Nexus 4 Cyanogen Mod: Broken screen with lock screen - Nexus 4 Q&A, Help & Troubleshooting

Hey everyone!
Just a few days after ordering a different phone which should get here tomorrow, I managed to drop my N4 and shatter the screen. The screen 'works' but the digitizer's broken below the crack so I can't get past the lock screen. I'm running Cyanogen mod and I honestly just want to get a few files off and update a few things onto drive so I can move to my new phone.
I was really hoping USB OTG would work, but I tried an external mouse with the right cable and the cursor wasn't showing up.
I don't think I have debugging mode enabled unless it carries forward if you update cyanogen. I do have CWM recovery 6.0.5.1. I tried mounting the drives through this, but it sadly didn't show up.
Is there any way I can enable USB OTG or get the files off without replacing the screen assembly? I tried using ADK Studio but I couldn't even get the command prompt open... If anyone has a link to a good walkthrough for this or suggestions for what I can do I'd be really grateful. Is there any way to force the USB OTG driver onto the phone? If I can use a USB keyboard/mouse combo to get everything off that would be the simplest way I think. Or if there's some way to get into the phone and have the display show up through my monitor, then that'd be great too.
Thanks a lot. I really appreciate any help.

You could try flashing twrp in place of cwm to mount the data partition.

audit13 said:
You could try flashing twrp in place of cwm to mount the data partition.
Click to expand...
Click to collapse
I can hit mount and unmount through CWM but nothing seems to happen. Nexus shows up as an empty device.
How would i flash TWRP at this point? Is there a way to push a zip into the phone if I can't get into it?

ridethecliche247 said:
I can hit mount and unmount through CWM but nothing seems to happen. Nexus shows up as an empty device.
How would i flash TWRP at this point? Is there a way to push a zip into the phone if I can't get into it?
Click to expand...
Click to collapse
If your physical buttons work then simply boot into fastboot by holding volume down and power and flash a TWRP recovery via fastboot. I've never had luck with CWM when it comes to reading files. TWRP opens up Android File Transfer right away on my Macbook when I connect it (Should do the same for Windows, not sure what OS you use)

fireball0093 said:
If your physical buttons work then simply boot into fastboot by holding volume down and power and flash a TWRP recovery via fastboot. I've never had luck with CWM when it comes to reading files. TWRP opens up Android File Transfer right away on my Macbook when I connect it (Should do the same for Windows, not sure what OS you use)
Click to expand...
Click to collapse
This seems promising, but how would I get it in via fastboot? Sorry I've never used fastboot before, but use the power+vol down command pretty often.
Would that also allow me to flash in the zip for USB otg once I'm in?

ridethecliche247 said:
This seems promising, but how would I get it in via fastboot? Sorry I've never used fastboot before, but use the power+vol down command pretty often.
Would that also allow me to flash in the zip for USB otg once I'm in?
Click to expand...
Click to collapse
Ok, you will want to be on your computer to do this. Download the latest TWRP recovery, which is here, you'll want to download the twrp-3.0.0-0-mako.img at the top of the list. You'll then have to open up fastboot in terminal/command prompt, and when you boot into your bootloader by holding volume down+power, connect your N4 and first I would type fastboot devices to make sure that your computer is recognizing that it's attached. Next type fastboot flash recovery twrp-3.0.0-0-mako.img and afterwards use the volume buttons to navigate and reboot to recovery. From there see if it connects to your computer and you can view files and if not, move forward with the USB otg. I have no experience with USB otg so I can't help you there, but hopefully this helps out at the very least!

fireball0093 said:
Ok, you will want to be on your computer to do this. Download the latest TWRP recovery, which is here, you'll want to download the twrp-3.0.0-0-mako.img at the top of the list. You'll then have to open up fastboot in terminal/command prompt, and when you boot into your bootloader by holding volume down+power, connect your N4 and first I would type fastboot devices to make sure that your computer is recognizing that it's attached. Next type fastboot flash recovery twrp-3.0.0-0-mako.img and afterwards use the volume buttons to navigate and reboot to recovery. From there see if it connects to your computer and you can view files and if not, move forward with the USB otg. I have no experience with USB otg so I can't help you there, but hopefully this helps out at the very least!
Click to expand...
Click to collapse
Ive had issues in the past trying to get the terminal to open. Do you have a link that could help?
Thanks so much!

ridethecliche247 said:
Ive had issues in the past trying to get the terminal to open. Do you have a link that could help?
Thanks so much!
Click to expand...
Click to collapse
Do you use Windows, Linux, or OS X?

fireball0093 said:
Do you use Windows, Linux, or OS X?
Click to expand...
Click to collapse
Windows.

ridethecliche247 said:
Windows.
Click to expand...
Click to collapse
Take a watch through this entire video, it's the most in depth one I can find that actually gives examples on things dealing with ADB and of course Fastboot. Make sure that the recovery .img is in the same directory that the fastboot prompts are in. If I didn't use OS X I'd walk you through it myself but I apologize there because I know the setup and way you enter commands is slightly different on Windows xD

Thank you! I'll give it a try!

ridethecliche247 said:
Thank you! I'll give it a try!
Click to expand...
Click to collapse
Just quick popping in to see how the progress is on it. Any luck at all?

fireball0093 said:
Just quick popping in to see how the progress is on it. Any luck at all?
Click to expand...
Click to collapse
I have finals next week so I was going to give it a try afterwards or if I get a study break. I'll definitely keep you posted on this thread though.
Thanks again!

Related

SOD and no root and unable to connect to a pc!

Ok so I was running taboonay 3.0d and I thought I'd have a go at Thor's rom. Flashed it wasn't really into it few things missing that I like in taboonay. So I then restored my back up. All hunky dory.
I then flashed a zip for scrillax v8 bootloader. It seemed to work fine, tablet boots up and rom running fine. I then tried to get to recovery and it's just not happening. Acer recovery says it cannot get root access. When I reboot I can get into the bootloader menu but none of the commands work. I can't get into the recovery menu at all no matter what I do. So then I figured I'd give Blackthund3r's root tool a go. Got everything ready on the pc including latest acer drivers. Now the tab isn't showing up on the pc either. I know some others have had similar problems but no solution was found in the other threads and considering that I probably screwed up badly somewhere along the way I thought I'd start this thread where you can all point out my ignorance and stupidity without bothering anyone else :silly:
Any help?
Any advice at all would be great, I have reinstalled drivers for tab but still no go! I'm on a old xp pro laptop. Everything else connects to the usb port and the cable is working fine
If you can't get to Recovery, you will need to reflash that.
But first thing is first. And that's the driver issue.
With the tab plugged into the PC, go to Device Manager, and see if it reflects there. If not, you will probably have to reload the drivers. You have a choice, which is the Acer Driver installation, or you can try the Google USB Android drivers. Generally I have had not much luck letting windows search the PC, so I usually install them manually. You can either;
a. Direct device manager to look in a specific folder for the google drivers, or;
b. In Device Manager, when you choose update drive, use "select from list" and see if the acer drivers show up there.
Generally, when you install the acer drivers, you should "right" mouse click the install file and select "run as administrator".
MD
Thanks md will give it another go
My device manager has no option for select from list or update drive, just scan for new hardware. Nothing shows up for acer.
irishmoe said:
Thanks md will give it another go
My device manager has no option for select from list or update drive, just scan for new hardware. Nothing shows up for acer.
Click to expand...
Click to collapse
Ok, now I run Win 7. But XP should be similar.
Are you saying in device manager, you do not have a device with an exclamation mark when you plug the tab in???
If you do, then right click the exclamation mark, select properties. Then the Tab "driver". Next, select "update driver". Then, "browse my computer for drivers". You should get the option to "select from a list".
If your PC does not detect the tablet at all when you plug it in, then it';s a different issue. It's what we call a USB Brick. At first guess. Usually easy to fix on the 500.
Can you start your tablet in APX mode? hold the pin reset, press and hold pwr. Count to 3, and release pwr, then 1 second later, release the pin reset. You should have a black screen with the pwr lite on.
I'm thinking you might want to do the manual flashing of the bootloader + 1.7.3 recovery. Obviously the bootloader V8 flashed, or it wouldn't work at all. Civato has instructions for manual flashing of the bootloader and recovery. Note that I HOPE you wrote down your UID number somewhere. As you will need to convert it to the SBK.
MD
EDIT. One more note. When you boot to the bootloader menu, in your case, probably the only option that will work is "fastboot mode". When you select it, the menu should go away, and it should say "fastboot mode". Then plug into PC and see if windows detects it in device manager. If so, you can fastboot a recovery image to it. Note, that for fastboot to work, you must have the Android SDK installed on your PC. Because you will have to run the fastboot commands from a command window. But for now, check to see if you get to fastboot mode on the tablet.
Sorry I can't spend a lot of time, as it';s late in moscow. Job tomorrow. But Skirlaz_CZ can give you the commands to fastboot a recovery in his bootloader thread.
Thanks MD I can get into fastboot mode so I'll try that one first. I didn't write and numbers down unfortunately. I was following a thread on tegraowners to install the bootloader which made no mention of making records( I'm a simpleton that needs to be led by the nose)
I appreciate your input
irishmoe said:
Thanks MD I can get into fastboot mode so I'll try that one first. I didn't write and numbers down unfortunately. I was following a thread on tegraowners to install the bootloader which made no mention of making records( I'm a simpleton that needs to be led by the nose)
I appreciate your input
Click to expand...
Click to collapse
Ouch! No UID numbers. That hurts. Look in your old CWM recovery backups (if you have) on your EXT SD Card. If you were at one time running a more recent version of CWM, You might have them in the recovery folders. The more recent recovery programs in the backup folders, it's called UID.txt. You have to have this if you use NVFlash. No way around that.
With Fastboot, you don't need it, as you will fastboot the recovery image. If successful, that should allow you to boot to recovery, and flash one of the custom roms. Make sure you do your wipes as in the Rom install instructions. I use CWM 1.7.3 (I've been too busy to try EZTerry's or the TWRP versions. But CWM works good so far.
If not, well, there;s always the update.zips to get a stock ICS on your tab.
Either way, we'll get you running, so don't worry. Just takes a little time between time zones, work, and family
MD
Moscow Desire said:
Either way, we'll get you running, so don't worry. Just takes a little time between time zones, work, and family
MD
Click to expand...
Click to collapse
You're not wrong there! I'm doing the whole ikea/home improvement thing with the family today. I'll try the fastboot later
Again I really appreciate the help.
Ok MD so the fastboot doesn't work at all. I installed adb using knives and forks and that couldn't pick up the tab for drivers installation. My head is wrecked! checking backups for numbers now
0x037c62074 and a few more got it
Edit: farkin idiot I just noticed the sdk requirement! Will install sdk and give fastboot another whirl
irishmoe said:
Ok MD so the fastboot doesn't work at all. I installed adb using knives and forks and that couldn't pick up the tab for drivers installation. My head is wrecked! checking backups for numbers now
0x037c62074 and a few more got it
Edit: farkin idiot I just noticed the sdk requirement! Will install sdk and give fastboot another whirl
Click to expand...
Click to collapse
HA HA! Yep, gotta have the SDK for ADB and Fastboot. I posted some instructions yesterday about flashing recovery via fastboot.
http://forum.xda-developers.com/showpost.php?p=29294671&postcount=6
You should be able to do it if you already have V8 Bootloader.
MD
Nice one MD going to try it out.
irishmoe said:
Thanks MD I can get into fastboot mode so I'll try that one first. I didn't write and numbers down unfortunately. I was following a thread on tegraowners to install the bootloader which made no mention of making records( I'm a simpleton that needs to be led by the nose)
I appreciate your input
Click to expand...
Click to collapse
I'll add that then - good idea
EDIT: It is done. And it is now foolproof. If you read that forum post now and STILL don't save your UID then I worry about you http://forum.tegraowners.com/viewtopic.php?f=30&t=388
irishmoe said:
Nice one MD going to try it out.
Click to expand...
Click to collapse
Waiting for an update
blackthund3r said:
I'll add that then - good idea
EDIT: It is done. And it is now foolproof. If you read that forum post now and STILL don't save your UID then I worry about you http://forum.tegraowners.com/viewtopic.php?f=30&t=388
Click to expand...
Click to collapse
Ha ha cheers mate! Like I said I'm a simpleton but not quite that bad.
Thanks for all the good work. I was actually following another thread stupidly when I should have been following yours.
MD - was away for a few days, just back but have had a few beers so not doing anything stupid tonight. Got sdk installed.
MD - Have you a link to download cwm 1.7.3 img? The download link in tegra won't work for me.
edit - nevermind I usedthe recovery skrillax suggested in his thread. Problem is the pc is not picking up the tab at all. Just says waiting for device
irishmoe said:
MD - Have you a link to download cwm 1.7.3 img? The download link in tegra won't work for me.
edit - nevermind I usedthe recovery skrillax suggested in his thread. Problem is the pc is not picking up the tab at all. Just says waiting for device
Click to expand...
Click to collapse
Sorry I was away. Did everything work ok for you? All running? (been trying to chase down my rom issue)
If it says "waiting for device", then you need to check your device manager, and make sure the correct driver is recognized. (APX, Fastboot, Recovery, Download, etc). Usually, I can change drivers while this is happening, and the process will complete.
MD
ok I don't mind admitting that I'm totally lost here. Nothing resembling the tab is showing up device manager so how can I check the drivers?I've been playing around with device manager for a while now and I can't find any way to do what you suggested
I've uninstalled and reinstalled the drivers again and again. Nothing! Could it have anything to do with me having a gateway? I wouldn't think so because they're the same inside.
Righto, no matter what I do the tab won't show up. Obviously can't check the drivers without the device showing up so I really am at a loss.
Even if I try the manual flash from civatos thread I will still come up with the same problem. No device no can do
irishmoe said:
Righto, no matter what I do the tab won't show up. Obviously can't check the drivers without the device showing up so I really am at a loss.
Even if I try the manual flash from civatos thread I will still come up with the same problem. No device no can do
Click to expand...
Click to collapse
be worth checking you still have usb debugging enabled m8
EDIT: The only other thing i can think of is to put yr tab in apx mode manually (press and hold reset button then press and hold power button, when the pwr lite comes on count 3 seconds and then release it, hold reset another second and then let that go) - you should have a black screen and power lite is on) now connect yr cable and see if the pc picks up the acer boot/recovery driver under usb controllers .
If these drivers install then I'd attempt a rollback to HC using an EUU, at least this method depends on yr pc not seeing yr tab. I'd only attempt this tho if the boot/recovery driver is installed and listed in dev. manager.
dibb_nz said:
be worth checking you still have usb debugging enabled m8
EDIT: The only other thing i can think of is to put yr tab in apx mode manually (press and hold reset button then press and hold power button, when the pwr lite comes on count 3 seconds and then release it, hold reset another second and then let that go) - you should have a black screen and power lite is on) now connect yr cable and see if the pc picks up the acer boot/recovery driver under usb controllers .
If these drivers install then I'd attempt a rollback to HC using an EUU, at least this method depends on yr pc not seeing yr tab. I'd only attempt this tho if the boot/recovery driver is installed and listed in dev. manager.
Click to expand...
Click to collapse
Ok ok boot/recovery driver? You've lost me there chap! Xp device manager is showing nothing tab related. Tell me what to do and I'll give it a blast.
I'm using the regular usb slot as opposed to the mini cause I've no mini cable. That should be ok right?

[Q]Bricked ?

This is what happens :
1. When I normally turn my N7 on , it goes throught the google logo and gets stuck on the ROM logo .
2. I can get into the bootloader when the USB is plugged off , but i cant get into recovery it just gets stuck on the google logo .
3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected . (if i get into the bootloader when the USB is allready connected it gets in the bootloader main screen but i cant move) .
So i cant flash , get into the rom or return to stock .
ANY IDEAS ?? please help me :crying::crying:
Bump
Definitely not bricked since of powers on. Fastboot flash the stock image and you should be good as new.
Sent from my Nexus 7 using Tapatalk 2
Strange, it shouldn't make a difference whether your USB is plugged or not when trying to get to the recovery.
If you get into the fast boot menu or "boot loader main screen" and you press the volume down button a few times you get no response? Sometimes it takes a few seconds for mine to switch to recovery,etc.
Also, what caused your tablet to get stuck in that state?
brGabriel said:
Strange, it shouldn't make a difference whether your USB is plugged or not when trying to get to the recovery.
If you get into the fast boot menu or "boot loader main screen" and you press the volume down button a few times you get no response? Sometimes it takes a few seconds for mine to switch to recovery,etc.
Also, what caused your tablet to get stuck in that state?
Click to expand...
Click to collapse
If I press the volum dowm bottom while on fast boot menu I can move around the menu if the usb is plugged off , but I can only shutdown or restart the fastboot since the start and recovery options just gets stuck on the google/rom logo if it is plugged in I just gets stuck in the menu and I cant even scroll . yea I waited about half an hour on the google logo trying to get to my recovery and nothing happened .
I JUST DONT KNOW WHAT I DID ! I really dont ! I am an experienced flahser and had been so for almost 2 years now ! I just left my N7 on the table and didnt touch it at all for a week and when I tried to turn it on after that I just got that prob . but I did nothing related to flashing or so - it just happened by staying at the table !
any help ?? PLEASE
I CANT RETURN TO STOCK , if i plugg in the usb fastboot gets stuck .
have you tried charging it on the wall charger to make sure the battery has got a full charge, don't know, just throwing out options
Hmmm, well at least you're able to boot the tablet and get to fastboot menu so its not a hard brick. Sounds like a corrupted partition of sorts if you can't get into ROM or recovery. Someone with more expertise might have a possible solution. I wouldn't lose hope yet.
yes , i did charged it to full batt .
i can get into fastboot but not rom or recovery and when i plugg in usb i have no fastboot , doesnt that mean i wont ever be able to flash ?
if i will make a vid of the prob it will help ?
Get to boot loader and do
fastboot flash recovery C:\File path to recovery on computer
Once you have a recovery installed you can push a ROM to your Nexus via adb.
Sent from my Nexus 7
Or you can always use wugfreshs toolkit and click flash back to stock option and check device won't boot, the same thing happened to me awhile ago and the bootloader problem is cause you have the old bootloader the knew 4.13 bootloader fixed that
Sent from my Nexus 7 using Tapatalk HD
i've had good luck with mskip's toolkit in a similar situation
veeman said:
Get to boot loader and do
fastboot flash recovery C:\File path to recovery on computer
Once you have a recovery installed you can push a ROM to your Nexus via adb.
Sent from my Nexus 7
Click to expand...
Click to collapse
xfrancis14 said:
Or you can always use wugfreshs toolkit and click flash back to stock option and check device won't boot, the same thing happened to me awhile ago and the bootloader problem is cause you have the old bootloader the knew 4.13 bootloader fixed that
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Guys , I told you that my bootloader gets stuck when I connect the usb - so how can I possibly flash anything ? please read the whole post
rkiller51 said:
Guys , I told you that my bootloader gets stuck when I connect the usb - so how can I possibly flash anything ? please read the whole post
Click to expand...
Click to collapse
It says you can get to the boot loader with the cable unplugged. So get to the boot loader and then plug in the USB.
Sent from my Nexus 7
Stop... MUFFIN TIME!!!
veeman said:
It says you can get to the boot loader with the cable unplugged. So get to the boot loader and then plug in the USB.
Sent from my Nexus 7
Stop... MUFFIN TIME!!!
Click to expand...
Click to collapse
Are you kidding ? "3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected ."
I really appreciate any kind of help, but why even write and answer when you didnt even fully read the question ?
rkiller51 said:
Are you kidding ? "3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected ."
I really appreciate any kind of help, but why even write and answer when you didnt even fully read the question ?
Click to expand...
Click to collapse
Lol just calm down man we're all just trying to help you!
Now, you need to get your N7 into the bootloader, it does not matter if you can't navigate the bootloader on your N7. Once in the bootloader, connect the N7 to your computer with the USB cable.
Once you're connected, make sure you've downloaded the Android SDK and open a command prompt. Navigate your command prompt (make sure you ran that command prompt as administrator) to the "platform-tools" directory.
Once in the platform-tools directory run the following command without quotes:
"fastboot devices"
It should return the serial number for your device, indicating that fastboot sees your N7 and can work with it.
After that type
"fastboot flash recovery *.img"
You'll need to head to clockworkmod.com to download the N7 recovery image. Place the downloaded image in the platform-tools directory and replace "*.img" with the filename of the recovery image you downloaded.
That's it! Unplug your N7 and go into recovery, and sideload whatever ROM you want!
Let us know how it goes!
PS: If fastboot devices shows nothing, we have a bigger problem...
TMan459 said:
Lol just calm down man we're all just trying to help you!
Now, you need to get your N7 into the bootloader, it does not matter if you can't navigate the bootloader on your N7. Once in the bootloader, connect the N7 to your computer with the USB cable.
Once you're connected, make sure you've downloaded the Android SDK and open a command prompt. Navigate your command prompt (make sure you ran that command prompt as administrator) to the "platform-tools" directory.
Once in the platform-tools directory run the following command without quotes:
"fastboot devices"
It should return the serial number for your device, indicating that fastboot sees your N7 and can work with it.
After that type
"fastboot flash recovery *.img"
You'll need to head to clockworkmod.com to download the N7 recovery image. Place the downloaded image in the platform-tools directory and replace "*.img" with the filename of the recovery image you downloaded.
That's it! Unplug your N7 and go into recovery, and sideload whatever ROM you want!
Let us know how it goes!
PS: If fastboot devices shows nothing, we have a bigger problem...
Click to expand...
Click to collapse
Its hard to be calm then you new N7 is dying :/
somthing like this ? (pic attached)
If i did everything like you said it means i do have the bigger prob help me!
OK. Next thing is to ensure your N7 is properly detected in Windows.
Just head to the device manager. You should see Original Android Interface or something along those lines.
Report back with a screenshot, those are very helpful!
TMan459 said:
OK. Next thing is to ensure your N7 is properly detected in Windows.
Just head to the device manager. You should see Original Android Interface or something along those lines.
Report back with a screenshot, those are very helpful!
Click to expand...
Click to collapse
Here you go (attached) ! you have everything you need mate ?
I really appreciate the help ! :good::good:
I had similar issues and was able to get back to stock using WugFresh's Nexus Root Toolkit. Highly recommended!
From the same command Window, in the same platform - tools directory, does adb devices show your device?
I'm not the lowest of the low, but I am the slowest of the slow.

Nexus 7 stuck on fastboot screen/bootloop...bricked?

Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
voodoochild2008 said:
Hi
Tried to flash a new kernel and all seemed ok (flashed phones and nexus 7 few times now) when I came out of flashing I hit a bootloop, I though nothing of it and tried to restart....same issue, so next I tried to go into cw recovery, no joy, it will not show again.
I can power/vol keys to android fastboot screen with start power restart boot and so on but if I choose recovery nothing happens, I am stuck with either a bootloop or stuck on android fastboot screen and not able to move from either.
I have tried the toolkit and most other things but the problem is it cannot see my nexus 7, even after installing drivers and so on the toolkit (top right) does not list my nexus as found, because of this I cannot reflash any stock firmware/recover/reflash cwr.
Not sure how I can get around this if my pc cannot see the nexus 7.
Thanks for any help
Click to expand...
Click to collapse
try to flash recovery again via fastboot...or doesnt pc recognize divice at all?
S.R
shivasrage said:
try to flash recovery again via fastboot...
S.R
Click to expand...
Click to collapse
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
voodoochild2008 said:
Hi
I cannot flash anything. On the fastboot screen I can scroll up and down powr off/start/recovery....if I choose any (apart from power off) nothing happens.
When I hook it up to my pc it cannot see it, nexus 7 toolkit also cannot see it, it does not list it as found so I cannot flash anything on to it, if I try it just says waiting for device, tried other things and same thing either waiting for device or asks if fastboot installed.
Click to expand...
Click to collapse
f****
have you tried flashing factory image from google site.with flash all-sh?
shivasrage said:
f****
have you tried flashing factory image from google site.with flash all-sh?
Click to expand...
Click to collapse
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
voodoochild2008 said:
I have a image ready but not able to flash....but what is flash all-sh? trying to search for it, is it a tool to force flash?
Click to expand...
Click to collapse
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
shivasrage said:
no its included in the factory image to flash all i one so it looks like for the nexus 4:
flash-all .....its a windows batch image with all included.... try this
S:R.
Click to expand...
Click to collapse
Thanks....but still get waiting for device, thats the problem, nothing seems to see it so I cannot flash anything to it.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
i thought the same as you but fastboot isn recognizig N7 anymore....always wating for device....
Hemidroids said:
You are already at the bootloader screen. Use your computer to fastboot flash a new kernel. Being able to get into recovery has nothing to do with it. You screwed it up flashing a kernel. Its likely thats all you need to fix it. Flash a new one with fastboot.
Click to expand...
Click to collapse
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
[/COLOR]
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
voodoochild2008 said:
Downloaded the fastboot exe but unsure what it needs to work as when I click on it a run box opens for like half a second and then closes, dont get a chance to read what it says, think I will have to read up on it.
Click to expand...
Click to collapse
EXE? doh.......Windows.......sorry cant help.
shivasrage said:
[/COLOR]
read this... i hope you can follwow that easily like me...
greets S.R.
http://dottech.org/21534/how-to-ins...ows-computer-for-use-with-your-android-phone/
Click to expand...
Click to collapse
Tried some of that already but will try again tomorrow.
Thanks for help with this and will post tomorrow if I can sort it. cheers
I hope this instructions can help you a little bit...but if it fails don´t be angry its all I can think of ...at this time ....merry christmas
S.R.
http://forum.xda-developers.com/showthread.php?p=31931117:D
Sent from my Nexus 7 using xda premium
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
voodoochild2008 said:
Well after using bits of jrom flasher and nexus toolkit I got it working again, main issue was making the tablet seen, abd and fastboot would not show device.
All up and running again THANKS TO ALL WHO HELPED
Click to expand...
Click to collapse
How did you get it to work? I have problem getting my device to be recognized. Stuck on boot loop too..
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Quacker245 said:
Hey man, how did you get your computer to recognize your device? Would be great to finally fix mine as this is the same exact problem -- computer doesn't recognize it even though in fastboot.
Click to expand...
Click to collapse
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
brainvision said:
I don't understand exactly what you are trying to do, sorry: you said the pc does not see the nexus, "even thought in fastboot".. If you say even thought, it seems to me that you are able to access Android itself or maybe recovery? In that case I can't see the issue.. Sorry my fault, non english mother tongue
But, if have the device soft bricked and you are able to enter ONLY the bootloader (that is what we call often fastboot), then you should start to remove the not working fastboot drivers installed into your PC: launch the nexus in fastboot mode, go to Device Manager into your PC and search for a driver with an yellow exclamation point. This issue is very common so I hope that you have it, too.. So, uninstall that driver, then unlink the nexus from your PC; after a few seconds attach it to another USB port and see if Windows install a driver (it should). If this new driver doesn't work, too, or if Windows does no install any, try this one: http://forum.xda-developers.com/showthread.php?t=1426502
Hope it helps, let us know, see you!
EDIT: also, if you still have no luck, you should find a Linux or Mac PC/laptop and download the adb/fastboot binary files for that OS; this will definitively solve your driver issue ( @#ò#@!"@# Winzozz )
Click to expand...
Click to collapse
Hi sorry for not being clear. Basically I am only allowed to access the bootloader and my device is soft-bricked. I'm pretty sure I tried uninstalling and reinstalling the drivers about a year ago when I originally did it, but I'll try again and let you know. Thanks!

N10 Totally Bricked;( Need help please..

Hi all,
Totally new to android and just recieved my new n10 yesterday.
I tried to root it and have got stuck at the google writing at the start. The computer is no longer regonising my device so i cant adb or odin to it, im pretty much stuck now and need your expert help
thanks,
steve
https://developers.google.com/android/nexus/images#instructions
Download factory image, extract the folder. Copy fastboot.exe and AdbWinApi.dll to the extracted folder. Connect your Nexus 10 and boot it into fastboot by holding down all buttons at the same time for a few seconds. Then double click the "flash-all.bat script.
Just tried that and just get <waiting for device>
I dont seem to have any connection with the pc anymore;/
Steve
technocra said:
Just tried that and just get <waiting for device>
I dont seem to have any connection with the pc anymore;/
Steve
Click to expand...
Click to collapse
If the N10 can go into fastboot, it's fixable
You probably just have to reinstall the ADB drivers. If you've used a toolkit... I would get rid of it and get the latest USB drivers from Android SDK (version 7). You'll also likely have to uninstall any driver relating to ADB from Device Manager.
technocra said:
Just tried that and just get <waiting for device>
I dont seem to have any connection with the pc anymore;/
Steve
Click to expand...
Click to collapse
I have a Android 1.0 in device manager
espionage724 said:
If the N10 can go into fastboot, it's fixable
You probably just have to reinstall the ADB drivers. If you've used a toolkit... I would get rid of it and get the latest USB drivers from Android SDK (version 7). You'll also likely have to uninstall any driver relating to ADB from Device Manager.
Click to expand...
Click to collapse
Ok android 1.0 has now become android bootloader interface but it still will not fastboot from recovery it just says waiting for device;/
Cheers,
Steve
technocra said:
Ok android 1.0 has now become android bootloader interface but it still will not fastboot from recovery it just says waiting for device;/
Cheers,
Steve
Click to expand...
Click to collapse
Make sure you're actually in the right bootloader.. BOTH volume buttons have to be held down while powering on. You know you're in the right one if you can hit volume up and down and switch between "Start/Recovery/Bootloader".. If your only option is "start" and nothing else you didn't do it right.
styckx said:
Make sure you're actually in the right bootloader.. BOTH volume buttons have to be held down while powering on. You know you're in the right one if you can hit volume up and down and switch between "Start/Recovery/Bootloader".. If your only option is "start" and nothing else you didn't do it right.
Click to expand...
Click to collapse
Yes
I managed to finally restore with a toolkit with the option of if it was soft bricked
I wanna thank all you guys for your help, I dont think I will root now until i get to grasps more with the deeper concepts of Android
Cheers
Steve

[Q] nexus 4 Any way to copy data (broken touch input - physical buttons work fine)

Dropped my nexus 4 yesterday and it fell right on the edge of the screen shattering it. First time I've broken a phone, and this one seems like a particularly bad one to have broken - no reasonable price screen replacement with the screen attached to the digitizer.
Anyway the phone boots up and charges fine, but I can't unlock it, which means my computer isn't connecting to it. Is there any way I can save all of my photos and other files?
Is USB debugging enabled?
Sent using xda-developers app
Chromium_ said:
Is USB debugging enabled?
Sent using xda-developers app
Click to expand...
Click to collapse
I believe so. But I have no way to check.
foofiebeast said:
I believe so. But I have no way to check.
Click to expand...
Click to collapse
To be clear, I can't check because I can't get past the lock screen. I also have no way of turning the phone off, I just have to wait until the battery runs out and then I have one chance to turn it on. I'm wondering if there is anything I can do in recovery mode that might help?
foofiebeast said:
To be clear, I can't check because I can't get past the lock screen. I also have no way of turning the phone off, I just have to wait until the battery runs out and then I have one chance to turn it on. I'm wondering if there is anything I can do in recovery mode that might help?
Click to expand...
Click to collapse
Setup adb http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/
Plug the phone in while its at the lockscreen, and run "adb devices". If the command returns the serial number of the phone let me know and I'll give you further guidance. If it doesn't it'll take a bit more work but we should still be able to get it done.
Sent using xda-developers app
Chromium_ said:
Setup adb http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/
Plug the phone in while its at the lockscreen, and run "adb devices". If the command returns the serial number of the phone let me know and I'll give you further guidance. If it doesn't it'll take a bit more work but we should still be able to get it done.
Sent using xda-developers app
Click to expand...
Click to collapse
Thanks mucho, I will try to get that set up now.
Set it up, but no devices listed
It's frustrating because it's so tantalizingly close. I have a pretty good idea that when I send it in to LG they are probably just going to send a different refurb back. I find it hard to believe that they do a 1 to 1 repair job on each phone that comes in.
foofiebeast said:
Set it up, but no devices listed
Click to expand...
Click to collapse
Alright. This is what you'll need to do: unlock the bootloader, flash cwm recovery, boot into cwm, use adb to copy the contents of your SD card to your PC.
Read this guide http://forum.xda-developers.com/showthread.php?t=2266654 . only follow the parts to unlock the boot loader and flash clockworkmod custom recovery. Make sure that you flash the recovery right after unlocking (without rebooting in between) otherwise data will get wiped. )
After that boot into your newly flashed recovery and use "adb pull /data/media/" . this should copy everything on the internal sdcard of the phone.
Sent using xda-developers app
Search for how to unlock the bootloader without wiping all your data. Would be moot otherwise...
Of course if all that's been done in the past and you already have cwm/twrp, just boot to that and you'll be able to adb in.
Also, you can hold onto the power button for 10s to force it to power down.
EDIT: restarted and tried again, making some progress now.
foofiebeast said:
Doesn't work because I can't enable usb debugging.
Click to expand...
Click to collapse
Again, that's why we go into cwm/twrp. Insecure debugging is enabled there.
Awesome, it appears to be copying everything over now!
Can't thank you enough! Just saved a years worth of pictures and videos, that pretty much chronicle the start of my current relationship up to the present.
Of course right now it is just pulling all of the EA real racing data, but I assume it will eventually get to the pictures, haha.
Chromium_ said:
Alright. This is what you'll need to do: unlock the bootloader, flash cwm recovery, boot into cwm, use adb to copy the contents of your SD card to your PC.
Read this guide http://forum.xda-developers.com/showthread.php?t=2266654 . only follow the parts to unlock the boot loader and flash clockworkmod custom recovery. Make sure that you flash the recovery right after unlocking (without rebooting in between) otherwise data will get wiped. )
After that boot into your newly flashed recovery and use "adb pull /data/media/" . this should copy everything on the internal sdcard of the phone.
Sent using xda-developers app
Click to expand...
Click to collapse
hey umm is there a way to get my contacts from the phone as well my phone is in the same situation thank you in advance
likidd said:
hey umm is there a way to get my contacts from the phone as well my phone is in the same situation thank you in advance
Click to expand...
Click to collapse
Make a nandroid backup in cwm, copy the backup to pc, then to another rooted phone, and use Nandroid Manager app to restore contacts
Sent from my Nexus 4 using Tapatalk 4
hackergnome said:
Make a nandroid backup in cwm, copy the backup to pc, then to another rooted phone, and use Nandroid Manager app to restore contacts
Sent from my Nexus 4 using Tapatalk 4
thank you but how exactly do you do that
Click to expand...
Click to collapse
likidd said:
hey umm is there a way to get my contacts from the phone as well my phone is in the same situation thank you in advance
Click to expand...
Click to collapse
you don't save as google contacts?
Hi guys, sorry to hijack a thread but i have followed the instructions above as have same issue; broken screen, no usb debugging, completely stock nexus 4. Have managed to install adb, got it working in cmd. I ran bootloader, unlocked it, DIDN'T REBOOT, just flashed my custome recovery CWM 6.0.3.6 and booted it. So now i am inside the recovery but i can't pull my media???
Any help would be greatly appreciated
Thanks
TMc1908
TMc1908 said:
Hi guys, sorry to hijack a thread but i have followed the instructions above as have same issue; broken screen, no usb debugging, completely stock nexus 4. Have managed to install adb, got it working in cmd. I ran bootloader, unlocked it, DIDN'T REBOOT, just flashed my custome recovery CWM 6.0.3.6 and booted it. So now i am inside the recovery but i can't pull my media???
Any help would be greatly appreciated
Thanks
TMc1908
Click to expand...
Click to collapse
You need to be more specific for us to help you. What do you mean by "i can't pull my media" ?
Chromium_ said:
You need to be more specific for us to help you. What do you mean by "i can't pull my media" ?
Click to expand...
Click to collapse
Apologies, i was a bit rushed. So i'm trying to get all my pics/data off my phone as my screen is smashed and i had a pattern lock on. My phone did not have usb debugging enabled. So i unlocked the bootloader, didn't do a reboot, flashed a custom recovery and then entered the recovery. However, my device isn't recognised in windows once i enter recovery and as such when i run "adb devices" no device is listed.
In the original instructions, it says:
After that boot into your newly flashed recovery and use "adb pull /data/media/" . this should copy everything on the internal sdcard of the phone
So how come once I load my recovery, when in cmd prompt, "adb pull /data/media" doesn't seem to work?
I'll be honest, i'm a little lost at this point and just really don't want to lose all my pics and thought i could get them this way before sending my phone for repair/replacement (it is insured)
Thanks for your help
TMc1908
TMc1908 said:
Apologies, i was a bit rushed. So i'm trying to get all my pics/data off my phone as my screen is smashed and i had a pattern lock on. My phone did not have usb debugging enabled. So i unlocked the bootloader, didn't do a reboot, flashed a custom recovery and then entered the recovery. However, my device isn't recognised in windows once i enter recovery and as such when i run "adb devices" no device is listed.
In the original instructions, it says:
After that boot into your newly flashed recovery and use "adb pull /data/media/" . this should copy everything on the internal sdcard of the phone
So how come once I load my recovery, when in cmd prompt, "adb pull /data/media" doesn't seem to work?
I'll be honest, i'm a little lost at this point and just really don't want to lose all my pics and thought i could get them this way before sending my phone for repair/replacement (it is insured)
Thanks for your help
TMc1908
Click to expand...
Click to collapse
Before you can run the adb pull command, you'll need to get your phone recognized by "adb devices". Try installing Koush's adb driver.

Categories

Resources