Related
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.
GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk
lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!
I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.
Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me
Can you speak more clearly?I don't understand.Because my English is not very good.
zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?
Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?
Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse
I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)
Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.
Did you managed to fix this?
Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.
Hey everyone,
I'm very new to Android development and XDA, but a few years ago I bricked this LG G2 and I don't really remember how, except that I rooted it and tried to install a custom ROM, which obviously didn't work.
I have tried a number of different guides on these forums, but somewhere or another I get stuck on them.
[HOW TO] Fix your soft-bricked LG G2 (All Variants)
I'll be very specific, something most people lack of. Okay lets get to it, I recently bricked my LG G2 (D801) by installing a ROM that wasn't compatible with my model. I fixed it by doing the following steps. This worked for me using Windows 8.1...
forum.xda-developers.com
With this one, although the device shows up in Devices and Printers, neither Fastboot nor the LG Flash Tool detect it. I have installed both the LG Mobile Driver and the LG United Mobile Driver.
“./fastboot devices” is empty.
I have the TOT file and the DLL that the (patched version of the) LG Flash Tool requires.
I have an Ubuntu 20.04 install as well as Windows 11. I can get into Firmware Update with a USB icon ("Do not unplug the USB connection until the process is complete. 0%." ...etc), when I turn it on normally it shows a battery made out of grey and white bars and a percentage, and sometimes the LG logo.
If you need to know anything else don't hesitate to ask \
Much appreciated,
ninjadev64
use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.
DvineLord said:
use a usb 2.0 port, update adb/fastboot, update drivers, remove previous related devices using nirsoft usbdeview. try using a windows 7 or earlier system. can you manually get into recovery? if so update to latest blastagator twrp which should be 3.3.1.
Click to expand...
Click to collapse
- I was using a 3.0 port, although it still showed up in Control Panel - I’ll try with a 2.0 port today
- I installed “Minimal ADB and Fastboot” and the drivers yesterday, so they should be up to date
- I’ll use usbdeview too
- I can’t use an older system unfortunately
- How do I get into recovery?
Recovery: With the device powered off and usb unplugged, hold Volume Down + Power. When the LG logo appears, release both buttons and hold Volume Up + Volume Down.
Ok, so I got into a factory reset screen that way, I said yes to factory reset, is that the right thing to do? (@DvineLord)
ADB recognises the device, but it's unauthorised. And I obviously can't boot it up to authorise it.
Factory reset just got me back to the LG screen for a long time, so I powered it off again.
Also, when I try to change the COM port to 41, when I click Advanced in Port Settings, it just stops me with "You must have write privileges in the registry for this device in order to modify the device's advanced settings".
I can't find the right path for the device in regedit to follow these steps: https://forums.techguy.org/threads/need-write-permission-for-com1-port.577543/#post-4756991
Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?
DvineLord said:
Were you able to get into Recovery? or did you get into Bootloader/Fastboot/Download?
Bootloader/Fastboot/Download: With the device powered off, hold Volume Up and connect the USB cable.
You want to be in Recovery like I posted above. Do you have TWRP on your device?
Click to expand...
Click to collapse
The recovery method you said to try got me into a factory reset screen, as I stated. All the other recovery methods I saw online didn’t work, so maybe I have no recovery?
I said in the original post that I can obtain download mode. I recognise “TWRP” but I’m pretty sure I botched it up while installing it, because I didn’t know how any of this worked, 4 years ago.
Thank you!
Unfortunate you can't get ADB/Fastboot working.
DvineLord said:
Unfortunate you can't get ADB/Fastboot working.
Click to expand...
Click to collapse
Soo... what can I do?
Try to recall as closely as possible the exact steps you used to modify your device. autorec, ioroot, stump root, avicohh, stock build you were on, custom rom you tried to flash, custom recovery, bootstacks, custom kernel, etc.
Odds are you'll have to try again to flash back to stock, something which I haven't done yet.
Unfortunately all I know is that I tried to install a custom ROM, scuffed up when I was installing twrp, the ROM didn't work and now I have no recovery to fix it. Flash back to stock *is* what I'm trying to do (that's your third question/point which I've already explained in the original post).
If anyone with the same problem visits this in the future, please save this post and share your solution if you find one, cause I'm still stuck!
hope you get it flashed back to stock. make sure to do the first 5 things i listed in my initial post to see if that helps you flash back to stock. the data cable can also make a difference sometimes too.