Related
Hello guys!
Is your Yu Yureka stuck at the YU boot logo?
Is it not booting any further?
Here you can find the perfect solution to your problem!
Disclaimer
Do it on your own risk
Lets unbrick your device
First of all you will need to download the following files: (remove spaces and the links will work)
1. Minimal ADB Fastboot tool: drive. google. com/file/d/0ByxhrvEhhF3FSFU4SnNFR0hSYmc/view
2. Latest release Cyanogen Recovery and CyanogenMod build (ROM): download. cyanogenmod. org/?device=tomato
3. TWRP Recovery: drive. google. com/file/d/0ByxhrvEhhF3Fc0d6S0hMRTNQSW8/view
Now install the Minimal ADB and Fastboot tool.
After the program is installed correctly, open C:\Program Files\Minimal ADB and Fastboot in your computer.
Copy the CyanogenMod build(ROM) zip file in an external SD card and insert the SD card in your phone.
Now rename the Cyanogen recovery image your downloaded before to recovery.img and then copy it in the Minimal ADB and Fastboot folder. Do copy the twrp.img also in the same folder.
In the folder, hold shift and right click anywhere in the empty space, there will be an option, "open command window here", click that. This is will open cmd prompt window.
Before continuing any further, make sure your device is charged at least 50%.
Now take the battery out from your Yu Yureka and connect it to the computer with the help of micro USB cable.
Yes, connect it without the battery, make sure its connected properly.
after connecting the phone, type this command in the cmd prompt:
fastboot flash recovery recovery.img
If your device is detected and everything will be working,then this will flash the stock cyanogen recovery to your phone.
(Note:You must have renamed it and copied it to the folder as mentioned above )
Now remove the cable from your device, insert the battery, then hold volume up, volume down as well as power button simultaneously for a few seconds. This will take you to the recovery mode.
Format all your data and cache with help of the recovery option.
Now attach the cable again and type this commandin the command prompt:
adb fastboot bootloader
Wait till the device boots into the fastboot mode, thn type this command in the command prompt:
fastboot boot twrp.img
([OPTIONAL] Note: if you want to flash the TWRP recovery permanently on your phone, then type this command instead:
fastboot flash recovery twrp.img
and then manually reboot into recovery mode)
Now you will boot into TWRP recovery. Go to "wipe" option, followed by "advance" option then mark all option you see except sdcard, and wipe it all. This will delete all your data.
Now go to "install" option in the main recovery page. Direct to External SD card and find the CyanogenMod build you copied earlier to it. Then install it.
This will take time. After the installation will complete, TWRP will display the message "Successful".
Then reboot your phone. This will take at most 45 mins to install. So, kepp patients and wait till it boot completely.
Here you go!
your Yu Yureka is unbricked now.
I have tried this on my own Yureka and it works fine
Thank you all! :good:
-------------------------------------------------------------------------------
By Abhishek Shiyal
Twitter: ShiyalAbhi
Instagram: abhi_shiyal
friend i cant understand what said in above line can u describe it step wise i am in serious problem i have yureka plus and i ugraded it cm 13 marshmallow after that when i flash gapps it stuck in yu logo and till then i cant find any solution of it i watching you tube videos but that want work in my cm13 marshmallow updated version phone because these all videos are for cm 12 lolipop
AbhiShiyal said:
Hello guys!
Is your Yu Yureka stuck at the YU boot logo?
Is it not booting any further?
Here you can find the perfect solution to your problem!
Disclaimer
Do it on your own risk
Lets unbrick your device
First of all you will need to download the following files: (remove spaces and the links will work)
1. Minimal ADB Fastboot tool: drive. google. com/file/d/0ByxhrvEhhF3FSFU4SnNFR0hSYmc/view
2. Latest release Cyanogen Recovery and CyanogenMod build (ROM): download. cyanogenmod. org/?device=tomato
3. TWRP Recovery: drive. google. com/file/d/0ByxhrvEhhF3Fc0d6S0hMRTNQSW8/view
Now install the Minimal ADB and Fastboot tool.
After the program is installed correctly, open C:\Program Files\Minimal ADB and Fastboot in your computer.
Copy the CyanogenMod build(ROM) zip file in an external SD card and insert the SD card in your phone.
Now rename the Cyanogen recovery image your downloaded before to recovery.img and then copy it in the Minimal ADB and Fastboot folder. Do copy the twrp.img also in the same folder.
In the folder, hold shift and right click anywhere in the empty space, there will be an option, "open command window here", click that. This is will open cmd prompt window.
Before continuing any further, make sure your device is charged at least 50%.
Now take the battery out from your Yu Yureka and connect it to the computer with the help of micro USB cable.
Yes, connect it without the battery, make sure its connected properly.
after connecting the phone, type this command in the cmd prompt:
fastboot flash recovery recovery.img
If your device is detected and everything will be working,then this will flash the stock cyanogen recovery to your phone.
(Note:You must have renamed it and copied it to the folder as mentioned above )
Now remove the cable from your device, insert the battery, then hold volume up, volume down as well as power button simultaneously for a few seconds. This will take you to the recovery mode.
Format all your data and cache with help of the recovery option.
Now attach the cable again and type this commandin the command prompt:
adb fastboot bootloader
Wait till the device boots into the fastboot mode, thn type this command in the command prompt:
fastboot boot twrp.img
([OPTIONAL] Note: if you want to flash the TWRP recovery permanently on your phone, then type this command instead:
fastboot flash recovery twrp.img
and then manually reboot into recovery mode)
Now you will boot into TWRP recovery. Go to "wipe" option, followed by "advance" option then mark all option you see except sdcard, and wipe it all. This will delete all your data.
Now go to "install" option in the main recovery page. Direct to External SD card and find the CyanogenMod build you copied earlier to it. Then install it.
This will take time. After the installation will complete, TWRP will display the message "Successful".
Then reboot your phone. This will take at most 45 mins to install. So, kepp patients and wait till it boot completely.
Here you go!
your Yu Yureka is unbricked now.
I have tried this on my own Yureka and it works fine
Thank you all! :good:
-------------------------------------------------------------------------------
By Abhishek Shiyal
Twitter: ShiyalAbhi
Instagram: abhi_shiyal
Click to expand...
Click to collapse
how can u connect the device in fastboot mode without the battery????
I have asus zenfone 5 T00F , i just using it for daily use, after that i root it and no problem.. unroot it also no problem, after a month using it, suddenly some app crash then i reboot it..
when reboot it it stuck at Asus Logo.
i can go to the bootloader but the imei and serial number was not correct , (i attach some picture about it)
already tried this
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455 and
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645 but it also not working.
my recovery said E: Error cant mount cache and etc (i also attach picture about it)
any kind of solution ? already searching at asus forum also dont find solution
Thanks before.. and sorry if my english is so bad
Try this Method
De-grade to Kitkat by downloading Kitkat firmware UL-ASUS_T00F-WW-2.22.40.540-user ( Kitkat).
Then Extract Fastboot.img, Boot.img and recovery.img
flash these files throufgh fastboot, for that downoad minimal adb tools and connect your phone through usb when in fastboot mode
flash these files by clicking right while holding shift on the ADB tools folder in Blank space and choose Open command window here .
then type these 4 commands :
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader [wait for the fastboot mode to reopen in phone then]
fastboot flash boot boot.img
fastboot flash recovery recovery.img
after these 4 commands go to recovery through selecting recovery from fastboot.
In recovery, select Update from adb. Now copy firmware.zip in that ADB tools folder which is UL-ASUS_T00F-WW-2.22.40.540-user.zip and rename it to update.zip for ease.
now type in Cmd :
adb sideload update.zip
after this clear data/cache in phone and Your phone will boot.
bludyvenom said:
Try this Method
De-grade to Kitkat by downloading Kitkat firmware UL-ASUS_T00F-WW-2.22.40.540-user ( Kitkat).
Then Extract Fastboot.img, Boot.img and recovery.img
flash these files throufgh fastboot, for that downoad minimal adb tools and connect your phone through usb when in fastboot mode
flash these files by clicking right while holding shift on the ADB tools folder in Blank space and choose Open command window here .
then type these 4 commands :
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader [wait for the fastboot mode to reopen in phone then]
fastboot flash boot boot.img
fastboot flash recovery recovery.img
after these 4 commands go to recovery through selecting recovery from fastboot.
In recovery, select Update from adb. Now copy firmware.zip in that ADB tools folder which is UL-ASUS_T00F-WW-2.22.40.540-user.zip and rename it to update.zip for ease.
now type in Cmd :
adb sideload update.zip
after this clear data/cache in phone and Your phone will boot.
Click to expand...
Click to collapse
Already tried that and also not working bro , i attach some picture about it.
adb sideload not flashing the firmware and just stopped with /cache mount error
xbeelzx said:
I have asus zenfone 5 T00F , i just using it for daily use, after that i root it and no problem.. unroot it also no problem, after a month using it, suddenly some app crash then i reboot it..
when reboot it it stuck at Asus Logo.
i can go to the bootloader but the imei and serial number was not correct , (i attach some picture about it)
already tried this
http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455 and
http://forum.xda-developers.com/zenfone-5/help/zenfone-5-a500cg-zenfone-6-a600cg-t3354645 but it also not working.
my recovery said E: Error cant mount cache and etc (i also attach picture about it)
any kind of solution ? already searching at asus forum also dont find solution
Thanks before.. and sorry if my english is so bad
Click to expand...
Click to collapse
Your phone partition has broke need to repartition. Try this http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Choose nr 13 Zenfone Rescue
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Your phone partition has broke need to repartition. Try this http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Choose nr 13 Zenfone Rescue
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
already try nr 13 bro. when i press 13, the xfstk running.. when it want to repartitioning emmc (maybe it should automatically enter bootloader), i manually enter the bootloader then the script running , some error occured and when it finish flashing same error still occured x,x
i attach some picture about it
xbeelzx said:
already try nr 13 bro. when i press 13, the xfstk running.. when it want to repartitioning emmc (maybe it should automatically enter bootloader), i manually enter the bootloader then the script running , some error occured and when it finish flashing same error still occured x,x
i attach some picture about it
Click to expand...
Click to collapse
How is the result when you finish it?
I didnt see something wrong in there.
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
How is the result when you finish it?
I didnt see something wrong in there.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
still stuck at asus logo bro, and recovery still error mount cache
today, i flash Los 13 from Los 14. I tried flash twrp by tool,cmd fastboot but recovery is stock. i tried flash MIUI 7.5.4 and i can boot into TWRP 1 time. And now, i dont flash twrp (twrp dont ovewrite stock recovery). i boot into recovery but it's stuck logo Mi 3,4 times and reboot nomal
can anyone help me flash twrp ?
thank
kirianti94 said:
today, i flash Los 13 from Los 14. I tried flash twrp by tool,cmd fastboot but recovery is stock. i tried flash MIUI 7.5.4 and i can boot into TWRP 1 time. And now, i dont flash twrp (twrp dont ovewrite stock recovery). i boot into recovery but it's stuck logo Mi 3,4 times and reboot nomal
can anyone help me flash twrp ?
thank
Click to expand...
Click to collapse
1.- Boot in fastboot mode (power and vol- buttons until the FASTBOOT logo shows up). Connect the phone with USB cable.
2.- Using Windows file explorer, go into the TWRP installer folder, there press and hold the shift key, and right clic the folder. Then click "open command line here".
3.- In the cmd window that opens, write "fastboot devices". Your phone's serial number and the word "fastboot" will appear. If not, the device is not being detected and you need to install the adequate driver. Look in google.
4.- Write "fastboot flash recovery [the name of the TWRP file inside the folder including the .img extension]". Press enter. You will see the output messages in the window, you must not see any error messages.
6.- After flashing the recovery without errors, DON'T REBOOT OR TURN OFF THE PHONE. THIS WILL ERASE TWRP AND INSTALL STOCK RECOVERY AGAIN.
7.- write "fasbtoot boot recovery [the name of the TWRP file inside the folder including the .img extension]". The phone will boot into TWRP
8.- Inside TWRP go to Advanced > Disable DM-verity
9.- Now you can flash custom roms and stuff. To boot into recovery mode power off the phone, press vol+, vol- and power buttons for 3 seconds, then release buttons and wait.
If none of the above works, maybe your bootloader got re-locked after flashing some MIUI ROM and that's why you can't flash TWRP or another ROM.
If the bootloader gets re-locked? We have to ask the permission again? R directly v can unlock using unlock tool? Is der any chances to relock bootloader? By how? Thank u...
thank for help.i flash miui 8.1.1.0 first, fastboot no re-locked ( I checked my status develop option and MI unlocker ). i flash twrp by flour_mo, it dont work but when i flash twrp-caffe 3.0.1 by fedosis ( LOS 13 ) it work. And i can boot into recovery.
moralesnery said:
1.- Boot in fastboot mode (power and vol- buttons until the FASTBOOT logo shows up). Connect the phone with USB cable.
2.- Using Windows file explorer, go into the TWRP installer folder, there press and hold the shift key, and right clic the folder. Then click "open command line here".
3.- In the cmd window that opens, write "fastboot devices". Your phone's serial number and the word "fastboot" will appear. If not, the device is not being detected and you need to install the adequate driver. Look in google.
4.- Write "fastboot flash recovery [the name of the TWRP file inside the folder including the .img extension]". Press enter. You will see the output messages in the window, you must not see any error messages.
6.- After flashing the recovery without errors, DON'T REBOOT OR TURN OFF THE PHONE. THIS WILL ERASE TWRP AND INSTALL STOCK RECOVERY AGAIN.
7.- write "fasbtoot boot recovery [the name of the TWRP file inside the folder including the .img extension]". The phone will boot into TWRP
8.- Inside TWRP go to Advanced > Disable DM-verity
9.- Now you can flash custom roms and stuff. To boot into recovery mode power off the phone, press vol+, vol- and power buttons for 3 seconds, then release buttons and wait.
If none of the above works, maybe your bootloader got re-locked after flashing some MIUI ROM and that's why you can't flash TWRP or another ROM.
Click to expand...
Click to collapse
when I flash twrp.img but it dont overwrite strock recovery ( fastboot was unlocked)
kirianti94 said:
when I flash twrp.img but it dont overwrite strock recovery ( fastboot was unlocked)
Click to expand...
Click to collapse
What is shown on the cmd window? Is there any error on the phone's screen?
Could you provide a screenshot at least?
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Flash Latest NON-HLOS.bin before flashing any volte ROM.
Flash through fastboot
File link
https://drive.google.com/file/d/0B8Vodzmhc0GlXzdtOUFjb29EOFU/view
Extract .zip
Copy NON-HLOS.bin in adb folder
Open command prompt here
Connect phone into fastboot mode
Type command
fastboot -i 0x1ebf flash modem NON-HLOS.bin
Wait till process done.
Disconnect phone
Remove battery and insert again
Goto twrp recovery.
Install any volte enabled ROM.
Enjoy.:good:
OEM unlock command not found
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
nischait said:
DWYOR
After a long time of googling I got a solution for yu5510a full access.
You need
Adb + fastboot
Twrp 2.8.7.0 tomato
SuperSU.zip
Coolpad drivers
Cyanogen ROM V1 from firmwarefile.com
Any Custom Rom, I am using aosp extended.
Gapps
Memory card
Install all drivers , adb & fastboot.
First flash Cyanogen ROM using YGDP tool
Use version 3.98 in other versions I got problems.
After ROM installation enable developer option.
Enable android debugging, fast reboot and check update cyanogen recovery
Now connect phone with PC
Goto adb folder
Copy twrp.img in adb folder
Shift + Right click select open command window here
Type adb devices
Device should be shown if not showing try to install adb drivers
Now after that
Type Command adb reboot-bootloader
Device will be rebooted in bootloader
Type command fastboot -i 0x1ebf oem device-info to verify device in fastboot mode and your bootloader is unlocked or not.
If bootloader showing unlocked then follow next process if not then unlock it
Type command fastboot -i 0x1ebf oem unlock
Boot loader unlocked now.
Remove data cable and remove battery from phone for 30 secs and reinsert again.
Press volume + key and hold
Attach phone with PC ( it shows fastboot mode)
After that type command
fastboot -i 0x1ebf flash recovery twrp.img
When done remove data cable & battery
After 30 secs reinsert battery
Press Volume + , Volume - & Power key
When yu logo appears release power key and keep pressing both volume keys
You will be goto twrp
Now wipe everything also format data/don't delete mmc
Restart twrp to recovery
Your internal and external storage are mounted.
Install any custom ROM for yureka/yureka plus
Flash gapps ( not required in miui & quarkos)
Flash SuperSU.zip
Reboot
It takes 10-15 minutes for first boot .
Done
Click to expand...
Click to collapse
nithin1664 said:
hi,
I am trying to root my yu yureka plus( YU5510A white color) running android 5.1.1 , build number is 5.1.111.P0.160314.YU5510A , i am able to connect the phone to my PC running adb,
"adb devices" lists the phone , "adb reboot bootloader" puts the phone in fastboot ( screeen doesnt show fastboot instead it shows do not disconnect usb cable and non secure phone). When i run the command fastboot -i 0x1ebf oem unlock , im getting the error as command not found. same error im getting when i run the command fastboot -i 0x1ebf oem device-info
what could be the reason.
Any help in this regard is appreciated.
Click to expand...
Click to collapse
Try without using 0x1ebf and report.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Yogesh1969 said:
I tried without -i 0x1ebf also but it does not show in fastboot. With -i 0x1ebf it shows "xyznumbers fastboot" . The problem now is , I flashed through YGDP tool and now it shows aboot failed image, and does not boot at all.
Why doe my phone show non secure phone ?
Please help.
Click to expand...
Click to collapse
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
nischait said:
Try without using 0x1ebf and report.
Click to expand...
Click to collapse
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
nischait said:
Download cyanogen ROM and flash it with ygdp
1st ever rom uploaded in AFH.
Your device should be boot up.
Then try with command prompt.
May be new device having different device ID.
Click to expand...
Click to collapse
I couldnt find the ygdp version of Cynogen, any way I found a way from youtube which solved my problems.
Link : https://www.youtube.com/watch?v=2Gpz65r2pNM
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
For drivers problem install pdanet. And you can refer to the youtube video link (above post) if you want for all needs.
vijaykumarbabu079 said:
Hi...
I too face the same problem, I tried fastboot adb and YU yureka drivers reinstalling and connected device to PC it gets charger when connection in on, when connected in fastboot mode on device it shows fastboot but when check in PC for device info, it dosen't show any connected device. I followed many tutorials for this to install TWRP but its impossible to install without establishing a proper connection. I also tried to install TWRP without PC, for this i need to root my device and flash TWRP img, so I started trying root I had used kingroot, kingoroot, towelroot and some more but failed to root, I am still trying to install TWRP can anyone help me in either of the process to install TWRP.
Click to expand...
Click to collapse
Getting your device connected is a very important stage, whether it is system,recovery or fastboot. From what I read , you can connsct through fasatboot, since you flashed cyanogen. Just flash TWRP 3.2.1 or so which is the latest, through fastboot:
fastboot flash recovery twrp.3.2.1 .img ( Remember the spaces, the name twrp.xxx.img should be same as you downloaded. If flash is successful, you can see twrp when you boot to recovery. Then flash supersu file and/or whichever rom you want.
Sorry for late answers.
I was lil busy and sorry for wrong address also.
You could get it from firmwarefile.com
I can't post link here but select yu yureka plus variant and download oldest CBP
Hi There.
Maybe a newbie problèm but in order to unlock bootloader and Root my device, can't install the twrp.img file on cmd i can reboot on fastboot mode but fastboot boot twrp-......IMG still getting me no such a file...
I've checked and reinstalled drivers by autorised unsigned drivers,when i look on my Android adb device all seems good..
Any ideas?
Fastboot boot twrp.img enter see your phone load in to twrp mode .. then restart using twrp . After boot . Agin go fastboot mode and type fastboot flash recovery twrp .img (u can drag this file also if u want or manualy typing as u wish) . Enter and wait few sec. Its finish. Then type fastboot reboot (remembar before hiting entar tap volume down switch then hit entar). Now u feel viberet and see twrp logo . Then go wipe advanced wipe tik the ASDF swipe to conform. And then restart ur phone.... congarts u have succesfully install twrp ... enjoy .
THX it s more clear i ll try and let u know
First of all download the app TWRP from play store . Then download the latest version of twrp from there .
Then you have to unlock your bootloader by using the app unlock device tool . After unlocking the bootloader go to developer option and enable USB debugging . After that connect your laptop or PC to your mobile . An option will come on your screen to allow debugging to the device . Allow it permanently . Then open adb (I hope you have installed it otherwise download and install it Just google it download adb ) After installing open C drive and then go to adb . Then open command prompt there by pressing cntrl shift and right click . there will be an option to open command prompt there . After opening just type adb devices there in the command prompt it will show your device serial no. Then move the twrp file from your mobile to PC and to adb folder . Then rename it to recovery .
Then switch off your mobile and open fastboot mode by pressing power button and volume up button . then go to the command prompt you have opened before . type there fastboot devices . it will show your device serial no. Then type Fastboot flash recovery recovery. Img then wait for some time after the processing gets over in there . then switch off the mobile by removing battery and switch on to recovery mode by pressing power button and volume down button . Congrats twrp has been installed successfully in your device . You will see twrp window. If this works then thumbs up