Related
https://github.com/MotorolaMobilityLLC/kernel-msm/releases/tag/MMI-LPI23.72-16.4
This is the wrong section, Osprey is Moto G (1st Gen)
Edit: Sorry you are correct Osprey is indeed our Gen3,
1st Gen is 'Falcon,' 2nd Gen is 'Titan' and 3rd Gen is 'Osprey.'
thanxs for you
Can any developer take a look and get a good start in kernel development. Back up is good by default stock kernel and stock rom btw.. its giving 7:15-7:20hrs of SOT everyday (HSPA & WiFi). Wondering whether hotplug could improve further to 8hrs sot in a single charge
@TeamMex
@kairi_zeroblade
@savoca
@YoshiShaPow
@faux123
@Flashhhh
@Blechd0se
@alin.p
@attack11
==vj== said:
Can any developer take a look and get a good start in kernel development. Back up is good by default stock kernel and stock rom btw.. its giving 7:15-7:20hrs of SOT everyday (HSPA & WiFi). Wondering whether hotplug could improve further to 8hrs sot in a single charge
@TeamMex
@kairi_zeroblade
@savoca
@YoshiShaPow
@faux123
@Flashhhh
@Blechd0se
@alin.p
@attack11
Click to expand...
Click to collapse
thnks for tag me
I will check it thnks
TeamMex said:
thnks for tag me
I will check it thnks
Click to expand...
Click to collapse
Thank you soo much for considering my request
I attempted myself for compiling as i had no response from anyone whom i tagged. Succeeded building kernel, booted fine with all 18 modules. But for some reason WiFi couldn't Turn_ON even though i was able to compile prima/pronto Wlan modules and strip it for flashing. Did numerous attempts still didn't success. On top i am running a 10 years old Pentium D processor which is heck slow takes me 3:30hrs to complete compiling one build of kernel.
I am looking forward for your build as i remember your kernel for 1st gen was doing great. And thank you again for responding and considering to my tag
Chipset : msm8916
Wlan Chipset: Pronto
There are a few topics discussing battery life in general but it's a bit difficult to find basic information as described below.
Discuss battery-life in this thread: Battery life discussion here
Template:
Model number:
SoT(Screen on time): ## hours, ## minutes
Time on battery: ## hours, ## minutes
Battery charge:
Firmware:
Android version:
Kernel:
Primary use:
Model number: SM-920F
SoT(Screen on time): 2 hours, 50 minutes
Time on battery: 17 hours, 2 minutes
Battery charge: 38%
Firmware: Xtrestolite Deo-Mod 3.0 FINAL
Android version: 6.0.1
Kernel: Hacker Kernel V14
Primary use: Browsing, Instagram and Snapchat
Model number: g920fd
SoT(Screen on time): ## 5 hours, ## 15 minutes
Time on battery: ## 20 hours, ## 11 minutes
Battery charge: 7 %
Firmware: stock last germany
Android version:6.0.1
Kernel: terminator - alexis
Primary use:coc-clash royale-chrome-telegram
choosing between Galaxy S6 and Nexus 5X, which one would you reccomend for battery life? Nexus 5x gives to me 2:30 maximux (probably 3 if not used much) of sot
I've got both and I don't know which one to keep for myself...
Model number: G920F
SoT(Screen on time): 2 hours, 3 minutes
Time on battery: 21 hours, 47 minutes
Battery charge: 36%
Firmware: Stock Rom BTU PF1
Android version: 6.0.1
Kernel: Arter v20
Primary use: Texting, Browsing, WhatsApp
Caesium kernel is made with a focus on improving battery life without bloating the kernel with extra cpufreq governors, I/O schedulers and the like, providing a lean package that just works.
The kernel is based on LineageOS's MSM8916 kernel for cyanogen devices and should work with all nougat ROMs.
Notable features :
Updated with the latest CAF release
Upstream sdcardfs merged
Full and up-to-date F2FS support
Upstream ext4 improvements
Improved Wi-Fi driver with support for Kali Nethunter (needed patches are included, for whenever someone is interested in porting it to Yunique. I won't be the one.)
Downloads:
AndroidFileHost
Kernel Source:
GitHub
Latest release : Post #108
Testing builds for Caesium v2.1 are available! Check this post for details
thnx bro,for continuing yunique development.
Today's run with Caesium on XOS : 18 hour uptime with 5h 57m of screen-on time. #FeelsGoodMan
MSF Jarvis said:
Today's run with Caesium on XOS : 18 hour uptime with 5h 57m of screen-on time. #FeelsGoodMan
Click to expand...
Click to collapse
Unable to install, showing ERROR 6 message, I am on RR 5.8.2
debaadak said:
Unable to install, showing ERROR 6 message, I am on RR 5.8.2
Click to expand...
Click to collapse
Sorry for the incovenience, a new build has been uploaded to address issues in flashing.
Does it support 7.1.1 and 6.0.1 both??
anurag061 said:
Does it support 7.1.1 and 6.0.1 both??
Click to expand...
Click to collapse
I don't test it for 6.0 so I cannot tell you if it is compatible. Found no reason to stick with Marshmallow when Nougat was being so great for me.
Version 1.7 is uploaded with the following changes
EXT4 Improvements
KCAL support
Support for external HID devices like USB keyboards, game controllers and mice.
SELinux hardening
exFAT support
UKSM support
Faster bootup
Check out the full changelog here
MSF Jarvis said:
Caesium kernel is made with a focus on improving battery life without bloating the kernel with extra cpufreq governors, I/O schedulers and the like, providing a lean package that just works.
The kernel is based on LineageOS's MSM8916 kernel for cyanogen devices and should work with all nougat ROMs.
Notable features :
Updated with the latest CAF release
Upstream sdcardfs merged
Full and up-to-date F2FS support
Upstream ext4 improvements
Improved Wi-Fi driver with support for Kali Nethunter (needed patches are included, for whenever someone is interested in porting it to Yunique. I won't be the one.)
Downloads:
AndroidFileHost
Kernel Source:
GitHub
Latest release : Post #8
Click to expand...
Click to collapse
Thanks brother for this development.
Battery draiange problem resolved in 7.1 Roms.
Checked it in AOSP Extended, RR & XOS. In AOSP Extended sometimes UI laggy anyway it is working nice with XOS and RR. Loved it.
MSF Jarvis said:
Caesium kernel is made with a focus on improving battery life without bloating the kernel with extra cpufreq governors, I/O schedulers and the like, providing a lean package that just works.
The kernel is based on LineageOS's MSM8916 kernel for cyanogen devices and should work with all nougat ROMs.
Notable features :
Updated with the latest CAF release
Upstream sdcardfs merged
Full and up-to-date F2FS support
Upstream ext4 improvements
Improved Wi-Fi driver with support for Kali Nethunter (needed patches are included, for whenever someone is interested in porting it to Yunique. I won't be the one.)
Downloads:
AndroidFileHost
Kernel Source:
GitHub
Latest release : Post #8
Click to expand...
Click to collapse
The ultimate solution for slow charging, battery draining, phone heating issue. Not only it changes fast, battery stay much longer. Never felt the heating issue during charge or heavy usage.
This kernel is amazing! Hands down. Gave a whole new life to Yunique. Hope to see more governors in upcoming updates
Ruvy said:
This kernel is amazing! Hands down. Gave a whole new life to Yunique. Hope to see more governors in upcoming updates
Click to expand...
Click to collapse
There's a poll at the top of this thread about what direction should I take the kernel in. Please vote on it and I'll release 1.8 with the results in mind
MSF Jarvis said:
There's a poll at the top of this thread about what direction should I take the kernel in. Please vote on it and I'll release 1.8 with the results in mind
Click to expand...
Click to collapse
Was first to vote
Ruvy said:
This kernel is amazing! Hands down. Gave a whole new life to Yunique. Hope to see more governors in upcoming updates
Click to expand...
Click to collapse
you just steal my words I was also going to say this
Started a beta-testing channel on Telegram here, feel free to share your experience with each build over Telegram by clicking on this link
I want to use f2fs file system on dalvik,cache,internal,external SD card. When I format f2fs through TWRP it shows error "partition can't mount:no such device" . Iam using rr5.8.2 & cesium kernal installed....Please help me
@rahul said:
I want to use f2fs file system on dalvik,cache,internal,external SD card. When I format f2fs through TWRP it shows error "partition can't mount:no such device" . Iam using rr5.8.2 & cesium kernal installed....Please help me
Click to expand...
Click to collapse
It's an issue with your recovery not the kernel.
Sent from my YUNIQUE using XDA Labs
Nothing happened for me.
I flashed this kernel over RR latest build and still having the same problem with battery. It's going down really quickly and the charging time has also increased as well.
How to flash this kernel?
ankitj1611 said:
How to flash this kernel?
Click to expand...
Click to collapse
U need to install custom recovery to flash the kernel
Custom kernel Is Completely New Concept For Meizu M2/Mini Users So I Am Going To Clarify About It In This Post
Note:I am not responsible for any kind of damage to your device nor a developer is responsible for it.You are only&only responsible for it
Important Suggestion Please Take A Recovery Backup Of Boot.img Before proceding
How to Take Backup? See Below
1)Boot To Recovery (TWRP Suggested)
2)Go to backup and restore menu
3)Select Backup
4)In Menu Just Select Backup of Boot.img
5)Create a backup of it. :fingers-crossed:
6)You are done
Requirements
1)Bootloader Unlocked+Custom Recovery flashed
2)Device Specific Meizu M2/Mini
As you guys may noticed in before post of mine about Lineage OS&Resurrection Remix Rom post I have mentioned about custom kernel
So today i am going to clarify it how it works how it make our phone to work more fluently or degrade it performance and many more features of it :fingers-crossed:
First of All A Honourable Mention For Our Developers of Meizu m2 /mini :angel:
Qus1 (Custom kernel Devloper)
Divis 1969 (Custom Rom Developer)
Crezil1 (ROM Porter (Resurrection Remix))
Yusuf (ROM Porter)
Slasher (ROM Porter(Miui))
Vasiliy.Ivanov (Device Tree Founder For M2/Mini)
Remind me if i forget anyone :silly:
So lets Begin!
Custom Kernel
Difference Between Stock Kernel & Custom kernel.
Stock Kernel Is developed by Flyme For there os (which is Preconfigured by them)
There kernel is good for performance and good in ram management but sucks in battery for most people they all complain about battery this is an alternative way to do so
Qus1 Developed Custom kernel Big.Litle is Stable now
Stable Kernel:
Kernel V4.6 Information: Vibration standard. many supplements on the CPU.
Information about V4.6biglittle kernel:
Works with biglittle, optimized governor interactive, interactiveplus; low vibration. With specific Roms improve energy saving process.
Information about kernel V4.7 + 4.7biglittle:
Livedisplay added from source divis1969 support cm, Lineageos& Resurrection Remix.[/SIZE]
Kernel Notes v4.9: added governor: INTERACTIVEPLUS, CONSERVATIVE, THUNDERX (will suit lovers of energy savings); added tcp: BIC, HTCP, HYBLA,added ioscheduler: bfq; added dynamic synchronization fs; Off Gentle fair sleepers; Optimization added battery during charging; added 3 WiFi control mode; added ThunderQuake Engine 1.0 - Vibration Intensity Controller forvibration button and the phone is regulated in the appendix). gestures to awakening on custom bikes, sweep2wake left to right on the screen and off doubletap2wake on screen off. AIC adjustment core functions. original post varun.chitre15, were taken from the changes.
Kernel Notes V4.9biglittle: works with biglittle, optimized governor interactive, interactiveplus (max freq 1170 both); low vibration. Target nucleus improve energy saving process. Core with additions of the CPU can be used as a biglittle, and without.
Starting with V4.9 + 4.9biglittle: ksm added, initially turned off, you can turn on placing script in the system / etc / the init.d / ksmON
I Call It Big.Little Kernel :silly:
Personal Suggestion tested by me So Don't worry
Cons?
Yes it Do Have Cons Too.
What are Those ?
1)If a noob use this and tweak it improperly it can bring very strange Results. :silly:
2)Makes Display Dim so that it can save more power (If you want to use it with brightness increase brightness thats it) (In Kernel) :crying:
3)If you Enable Double Tap to sleep& Double Tap to wake function in Kernel and you stop that function in setting of OS it will still work
4)it has power to change Vibration Control Modifying it again and again can cause a hardware Failure
5)Lowering down power of cpu can cause Deep sleep
Features
1)Big.Little
Presenting you the New Innovative Big.Little Custom kernel For Meizu M2/Mini :laugh:
1)You can modify vibrations level of your device
2)You can enable double tap to wake and double tap to sleep in any rom
3)Can modify frequency of CPU
4)Cpu governers like Interactive plus,ThunderX included
5)Can tweak for IO schedulers
6)Low memory killer
Why it is powerful and How it is useful see it here here
https://www.arm.com/products/processors/technologies/biglittleprocessing.php
Tweaking suggested By kernel Dev Qus1
Download Kernel Auditor
from play store
Open it
And grant Root access
and modify according to your need
My settings
Cpu max frequency 1170Mhz
lowest 299Mhz
Cpu governor Interactive plus or ThunderX
Enable Option Start At Boot and it will start working from next boot
ThunderX Kernel is now implemented in Big.Little Kernel
Is this only available for custom ROM ?
Ans Nope It is available for Flyme too
Download Link of all Custom kernel Available for different roms Choose wisely
For Flyme 4.5.4I
ThunderX :good:
https://yadi.sk/d/X-IttS7R3GPkjo
For Flyme 6.7.23.8 :good:
Big.Little
https://yadi.sk/d/ZP_lV5TG3GXxf3
For Flyme 6.7.4.11G [Beta]
Big.Little
https://yadi.sk/d/er4snR0w3GuTp7
For Flyme 6.1.0.0G [Stable]
Big.Little
https://yadi.sk/d/Zyg2pusl3K45rB
For Cm12.1 :good:
Big.Little
https://yadi.sk/d/V_9jHzkI3GZZAr
Lineage OS (0.4) :good:
Big.Little
https://yadi.sk/d/79Ha6NU83GZYVb
Lineage OS OMS Edition/V5 :good:
Can Be Used With Rom 7.1.2 Lineage OS 14.1.0 too
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlX254OVB5cEM2Zm8/view?usp=drive_web
XOSP Xperia Open Source Project Custom Kernel :good:
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlMkRGb2pGcWxaS1E/view
Xenon HD Custom Kernel :good:
Big.Little
https://drive.google.com/file/d/0Bz6Fq2POoJTlM0RaQVR6dFRPYUE/view
CrDroid Custom Kernel :good:
Big.Little
https://drive.google.com/open?id=0Bz6Fq2POoJTlT2duQ3VjV3BSdlk
Aosp Extended Custom Kernel :good:
Big.Little
https://drive.google.com/open?id=0Bz6Fq2POoJTlOG9HYk9GU0RmVFE
Resurrection Remix 5.8.3 Custom Kernel :good:
Note:This Can Be Used With RR 5.8.3 Compiled from source by Crezil 1
Big.Little
https://yadi.sk/d/tZBEK4aU3HKumm
MIUI :good:
MIUI8 8.1.3.0 Global latest stable
ThunderX
https://yadi.sk/d/Z8cciroC3GHjcG
MIUI8 7.1.1.2
ThunderX
https://yadi.sk/d/WeTx3Ya43FoXtS
MIUI 7.6.8
https://yadi.sk/d/rz7H6bNF3K43Hk
Kernel Sources
Get it here!
https://github.com/divis1969/android_kernel_meizu_meilan2
Dont Liked This Kernel? Simply restore your backup
How to Take Restore a Backup? See Below
1)Boot To Recovery (TWRP Suggested)
2)Go to backup and restore menu
3)Select Restore
4)In Menu Just Select Backup file of Boot.img
5)Just Tap on it swipe it and restore your backup :fingers-crossed:
6)You are done
Credits Goes To Our Beloved Custom Kernel Dev Qus1
Hit Thumbs Up :good: :good: if you found this useful
Suggestions Are Welcomed :good:
Comment Down your Opinion :good:
Regards~
Murtaza Piplod
Bootloop
Hi, I have the rom 7.1.2 Lineage OS 14.1.0 - Nougat Source 2017 installed on my Meizu M2 mini and when I try to install this custom kernel I go the recovery, install the zip and then wipe dalvik & cache but then when I reboot to the system I always get a bootlop and I need to restore the original boot. Any idea of what's the problem? Thanks
I installed it on CM12.1 v0.13 but now how to change vibration intensity?
Edit: Okay got it, from ThunderZap app
how to get this????
Resurrection Remix-N-v5.8.5 L-ROM.RU for MEIZU M2 Mini VIP.
Link: http://l-rom.ru/topic/254-resurrection-remix-n-v585*-l-romru-for-meizu-m2-mini/
techno_crysis said:
how to get this????
Resurrection Remix-N-v5.8.5 L-ROM.RU for MEIZU M2 Mini VIP.
Link: http://l-rom.ru/topic/254-resurrection-remix-n-v585*-l-romru-for-meizu-m2-mini/
Click to expand...
Click to collapse
Apparently our dear friend lunik loves to keep his work for himself and brag about it. He's afraid people will post it elsewhere (i.e xda) and all people will go to these websites except his.
TL;DR: Befriend him
What about battery life with this kernel? How many days phone work on single charging? SOT - how many hours?
S_O_L_92 said:
What about battery life with this kernel? How many days phone work on single charging? SOT - how many hours?
Click to expand...
Click to collapse
I'm on CM 12.1 using this kernel and the battery lasts all day with average usage. With intensive usage it barely finishes the day
I don't know how to install the kernel.
Charistom said:
I don't know how to install the kernel.
Click to expand...
Click to collapse
You have to flash the zip from twrp.
All links got restricted why?
adarshm4you said:
All links got restricted why?
Click to expand...
Click to collapse
Qus 1 account deleted from yandex :/ I can't help in this
murtaza1326 said:
Qus 1 account deleted from yandex :/ I can't help in this
Click to expand...
Click to collapse
Just want to try miui 9 beta u posted.I didn't have that custom kernal.Its ok.
murtaza1326 said:
Qus 1 account deleted from yandex :/ I can't help in this
Click to expand...
Click to collapse
I think that account is not deleted.I can download kernel from cm 12.1 post.
adarshm4you said:
I think that account is not deleted.I can download kernel from cm 12.1 post.
Click to expand...
Click to collapse
i don't know he said me in pm :v that his old files are no longwr available and his account is deleted
may be he created new one
Tweaked as you said.What you mean by brightness will be reduced?I didnt experienced it.No much idea about this customing yet.Atleast I tried it now.I didn't find thunder x in cpu governor.Only interactive I found.Can you share some more settings that i can easily and safely done in kernal adiutor.As you said I am taking much caution on every step I do in it.I know if something gone wrong,my phone will be dead.
Sorry am commenting on a wrong forum. There is no Thread for my phone. Without a custom kernel, can someone flash Nougat ROM. I am using Gionee to be precise. I have tried many Nougat ROM but none of them booted.
Please help.
blogthetech said:
Sorry am commenting on a wrong forum. There is no Thread for my phone. Without a custom kernel, can someone flash Nougat ROM. I am using Gionee to be precise. I have tried many Nougat ROM but none of them booted.
Please help.
Click to expand...
Click to collapse
You can flash noughat if the rom is supported by your phone but in most cases it will not bootup if you don't have custom kernal.
Pretty good!
Hi guys,
New account so i cannot post this one in ROM thread.
Because mido was discontinued in LOS15-16, I decided to build the ROM myself following the tutorials on lineageOS wikis.
Even the official ROM has resumed work, i still continue (just in case ) to maintain my own unofficial ROM.
Everythign works, even goodix (it's Pie version, not Q) and i have setup OTA updates to make it easier for a daily use to everybody.
Last ROM is from today , december 2d 2019.
LINK : After some posts (new account)i will be able to post the link but for now just search for Pie4mido on sourceforge.
I will update at least 1x per month for the security updates, more if I can (these days 3-4 times per week).
Enjoy !
Security patch for december 2019 is included in my new build, just for information
Again, january patch is included !
Appreciated man
Great, thank you!!!
Thanks for your messages
Update with february patch is also online :
https://sourceforge.net/projects/pi...ge-16.0-20200211-UNOFFICIAL-mido.zip/download