If, like me, you find your Honor 7's maximum volume still too low, here are the steps to increase it, and finally be able to fully hear your music in public.
First, you need a ROOTED HONOR 7 PLK-L01.
Then you need a file browser like Root browser or so.
You will also need a xml file editor like QuickEdit.
1. Go to system>emui>base>prop
Open local.prop with QuickEdit.
Go to: ro.config.hw.security_volume=14
Change it to #ro.config.hw.security_volume=14
OR
ro.config.hw.security_volume=20 (it increases the maximum, it doesnt change the volume itselfs but prevents it to be locked by the security from Emui)
2. Go to system>hw_oem>Plank-L01>prop
Open local.prop
Same as before, change the value or add a # before the line.
Note that i'm not fully sure if this steps are mandatory but it will prevent a non working volume tweak occured because of the Emui's volume security.
3. Now go to system>etc>audio>hi6402
Open mixer_volumes_PLK_L01_ce.xml with QuickEdit.
Go to:
<path name="dup-media-fm-headset">
<ctl name= "S1 IL PGA GAIN" value="250" />
<ctl name= "S1 IR PGA GAIN" value="250" />
(QuickEdit has a search option on the top right corner)
And change the values to what you think is enough for you.
For me its 265, like this:
ctl name= "S1 IL PGA GAIN" value="265" />
And it should be it ! Don't forget that security volume is set to prevent auditive damages so please be careful with the values you set.
That's only for a headset, you need the change the value manually for the speaker too, with the same method.
If you have any questions or need help i'll gladly help.
Also if the steps 1 and 2 arent mandatory, i'd be happy to know.
EDIT:
Seems that you also need to change these values now (can't tell from which update this came from) for the tutorial to work:
@ Path name="media-headphone"
ctl name= "s1 IL PGA GAIN"
ctl name= s1 IR PGA GAN"
Cant find step 1 and 2 in system
Thank you
Could You be so kind and give us step by step for speakers please?
Much obliged.
For me existing volume is sufficient
magnea said:
Cant find step 1 and 2 in system
Click to expand...
Click to collapse
What version of Emui do you have?
Demeth said:
What version of Emui do you have?
Click to expand...
Click to collapse
B330
---------- Post added at 12:26 AM ---------- Previous post was at 12:26 AM ----------
rspn69 said:
B330
Click to expand...
Click to collapse
What about u?
rspn69 said:
B330
---------- Post added at 12:26 AM ---------- Previous post was at 12:26 AM ----------
What about u?
Click to expand...
Click to collapse
Are you properly rooted? Check it with SuperSU.
What file browser do you have?
Raven78uk said:
Thank you
Could You be so kind and give us step by step for speakers please?
Much obliged.
Click to expand...
Click to collapse
That's the exact same method but you have to change <path name="dup-media-fm-speaker"> instead.
Tell me if you can't find it.
I have neither the EMUI or HWOEM folder under system on build B180. I do have the /etc. folder and relevant files. I'm using a root explorer and proper root.
Any suggestions?
Unillogical said:
I have neither the EMUI or HWOEM folder under system on build B180. I do have the /etc. folder and relevant files. I'm using a root explorer and proper root.
Any suggestions?
Click to expand...
Click to collapse
Neither do I
Raven78uk said:
Neither do I
Click to expand...
Click to collapse
Is changing the values working?
Raven78uk said:
Neither do I
Click to expand...
Click to collapse
I think you must have MM b320
magnea said:
I think you must have MM b320[/QUOT
Does this mean this problem is for b320
Click to expand...
Click to collapse
Demeth said:
Is changing the values working?
Click to expand...
Click to collapse
Didn't had the chance to do it yet. Also seems that values You recommending are massively to big.
EDIT: Just took a peek inside file : mixer_volumes_PLK_L01_ce.xml and there is line for headphones You was writing about. But for speakers i just dont know which one to change as there is 'hundreds' similar with word 'speaker'.
Can You tell me exact line to change for higher volume of speaker ?
magnea said:
I think you must have MM b320
Click to expand...
Click to collapse
I indeed run B320, don't know for the other versions yet.
Raven78uk said:
Didn't had the chance to do it yet. Also seems that values You recommending are massively to big.
EDIT: Just took a peek inside file : mixer_volumes_PLK_L01_ce.xml and there is line for headphones You was writing about. But for speakers i just dont know which one to change as there is 'hundreds' similar with word 'speaker'.
Can You tell me exact line to change for higher volume of speaker ?
Click to expand...
Click to collapse
I have a root issue, i'll tell you what exact line as soon as i can have access to my folder again.
Demeth said:
Is changing the values working?
Click to expand...
Click to collapse
Demeth said:
I have a root issue, i'll tell you what exact line as soon as i can have access to my folder again.
Click to expand...
Click to collapse
Thank You, please let me know when You can.
in the directory system, not exist folder "emui".
Demeth said:
That's the exact same method but you have to change <path name="dup-media-fm-speaker"> instead.
Tell me if you can't find it.
Click to expand...
Click to collapse
B330/Android 6.0
There is no simple value changing as in
Code:
<path name="dup-media-fm-headset" >
<ctl name="S1 IL PGA GAIN" value="265" />
<ctl name="S1 IR PGA GAIN" value="265" />
</path>
There is
Code:
<path name="dup-media-fm-speaker" >
<path name="media-speaker" />
</path>
So what or how to change?
And what does
Code:
<path name="dup-media-fm-headphone" >
<ctl name="S1 IL PGA GAIN" value="250" />
<ctl name="S1 IR PGA GAIN" value="250" />
</path>
do? I did not change those, just <path name="dup-media-fm-headset" > - do I need to edit those values too?
I really would like to push up the volume just a little bit for the main speakers.
Is this for bottom speaker? Since I cannot hear any difference on earpiece speaker at all.
Could someone save exampled mixer files to download? I think my files have some low values, because my earpiece is very low.
Related
i found this tweak on getting the tegra 3 effects on any android device and it worked
So here's the steps for the tweak:
1.First of all, enable graphics details to high in setup/others.
2.Exit game.
3.Use root explorer like ES File Explorer.
4.Go to /data/data/com.madfingergames.deadtrigger/shared_prefs/ folder.
5.Edit com.madfingergames.deadtrigger.xml file.
6.Change <int name=”UnityGraphicsQuality” value=”1? /> to <int name=”UnityGraphicsQuality” value=”2? />.
7.Change <int name=”OptionsGraphicDetail” value=”2? /> to <int name=”OptionsGraphicDetail” value=”3? />.
8.Save it.
9.Modify permissions to remove all write permission on User, Group and Other.
10.Delete com.madfingergames.deadtrigger.xml.bak.
11.That’s all.
here's also a video to show that this tweak works 100%
http://www.youtube.com/watch?v=tAls7xX8XVY
udimars30 said:
i found this tweak on getting the tegra 3 effects on any android device and it worked
So here's the steps for the tweak:
1.First of all, enable graphics details to high in setup/others.
2.Exit game.
3.Use root explorer like ES File Explorer.
4.Go to /data/data/com.madfingergames.deadtrigger/shared_prefs/ folder.
5.Edit com.madfingergames.deadtrigger.xml file.
6.Change <int name=”UnityGraphicsQuality” value=”1? /> to <int name=”UnityGraphicsQuality” value=”2? />.
7.Change <int name=”OptionsGraphicDetail” value=”2? /> to <int name=”OptionsGraphicDetail” value=”3? />.
8.Save it.
9.Modify permissions to remove all write permission on User, Group and Other.
10.Delete com.madfingergames.deadtrigger.xml.bak.
11.That’s all.
here's also a video to show that this tweak works 100%
http://www.youtube.com/watch?v=tAls7xX8XVY
Click to expand...
Click to collapse
mate my after doing all this my game has started laging alot
Not trying to be rude..but if you know how to root your phone...most likely you can manage to get the tegra 3 all device version which is floating around everywhere....
tenjakid said:
Not trying to be rude..but if you know how to root your phone...most likely you can manage to get the tegra 3 all device version which is floating around everywhere....
Click to expand...
Click to collapse
you mean to say that i can change my hardware??
Oh.. I just can't find the Path to edit the XML... : /
EDIT : Works, it's perfect and really beautiful !
udimars30 said:
i found this tweak on getting the tegra 3 effects on any android device and it worked
So here's the steps for the tweak:
1.First of all, enable graphics details to high in setup/others.
2.Exit game.
3.Use root explorer like ES File Explorer.
4.Go to /data/data/com.madfingergames.deadtrigger/shared_prefs/ folder.
5.Edit com.madfingergames.deadtrigger.xml file.
6.Change <int name=”UnityGraphicsQuality” value=”1? /> to <int name=”UnityGraphicsQuality” value=”2? />.
7.Change <int name=”OptionsGraphicDetail” value=”2? /> to <int name=”OptionsGraphicDetail” value=”3? />.
8.Save it.
9.Modify permissions to remove all write permission on User, Group and Other.
10.Delete com.madfingergames.deadtrigger.xml.bak.
11.That’s all.
here's also a video to show that this tweak works 100%
http://www.youtube.com/watch?v=tAls7xX8XVY
Click to expand...
Click to collapse
already posted here on xda since long time use search button dude !
UnityGraphicsQuality reverts to 1 after you exit the game.
Thanks dood! I am going to try this in a minute.... Very cool tip!
Sent from my SGH-T999 using Tapatalk 2
UnityGraphicsQuality reverts to 1 after you exit the game.
Click to expand...
Click to collapse
That should be fixed through the removal of the write-permission.
If it still does it, do the following:
Open Terminal Emulator
Type
su
chattr +i /data/data/com.madfingergames.deadtrigger/shared_prefs/com.madfingergames.deadtrigger.xml
Click to expand...
Click to collapse
Note that this will revoke write-/delete-permission for EVERYONE (including root himself!) so you'll probably want to revert it by running the command with a minus instead of a plus should you ever uninstall the game.
cannot find the xml file
so guys this is the deal - somehow I cannot find that xml file in which I would change those two lines ... I do not even have that prefs folder ... what to do :-/
I had to change graphic options to 4 instead of 3 to get ultra high.
Sent from my GT-I9300 using XDA
Works like a charm, only thing i'd say is, once you've changed the xml file, don't go ahead and change the settings within the game, check that it's on ultra high, but don't change it because as soon as you do, it disappears and you have to restart the game to get it back.
Thanks for this, runs really well.
---------- Post added at 08:19 AM ---------- Previous post was at 08:18 AM ----------
vegeta1 said:
mate my after doing all this my game has started laging alot
Click to expand...
Click to collapse
Weird seeing someone else with my avatar
This doesnt work anymore as april 8th 2013
i can't fin data/data only data folder that is empty! using s4 es explorer when i chsoe root explrer from menue it says device not supported but when i click on "/" icon it work but data is empty and there is data_0 data_1 data_2 data_3 and mroe,,
---------- Post added at 03:06 PM ---------- Previous post was at 02:53 PM ----------
nvm fixed used rooo explorer
---------- Post added at 03:12 PM ---------- Previous post was at 03:06 PM ----------
can't find options graphic but did that to unity detail
nvm again
so sorry
not all games use unity ! like RGP2 ! i also tried GLtools, didnt work no good Tegra 4 devices out !
To anyone who has installed Kitkat XXUFNAD and lost write access to their SDcard, here is a solution.
I am not the original person who found this solution , I'm just putting it together here to help others.
You need root access to do this, of course.
1. Use something like root explorer to to go to the root folder
2. From there go to folder system/etc/permissions
3. Look for file called "platform.xml"
4. Edit this file ( your editor should open it in R/W mode )
5. Locate the following line :
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
6. Add this line " <group gid="media_rw" />", so you get
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
<group gid="media_rw" />
</permission>
7. Save the file
8. Reboot
You should now have WRITE access back for your SDcard.
I have done this on my i9505 snapdragon without any issue.
All the usual caveats apply ie I not responsible etc etc
I can only assume that when Samsung release the official version, they will put this feature back.One of the fundamental reason I have bought and stayed with Samsung is because of the SDCARD possibility.
sohotha said:
To anyone who has installed Kitkat XXUFNAD and lost write access to their SDcard, here is a solution.
I am not the original person who found this solution , I'm just putting it together here to help others......
I can only assume that when Samsung release the official version, they will put this feature back.One of the fundamental reason I have bought and stayed with Samsung is because of the SDCARD possibility.
Click to expand...
Click to collapse
Good, good, I feel that the Force is strooong in you, young padawan. But, still the learning need you. It will be a day, when the force will allow you to be able with understanding to read, and to search.
But you are not patiently waiting until your abilities will grow I see. Into the dark side it will take you, I feel.
For the next time, instead to rediscover the America, please read the General section. Doing such, this old info you will find.
And now return to the Jedi practice with sword I recommend you to get stronger force control I ask you.
:laugh::laugh:
spamtrash said:
Good, good, I feel that the Force is strooong in you, young padawan. But, still the learning need you. It will be a day, when the force will allow you to be able with understanding to read, and to search.
But you are not patiently waiting until your abilities will grow I see. Into the dark side it will take you, I feel.
For the next time, instead to rediscover the America, please read the General section. Doing such, this old info you will find.
And now return to the Jedi practice with sword I recommend you to get stronger force control I ask you.
:laugh::laugh:
Click to expand...
Click to collapse
Yes .. yes.. I find myself too impatient to look for the ways of the power of the "SEARCH" on my path to enlightenment ...:crying:
sohotha said:
Yes .. yes.. I find myself too impatient to look for the ways of the power of the "SEARCH" on my path to enlightenment ...:crying:
Click to expand...
Click to collapse
:good:
Camera not working after this tweak
Hi all!
I've updated from 4.3 to 4.4.2 Samsung Rom (tw). My case NB8.
Titanium Backup has stopped working. Shows the error "not enough space" when backing up to external sd card. Also, it shows that extsdcard is not writeable.
Here's the solution for i9505 to get it working, of course you need root to do that. It may work for other apps too and other phone models such i9500:
Edit file platform.xml in system/etc/permissions (make a backup first).
Search for this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
Add this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
[COLOR="Green"][B]<group gid="media_rw" />[/B][/COLOR]
</permission>
Save changes and reboot.
Regards.
cybdani said:
Hi all!
I've updated from 4.3 to 4.4.2 Samsung Rom (tw). My case NB8.
Titanium Backup has stopped working. Shows the error "not enough space" when backing up to external sd card. Also, it shows that extsdcard is not writeable.
Here's the solution for i9505 to get it working, of course you need root to do that. It may work for other apps too and other phone models such i9500:
Edit file platform.xml in system/etc/permissions (make a backup first).
Search for this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
Add this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
[COLOR="Green"][B]<group gid="media_rw" />[/B][/COLOR]
</permission>
Save changes and reboot.
Regards.
Click to expand...
Click to collapse
Lifesaver, cheers! Now if only there was a way for TB to restore all your apps without you having to click Install and Done on each one, this will take all day!
nrps1 said:
Lifesaver, cheers! Now if only there was a way for TB to restore all your apps without you having to click Install and Done on each one, this will take all day!
Click to expand...
Click to collapse
The pro version does not ask to install afaik. It installs all apps automaticly
Gesendet von meinem GT-I9505 mit Tapatalk
benni2903 said:
The pro version does not ask to install afaik. It installs all apps automaticly
Gesendet von meinem GT-I9505 mit Tapatalk
Click to expand...
Click to collapse
It looks to me like the ROM security itself, whenever I install anything it prompts for me to accept permissions etc, does this still apply?
If you are using the batch restore(?)(restore all backups + data) then it will not ask for every single app. TB just installs everything in the background
Gesendet von meinem GT-I9505 mit Tapatalk
benni2903 said:
If you are using the batch restore(?)(restore all backups + data) then it will not ask for every single app. TB just installs everything in the background
Gesendet von meinem GT-I9505 mit Tapatalk
Click to expand...
Click to collapse
Yes, you are right benni2903.
I hope that this thread can help to users that are upgrading to TW 4.4.2. I've spent over half an hour to find out where the problem was.
Regards
benni2903 said:
If you are using the batch restore(?)(restore all backups + data) then it will not ask for every single app. TB just installs everything in the background
Gesendet von meinem GT-I9505 mit Tapatalk
Click to expand...
Click to collapse
Strange, that is exactly what I chose and it was indeed asking for each one it needed to download (I assume). Oh well, I just flashed firmware and signed in on 1st boot and Google handled the rest instead!
nrps1 said:
Strange, that is exactly what I chose and it was indeed asking for each one it needed to download (I assume). Oh well, I just flashed firmware and signed in on 1st boot and Google handled the rest instead!
Click to expand...
Click to collapse
I don't configure my google account after a firm upgrade (if I deleted all data) until I've restored all apps using titanium. I install the free version from my external sd.
cybdani said:
Hi all!
I've updated from 4.3 to 4.4.2 Samsung Rom (tw). My case NB8.
Titanium Backup has stopped working. Shows the error "not enough space" when backing up to external sd card. Also, it shows that extsdcard is not writeable.
Here's the solution for i9505 to get it working, of course you need root to do that. It may work for other apps too and other phone models such i9500:
Edit file platform.xml in system/etc/permissions (make a backup first).
Search for this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
Add this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
[COLOR="Green"][B]<group gid="media_rw" />[/B][/COLOR]
</permission>
Save changes and reboot.
Regards.
Click to expand...
Click to collapse
Many many thanks for sharing this!
It really did the trick!
I was about to rip my hair off, didn't know whether to ask the kernel developer or the titanium support first.
Also TB doesn't need internet connection ob startup for license check. Now I can also use TB again offline with full functionality
You saved my day
P.S. I'll hit the thanks buttons tomorrow,i spend all my thanks today for @ktoonsez awesome kernel
thank you! this saved me from pulling my hair out when i flashed a new rom!
cybdani said:
Hi all!
I've updated from 4.3 to 4.4.2 Samsung Rom (tw). My case NB8.
Titanium Backup has stopped working. Shows the error "not enough space" when backing up to external sd card. Also, it shows that extsdcard is not writeable.
Here's the solution for i9505 to get it working, of course you need root to do that. It may work for other apps too and other phone models such i9500:
Edit file platform.xml in system/etc/permissions (make a backup first).
Search for this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
Add this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
[COLOR="Green"][B]<group gid="media_rw" />[/B][/COLOR]
</permission>
Save changes and reboot.
Regards.
Click to expand...
Click to collapse
Hi there - tried doing this fix using ES File Explorer - initially it wouldn't save so I coped the file out of original file path to internal SD to test and was able to save - tried pasting new file in and got error that the file system was read only (which was likely my original problem as suspected). How to I get around this, or change the file path location to writeable to simply save the original platform.xml?
Thanks,
~snowin
Disregard - I failed to see the little button where I could change permissions on the permissions folder Thanks for looking
---------- Post added at 06:08 PM ---------- Previous post was at 05:22 PM ----------
OK - so after re-booting my internal SD card seems to be "lost". A bunch of apps FC including titanium. I can access my external SD card using ES @ /storage/extsdcard but the /sdcard/ & storage/emulated are all blanks. Can someone point me in the right direction? I'm running ezkat 2.0 ROM for Note ii
snowin said:
Hi there - tried doing this fix using ES File Explorer - initially it wouldn't save so I coped the file out of original file path to internal SD to test and was able to save - tried pasting new file in and got error that the file system was read only (which was likely my original problem as suspected). How to I get around this, or change the file path location to writeable to simply save the original platform.xml?
Thanks,
~snowin
Disregard - I failed to see the little button where I could change permissions on the permissions folder Thanks for looking
---------- Post added at 06:08 PM ---------- Previous post was at 05:22 PM ----------
OK - so after re-booting my internal SD card seems to be "lost". A bunch of apps FC including titanium. I can access my external SD card using ES @ /storage/extsdcard but the /sdcard/ & storage/emulated are all blanks. Can someone point me in the right direction? I'm running ezkat 2.0 ROM for Note ii
Click to expand...
Click to collapse
Before to edit file, you need to mount system as RW. Then you can edit and save file. Root Explorer is better than es file explorer.
cybdani said:
Hi all!
I've updated from 4.3 to 4.4.2 Samsung Rom (tw). My case NB8.
Titanium Backup has stopped working. Shows the error "not enough space" when backing up to external sd card. Also, it shows that extsdcard is not writeable.
Here's the solution for i9505 to get it working, of course you need root to do that. It may work for other apps too and other phone models such i9500:
Edit file platform.xml in system/etc/permissions (make a backup first).
Search for this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
</permission>
Add this:
Code:
<permission name="android.permission.WRITE_EXTERNAL_STORAGE" >
<group gid="sdcard_r" />
<group gid="sdcard_rw" />
[COLOR="Green"][B]<group gid="media_rw" />[/B][/COLOR]
</permission>
Save changes and reboot.
Regards.
Click to expand...
Click to collapse
Hey thanks so much for the solution! Fixed my Umi Zero right up (now I can start tweaking , but I'm curious, how does this fix work? Thanks!
I am trying out CM 12.1 nightly on my Moto G 2014 (XT-1068) for the last 3 weeks. It has been surprisingly stable so far and a huge improvement over the stock 5.0.2 ROM provided by Motorola. Everything is working great on the latest nightly (Camera, Dual-SIM, etc) except for 2 issues which can be easily fixed. I am posting it so here so it may help someone who is looking for the solution.
GPS Does Not Work (Link to source)
GPS does not work after flashing the latest nightly. This issue seems to be present on most custom ROMs and can be fixed easily by running the following commands in fastboot mode:
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe reboot
Click to expand...
Click to collapse
Ubuntu Linux users can install the 'android-tools' package with the command 'sudo apt-get install android-tools' and use following commands in fastboot mode:
sudo fastboot erase modemst1
sudo fastboot erase modemst2
sudo fastboot reboot
Click to expand...
Click to collapse
This is a strange fix but works perfectly - the GPS locks in less than a second after rebooting the phone. You can test this using an app like "GPS Fix" which shows the time it takes for the phone to find GPS satellites. Apparently 'modemst1' and 'modemst2' are cache partitions which can be erased safely (at your own risk!)
Low Speaker Volume
Headphone volumes are pretty loud but speaker volumes are extremely low. I noticed this after one week of using the ROM when I put the phone on speaker mode while on a call. This can be fixed easily by editing the file '/system/etc/mixer_paths.xml' using ES File Explorer in root mode.
Find the section:
<path name="handset">
Click to expand...
Click to collapse
Change the following lines:
<ctl name="EAR PA Gain" value="POS_0_DB" />
Click to expand...
Click to collapse
To:
<ctl name="EAR PA Gain" value="POS_6_DB" />
Click to expand...
Click to collapse
Find the section:
<path name="speaker-and-headphones">
Click to expand...
Click to collapse
Add the following lines to the bottom of the section:
<ctl name="LINEOUT1 Volume" value="14" />
<ctl name="LINEOUT2 Volume" value="14" />
Click to expand...
Click to collapse
Save the changes and reboot the phone. This will give the same loudness levels as the stock ROM.
(Optional) To increase the volume even higher than stock ROM make the change given below (It will cause some distortion at high volume levels)
Find the section:
<path name="voice-speaker">
Click to expand...
Click to collapse
Change the following lines below it:
<ctl name="LINEOUT1 Volume" value="14" />
<ctl name="LINEOUT2 Volume" value="14" />
Click to expand...
Click to collapse
To:
<ctl name="LINEOUT1 Volume" value="20" />
<ctl name="LINEOUT2 Volume" value="20" />
Click to expand...
Click to collapse
Save the changes and reboot the phone.
Download CyanogenMod Nightly for MotoG 2014 (titan)
CyanogenMod Changelogs
Nice work, you could add the whatsapp voice fix to this
Here's how to enable miracast support
ansgp said:
Method described below worked for me, no flashing is required (am on kitkat 4.4.4)
step1: root your phone, u need to edit build.prop file (device\system\build.prop) (most probably you are already rooted )
step2: edit build.prop, use any editor like ES note editor inside ES, just add this line to it, persist.debug.wfd.enable=1
(i added it below, wfd segment persist.sys.wfd.virtual=0 in build.prop, i dont know if sequence matters)
step3: start wifi and go to->options->wifidirect->make it visible->add your device/pair it
step4: go to->settings->display->castscreen->options->enable wifi display (This option is disabled before we edit build.prop in step2)
Your TV should be listed over there, just select and connect it (accept the request to disconnect WiFi and connect to Direct device). Soon,TV will show "Miracast Signal Detection" and your device screen will be mirrored.
(FYI i have LG LA 6200, i mirrored over there)
(i used this link: http://forum.xda-developers.com/showpost.php?p=48659781&postcount=19 )
Click to expand...
Click to collapse
Source: http://forum.xda-developers.com/mot...racast-wireless-display-t2989167/post58412074
Flashed cm 12.1 nightly 29 last nite.very stable ROM it seems...minor bloats like media volume can't be changed from notification bar and Led light can't be changed.
Sent from my Moto G 2014 using XDA Free mobile app
Hi All I am using Lenovo K6 Power .
Last wee I unlocked boot loader and installed Lineage OS 15.1 after that I am facing low in call volume problem (volume is very low from speakers while in call even if its set to higher)
so to solve this problem again I flashed device with Stock ROM provided here but still I am facing same issue.
I tried method given in this video ( https://www.youtube.com/watch?v=_h14mrM7kxY )also but didn't worked.
Please help me urgent. :crying: :crying:
Any one having low in call volume issue?, What you did to solve it?
shyamk128 said:
Any one having low in call volume issue?, What you did to solve it?
Click to expand...
Click to collapse
You will have to root your K6 Power,download ES File Explorer from Google play
navigate to folder /vendor/etc/ ,it is in the main directory of the phone
Find mixer_paths.xml file ,and hold your finger on it,then choose open with ES Text Editor
When the file opens Look for the line:
<path name="handset">
it will be around line 894 or so
and in the following section
<ctl name="RX1 Digital Volume" value="84" />
And change numeric value to something higher.
Do not use value above 99!
I was using value=95,it was perfect for me,when you change the value,save and exit,restart the phone and do a call.
I was using Lineage around 3 months ,it was perfect.But everybody complained about an incall echo. I hope you don't have echo issues.
I am using Lenovo k53a48(K6 Note) ,this fix is for all Lenovo K6 users,tested and it worked 100% on any model.
If it doesnt work,go to the official thread of lineage 15.1 in xda and read the comments,i have answered the same queation about 20 times.So good luck!
P.S. Do not go in System or sys folder like in the video! just go to Vendor folder,then /etc and find mixer_paths.xml
nikoman1987 said:
You will have to root your K6 Power,download ES File Explorer from Google play
navigate to folder /vendor/etc/ ,it is in the main directory of the phone
Find mixer_paths.xml file ,and hold your finger on it,then choose open with ES Text Editor
When the file opens Look for the line:
<path name="handset">
it will be around line 894 or so
and in the following section
<ctl name="RX1 Digital Volume" value="84" />
And change numeric value to something higher.
Do not use value above 99!
I was using value=95,it was perfect for me,when you change the value,save and exit,restart the phone and do a call.
I was using Lineage around 3 months ,it was perfect.But everybody complained about an incall echo. I hope you don't have echo issues.
I am using Lenovo k53a48(K6 Note) ,this fix is for all Lenovo K6 users,tested and it worked 100% on any model.
If it doesnt work,go to the official thread of lineage 15.1 in xda and read the comments,i have answered the same queation about 20 times.So good luck!
P.S. Do not go in System or sys folder like in the video! just go to Vendor folder,then /etc and find mixer_paths.xml
Click to expand...
Click to collapse
Hi bro can you please give me exact path of file mixer_paths.xml
shyamk128 said:
Hi bro can you please give me exact path of file mixer_paths.xml
Click to expand...
Click to collapse
root/vendor
It is right beneath system.
nikoman1987 said:
root/vendor
It is right beneath system.
Click to expand...
Click to collapse
I m using stock ROM as of now and its missing that file on path given by you bro
Sorry bro but it didn't worked for me, I again flashed lineage os 15.1 and then tried
shyamk128 said:
Sorry bro but it didn't worked for me, I again flashed lineage os 15.1 and then tried
Click to expand...
Click to collapse
Are you rooted? And have you saved and exit the file?
I have done this at least 15 times,worked every time,only echo issues before and after that.The echo is not related with these changes
nikoman1987 said:
Are you rooted? And have you saved and exit the file?
I have done this at least 15 times,worked every time,only echo issues before and after that.The echo is not related with these changes
Click to expand...
Click to collapse
Yes bro.
Now volume is too low , i doubt whether it is problem of that speaker or what
One more thing have anyone facing heating issues with this device?
shyamk128 said:
Yes bro.
Now volume is too low , i doubt whether it is problem of that speaker or what
Click to expand...
Click to collapse
Nope,not device problem,change the value to 99(from 84 to 99)
---------- Post added at 18:31 ---------- Previous post was at 17:43 ----------
shyamk128 said:
I m using stock ROM as of now and its missing that file on path given by you bro
Click to expand...
Click to collapse
stock rom is not lineage rom,in stock rom,the mixer_paths file is in root/system/etc . There will be no difference if you copy the original mixer paths,i have already tried to fix that too.This fix works only on lineage 15.1 rom,because the incall low volume is lineage related problem.
nikoman1987 said:
Nope,not device problem,change the value to 99(from 84 to 99)
---------- Post added at 18:31 ---------- Previous post was at 17:43 ----------
stock rom is not lineage rom,in stock rom,the mixer_paths file is in root/system/etc . There will be no difference if you copy the original mixer paths,i have already tried to fix that too.This fix works only on lineage 15.1 rom,because the incall low volume is lineage related problem.
Click to expand...
Click to collapse
Ok i tried with 95 value, will chk with 99 also .
I did this and it worked: https://forum.xda-developers.com/k5-plus/themes/low-mic-volume-fix-a6020-t3640890
I use Lenovo K6 Karate (K33B36) - AEX 4.6
Lenovo k6 power mixer paths.XML missing
Hii my name rohit,today I am flash aicp custom ROM but my phone sound issue in earphone .Immediately I open Es file explorer and saw him /,etc, mixer paths.XML missing in etc folder
follow