ASUS ZE550KL - My phone is the god to failure =] - Zenfone 2 Laser Q&A, Help & Troubleshooting

Hello everyone,
First of all, I apologize if this post is in the wrong section. Also I'd like to say how awesome it is everyone that is involved in these projects.
My Issue is I can't get ANYTHING to work, I have tried so many roms that apparently work for my phone and I always, foot errors, signature errors though the adb. I have tried every program to unlock bootloader but apparently does not work unless you are running V2 551 2.40.*.* so I went and downloaded this, and wants again can't flash the ROM. The unlock bootloader was weird, I went through all the installation and I don't even know if it worked to be honest. I can boot into the phone via power and volume down, and get a menu that includes, apply apps from ADB, wipe/restore phone, fastboot mode * which goes as far as my phone saying *FASTBOOT !!!* then thats it will not continue. The power and volume up does the same thing. So basically I'm starting to think this piece of crap phone will never have a decent operating system on it. The phone is in developer mode and USB debugging is on also. * Basically have done every single tutorial I can find and nothing works*. Also the twrp doesn't even work. I have even tried flashing back to an older version on the phone and get the same ADB errors. I have installed all the ADB and also minimal adb and fastboot and all drivers for the phone as well. * TRYING NOT TO MISS ANYTHING*
My phone specs:
Model: ASUS_z00LD
Android: 5.0.2
Baseband Version: 202c10_10.0.0_160120
Kernel: 3.10.49-gec27b65
Build: LRX22G.WW_user_1.17.40.1106_20160202044030520_2015052101030010000300001
IMAGES:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hope it works
Did you try to unlock bootloader the official way? I myself unlocked the ZE550kl following this thread http://forum.xda-developers.com/zenfone-2-laser/general/ze600kl-official-bootloader-unlock-t3273263
You can check if bootloader is lock or not from fastboot by entering "adb>fastboot oem device-info" should show up somewhere between the lines "Device unlocked: true"
After unlock only then you can install Official recovery TWRP 3.0.0-0 from here http://forum.xda-developers.com/zen...recovery-twrp-3-0-0-0-touch-recovery-t3317513 .
If needed TWRP will also help you root your phone once is installed.
Good luck!

Related

Nooblet - Need help with my 1+2

Hi,
I bought my phone from Aliexpress. I am very happy with it, but I am facing some issues:
It was pre installed with some diffrent kinds of bloatware.
- Baidu Browser
- DU Battery Saver
- DU Speed Booster
And more see picture -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From time to time it tries to download some kinds of files. Seems to be Bloatware aswell. See picture -
In addition to this, the phone also fails to install update: OxygenOS 2.1.1.
I get a message after the reboot, that the install failed, click to reboot.
I've tried to follow this guide "youtube . com/watch?v=-IGDZxeFHAc" with out hope. Most likely something that I am doing wrong.
I have managed to:
Click the RunMe bat file
Install USB drivers
Unlock bootloader
When I try step 4 Flash TWRP Recovery I get to the following message: " Did you see the "okay", then congratulations you have flashed in the recovery "
I did not see the Okay message, and when I press THE any key to quit and boot to recovery, nothing happend its just stuck on Fastboot mode.
Please if anyone could help me I would be very greatful!
Kind regards ..
Kissfiss
kissfiss said:
Hi,
I bought my phone from Aliexpress. I am very happy with it, but I am facing some issues:
It was pre installed with some diffrent kinds of bloatware.
- Baidu Browser
- DU Battery Saver
- DU Speed Booster
And more see picture -
From time to time it tries to download some kinds of files. Seems to be Bloatware aswell. See picture -
In addition to this, the phone also fails to install update: OxygenOS 2.1.1.
I get a message after the reboot, that the install failed, click to reboot.
I've tried to follow this guide "youtube . com/watch?v=-IGDZxeFHAc" with out hope. Most likely something that I am doing wrong.
I have managed to:
Click the RunMe bat file
Install USB drivers
Unlock bootloader
When I try step 4 Flash TWRP Recovery I get to the following message: " Did you see the "okay", then congratulations you have flashed in the recovery "
I did not see the Okay message, and when I press THE any key to quit and boot to recovery, nothing happend its just stuck on Fastboot mode.
Please if anyone could help me I would be very greatful!
Kind regards ..
Kissfiss
Click to expand...
Click to collapse
Download the latest stock firmware from http://forum.xda-developers.com/one...rs-official-oxygen-os-roms-ota-t3209863/page9 and flash that using TWRP. Accessing TWRP after flashing it using fastboot is volume down and power. There flash the stock rom, and it should give you a fresh new OP2

Need help, after downgrade and official update

Folks, after a successful downgrade to 6.01 and re-lock the bootloader, i can install all ota's, but the one thing is, that the device will always stays on bootloader after reboot. Right now, i am on the latest MM and will update now to N. Everything works fine. This device must be locked.
I need manually press "START" to reboot into system or recovery mode.
I want to stay on originally software. How can this issue be fixed?
Try connecting your device to your computer, then whilst your device is at the bootloader, in the adb terminal on your computer type 'fastboot oem fb_mode_clear' (without quotes). This may allow your device to reboot properly.
echo92 said:
Try connecting your device to your computer, then whilst your device is at the bootloader, in the adb terminal on your computer type 'fastboot oem fb_mode_clear' (without quotes). This may allow your device to reboot properly.
Click to expand...
Click to collapse
Good job, works, right now
After the latest update to 7.0/NPJ25.93-14/16 it shows instead logo, ID=Bad key, this device is unlocked bla bla bla, but it isn't. Once i did this serveral month ago, it works but not now. MM does not shows a bad key.
i know i can flash a logo to cover this but it should be in original state. Screenshots follows_
After the latest update to 7.0/NPJ25.93-14/16 it shows instead logo, ID=Bad key, this device is unlocked bla bla bla, but it isn't. Once i did this serveral month ago, it works but not now. MM does not shows a bad key.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can someone help?
Gesendet von meinem Moto G (4) mit Tapatalk
No need to worry about,
after N update, everyone's phone has "bad key" ..
Just ignore it, it's nothing..

Redmi 4 pro no longer wants to turn on -_-

Hello community ,
I install TWRP on my redmi 4 pro for the flash,
but when I finished the installation I clicked on "erase system" on TWRP
I only want to re-flash but it does not work
just the MI logo appears on the screen and it isturn off
I can put it in FASTBOOT and never in DONWLOAD MODE :crying:
I tried the software miUnlock download and adb commands but still nothing
Help me please
NB: I have already received the XIAOMI unlocking SMS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is still locked or you don't the false, false, false? After oem info it said failed and then try flashing twrp makes no sense
Reflash stock fastboot rom with miflash or use a deep flash cable. And then unlock it correctly
If nothing works you have to open your device and use testpoint method.
really nothing works.
miFlash gives me an error in red.
I already tried with the flash cable qualcomm but the phone when it vibrates it displays the MI logo and is off.
I tried recovery twrp.img but still the same error message
Method MiFlash:
Rom FASTBOOT for Redmi 4 prime: markw_global_images_V8.5.4.0.MBEMIED_20170925.0000.00_6.0_global
------------------
------------------
-------------------
Fastboot method won't work as your bootloader is locked. Try with deep flash cable or test point method.
Trying to flash twrp also not gonna work.
kibria.mgk said:
Fastboot method won't work as your bootloader is locked. Try with deep flash cable or test point method.
Trying to flash twrp also not gonna work.
Click to expand...
Click to collapse
I tried the deep flash cable:
click on the + and - button of the volume
plug in the phone and click on the button of the deep flash cable until the phone vibrates ... except that ... when it vibrates it displays the MI logo and ends ... but it is visible on the manager peripheral
Don't use "wipe_all_except_storage".
Use wipe_all only.
N1ck474 said:
Don't use "wipe_all_except_storage".
Use wipe_all only.
Click to expand...
Click to collapse
You can explain to me please
Nobody can help me?

Issues returning to stock

Howdy everyone...
OnePlus 7t Pro McLaren edition (International Edition **NOT T-MOBILE**)
Model: HD1913
Current Software Build: Oxygen OS 10.0.5.HD01AA (OTA update when I first unboxed).
I am having issues trying to return to stock. I rooted the phone with a combination of a couple guides found here (https://forum.xda-developers.com/7t-pro/how-to/10-0-3-patched-boot-image-oneplus-7t-pro-t3986351 and . I noticed after doing that I was missing the stock Oxygen apps and my build information was missing data. Not a huge deal, but I need to wipe the phone and start from scratch anyway, for other reasons. I decided to go back to stock if I have to redo everything anywhere.
First thing I tried, I got the stock firmwares (https://forum.xda-developers.com/7t-pro/how-to/oneplus-7t-pro-repo-oxygen-os-builds-t4003455). And this is where my issues started. My software build is weird... I have the HD1913, however my software build is HD01AA. Per that post, I should have HD01BA. I grabbed both of them for giggles, put them on my storage and booted into TWRP. Tried to flash the HD01AA (since that was what I have now), and it failed. Tried the other one, same issue. I'm getting a bunch of errors while trying to mount the system ("System unable to mount: invalid argument").
Second thing I tried, was to use the built in software update that OnePlus says to use (through the system update). It wouldn't install them (surprise).
Third attempt... Using the MsmDownloadTool (https://forum.xda-developers.com/7t-pro/how-to/op7tpro-unbrick-tool-to-restore-device-t4002909) I downloaded both versions cause I don't know which to use, and followed the instructions to get the phone into the mode. Turn the phone off, hold the vol up button and plug the cable in (very simple). It shows up connected in the software. Exactly 5 seconds later, the phone reboots and boots normally... I repeat this process aprox. 2.3 million more times. It does not matter what USB-C cable I use, the port on my computer, or how long I hold the buttons. The phone will boot into the download mode (or whatever it's called) show up as connected in MsmDownload and then reboot.
The phone works. I am still able to boot it up.... All I want to do is get this phone back to stock. I don't HAVE to, but now that it's fighting me, I have to beat it...
imgur.com/a/KhBGwao
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Okay - After sacrificing an iPhone to the Android God, I got it.
Instead of using the button combination to get into EDL Mode, I found an article that gave an adb command (adb reboot edl) to get to it. It did not reboot this time, and I was able to flash HD01BA to it, which matches what the phone should have...

so i destroyed my 6t for good.

so i took some break from android for couple of years and it seems somethings have changed since then, i had oneplusone so rooting wasn't new to me, but i got my oneplus 6t rooted it straightaway i had some issues with TWRP not sticking after i flash and had some issues were i couldn't find the directory to install roms but all that was fixed, had some other isues with using my banking app but that was sorted a swell so i was having fun.
a mouth or so ago i was wanting to get rom and my TWRP wasn't there it kept rebooting into fastboot menu, so i tried to flash TWRP again and it wasn't working so i messed up with boot img with all sorts of command lines related to flashing boot img, now my phone is dead for good i don't see how it can be fixed when the boot is corrupted i cant even boot into fastboot.
when i tired to boot into fastboot it wont work it stuck in that unlocked bootloader screen i have tried every combination available and it reboots into that. please help if you can.
please if i didn't explain my self properly ask away i just forgot what i did it been a while.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try MSM tool
As mentioned, neither Fastboot or recovery need to work for the MSMTool to work.
Volume Up + Power while turning on will boot to fastboot.
Volume Down + Power while turn on will boot to recovery.
Holding Volume Up + Power should force the phone to turn off.
Volume Up + Volume Down should put your phone in Download mode for the MSM Tool.
Note the screen wont do anything, the phone will just be recognized by the MSMTool.
Dafelleant said:
Try MSM tool
Click to expand...
Click to collapse
you guys have no idea how great full i am its finally working from dead phone in the storage to daily driver.. again you can always rely on xda members.
Yeah, OnePlus is one of the only phones that is truly un-brickable. Even Google pixels do not have working MSM tool.

Resources