Related
Hi,
I had done it, it had worked in my device, if anyone got problem I can try to correct!
Enjoy!
Configuraçoes da Claro??
Ola...voce nao tem um cab para as configuracoes da Claro??
Obrigado
giacomitti said:
Hi,
I had done it, it had worked in my device, if anyone got problem I can try to correct!
Enjoy!
Click to expand...
Click to collapse
i realy apreciate the configs for claro too
Claro
Hello,
if you had the settings I can do it for you!
Please send me!
Sorry for delay
Arnaldo.
Grab it on http://www.giacomitti.eng.br/
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Y511 Firmware
Anfesango said:
Please I need it urgently, my signal damage and do not have it either for Odin, Either would serve me, or firmware or odin
Click to expand...
Click to collapse
I also need his Y511 firmware, right now the only firmware I can find is the China Mobile (this doent work in Colombia because China Mobile doesn´t use WCDMA) or the China Unicom firmware (this works in Clombia), but both are Chinese so they dont have any google application, not even the play store and I tried hard and couldnot install google apps.
You find those Y511 firmware (I can not post links, sorry):
China Mobile does not have WCDMA, only sd-CDMA
En español: Yo he buscado mucho el firmware para el Y511, el único que encuentro es el Chino, que se puede poner en ingles pero no trae nada de Google y me ha sido imposible instalar los productos de Google (Gapps), yo no lo usaría. De los 2 links, el de Cina Unicom es el único que funciona en Colombia. Si lo encuentra avíseme!
huawei y511
Why is there no specific page for this device huawei y511?
y511 firmware flash
noamanahmed said:
Why is there no specific page for this device huawei y511?
Click to expand...
Click to collapse
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
The Russian upgrade works
mattm3t said:
you try the russian y511-u30... it's very functional... though it might be for dual-sim y511, it functions just as good, if not much better.
i am not able to put the link because i am prevented by the admin to post it... just google "huawei y511-u30 flash firmware"...
Click to expand...
Click to collapse
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
bikebogota said:
Hey you are right, the Russian upgrade works! I went to huaweidevice russia, searched Y511, downloaded the firmware, put it in dload folder in the SD card and used the SD card upgrade that is in the settings of the phone, thats all. Phone upgraded and no more chinese apps!
Camilo
Click to expand...
Click to collapse
congratulations, that's so nice to hear. i want to add some info that you can remove the russian language too if you will root your y511.. only english will remain.
Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.
Same problem
PetrykPL said:
Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.
Click to expand...
Click to collapse
Hello, i make same mistake and symptoms are same. I’m glad that I’m not only one in this situation and hope that we found solution for that problem.
Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP
Cool, now we need a method to update our clocks. Thanks for sharing firmware.
s2k1 said:
Cool, now we need a method to update our clocks. Thanks for sharing firmware.
Click to expand...
Click to collapse
Yes! My watch works again. I followed procedures in zip file and voila watch works! I’m so happy :laugh: Thanks Walek75
cześć
Do you have a watch like that? because I do not know if I have s958 or G05.
Does this firmware do anything good in the operation of the watch?
thx
walek75 said:
Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP
Click to expand...
Click to collapse
Have you got any problems with s958?
---------- Post added at 04:56 PM ---------- Previous post was at 04:56 PM ----------
PetrykPL said:
Hi,
This is my first post on this forum. I wish to ask about firmware for S928 (Makibes G01).
I update firmware by wrong app and now watch only vibrate and screen lighting.
But still I can connect watch by bluetooth, so I can push update by nrf toolbox.
Thanks for help.
Click to expand...
Click to collapse
Have you got any problems with s958?
Anyone can help me? I update my S928 and now pedometer is not working.. Kx023 error shown anytime i reset the watch
s928
hola buenas tardes yo tengo este y hay un mismo modelo pero con diferentes nombres por lo que se ve
lo que no se si los firmwares son los mismos,
SILVER s928 sport v1.52.9 sn:a6c41f, este es el mio
Diggro G01
Can I use this software for my dead smartwatch?
walek75 said:
Hello
I wrote e-mail to Makibes Team and they send me firmware doe G01/G02 watch (it's the same than S928).
You can download it here: http://www.mediafire.com/file/smka4y56t7acc5a/G01_G02.ZIP
Click to expand...
Click to collapse
Hi,
Can you post or pm me the contact address for Makibes please, I need firmware update for my BR1 watch.
Thanks
Makibes G07 problem
Hi,
Can you post or pm me the contact address for Makibes please, I need firmware update for my G07 watch.
Thanks
romystevenj said:
Anyone can help me? I update my S928 and now pedometer is not working.. Kx023 error shown anytime i reset the watch
Click to expand...
Click to collapse
mee too. I have the same problem.
Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
For quick fix, quickly turn loud speaker on & off again. That should help.
joaocandeias said:
Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
Click to expand...
Click to collapse
I have the same phone as you and very often this problem arises, only when not using loudspeakers. If the call was made with loudspeaker mode, it seem to be fine.
nsabir said:
For quick fix, quickly turn loud speaker on & off again. That should help.
Click to expand...
Click to collapse
Thanks, i will try that
joaocandeias said:
Hi i have a problem on my A2017G. Randomly, when i make a call people can't hear me on the other side but i hear them just fine. I live in Portugal and my carrier is Vodafone. The phone was bought on gearbest and is running V1.2.0B09 (updated with zip) Thanks in advance
Click to expand...
Click to collapse
Hi, I also live in Portugal, and I'm also Vodafone with a2017G variant.
I use RR 8.1 rom, and I solved that issue by flashing B32 modem and B32 universal bootloader using latest TWRP by @NFound.
Search for both and let TWRP do its work.
Always nice to see a fellow portuguese around here. Cheers! :highfive::good:
Zootopia said:
Hi, I also live in Portugal, and I'm also Vodafone with a2017G variant.
I use RR 8.1 rom, and I solved that issue by flashing B32 modem and B32 universal bootloader using latest TWRP by @NFound.
Search for both and let TWRP do its work.
Always nice to see a fellow portuguese around here. Cheers! :highfive::good:
Click to expand...
Click to collapse
Obrigado pela resposta! Não tenho tido mais este problema, mas caso volte a acontecer frequentemente farei isso Já agora essa rom é estavel? Abraço.
joaocandeias said:
Obrigado pela resposta! Não tenho tido mais este problema, mas caso volte a acontecer frequentemente farei isso Já agora essa rom é estavel? Abraço.
Click to expand...
Click to collapse
Write in english and in portuguese if you want, but not only the latter. Pretty strict rules about it ?
If you like features and a very customizable environment to work with, and don't mind having an average battery friendly rom, RR is the way to go.
It is rock stable from my end, no issues at all, and very far from beta, although 8.1 Oreo goodness.
Qualquer dúvida, não hesites, abraço ??
Zootopia said:
Write in english and in portuguese if you want, but not only the latter. Pretty strict rules about it ?
If you like features and a very customizable environment to work with, and don't mind having an average battery friendly rom, RR is the way to go.
It is rock stable from my end, no issues at all, and very far from beta, although 8.1 Oreo goodness.
Qualquer dúvida, não hesites, abraço ??
Click to expand...
Click to collapse
Pois, por acaso tinha me lembrado disso das regras mas nem quis saber
That rom seems nice.... I really need to try it someday I love ROM's like that, customizable and with pure android look.
Right now i'm just waiting for stock oreo. I hope it rocks!
Abraço
nsabir said:
For quick fix, quickly turn loud speaker on & off again. That should help.
Click to expand...
Click to collapse
This method is for custom roms. He is using stock rom.
WesTD said:
This method is for custom roms. He is using stock rom.
Click to expand...
Click to collapse
I know. I'm using stock. I too face this problem from time to time. Usually, quickly toggling the loudspeaker on & off fixes it while in call if the other person does not hear me.
Hello! @joaocandeias,
Have you fixed your problem on your phone? Can you send your email to me? I have ZTE engineers friends, and they would like to help you fix this issue. If OK, please send email to Guo. [email protected] or [email protected].
Thank you!!
William Guo said:
Hello! @joaocandeias,
Have you fixed your problem on your phone? Can you send your email to me? I have ZTE engineers friends, and they would like to help you fix this issue. If OK, please send email to Guo. [email protected] or [email protected].
Thank you!!
Click to expand...
Click to collapse
I disabled the "ok google" recognition and it seems that the problem is solved. Thank you anyways
@joaocandeias, ,
I am very glad to hear that you fixed your problem. If have any question, you are most welcome than I can say, and I would feel appreciated to hear your suggestions on AXON 7 or AXON 9.
Thanks for your support!
---------- Post added at 11:43 PM ---------- Previous post was at 11:43 PM ----------
[/COLOR @joaocandeias, ,
I am very glad to hear that you fixed your problem. If have any question, you are most welcome than I can say, and I would feel appreciated to hear your suggestions on AXON 7 or AXON 9.
Thanks for your support!
I am on stock as well. If disabling the google assistant and/or toggling the loudspeaker works then that just saved me from buying a new phone for a while!
Thank you guys <3
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.