Hey guys,
Yesterday night before i went to bed, three blue spots appeared on the screen.
The degree if their appearance depend on the content shown on the screen -
*if viewing bright white light (such as an artical with white background) the spots are nearly invisible
*when darker colors are shown, for example when i pull the statues bar down - the spots are visible and annoying.
*when the screen is completly dark, the blue spots are highly visible
http://pasteboard.co/28p3JGIm.jpg
http://pasteboard.co/28pbhZts.jpg
http://pasteboard.co/28pdeBFC.jpg
I've never dropped\hit\damaged my phone in any way, i had the case\glass a few days before i even had my phone, and yesterday night those three spots just appeared out of no where - what should i do?
Images not working. I haven't got or seen blue dots on screen before. I would suggest contacting Motorola.
Sent from my XT1572 using Tapatalk
get intouch with Motorola , thats a fault
Does anyone know why this happens? I just happened to me after more than six months of peace.
It's happening to a lot of people. Same with me, and the spots on mine were in the center near the bottom of the display.
Happened to me randomly one month after i got the phone. Had to get replacement from moto. Haven't had problems with new. Been about 8 months. Fingers crossed.
My wife and I each have the same phone her's has had the same blue dot for a month or 2 now: http://i.imgur.com/90U6BMR.jpg
Mine just developed a small white dot in the upper right corner of the screen.
ugh.
I believe these are from pressure against the back of the LCD. After I replaced my screen due to cracks I noticed that I had to play with all 20 screws a lot becasue if even one was too tight it would make a spot on the screen and I had to keep adjusting all the screws slightly, it was like putting a head on an car engine, slightly too tight on one screw would often cause inperceptable torque on the LCD and then a spot would appear above a different screw. Took a lot of adjustment and its still not perfect. From the pictures I'm seeing of the large blue spots and their locations, I'm susupicious something got jarred between the LCD and MB which is very sensitive as I said almoast imperceptable screw torques are enough to cause very similar artifacts (though they could also be just causing some kind of ground issue also, they are dead white with light blue around them, very small becasue the screws are small, and also very particularly pronounced.
So WILD guess is three things:
1 something not sharp or pointed moved somehow and is causing pressure on the back of the lcd directly below the blue spots.maybe those 2 rubber boots that cover two connections (you see them immediately and must remove both when doing anything to the phone after the glued on back is off.
2 LCD Failure
Probably 2 but if you are capable and adventurous check 1. Or ship it if still under warrnaty. Anyone know how long is the warranty? If you buy off of MOTO like I did?
I must be the special one. I have a red dot on mine.
I noticed a vague blue spot in my moto g 2015 today as well. When i press it lightly, the center of the spot turns to a small sharp bright white dot.
I aggree it must be caused by internal pressure. I had the same sort of spot on my HTC Desire. When i replaced the battery, the spot was gone. Turns out a drained/old Li-ion cell expands quite a bit, this caused the pressure from the inside on the screen.
My Moto G is only 6 months old so you wouldn't expect the battery to be faulty yet... Too bad the Moto G doesn't let you replace the battery yourself in an easy way like with my old HTC.
Did anyone experience the spot disappearing after replacing the battery with a fresh one? And does anyone know if old Moto G batteries look thicker than normal after they die?
I just started seeing this about a month ago, mine looks like the Pepsi logo, red and blue orb.
Related
Hello Guys,
Pretty funny story. Few days ago i've ordered my ASUS transformer and today it has arrived.
OH well minutes after unboxed i noticed big dirty black smash inside the screen.
RIght away taken a ride of two hours to the store and replaced into brand new one.
REV B5 (Same as first one)....
Coming home I noticed from very random angles I can notice like VERY Small, slim black dots which can seen on blue/white etc.. background but not always seen...from specific random angles can be seen..
Is it normal for this screen type? Should I ask the support devision for lab service to fix/replace it? But then means I will need probably wait two weeks...
looking for your words
Thanks a lot!
It is a pattern grid like ###########? I see it faintly when my screen is smudged with hand grease or when I clean the screen and blow my breath on it.
Well besides the patter which i dont know why they did it this way lol i see some very small dots..try open blank white page...and look on the screen from front and random angles closely...see if you can find small dots...?
The faint ###### pattern is the capacitive touch sensing grid.
Those faint black dots are not supposed to be there. Check to make sure that your screen is completely clean, free of smudges. If the black dots are still apparent, then it can be either that you have dead pixels or some particles (maybe dust) trapped between the screen and the glass.
weird...its really extremely small dots...not always even seen..just some times from very specific angles...so think i will just pass it.
For safety emailed the ASUS distributor who in charge for the local warranty service to let him know i see those dots in case if in future i want support for this...
PS: TRY Some blue background and see if you able to see some sort of dots...not even black but dots...
I've thoroughly inspected my Transformer's screen several times since I got it, and I'm happy to say that I've never noticed anything bad besides a bit of light bleed on the bottom left. I'm sorry it's not the same case for you.
Well not big deal... Those dots not really seen in 99.5% of the time so really ok...
besides this dots i had some small creaks of the back plastic... but again this happens to almost every TF owner...
Anyways reported about this small dots to the warranty company of Asus in my country so they aware in case if i decide ask them fix it in future...also asked them for professional opinion about it..for case...
besides this small issues which not even seen most of the time...i am really happy with the TF rock and roll!
How can i tell the difference between them , i have a few little dots on the top left of my screen i notice it when i turn the phone on and also when the screen is off.
If it's in the top left, that's likely dust. That's a problem area in HTC quality control for this device.
Also, if they are there when the screen is off then its' certainly dust.
Dead pixels do 1 of 2 things. They either don't work at all so they are black when the rest of the screen is on, or they stay 1 color constantly lit so they are lit when the rest of the screen is black (not off)
If the screen is powered off, even dead pixels don't stay lit.
Also, dead pixels aren't nearly the common problem they were on LCD screens just 5-7 years ago. I remember going through multiple computers monitors once trying to find a good one when LCD monitors first became affordable. It was a nightmare.
Now...you can buy $1000 big screen LCD TV's and not even worry about it.
Anyone ever come up with a solution to the corner dust problem. I have a patch about 1/2 inch by 1/2 inch in that corner and it's so thick I can't see the notifications in bright sunlight. I'd rather not take it apart and wondered if a powerful vacuum or something might work?
Most people send it back in for a replacement
Very simple - if you can see something even when display is off then its dust else dead pixel.
The first Nexus 4 I received was a rev10 I got that shipped the third week after release. It has a perfect calibration with beautiful popping whites and dark blacks. Unfortunately, I had the issue where a portion of the screen would tint yellow (about the size of my thumbprint) after it heated up.
This annoyed me so I got an RMA phone and it turned out that the entire scree was an ugly yellow even without heat. This was shipped to me from jan 1-7 I forget the actual date but it was recent. It also had a sluggish vibration issue that annoyed me. I sent it back and they sent me another RMA phone that arrived on the 14th and what do you know, it also has a yellow tint to the screen. The colors are much darker compared to my original screen as well and I tried color calibration apps but they just don't look as good as the original. This phone is a rev11 if that matters.
Do all the newly made phones have color issues? Or are there well calibrated ones out there and I should keep on RMAing?
The new screens just don't look as good and are really ugly. Someone let me know if they have a good screen
If you figured that out from an extensive poll of people then I'd understand that conclusion but from 2 RMA that's just plain stupid!
My screen is white as can be, compared to One X its looks insanely good, the One X colors pop and are really vibrant though
slashei2 said:
the first nexus 4 i received was a rev10 i got that shipped the third week after release. It has a perfect calibration with beautiful popping whites and dark blacks. Unfortunately, i had the issue where a portion of the screen would tint yellow (about the size of my thumbprint) after it heated up.
This annoyed me so i got an rma phone and it turned out that the entire scree was an ugly yellow even without heat. This was shipped to me from jan 1-7 i forget the actual date but it was recent. It also had a sluggish vibration issue that annoyed me. I sent it back and they sent me another rma phone that arrived on the 14th and what do you know, it also has a yellow tint to the screen. The colors are much darker compared to my original screen as well and i tried color calibration apps but they just don't look as good as the original. This phone is a rev11 if that matters.
Do all the newly made phones have color issues? Or are there well calibrated ones out there and i should keep on rmaing?
The new screens just don't look as good and are really ugly. Someone let me know if they have a good screen
Click to expand...
Click to collapse
o am jee :d
SlasheI2 said:
Do all the newly made phones have color issues? Or are there well calibrated ones out there and I should keep on RMAing?
The new screens just don't look as good and are really ugly. Someone let me know if they have a good screen
Click to expand...
Click to collapse
My screen is perfect. You should maybe change the light bulbs in your place..
I have a revision 11 and a revision 10 which is going back due to speaker crackle. The screen on my revision 11 looks cooler but I certainly wouldn't have described either as being yellow.
Sent from my Nexus 4 using Tapatalk 2
It goes away after a couple days...
As ctowne said, it goes away after a while. It's the glue that is used to laminate the glass and display.
Mine was pretty yellow at the start, however a couple of weeks on, and it's absolutely fine now.
Yes let us assume that the two phones we received is indicative of all phones. Makes sense.
Sent from my Nexus 4 using Tapatalk 2
ctowne said:
It goes away after a couple days...
Click to expand...
Click to collapse
lambomanx1 said:
As ctowne said, it goes away after a while. It's the glue that is used to laminate the glass and display.
Mine was pretty yellow at the start, however a couple of weeks on, and it's absolutely fine now.
Click to expand...
Click to collapse
+1. Mine was yellow. After a few days, the screen is normal. Rev. 11.
lambomanx1 said:
As ctowne said, it goes away after a while. It's the glue that is used to laminate the glass and display.
Mine was pretty yellow at the start, however a couple of weeks on, and it's absolutely fine now.
Click to expand...
Click to collapse
r5xscn said:
+1. Mine was yellow. After a few days, the screen is normal. Rev. 11.
Click to expand...
Click to collapse
Sent from my Nexus 4 using Tapatalk 2
Yeah mine went away within 3 days at the very most. Also, you can adjust the screen settings with fauxclock if you really want to tweak it. As long as you have uniform yellow on the whole screen then don't worry about it. If certain spots are yellow after a few days then you might have a problem.
To those of you whose yellow tint went away, was the yellow tint uniform over the entire screen before it went away?
I just got my rev11 RMA, and I've only got a yellow tint on the bottom half of the screen. Should I expect it to go away over the next few days?
Also, just holding it side by side with my rev10, I have to say, in addition to the yellow tint, the rev11 just seems a little bit less clear and a little bit less sharp. Could be because it has the factory Google screen protector on it, I guess, whereas my rev10 has an SGP crystal clear on it.
On the plus side, the light bleed is improved on rev11. Nowhere near perfect, but signifciantly better than my rev10.
If the yellow tint goes away, I can live with the rev11. If it does not go away, it will be another RMA.
I got a Rev11 one, but never had a yellow screen from the start. I guess i've been a lucky one..
When I did my RMA, my rev_11 had a more yellow tint to it on whites.. I could really tell on apps like SMS...
colors look OK and I've gotten used to it..
My rev 11 doesn't have a yellow tint.
Sent from my Nexus 4 using xda app-developers app
phositadc said:
To those of you whose yellow tint went away, was the yellow tint uniform over the entire screen before it went away?
I just got my rev11 RMA, and I've only got a yellow tint on the bottom half of the screen. Should I expect it to go away over the next few days?
Also, just holding it side by side with my rev10, I have to say, in addition to the yellow tint, the rev11 just seems a little bit less clear and a little bit less sharp. Could be because it has the factory Google screen protector on it, I guess, whereas my rev10 has an SGP crystal clear on it.
On the plus side, the light bleed is improved on rev11. Nowhere near perfect, but signifciantly better than my rev10.
If the yellow tint goes away, I can live with the rev11. If it does not go away, it will be another RMA.
Click to expand...
Click to collapse
All 3 of my phones have had an uneven yellow tint. I RMA'd a rev10 first which had a brighter and cooler screen than the two replacements, but and uneven tint along the bottom 1/3rd. My rev11's, the one I sent back and the one I have now have a less bright display, and the one that went back had half of the screen horizontally yellow tinted, this one has yellow tint in the bottom left corner. It's the least tinted out of all of them.
FTR the uneven tint did NOT go away on my first two phones. While overall yellowness may clear up, the uneven factor doesn't change.
All 3 have had backlight bleed, was probably the least on my rev10, the first rev11 had it pretty bad along the taskbar and left/right hand sides. The second rev11 has it on the taskbar, but a little less, and the top left hand side.
The displays are just pretty crappy LG IPS panels, I'm certain most people will be on an RMA goose chase to get a phone without any uneven tinting/backlight bleeding. They'll exist, but how long do you want to ride your luck changing? I also think LG have changed the display between rev10 and rev11, as as I said both my rev11s are duller.
I got my third replacement N4 today (REV 11) and it (like the previous 2) has the yellow tint to the bottom of the screen and left edge in particular. Looks noticeably brighter the bottom half too (slight though). I'm really disappointed with this as I don't think it's looking like there will be any (or many) from this current batch that don't have this problem.
Does anyone know from a technical point of view why LCD panels are prone to this - why is it such a consistent problem in manufacturing? What exactly is the cause and why isn't it prevented? Any links? I've Googled it but no results...
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
have you drop the phone? coz mine develop a horizontal one on the top display .. drop from about 1 feet from the ground
fortunately for me, after i reboot it, the issue gone for good
zekurosu said:
have you drop the phone? coz mine develop a horizontal one on the top display .. drop from about 1 feet from the ground
fortunately for me, after i reboot it, the issue gone for good
Click to expand...
Click to collapse
No drops. Phone was in an OtterBox Defender.
Didn't go away after multiple reboots.
Brought it in to a Sprint store and they ordered me a replacement.
Glad I hadn't rooted it yet.
i notice these lines to, its more of a grid that i see, vertical and horizontal lines, i believe its supposed to make the phone more responsive to the touch of our fingers, making it react faster than other android phones...just an assumption
Trident said:
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
Click to expand...
Click to collapse
I had this happen after I had my screen replaced (cracked screen). Local repair guy replaced the screen, seemed to be working fine. I took it home and got these same vertical white streaks. Took it back to him, he found some kind of lose connector or board somewhere below the screen and had to apply some adhesive. I'm picking it up today to see if the issue is truly fixed.
Mine showed after i took the phone to capture images under direct sunlight
WhiteZero said:
I had this happen after I had my screen replaced (cracked screen). Local repair guy replaced the screen, seemed to be working fine. I took it home and got these same vertical white streaks. Took it back to him, he found some kind of lose connector or board somewhere below the screen and had to apply some adhesive. I'm picking it up today to see if the issue is truly fixed.
Click to expand...
Click to collapse
Did it end up working... i dropped mine and had the screen replaced then it showed white lines and then the display just stopped working (Its just black) and i can hear the sounds it makes but i cant see anything so i need some help
cocook2000 said:
Did it end up working... i dropped mine and had the screen replaced then it showed white lines and then the display just stopped working (Its just black) and i can hear the sounds it makes but i cant see anything so i need some help
Click to expand...
Click to collapse
Yes, I havent had a problem since.
Trident said:
Very interesting. Out of the blue, when I turned my phone on this afternoon I started seeing top to bottom vertical banding. I've noticed that it changes depending on what colors are on the screen, especially in the top/status bar. They are mostly white/gray, but there is a little blue and red.
The phone is only 8 days old, so I'm planning on bringing it back to Sprint on Monday morning. I'm quite sure it's a hardware issue, but I haven't seen anyone else posting about it with this device. I only wanted to see if anyone else had this experience so that I could decide whether it was a design defect that would cause me to reconsider my choice of this phone.
Peace.
Click to expand...
Click to collapse
I have this exact issue, only difference is that the screen sometimes goes black. I noticed that when it does of I press the lower part of the screen it will display the white grid briefly then go black again. I have tried holding down the circuitry near the connector at the lower part of the screen down but to no avail. Please help.
I think I've experienced the same with my phone after a DIY display replacement. I put some electrical tape between the display connectors and the radio cable. Make sure that the tape is holding all the display connectors in place.
Hi,
Dropping my phone was the worst thing that could happen with my phone.
I found someone who would do the screen replacement and after nearly two months he finally returned the phone two me.
At first glance it seemed ok but closer inspection have shown me that:
- the panel used was JDI instead of LGD so a japanese panel instead of the 'original' LG
- serious screen bleed contouring the whole screen
- highlights on the screen, points in the screen where I can clearly see the backlight being brighter than everywhere else
- luminosity is lower than the original.
The last two points are very annoying. I compared my phone with a phone displayed in a shop and I see that the screen on the shop's phone is brighter that mine, even without adaptive brightness and @ 100% luminosity.
Could this be due to different panel manufacturer (JDI instead of LGD)?
The screen bleed could be due to the screen being badly glued but I am not sure...
But the bright speckels are annoying also. In bright areas this is very much noticable, a white picture shows two small areas brighter which indicates to me that the back of the panel has something behind that 'pushes', hard to explain.
Anybody had similar issues or had his screen repaired?
You can see my issues in the attached screenshots...
laboratik said:
Hi,
Dropping my phone was the worst thing that could happen with my phone.
I found someone who would do the screen replacement and after nearly two months he finally returned the phone two me.
At first glance it seemed ok but closer inspection have shown me that:
- the panel used was JDI instead of LGD so a japanese panel instead of the 'original' LG
- serious screen bleed contouring the whole screen
- highlights on the screen, points in the screen where I can clearly see the backlight being brighter than everywhere else
- luminosity is lower than the original.
The last two points are very annoying. I compared my phone with a phone displayed in a shop and I see that the screen on the shop's phone is brighter that mine, even without adaptive brightness and @ 100% luminosity.
Could this be due to different panel manufacturer (JDI instead of LGD)?
The screen bleed could be due to the screen being badly glued but I am not sure...
But the bright speckels are annoying also. In bright areas this is very much noticable, a white picture shows two small areas brighter which indicates to me that the back of the panel has something behind that 'pushes', hard to explain.
Anybody had similar issues or had his screen repaired?
You can see my issues in the attached screenshots...
Click to expand...
Click to collapse
I don't think your issues is the panel type, i replaced mine and got a JDI from eBay. I don't notice any difference from my old one, which was not JDI. I would say you just got a poor screen. Not the fault of the installer either, i would try to get hold of the screen seller, or just accept the loss and replace it again.
Sent from my LG-LS980 using XDA Free mobile app
scottdanpor said:
I don't think your issues is the panel type, i replaced mine and got a JDI from eBay. I don't notice any difference from my old one, which was not JDI. I would say you just got a poor screen. Not the fault of the installer either, i would try to get hold of the screen seller, or just accept the loss and replace it again.
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
I can agree that the panel type is not the culprit but the screen bleed is definitely the installers fault.
I am not very happy replacing it again as the total cost would mean that I could have bought a new phone for the same price...
My feeling is that the seller of the screen has delivered a used screen and damaged the silver back of the panel by removing it from the old device (the bright highlights could be from a prying tool used while recuperating the screen.). Too bad , lesson learned = do not drop the phone as the screen shatters very easily and when repairing, find a reliable repairsman...
Accept the loss seems to be the only option in this case...
Maybe I will have to disassemble/assemble the phone myself and do with with extra love and care and sense of detail....
laboratik said:
I can agree that the panel type is not the culprit but the screen bleed is definitely the installers fault.
I am not very happy replacing it again as the total cost would mean that I could have bought a new phone for the same price...
My feeling is that the seller of the screen has delivered a used screen and damaged the silver back of the panel by removing it from the old device (the bright highlights could be from a prying tool used while recuperating the screen.). Too bad , lesson learned = do not drop the phone as the screen shatters very easily and when repairing, find a reliable repairsman...
Accept the loss seems to be the only option in this case...
Maybe I will have to disassemble/assemble the phone myself and do with with extra love and care and sense of detail....
Click to expand...
Click to collapse
Since the digitizer comes glued to the glass I'm more inclined to blame the screen/seller than the installer. But you know the saying... "If you want it done right...". All the best on getting it sorted and working properly.