BB Knowledge Base article: http://support.blackberry.com/kb/articleDetail?articleNumber=000038083&language=English
So, BlackBerry have finally decided to put out autoloaders for the Priv; factory images, plus a fastboot executable and the necessary .bat/.sh files to load the images.
The list so far:
AT&T
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-na-att-AAD447.zip -- AAD447 (February update)
T-MOBILE USA
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-na-tmo-AAD442.zip -- AAD442 (February update)
VERIZON
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-vzw-vzw-AAD797.zip -- AAD797 (Launch)
THE REST (i.e. not AT&T, T-Mobile or Verizon)
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-common-AAD250.zip -- AAD250 (January update)
thurask said:
BB Knowledge Base article: http://support.blackberry.com/kb/articleDetail?articleNumber=000038083&language=English
So, BlackBerry have finally decided to put out autoloaders for the Priv; factory images, plus a fastboot executable and the necessary .bat/.sh files to load the images.
The list so far:
AT&T
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-na-att-AAD447.zip -- AAD447 (February update)
T-MOBILE USA
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-na-tmo-AAD442.zip -- AAD442 (February update)
VERIZON
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-vzw-vzw-AAD797.zip -- AAD797 (Launch)
THE REST (i.e. not AT&T, T-Mobile or Verizon)
https://bbapps.download.blackberry.com/Priv/bbry_qc8992_autoloader_user-common-AAD250.zip -- AAD250 (January update)
Click to expand...
Click to collapse
So if I have a factory unlocked PRIV, will I be able to load T-Mobile's version and get update as T-Mobile branded PRIV?
Charkatak said:
So if I have a factory unlocked PRIV, will I be able to load T-Mobile's version and get update as T-Mobile branded PRIV?
Click to expand...
Click to collapse
In the flash batch script, the first line checks the variant. Considering the Priv only takes signed images, I wouldn't try bypassing that unless you want a brick.
ToniCipriani said:
In the flash batch script, the first line checks the variant. Considering the Priv only takes signed images, I wouldn't try bypassing that unless you want a brick.
Click to expand...
Click to collapse
It does make sense. Isn't that all STV100-1 models are the same?
Charkatak said:
It does make sense. Isn't that all STV100-1 models are the same?
Click to expand...
Click to collapse
Thanks to the obsession of US carriers to make sure they load your phones up with crap to trap you into paying more, no they aren't.
Here's a list:
http://forums.crackberry.com/news-r...umbers-names-828586/index43.html#post12099923
ToniCipriani said:
Thanks to the obsession of US carriers to make sure they load your phones up with crap to trap you into paying more, no they aren't.
Here's a list:
http://forums.crackberry.com/news-r...umbers-names-828586/index43.html#post12099923
Click to expand...
Click to collapse
Just saw your message. Looked at the chart in the above link and see that oem name, svnumber are different for PRIVs. So if flash script checks the phone to see if it matches, then it won't allow flashing of the wrong image, unless user purposely modifies the file.
Can somebody give me the Settings app?
Related
I've had my 6P on Sprint since i bought it and always updated monthly via fastboot flash. I just switched to Verizon and im using Jan 2017 factory image...same as when i was on sprint. Everything works. Now there are new factory images for Feb 2017, 1 for Verizon only and 1 for the rest of the phones. My question is, what's the difference with the Verizon only image? Am i losing some features because i'm not on the Verizon only update? Also, if i do flash the Verizon only update, can i flash non-Verizon update down the line?
Thanks. Phone works fine without the Verizon only update....so i'm a little hesitant to flash Verizon only unless there is some real benefit.
Hi... Verizon only version contains a different radio.img. That's all I'm aware off. Verizon users should confirm
sandrshe said:
I've had my 6P on Sprint since i bought it and always updated monthly via fastboot flash. I just switched to Verizon and im using Jan 2017 factory image...same as when i was on sprint. Everything works. Now there are new factory images for Feb 2017, 1 for Verizon only and 1 for the rest of the phones. My question is, what's the difference with the Verizon only image? Am i losing some features because i'm not on the Verizon only update? Also, if i do flash the Verizon only update, can i flash non-Verizon update down the line?
Thanks. Phone works fine without the Verizon only update....so i'm a little hesitant to flash Verizon only unless there is some real benefit.
Click to expand...
Click to collapse
5.1 said:
Hi... Verizon only version contains a different radio.img. That's all I'm aware off. Verizon users should confirm
Click to expand...
Click to collapse
I believe this is accurate. While I haven't tried it, I am on Verizon and flashed the "all except Verizon" build when it first came out (because I was impatient and didn't want to wait )...everything worked perfectly, until I realized when I called other VZW cell phones I couldn't reach their voicemail - calls would just terminate after 4 rings or whatever.
The resolution to this was simply reverting back to an older radio, and then everything worked flawlessly. Pretty obvious that something with Verizon's system didn't like the radio that they used in that build - so makes complete sense that that's the only difference.
The only difference is that the Verizon build contains a different radio.img. The older radio in the build for all has problems with Verizon's voicemail system. If you flash the Verizon one and you don't like it you can always go back to the other build or even easier just flash the radio from the build for all in fastboot.
sandrshe said:
I've had my 6P on Sprint since i bought it and always updated monthly via fastboot flash. I just switched to Verizon and im using Jan 2017 factory image...same as when i was on sprint. Everything works. Now there are new factory images for Feb 2017, 1 for Verizon only and 1 for the rest of the phones. My question is, what's the difference with the Verizon only image? Am i losing some features because i'm not on the Verizon only update? Also, if i do flash the Verizon only update, can i flash non-Verizon update down the line? Thanks. Phone works fine without the Verizon only update....so i'm a little hesitant to flash Verizon only unless there is some real benefit.
Click to expand...
Click to collapse
First of all, the February update NUF26K brings many security fixes, in addition to the different baseband (v03.79)mentioned earlier that has Verizon carrier specific fixes. You should flash it for both these reasons.
does verizon lock your 6p into their system--their style..........
Without AT&T's help?
No, you can contact AT&T, https://www.att.com/deviceunlock
Yes you can. I've done it with a site called unlockplus.
Here you go. Flash one of these KDZ to carrier unlock the phone. You want the ones that say "open" -- which means they are not locked to a carrier.
https://lg-firmwares.com/lg-lmv350ulm-firmwares/firmwares/
https://lg-firmwares.com/lg-lmv350em-firmwares/firmwares/
Top link is for North America Google Fi variant.
Bottom link is for Central/South America -- but if you use that, you do NOT want Claro. You want the other one (carrier unlocked) MIA.
Yeah, flashing an unlocked firmware won't unlock this device. Why in the world would you post something ridiculous like this? How can you have 8185 posts and not know what unlocking means? smh
zeek6228 said:
Yeah, flashing an unlocked firmware won't unlock this device. Why in the world would you post something ridiculous like this? How can you have 8185 posts and not know what unlocking means? smh
Click to expand...
Click to collapse
So your saying that wont work.. I was just about to figure out how to flash it. Good thing i didnt or i would have more than likely bricked it.
zeek6228 said:
Yeah, flashing an unlocked firmware won't unlock this device. Why in the world would you post something ridiculous like this? How can you have 8185 posts and not know what unlocking means? smh
Click to expand...
Click to collapse
Just so you know, you're replying to a guy who (besides other feats) made it possible for anyone to carrier unlock virtually any LG V30 model no matter what carrier it was on previously. And that was made exactly by crossflashing. So yeah, I would kinda listen to him.
zeek6228 said:
Yeah, flashing an unlocked firmware won't unlock this device. Why in the world would you post something ridiculous like this? How can you have 8185 posts and not know what unlocking means? smh
Click to expand...
Click to collapse
Because that's EXACTLY how we carrier unlock the LG V30/V30+. We flash carrier unlocked firmware over carrier locked firmware -- specifically AT&T and Sprint variants. The principle should be the same with the AT&T LG V35.
Besides the two carrier locked North American LG V30 phones (AT&T & Sprint), some of the European LG V30 are also carrier locked. Cross flashing the region appropriate "open market" firmware carrier unlocks them.
I haven't done it on LG V35, but I've done it many, many times on the predecessor LG V30/V30+.
We flash V30 firmware and forth at will to carrier unlock the phones, get fastboot flash commands, bootloader unlock, install TWRP and root. The simplest of all these goals is carrier unlock.
____________
MorbidMonkey101 said:
So your saying that wont work.. I was just about to figure out how to flash it. Good thing i didnt or i would have more than likely bricked it.
Click to expand...
Click to collapse
He says it won't work. Whereas I've carrier unlocked several LG V30/V30+ doing EXACTLY that. And so have hundreds of other people. I've written a couple of guides on the subject.
While I've not done it on LG V35, I suggested this method because it seems reasonable and logical based on the immediate V30 predecessor.
Something similar (cross flashing) also worked on the LG V20. However, in both cases we had Dev Patched LGUP to use. IF it doesn't work for the LG V35, that would be why -- because perhaps the appropriate .dll has not been used to create LG V35 dev patched LGUP.
I can't guarantee it will work on LG V35, the way I can guarantee it does for the LG V30.
lg V35
You can flash it and it will boot (not dead, frozen or stuck in Qualcomm 9008 mode like when you normally flash mismatched firmware, picks up signal fine)
Yes I am aware of how to unlock G6, V30 and G7 by flashing a different firmware and I have unlocked several HUNDRED of them. Even LS998 on V22B firmware.
This will flash successfully (I use Octopus tool, the newest LGUP tool is not released so can't do it that way) but it will still show the V350AWM model and will still be locked to AT&T. Only it will remove the AT&T bloatware.
It is a good solution to flash these if you brick your device. But it won't unlock them.
zeek6228 said:
You can flash it and it will boot (not dead, frozen or stuck in Qualcomm 9008 mode like when you normally flash mismatched firmware, picks up signal fine)
Yes I am aware of how to unlock G6, V30 and G7 by flashing a different firmware and I have unlocked several HUNDRED of them. Even LS998 on V22B firmware.
This will flash successfully (I use Octopus tool, the newest LGUP tool is not released so can't do it that way) but it will still show the V350AWM model and will still be locked to AT&T. Only it will remove the AT&T bloatware.
It is a good solution to flash these if you brick your device. But it won't unlock them.
Click to expand...
Click to collapse
1) Well debloating V35 is at least one advantage others will like, even if it won't carrier unlock it -- and this answer is much better than your first attempt. Can you also now access the bootloader on the V35 and do fastboot flash commands work when, once you flash the open market KDZ? Cross flashing carrier locked North America V30/V30+ to open market US998 allows this, besides carrier unlocking them.
2) If you are aware of how to to carrier unlock AT&T H931 V30 and Sprint LS998 V30/V30+ by flashing different firmware -- like to the US998 V30 open market KDZ -- as well as other LG phone series (G6/G7) using the same technique, and you say you have carrier unlocked "several hundred" by using that technique (with Octopus box, it seems), then your previous insulting post looks like it was written by someone totally ignorant of this Frankenstein process which we use every day to carrier unlock phones like this...
zeek6228 said:
Yeah, flashing an unlocked firmware won't unlock this device. Why in the world would you post something ridiculous like this? How can you have 8185 posts and not know what unlocking means? smh
Click to expand...
Click to collapse
zeek6228 said:
You can flash it and it will boot (not dead, frozen or stuck in Qualcomm 9008 mode like when you normally flash mismatched firmware, picks up signal fine)
Yes I am aware of how to unlock G6, V30 and G7 by flashing a different firmware and I have unlocked several HUNDRED of them. Even LS998 on V22B firmware.
This will flash successfully (I use Octopus tool, the newest LGUP tool is not released so can't do it that way) but it will still show the V350AWM model and will still be locked to AT&T. Only it will remove the AT&T bloatware.
It is a good solution to flash these if you brick your device. But it won't unlock them.
Click to expand...
Click to collapse
I have pulled the RSA certs from every model V35, G7, and V40 that are currently available, and LG learned their lesson from the WTF V30 exploit .. they use different certs for every model.
If you have cross flashed the V35, or G7 .. you are only flashing boot and system. If you had flashed an RSA signed partition, you would have had a brick.
I will be glad to post the certs if you like.
-- Brian
Oh sorry I didn't mean it to be insulting at all but flashing these files will not unlock it.
I'm new on this forum. Sorry for being disrespectful.. Everyone is very thankful to you Only WTF? Why would you suggest to flash something if you never tried it before?
To flash I did flash these firmwares but I used Octopus box (super highly recommended)
Lets do something constructive here though. If you have signed cert files let me test it. I have a couple AT&T V350AWM, we can brick them, it is OK. I'll load anything and post results here.
Again sorry about insulting retort but a forum like this should have only 100% clean reliable info.
Hello everyone,
I just bought a LGV35 form eBay for a few bucks but has bad imei is there any chance that I can unlock the phone? I want to use it outside USA, any idea or can somebody help me?
Regards
runningnak3d said:
I have pulled the RSA certs from every model V35, G7, and V40 that are currently available, and LG learned their lesson from the WTF V30 exploit .. they use different certs for every model.
If you have cross flashed the V35, or G7 .. you are only flashing boot and system. If you had flashed an RSA signed partition, you would have had a brick.
I will be glad to post the certs if you like.
-- Brian
Click to expand...
Click to collapse
Interesting, since the G7 and even V35 was released before V30 WTF was discovered (mid-May 2018). @TxanMoe started the WTF thread with his "crazy" story May 14 -- and you helped him unbrick his phone soon after that. I wrote the WTF instructions on May 21.
Well, V35 was released beginning of June 2018, but it was already in the pipeline by May 2018.
The RSA stuff for every variant is probably more an extension of what LG started with T-Mobile H932...
Very sad.
ChazzMatt said:
Interesting, since the G7 and even V35 was released before V30 WTF was discovered (mid-May 2018). @TxanMoe started the WTF thread with his "crazy" story May 14 -- and you helped him unbrick his phone soon after that. I wrote the WTF instructions on May 21.
Well, V35 was released beginning of June 2018, but it was already in the pipeline by May 2018.
The RSA stuff for every variant is probably more an extension of what LG started with T-Mobile H932...
Very sad.
Click to expand...
Click to collapse
Well, let me clarify. I have only been able to check models that have a KDZ that I can pull the certs from. Any model that either never has KDZ (AT&T or Sprint), or if a KDZ isn't publicly available yet .. I haven't been able to check since I can't get anyone to dump abl.
I will try to post a list of the ones I have checked when the holidays are over.
-- Brian
Hi
I have a lg v35 at&t unlocked and I'm using another carrier(metro pcs) but i can't update it to the latest software version.
Is there any way to get the latest software version?
rapidrayo said:
Hello everyone,
I just bought a LGV35 form eBay for a few bucks but has bad imei is there any chance that I can unlock the phone? I want to use it outside USA, any idea or can somebody help me?
Regards
Click to expand...
Click to collapse
I bought one too. It's bad esn. So someone can help to unlock to use it outside USA? I already tried unlocking company but they didn't find the code... Thanks:good:
Klenti said:
Hi
I have a lg v35 at&t unlocked and I'm using another carrier(metro pcs) but i can't update it to the latest software version.
Is there any way to get the latest software version?
Click to expand...
Click to collapse
How did you go about unlocking it? Did you buy it from ATT without a contract.. Did you use an unlocking service or from att directly for unlock?
Klenti said:
Hi
I have a lg v35 at&t unlocked and I'm using another carrier(metro pcs) but i can't update it to the latest software version.
Is there any way to get the latest software version?
Click to expand...
Click to collapse
If you put an AT&T MVNO sim in it, it should update. When I put a Red Pocket Mobile (MVNO) sim in my v35 along with wifi working, it updated the software to version V350AWM10w even though the phone was not yet activated on the red pocket network. If you can find a pre-paid AT&T sim, it should also work, but I'm guessing there.
(note, my v35 is locked to AT&T, I wonder if your phone being unlocked might have some other 'thing' that might be stopping it from updating)
It is to ask i am having an unlocked s8 active with different carrier and out of usa... no ota here i am able to get and stuck on May security patch.. can somone suggest a way to pull updates as site is listing 2 more FOTAs more there.. will greatly thankful
You cant get otas outside of the usa on the phone its impossible. I did however just upload the dec update to the guides thread. You can flash that.
twizt3d said:
You cant get otas outside of the usa on the phone its impossible. I did however just upload the dec update to the guides thread. You can flash that.
Click to expand...
Click to collapse
May be, if someone can connect through other's at&t phone in the US through vpn it could be done?
Golomidov said:
May be, if someone can connect through other's at&t phone in the US through vpn it could be done?
Click to expand...
Click to collapse
I doubt it, i would assume it needs to connect to att towers, it probably checks the sim too. But truthfully i have no idea, i just highly doubt it. Updating us phones overseas has always been done via odin and sideloading.
can I use this firmware over the AT&T S8 Active?
https://updato.com/firmware-archive-select-model?record=9A769F232AFE11E99F15FA163EE8F90B
for now I'm on G892AUCS3BRG1
i'm asking because that both my existing firmware and new one on Link above are the same 3rd bootloader
New from TMB G892USQS3BSA2
On My AT&T device G892AUCS3BRG1
in both fifth symbol from the right to left are (3)
vazovskiiii said:
can I use this firmware over the AT&T S8 Active?
https://updato.com/firmware-archive-select-model?record=9A769F232AFE11E99F15FA163EE8F90B
for now I'm on G892AUCS3BRG1
i'm asking because that both my existing firmware and new one on Link above are the same 3rd bootloader
New from TMB G892USQS3BSA2
On My AT&T device G892AUCS3BRG1
in both fifth symbol from the right to left are (3)
Click to expand...
Click to collapse
You're looking at the SM-G892U model. OP has the 892A. I wouldn't flash that unless you know they're interchangeable and also want a bunch of tmobile apps on the phone.
I've tried but even patched odin couldn't flash
Hello, I want to buy this phone since I have seen it in amazon for 360 dollars, my question is that it is AT & T software but unlocked for any operator, is this really the case?
I am reading reviews in Amazon that say it is not really Unlocked and can not be used with other operators.
I want to use it in Argentina with the Personal operator.
If it's carrier unlocked, you can use with any operator.
xela19115 said:
If it's carrier unlocked, you can use with any operator.
Click to expand...
Click to collapse
Thanks, for what I see I got confused with that of GSM or CDMA.
Check the only cheap and unlocked version that I see is the one with the AT & T software, is it easy to change the ROM to the Stock to receive updates?
Or is it better to leave it like this and update over time?
xela19115 said:
If it's carrier unlocked, you can use with any operator.
Click to expand...
Click to collapse
But you can't update firmware with any operator, even when carrier unlocked.
Think again... https://lg-firmwares.com/lg-lmv350ulm-firmwares/#tab=firmwares
MasterThiefGarrett said:
Think again... https://lg-firmwares.com/lg-lmv350ulm-firmwares/#tab=firmwares
Click to expand...
Click to collapse
Think again what? You still can't update with AT&T firmware. You're talking about flashing to non-AT&T firmware. But that's a workaround.
Carrier unlocking and using on non-ATT network lets you use the phone, but you won't get updates.
UNLESS YOU FLASH TO COMPLETELY DIFFERENT FIRMWARE, which is another topic.
I'm using the att version of the LGv35 using straight talk on att towers and I receive updates periodically on time no issues. So I would think any US carrier that uses att towers should receive updates.
Optimusman said:
I'm using the att version of the LGv35 using straight talk on att towers and I receive updates periodically on time no issues. So I would think any US carrier that uses att towers should receive updates.
Click to expand...
Click to collapse
But the op is asking about non-ATT. That's why he wants "carrier unlocked". Specifically he lives in Argentina, so he will NEVER use AT&T... But there's even people in U.S. who don't use AT&T nor AT&T MVNOs.
Carrier unlocked lets you use it in any carrier which has compatible bands, but you won't get updates. For that, you have to manually flash to other variant firmware KDZ
Just for the record, flashing to another firmware variant(at least on this phone) won't get you updates either. You'll need to manually download and flash each new update. I flashed my Amazon variant to the Google Fi kdz and never received another update, no matter how many came out. Had to start doing it manually, got annoyed, and flashed back to the Amazon kdz in anticipation of the Pie update coming out (eventually... Please LG, for the love of...)
As a side note, going from the Amazon software and using lgup to flash the gFi software as an upgrade worked fine, and I kept all of my data. Flashing back to the Amazon software as an upgrade soft-bricked my device and I had to do a full wipe and flash, and so lost all of my data. Reinstalling and reconfiguring all of your stuff is a pain in the ass when you don't have access to twrp for a proper backup.
Just bought this phone about a week ago, it is an Unlocked AT&T Model. It tells me basically that it does not need a OS Update - that it has the Latest 8.0. I am giving up on LG Support already!
Using their APK to update via USB told me that it cannot even check the Version of the OS, so definitely NO Update for this SUCKER!
Can anyone here PLEASE help me find a way to UPDATE this nice Smart Phone?
THANKS!
cyberized said:
Just bought this phone about a week ago, it is an Unlocked AT&T Model. It tells me basically that it does not need a OS Update - that it has the Latest 8.0. I am giving up on LG Support already!
Using their APK to update via USB told me that it cannot even check the Version of the OS, so definitely NO Update for this SUCKER!
Can anyone here PLEASE help me find a way to UPDATE this nice Smart Phone?
THANKS!
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-v35/help/change-att-rom-t4102067
ChazzMatt said:
https://forum.xda-developers.com/lg-v35/help/change-att-rom-t4102067
Click to expand...
Click to collapse
THANKS! Going to be to MUCH 4 dis ol' brain, I'm afraid, may have to hope/pray that LG just might dnld 9.0 for me or may ride 8.0 to me grave!
ChazzMatt said:
https://forum.xda-developers.com/lg-v35/help/change-att-rom-t4102067
Click to expand...
Click to collapse
This is what LG's response is to me about getting my AT&T Unlocked V35 Updated fm A. 8.0:
Hi Michael, we appreciate your time in getting back to us. I will be happy to assist you today.
In response to your inquiry, for carrier unlocked phones, the only way to get it updated is, you need to have a service again with the original service provider for them to send or push the Software update to your phone. While LG has no control with the software updates for carrier unlock phones, compared to manufacture unlock phones it automatically receives the software updates that was released OTA (Over the Air).
I hope I have provided all the information and wish it has been helpful in addressing your query. It has been a pleasure to help you out to the best of my knowledge and my skills.
Should you have any other questions, please feel free and don't hesitate to contact us again via Email, Live Chat, or Phone by calling 1-800-793-8896. As this email is used for outgoing mail only, you may send file attachments, replies, any information and further inquiries over to the email section of support https://www.lg.com/us/support/email-appointment and we will do our best to assist you without you having to repeat the details of your previous message.
Thank you for choosing LG Electronics!
Sincerely,
Johannes
I have to leave T-Mobile [cheaper/better] and go to AT&T - RATS!
ChazzMatt said:
https://forum.xda-developers.com/lg-v35/help/change-att-rom-t4102067
Click to expand...
Click to collapse
I heard from LG Support and they said that since it is an AT&T Unlocked Phone and not unlocked by them - I have to sign up with AT&T and noot my T-Mobile too get Updated....RATS....I just left
AT&T for better and cheaper service from T-Mobile and now I have to go back....guess I will and if/when they upgrade this NICE phone I will leave dem again!:laugh:
Or as I suggested, you simply cross flash to North American Open Market (NAO) firmware via Dev Patched LGUP.
You can also try temporarily putting in an AT&T SIM card (not even activated) and that can trigger AT&T update, if left for a few hours.
But people in other countries just cross flash to NAO as they don't need AT&T firmware whatsoever.
cyberized said:
This is what LG's response is to me about getting my AT&T Unlocked V35 Updated fm A. 8.0:
Hi Michael, we appreciate your time in getting back to us. I will be happy to assist you today.
In response to your inquiry, for carrier unlocked phones, the only way to get it updated is, you need to have a service again with the original service provider for them to send or push the Software update to your phone. While LG has no control with the software updates for carrier unlock phones, compared to manufacture unlock phones it automatically receives the software updates that was released OTA (Over the Air).
I hope I have provided all the information and wish it has been helpful in addressing your query. It has been a pleasure to help you out to the best of my knowledge and my skills.
Should you have any other questions, please feel free and don't hesitate to contact us again via Email, Live Chat, or Phone by calling 1-800-793-8896. As this email is used for outgoing mail only, you may send file attachments, replies, any information and further inquiries over to the email section of support https://www.lg.com/us/support/email-appointment and we will do our best to assist you without you having to repeat the details of your previous message.
Thank you for choosing LG Electronics!
Sincerely,
Johannes
I have to leave T-Mobile [cheaper/better] and go to AT&T - RATS!
Click to expand...
Click to collapse
ChazzMatt said:
Or as I suggested, you simply cross flash to North American Open Market (NAO) firmware via Dev Patched LGUP.
You can also try temporarily putting in an AT&T SIM card (not even activated) and that can trigger AT&T update, if left for a few hours.
But people in other countries just cross flash to NAO as they don't need AT&T firmware whatsoever.
Click to expand...
Click to collapse
Matt: TKS, I didn't think I'd ever need that AT&T SIM card, thru it away.........PLEASE tell this ol' man the easiest and safest way to "do da DEED" and FLASH it as you suggest above and thus be able to
stay w T-Mobile and eventually also get a better V. of 10.0.....Is it FOOL Proof? Hope so.......TKS:fingers-crossed:
cyberized said:
Matt: TKS, I didn't think I'd ever need that AT&T SIM card, thru it away.........PLEASE tell this ol' man the easiest and safest way to "do da DEED" and FLASH it as you suggest above and thus be able to
stay w T-Mobile and eventually also get a better V. of 10.0.....Is it FOOL Proof? Hope so.......TKS:fingers-crossed:
Click to expand...
Click to collapse
Yes, people report AT&T SIM card will do the trick. Either prepaid or postpaid, they are both the same. Supposedly they don't have to be activated -- as long as you have AT&T firmware on your phone.
Some say a Red Pocket (AT&T MVNO) SIM card will, also. While Cricket (owned by AT&T) SIM card will not.
ChazzMatt said:
Yes, people report AT&T SIM card will do the trick. Either prepaid or postpaid, they are both the same. Supposedly they don't have to be activated -- as long as you have AT&T firmware on your phone.
Some say a Red Pocket (AT&T MVNO) SIM card will, also. While Cricket (owned by AT&T) SIM card will not.
Click to expand...
Click to collapse
Called Best Buy to see IF I could pay someone there to Flash my V35, like you recommend, but they are not allowed to do things like that. Turning to Craig's List now.
Hey buddy, it's easy to do yourself. Just follow this comment and the linked guide. Process is the same. Super simple and straightforward. Let me know if you have any questions.
https://www.reddit.com/r/LgV35/comments/f2yag4/just_got_one_should_i_modify_it/fhg34cy
Latest firmware for the V35 now (AT&T does have an early version of the Android 10 update, but kdz not released. We have to wait for a ULM kdz to be released to flash the 10 and update. Until then we're on Android 9 still) is the 04/2020 update. Sort by date on lg-firmwares.com, for device choose LMV350ULM, you want the ULM as its the unlocked carrier free version of the V35, and crossflashing the AT&T version is completely safe (I'm using an AT&T V35 in Canada on Koodo with the ULM software). In the software list choose GFI or USA (I'd recommend the USA version, unless you're on google fi).
cyberized said:
Called Best Buy to see IF I could pay someone there to Flash my V35, like you recommend, but they are not allowed to do things like that. Turning to Craig's List now.
Click to expand...
Click to collapse
Buy one of these AT&T SIM cards. Less than $3 with free shipping.
Leave it in overnight, see if the OTA update shows up.
Keep your T-Mobile. This is just to trigger the update.
https://www.ebay.com/itm/174018618281
ChazzMatt said:
Buy one of these AT&T SIM cards. Less than $3 with free shipping.
Leave it in overnight, see if the OTA update shows up.
Keep your T-Mobile. This is just to trigger the update.
https://www.ebay.com/itm/174018618281
Click to expand...
Click to collapse
THANKS MUCHO Matt - I will definitely do that right away! Appreciate da TIP!
ugslick said:
Hey buddy, it's easy to do yourself. Just follow this comment and the linked guide. Process is the same. Super simple and straightforward. Let me know if you have any questions.
https://www.reddit.com/r/LgV35/comments/f2yag4/just_got_one_should_i_modify_it/fhg34cy
Latest firmware for the V35 now (AT&T does have an early version of the Android 10 update, but kdz not released. We have to wait for a ULM kdz to be released to flash the 10 and update. Until then we're on Android 9 still) is the 04/2020 update. Sort by date on lg-firmwares.com, for device choose LMV350ULM, you want the ULM as its the unlocked carrier free version of the V35, and crossflashing the AT&T version is completely safe (I'm using an AT&T V35 in Canada on Koodo with the ULM software). In the software list choose GFI or USA (I'd recommend the USA version, unless you're on google fi).
Click to expand...
Click to collapse
THANKS for Great Suggestion, I looked over the LINKS etc. and bookmarked but at my age etc., I am alot more TECH SAVY than probably most 81 yr olds BUT I just don't feel confident enough trying to follow all of those instructions, wish I did....know it appears SIMPLE, but I just paid for this NICE Phone and would HATE to BRICK it!
BTW...just abit ago I got notice you sent me a PM but when I tried to open it [SORRY] I guess my Blocker blocked it and sent it into
CyberSpace or something....can't seem to find it now. I just followed ChazzMatt's TIP - and ordered a $2.99 ATT Sim Card to put into my LG V35 to hopefully trigger aN UPDATE. Laters, Michael
Just follow this video for upgrading your V35 to latest firmware
so, (directed toward Chazzmatt) I'm just needing a recommendation on which one to do (or wait for). Ive got the ATT unlocked model on MetrobyTMobile. (LM-V350AWM) I first updated it via modified LGUP to V350ULM20d (V350ULM20d_00_NAO_US_OP_0612), then to V350ULM20f (V350ULM20f_00_NAO_US_OP_0218). ((it still shows as V350AWM in the sys info, but all bloatware is gone))
Now, a while back I went into an ATT store and got them to sell me an un-activated sim card, and tried to update that way and failed (not knowing you had to wait a couple hours or overnight). My question is, would the simcard ota update work for me, and if so, would it be the full blown bloated att version of 10.
Or, should I just keep patiently waiting for the NAO KDZ (V350ULM30?) like you've been screaming for us to do since the very beginning! lol
(apologies for the gratuitous use of parentheses)
*Update - They're now saying we will be getting LG's new Velvet UI, should I wait even longer for that to be released???
burt_mcgirt said:
so, (directed toward Chazzmatt) I'm just needing a recommendation on which one to do (or wait for). Ive got the ATT unlocked model on MetrobyTMobile. (LM-V350AWM) I first updated it via modified LGUP to V350ULM20d (V350ULM20d_00_NAO_US_OP_0612), then to V350ULM20f (V350ULM20f_00_NAO_US_OP_0218). ((it still shows as V350AWM in the sys info, but all bloatware is gone))
Now, a while back I went into an ATT store and got them to sell me an un-activated sim card, and tried to update that way and failed (not knowing you had to wait a couple hours or overnight). My question is, would the simcard ota update work for me, and if so, would it be the full blown bloated att version of 10.
Or, should I just keep patiently waiting for the NAO KDZ (V350ULM30?) like you've been screaming for us to do since the very beginning! lol
(apologies for the gratuitous use of parentheses)
*Update - They're now saying we will be getting LG's new Velvet UI, should I wait even longer for that to be released???
Click to expand...
Click to collapse
The AT&T SIM card trick only works if you still have AT&T firmware installed.
If you cross flashed to another V35 firmware you need to wait for that KDZ to be released. It's coming. LG is just slow. Same deal last year with Pie.
ChazzMatt said:
The AT&T SIM card trick only works if you still have AT&T firmware installed.
If you cross flashed to another V35 firmware you need to wait for that KDZ to be released. It's coming. LG is just slow. Same deal last year with Pie.
Click to expand...
Click to collapse
ah, thanks for clearing that up! I'm guessing we might have to wait even longer now that they've announced we'll be getting Velvet UI and need time to add that to the KDZ, or is the UI update something that will come later on?