boots to the Fastboot screen showing:
Product Name: sdm845
Variant: SDM UFS
Bootloader Version: [blank]
Baseband Version: [blank]
Serial Numbr: 7faf37cb
Secure Boot: Yes
Device Status: unlocked
In AIO:
- it is not autodetected under Model Auto-Detect
- Under Bootloader, the Bootlaoder Status shows "your bootloader is Unlocked"
- Under Rebooter, I can reboot the phone
- Under REcovery Flasher and Root, when I choose TWP 3.2.3 OP6T, and press Flash I get:
- Booting TWRP...
- Sending "boot.img" (30288kb) . OKAY
- Booting . Failed (remote: "failed to load/authenticate boot image: Load Error')
- fastboot error: Command Failed
- Waiting the TWRP boots...
- * daemon not running; starting now at tcp:5037
- * daemon started successfully
nothing happens after that in the terminal window, or on the phone.
What am I missing ? sigh, many thanks for your help.

crf1964 said:
Thanks, I downloaded that Tool All in One app as well as Fastboot and ADB for Windows.
By way of review, by phone only boots to the Fastboot screen showing:
Product Name: sdm845
Variant: SDM UFS
Bootloader Version: [blank]
Baseband Version: [blank]
Serial Numbr: 7faf37cb
Secure Boot: Yes
Device Status: unlocked
In AIO:
- it is not autodetected under Model Auto-Detect
- Under Bootloader, the Bootlaoder Status shows "your bootloader is Unlocked"
- Under Rebooter, I can reboot the phone
- Under REcovery Flasher and Root, when I choose TWP 3.2.3 OP6T, and press Flash I get:
- Booting TWRP...
- Sending "boot.img" (30288kb) . OKAY
- Booting . Failed (remote: "failed to load/authenticate boot image: Load Error')
- fastboot error: Command Failed
- Waiting the TWRP boots...
- * daemon not running; starting now at tcp:5037
- * daemon started successfully
nothing happens after that in the terminal window, or on the phone.
What am I missing ? sigh, many thanks for your help.
Click to expand...
Click to collapse
Not to sure try and install OS 13 sounds like your phone is completely wiped so install OS get it to boot setup again then try twrp

All Fixed!
jaythenut said:
Not to sure try and install OS 13 sounds like your phone is completely wiped so install OS get it to boot setup again then try twrp
Click to expand...
Click to collapse
I ran this process and came back finally!
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
After 6 hours upgrading from 9.0.12 to 9.0.13 I have learned my lesson. Not sure it was worth a 0.0.01 update. Yikes!
Thanks to all! Your ideas and support were essentil to my sanity and the process.

is there a tool for oneplus 6? or t6.