bricked, no recovery to flash kernel - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

I have the s4 sgh l337 with the mdl bootloader from way back. was running Goldeneye rom and it started giving me issues. so i thought id flash the Albe s6 port rom and thought i needed safestrap for it. so i installed safestrap by installing the apk and busybox and the nc1 flasher and rebooted.
now i get the SYSTEM SOFTWARE NOT AUTHORIZED FOR AT&T and i have no recover either! its the stock recovery and im not sure how i can flash another kernel or recovery back to just reset the whole phone.
any help would be much appreciated

param.006 said:
I have the s4 sgh l337 with the mdl bootloader from way back. was running Goldeneye rom and it started giving me issues. so i thought id flash the Albe s6 port rom and thought i needed safestrap for it. so i installed safestrap by installing the apk and busybox and the nc1 flasher and rebooted.
now i get the SYSTEM SOFTWARE NOT AUTHORIZED FOR AT&T and i have no recover either! its the stock recovery and im not sure how i can flash another kernel or recovery back to just reset the whole phone.
any help would be much appreciated
Click to expand...
Click to collapse
If you'd sure you are still on MDL bootloader then you need to odin the stock MDL firmware.
Bear in mind that if your bootloader is no longer MDL then flashing the MDL firmware could trip the knox counter.
Safestrap is for the i337 with newer bootloader. It works on NC1 bootloader as such you need NC1 flasher.
Golden eye has an option to choose between old bootloaders (MDL/MDB) and Safestrap users. Albe S6 port does not appear to have that option.

sway8966 said:
If you'd sure you are still on MDL bootloader then you need to odin the stock MDL firmware.
Bear in mind that if your bootloader is no longer MDL then flashing the MDL firmware could trip the knox counter.
Safestrap is for the i337 with newer bootloader. It works on NC1 bootloader as such you need NC1 flasher.
Golden eye has an option to choose between old bootloaders (MDL/MDB) and Safestrap users. Albe S6 port does not appear to have that option.
Click to expand...
Click to collapse
never mind. i had another issue after Odin back to stock but i just had to wipe data/cache through the stock recovery. now good to go!
thanks for the help bro!

param.006 said:
never mind. i had another issue after Odin back to stock but i just had to wipe data/cache through the stock recovery. now good to go!
thanks for the help bro!
Click to expand...
Click to collapse
Glad to hear it.
It did happen to me when I odin the MDB firmware on my MDL phone three years back. The MDL firmware I downloaded had checksum error so I had to use the MDB firmware instead.

Related

[Q] Running 4.3 ROMs with Safestrap 3.72?

Hi all,
I just bought a new i337 and it came with the NB1 bootloader, NB1 stock, and I followed all the steps to downgrade, etc and have SafeStrap 4.72 running it with a rooted NB1 stock firmware. However, there are some things I like about 4.3, and I would like to run SHOSTOCK (JellyBean version), but I know that I flashed a NB1 Kernel through ODIN as part of running the rooted NB1 stock. Do I have to start over and downgrade it back to MK2? Or is it as simple as just installing the SHOSTOCK for Safestrap in SafeStrap 4.72 even though in the SHOSTOCK thread they don't mention anything about 4.72, just 4.71. I guess I'm just concerned about the kernels not matching with the locked bootloader and all.
Thanks in advance for any help!
zebra72 said:
Hi all,
I just bought a new i337 and it came with the NB1 bootloader, NB1 stock, and I followed all the steps to downgrade, etc and have SafeStrap 4.72 running it with a rooted NB1 stock firmware. However, there are some things I like about 4.3, and I would like to run SHOSTOCK (JellyBean version), but I know that I flashed a NB1 Kernel through ODIN as part of running the rooted NB1 stock. Do I have to start over and downgrade it back to MK2? Or is it as simple as just installing the SHOSTOCK for Safestrap in SafeStrap 4.72 even though in the SHOSTOCK thread they don't mention anything about 4.72, just 4.71. I guess I'm just concerned about the kernels not matching with the locked bootloader and all.
Thanks in advance for any help!
Click to expand...
Click to collapse
Safestrap v3.72 will mount on both 4.4 and 4.3 kernels. No need to switch back to v3.71.
muniz_ri said:
Safestrap v3.72 will mount on both 4.4 and 4.3 kernels. No need to switch back to v3.71.
Click to expand...
Click to collapse
Thanks for the quick response and answer.
Just a quick clarification, I cannot use Safestrap 3.71 anyway due to my phone having the NB1 bootloader, right? I thought v 3.71 was only for those on MK2 or below.
Thanks again for all your awesome work on finding workarounds for rooting NB1 phones and above!
zebra72 said:
Thanks for the quick response and answer.
Just a quick clarification, I cannot use Safestrap 3.71 anyway due to my phone having the NB1 bootloader, right? I thought v 3.71 was only for those on MK2 or below.
Thanks again for all your awesome work on finding workarounds for rooting NB1 phones and above!
Click to expand...
Click to collapse
No the SS version has more to do with your kernel not the BL. You can theoretically flash a 4.3 ROM using SS 3.71 on your 4.4 BL. There are additional requirements like modules, etc that I won't get into.
Well, I was trying to installing SHOStock 3.0- safestrap version today, and I kept getting the "cannot mount /system" in SafeStrap while installing. After rebooting a couple of times, I think I stupidly decided to do an advanced wipe of /system (among others). Do I have to go all the way back to stock NB1 (Original NB1), and then start the whole process to MK2->Root -> Safestrap all over again?
Thanks for any help!
zebra72 said:
Well, I was trying to installing SHOStock 3.0- safestrap version today, and I kept getting the "cannot mount /system" in SafeStrap while installing. After rebooting a couple of times, I think I stupidly decided to do an advanced wipe of /system (among others). Do I have to go all the way back to stock NB1 (Original NB1), and then start the whole process to MK2->Root -> Safestrap all over again?
Thanks for any help!
Click to expand...
Click to collapse
Yup. Boot into download mode and start all over.
zebra72 said:
Well, I was trying to installing SHOStock 3.0- safestrap version today, and I kept getting the "cannot mount /system" in SafeStrap while installing. After rebooting a couple of times, I think I stupidly decided to do an advanced wipe of /system (among others). Do I have to go all the way back to stock NB1 (Original NB1), and then start the whole process to MK2->Root -> Safestrap all over again?
Thanks for any help!
Click to expand...
Click to collapse
Use the downgrade to MK2 file from this thread then root and install safestrap: http://forum.xda-developers.com/showthread.php?t=2692825
muniz_ri said:
Use the downgrade to MK2 file from this thread then root and install safestrap: http://forum.xda-developers.com/showthread.php?t=2692825
Click to expand...
Click to collapse
Thanks for all the quick replies. Just to recap, ODIN back to Stock NB1 (no need to uninstall the remnants of SafeStrap I have now?), Downgrade to MK2, Root, Safestrap.
Also, I'm not sure what I did wrong when I went from rooted Stock NB1 to try to flash SHOStock 3.0 (which was 4.3). I honestly wasn't paying attention to the messages, so maybe I had a unable to mount /system error then, but then I went to reboot it, just was blank. That's when I decided to be stupid and go to recovery to advanced wipe including /system. I guess now if I want to run SHOStock 3.0, or whatever ROM, I can just install it once I have Safestrap rather than installing the Rooted ROM and kernel, right?
Thanks again!
zebra72 said:
Thanks for all the quick replies. Just to recap, ODIN back to Stock NB1 (no need to uninstall the remnants of SafeStrap I have now?), Downgrade to MK2, Root, Safestrap.
Also, I'm not sure what I did wrong when I went from rooted Stock NB1 to try to flash SHOStock 3.0 (which was 4.3). I honestly wasn't paying attention to the messages, so maybe I had a unable to mount /system error then, but then I went to reboot it, just was blank. That's when I decided to be stupid and go to recovery to advanced wipe including /system. I guess now if I want to run SHOStock 3.0, or whatever ROM, I can just install it once I have Safestrap rather than installing the Rooted ROM and kernel, right?
Thanks again!
Click to expand...
Click to collapse
No need to odin back to stock NB1, the downgrade file will get you back to a semi-functioning(no-wifi) MK2 at which point you can root and install safestrap. From there go to the SHoStock thread for instructions on how to properly install that particular ROM.
muniz_ri said:
No need to odin back to stock NB1, the downgrade file will get you back to a semi-functioning(no-wifi) MK2 at which point you can root and install safestrap. From there go to the SHoStock thread for instructions on how to properly install that particular ROM.
Click to expand...
Click to collapse
Thanks again for the quick reply.
Just to clarify, I guess I'm really confused about what kernel I would have if I flash the downgrade file? Would it overwrite the NB1 kernel I flashed after I flashed the rooted stock NB1 in Safestrap? I noticed that in going to rooted stock NB1 (or NC1), you have to ODIN flash the kernel.
Thanks again.
zebra72 said:
Thanks again for the quick reply.
Just to clarify, I guess I'm really confused about what kernel I would have if I flash the downgrade file? Would it overwrite the NB1 kernel I flashed after I flashed the rooted stock NB1 in Safestrap? I noticed that in going to rooted stock NB1 (or NC1), you have to ODIN flash the kernel.
Thanks again.
Click to expand...
Click to collapse
Yes the downgrade will revert you back to mk2 kernel in order for you to be able to root.

S4 ucuamdl

Im trying to go back to stock.. im using odin 3.09 and ive flashed \I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
I had twrp installed and Slimkat which i used for over 6 months.. I forgot that i updated to the latest radio .. NI1 I believe.. would ths make the phone hang and sit at the att screen?
If this is why im having issues.. what can i do?
Flash NB1 first and then flash back to MDL if you want. Tell me if it worked
moiramd said:
Flash NB1 first and then flash back to MDL if you want. Tell me if it worked
Click to expand...
Click to collapse
On a SGH-1337? Will NB1 lock my bootloader? I dont see NB1 on sammobile.
http://forum.xda-developers.com/showthread.php?t=2616221 use this thread yes it will lock your bootloader. In the thread is all things you need
cmdba said:
On a SGH-1337? Will NB1 lock my bootloader? I dont see NB1 on sammobile.
Click to expand...
Click to collapse
Do NOT flash NB1. KEEP MDL. NB1 WILL LOCK YOU FROM SLIMKAT AND ANYTHING.
Make sure you wiped data in recovery before you tried booting. The modem would mess it up but it should have been flashed over with the full tar. Just try wiping in the stock recovery first.
Sent from my SGH-I337
DeadlySin9 said:
Do NOT flash NB1. KEEP MDL. NB1 WILL LOCK YOU FROM SLIMKAT AND ANYTHING.
Make sure you wiped data in recovery before you tried booting. The modem would mess it up but it should have been flashed over with the full tar. Just try wiping in the stock recovery first.
Sent from my SGH-I337
Click to expand...
Click to collapse
Yeah im good to go now.. back on MDL. Thanks

Acquiring lollipop from 4.4.2 nc4

Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
scottayy said:
Hello
First let it be known that i have searched my butt off and tried many different things. The best i could get was a rooted phone and a non working safestrap install.
Can someone please give clear instructions here in this thread to either a) install safestrap on 4.4.2 nc4 or b) let me know if it's possible to install verizons stock lollipop firmware using odin (no recovery required).
I would love to get a working custom recovery to try different roms. Failing that, id love to know if it's possible to just flash stock lollipop firmware on this device.
I'm sorry to make such a request, as my first post.. But have been rooting and roming and xdaing since the Samsung vibrant. I'm just tired of trying to make this locked bootloader work. I must've tried a hundred different things.
As of right now ive odind back to 4.4.2 stock with nc4 kernel and said root, busybox, and supersu.
I'm familiar with odin, flashing, all the terminology, and can find the files on my own.
Click to expand...
Click to collapse
Yes..you can flash stock firmware for 5.0 via Odin. You will lose root and as of this time....can not root 5.0
once on 5.0, you can only odin back to 4.4.4 which is also unrootable.
simplyeorange said:
Yeah you can go back to 4.4.4 I've read post of people on this forum saying they were able to get back to 4.4.4 you need to download the stock tar. Which you can find on sammobile than boot into download mode and then open Odin flash the stock tar. After its done flashing Then boot into stock recovery and do factory data reset. Wait about 5-10mins and should boot you into 4.4.4
Click to expand...
Click to collapse
Sent from my Note 3 via Tapatalk
Thanks for that. I'm sorry about the aggressive tone of my original post. I was just quite frankly mad at how much verizon locked the note 3 down. I own it, you know? Lol.
I wanted custom recovery mostly for the nandroid backups. If i flash the nc2 kernel on 4.4.2 with nc4 kernel... Supposedly this is supposed to make safestrap work with one rom slot (stock). I tried this but it soft bricked. Is there a custom nc2 kernel I'm supposed to flash?
Also if i odin the stock 5.0 files will this keep all user apps and data? I suppose i could use titanium backup for that but I'm not sure if it will be compatible from 4.4.2 to 5.0?
I guess i have to debate whether i want nandroid backup abilities or lollipop.

Just Rooted S4, Now Looking at Cyanogenmod

[deleted]
twinki3face said:
Last night I was finally able to root my phone after numerous problems.
Click to expand...
Click to collapse
I'm in the same position. I just picked up a new i337 and I'm having problems trying to downgrade with Oden. I used the rootable NB1 in the AP slot of the newest Odin and it chewed on the phone for awhile before telling me the process failed. The attempt did not seem to harm the phone tho.
What problems did you encounter? Any tips or pointers? Thanks.
If you have a locked bootloader, you can only flash TW-based ROMs via safestrap.
You can always unbrick by flashing through odin. You can ONLY use Safestrap. You can't use Cyanogenmod.
Not sure why you try so hard to root. All you need is towelroot.
Andrews1 said:
I'm in the same position. I just picked up a new i337 and I'm having problems trying to downgrade with Oden. I used the rootable NB1 in the AP slot of the newest Odin and it chewed on the phone for awhile before telling me the process failed. The attempt did not seem to harm the phone tho.
What problems did you encounter? Any tips or pointers? Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2448925
This is a link to the safestrap thread, so you can start putting custom touchwiz Roms on your phone. Sorry, but since you have the NB1 locked bootloader, you can not use cyanogen mod. There are some good TWroms though, I recommend OmegaRom and or the GPE ROM by Joe-tech. Good luck!

Easy Question: Does flashing a stock rom in Odin remove everything? (safestrap, root)

Repeat question: does flashing stock in Odin remove safestrap, root, xposed, magisk, etc?
It should but there is no stock rom for the i337 beyond 4.2.2 and 4.2.2 cannot be flashed to a phone with a 4.3 or newer bootloader.
audit13 said:
It should but there is no stock rom for the i337 beyond 4.2.2 and 4.2.2 cannot be flashed to a phone with a 4.3 or newer bootloader.
Click to expand...
Click to collapse
Huh. Yeah I just tried flashing the NH4 kernel and it did nothing.... so what are my options to get me unrooted? I tried using superSU and it doesn't seem to work. I was trying to get the new pokemon go update to work(not compatible with root), so I tried the magisk workaround, hit a roadblock there. So I tried to uninstall magisk with their software and unroot, didn't work. So now I'd like to just wipe and start over but if the traditional flash a stock rom won't work I'm at a loss
I would start here: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
audit13 said:
It should but there is no stock rom for the i337 beyond 4.2.2 and 4.2.2 cannot be flashed to a phone with a 4.3 or newer bootloader.
Click to expand...
Click to collapse
Nevermind, the SuperSU unroot decided to work out afterall. Thanks again!

Categories

Resources