Related
hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues
I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?
I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk
Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.
The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?
Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.
Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers
Hi All,
I'm about to attempt to upgrade my Harley RoadGlide's radio.
REEAALLLY like the fact that it will be a all-in-one solution (GPS/Radio etc)
Here is the plan:
Joying 8.8" 4gb /32gb Android 8 unit
Adaptor for 1 DIN radio ( Harley factory is a off the wall size more like a 1-1/2 DIN )
Module to retain handlebar controls (Works like a steering one)
Marine amp (with the remote power on a manual switch so I can shut the speakers off)
Bluetooth transmitter to send music to headset if needed
Before anybody points out the obvious, yes I know the unit is not marine grade..
This leads me the my first question:
How much heat does the display generate?
I was thinking on taking the bezel off, wrapping the whole back in vinyl up and over the edge of the glass and then putting the bezel back on. This would seal the display part since there is not reset/mic/pwr holes in the glass..
Mating the display with the body will be thru a custom device with seals to prevent water getting in at the connectors.
As for the "main" body it is pretty much protected being in the fairing. I will need a heatsink/fan but I think it will be ok.
Now on the operational question:
Can a bluetooth headset be connected directly to the unit? (For listening to music)
Any tips/advice?
Anybody ever done this?
Thanks !
Ok.. just ordered the 8.8" single din 4gb model.
Was 25% off. Black Friday sale. What can go wrong ??
Good thing about that model is that it is solid glass.. no reset/mic holes.. should make it easier to weatherproof.
The fun will begin when the unit gets here.
Lots of config/testing to do before I shoehorn that puppy in the bike.
I'll post pics if people are interested.
Been testing a couple of GPS apps on my tablet right now ahead of the integration and so far Sygic and Osmand are the best I found. Following a preplanned route is a must( ie to not deviate from the plan) , so if anybody has insight please point me in the right direction ?
Patiently awaiting the arrival of the unit...
The beast is here!!
Just received my unit ?
Got to say it is very well packaged
Will setup and start the testing soon.
Stoked!!!!!
Update/ Questions
Hi All,
Well.. the testing is going well.
So far i am able to get all my music audio to the Bluetooth headset by using a transmitter connected to the RCA output.
I had to use an external USB power for the dongle because the transmitter is "recognized" as a USB keyboard by Joying
I am using the soft button on the unit to turn the amp on/off when I want to use the headset.
I am able to use ZLink as well to connect the phone to the unit.
To have the headset capability for phone, I need to have the headset paired with the headset first.
Then I connect the phone to the unit using ZLink/Android Auto on 1 USB input
I can use the radio's display to control the phone and make calls.
All audio/mic is done by the headset. Yeah!
Only 1 problem.. The Joying keeps on wanting to connect Bluetooth to the phone.. Pops a request every so often..
Any way of turning this off? Only happens when Zlink is active...
If I connect the radio to the phone, it kicks the headset off...
Any way to disable Bluetooth entirely on the unit?
Unit is now rooted and I have installed JET.
Waiting for my handlebar controls converter in order to test "steering" functions.
Cheers!
Junior_1967 said:
Any way to disable Bluetooth entirely on the unit?
Click to expand...
Click to collapse
Can't you do that from the settings? Simply switch off Bluetooth?
Or is that when Joying keeps nagging to switch on Bluetooth? ("wanting to connect" can mean to connect because BT is active, or first wanting to switch it on and then connect)
I tried..
The Zlink app automatically turns bluetooth on I believe.
The bluetooth is off in my Joying settings.
It only happens when the Zlink window is "active"
So when I first connect I press cancel on my phone when the request comes in.
All good until I minimize the windows then re-activate it. Then another request comes in from the Joying unit...
I tried to disable the bluetooth in the app settings and Zlink refuses to open.
There is no "access to bluetooth" in the Zlink app settings..
Really more of an annoyance then anything else as I can just cancel the request...
Would really be nice to have some decent bluetooth settings on the unit to be able to connect any devices or change settings.
Or have some ZLink settings to not start bluetooth on demand since it's already been taken care of by the headset...
Thanks for the suggestion
Cheers,
Problem solved! Android Auto using headset instead of Radio for audio
Hi have solved the problem of Bluetooth wanting to connect all the time.
Solution: First time the popup comes in on the phone when connecting USB to the radio (I used Headunit Reloaded but ZLink should be the same), accept and enter proper password (0000)
Once connected, on the phone Bluetooth settings change Joying Radio to No Phone, No Media.
The next time it will not ask to connect and won't kick out the other Bluetooth (Headset)
Android Auto has to be in developers mode to not care which Bluetooth it is using:
To enable it, open the Android Auto app on your phone and choose About from the left menu. Tap the About Android Auto header text about 10 times and you'll see a prompt to enable developer options. Accept it, then hit the three-dot Menu button and choose Developer settings-> Application mode "Developer"
On to the next challenge!
Cheers!
This sounds interesting. Any pics on the install?
Yes pics please, what are doing are weather proofing the head unit or are you a fair weather rider
Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri
Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri
Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!
Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314
Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri
Hey Guys,
i have my head unit now for about 3 Months and i costumized everything i could including the Factory settings!
I have some problems where i cant google a solution or couldnt find one by myself:
First and the biggest for me:
The Bluetooth CallApp sucks - i can't sort by first name - its only sorted by last name
Is there maybe a ther app i can install?
Second Problem:
I cant finde or activate the Developer Options - tried every app on the playstore! not working
- a less big problem - i would love to get it done - but i dont see a chance someone can help me with that...
In the Factorysettings under the Tab Canbus ill have 2 Options that kinda work for me.
78_Jeep
and 48_Jeep
on the 78 Setting, i have all the Settings for my car in the Menue (light, brake etc) but with this setting my steering wheel app dosnt work. it only has a few "preset options"
(Yes i changed the Steering Wheel Canbus Type)
With the 48_Jeep Seetings the Steering Wheel app functions perfectly and i like how i can costuomize it, but the "Settings" app is gone - and my rearcamera curve strings are gone
So is there a way to use the 78_Jeep canbus type but for the steering wheel the 48 settings?
i appriciate every help and if someone needs more details - i will provice everything!
no one? This section of xda even alive?
EGOiST1991 said:
no one? This section of xda even alive?
Click to expand...
Click to collapse
Yes, this section is very alive.
You do not mention which kind of unit you have, which android version, etc, etc. That is like mentioning "my computer doesn't work anymore. Help".
If you have an MTC unit you might have luck in the MTC threads. There are multiple custom roms also having bluetooth mods, but BT mods are really hardware and MCU dependent. There is no such thing as a good BT app.
Developer options: On some units the settings app has been recompiled removing quite some options like developer options or bluetooth settings.
Jeep canbus settings: You can only hope for a Jeep owner to react. Besides: there are so many units. Mentioning the 78 or 48 jeep version might be specific for one type unit that nobody has.
Everything you mention is not on my units.
surfer63 said:
Yes, this section is very alive.
You do not mention which kind of unit you have, which android version, etc, etc. That is like mentioning "my computer doesn't work anymore. Help".
If you have an MTC unit you might have luck in the MTC threads. There are multiple custom roms also having bluetooth mods, but BT mods are really hardware and MCU dependent. There is no such thing as a good BT app.
Developer options: On some units the settings app has been recompiled removing quite some options like developer options or bluetooth settings.
Jeep canbus settings: You can only hope for a Jeep owner to react. Besides: there are so many units. Mentioning the 78 or 48 jeep version might be specific for one type unit that nobody has.
Everything you mention is not on my units.
Click to expand...
Click to collapse
I am Sorry - you are total right! I will provide the Info today! My bad!!
Attached the infos i promised.
Can you help me out mate? At least with the developer options?
EGOiST1991 said:
Can you help me out mate? At least with the developer options?
Click to expand...
Click to collapse
You have an MTCE unit. The experts on those units are in the MTC sub-forum, not in this sub-forum.
@ikerg, @typos1 and @marchnz are the MTCE experts. If any, they can help you. ( there are more, sorry if I can't name them from the top of my head, but these 3 also regularly "visit" this subforum)
EGOiST1991 said:
Attached the infos i promised.
Click to expand...
Click to collapse
Hello sir!
I too have a Jeep Renegade (2015 though) and am currently ironing out the kinks of my new radio.
My unit is a Dasaita HA-5288-v940 , PX5 w/ Android 9.0 and I have to use the same canbus settings
as you to acquire steering wheel control.
One thing that did help me with my steering wheel keys was using the settings built into the FCC Launcher.
There was an option to switch the steering wheels keys from like 'SW'? to CANBUS. Selecting CANBUS allowed
me to map my keys correctly. I left my canbus vehicle selection to the same one as in your picture (Simple).
Note: you can verify if this is the maker of your canbus by taking a peek at the decoder.. it will be made by
'Simple' or 'High' etc..
FCC is the first 'headunit specific' launcher I've tried.. but playing around with it
resolved a few jeep specific issues. Eventually I'll throw Nova Launcher on the thing when everything is working.
I am currently trying to figure out why I can't hear call audio, but can hear ad2p without issue...
My BT module appears to be a GOC-MD-705D and has to use the WQBC6 module (from what ive tested).
Callers can hear me, but I can't hear anything My harness wiring is labeled for a 'CHEROKEE', but I've
confirmed with Dasaita that I appear to have the right harness. Their support from their official ebay
store have been really helpful. I'm super hoping to resolve the lingering issues I have.
I have spoken with Dasaita support about my issues and through the conversation I have been told
that developer options has pretty much been removed. =/ I was hoping to see what bluetooth codec
was in use and see if me matching it on my mobile would resolve the audio issues...
By all means if you've resolved any issues Jeep specific send me a message??
I've had my unit for maybe 1-2 weeks now and seem to be making things a 'little' easier with every change.
I'm going to look into Viper4Android to help with some audio improvement and hoping to find a better
'bluetooth dialer' application that is better than the factory installed one.. I am totally new to the head unit
world, but trying to learn as much as I can.
I'll try and remember any specific Renegade tweaks that have improved things for me and send you a message?
I can't tell you how relieving it is to find another Jeep Renegade owner who gave U-Connect the boot..
@broach4313 I know it’s only simple but for the Bluetooth audio that you can’t hear have you tried making a call and then when the call has been answered then increasing the volume? It is a separate volume for a Bluetooth call and I had the same problem a few week back, then I remembered I turned the volume down for some reason when I was playing around with it.
@broach4313 I know it’s only simple but for the Bluetooth audio that you can’t hear have you tried making a call and then when the call has been answered then increasing the volume? It is a separate volume for a Bluetooth call and I had the same problem a few week back, then I remembered I turned the volume down for some reason when I was playing around with it.
This worked for me : factory settings, type code ADBON and press enter/complete. Developer options menu then appeared. (PX5, 4gb, Android Pie)
ab1702 said:
@broach4313 I know it’s only simple but for the Bluetooth audio that you can’t hear have you tried making a call and then when the call has been answered then increasing the volume? It is a separate volume for a Bluetooth call and I had the same problem a few week back, then I remembered I turned the volume down for some reason when I was playing around with it.
Click to expand...
Click to collapse
From what I see the volume is up. I can hear music via bluetooth when its played over a2dp. I appreciate the help though!
I just updated to the most recent firmware for the unit. Not change though.
broach4313 said:
From what I see the volume is up. I can hear music via bluetooth when its played over a2dp. I appreciate the help though!
I just updated to the most recent firmware for the unit. Not change though.
Click to expand...
Click to collapse
The volume on a2dp music and on Bluetooth calls are 2 different things.
Try making a call in the car when your Bluetooth is connected to the unit, then when the call is answered then increase the volume on the unit. You might find the volume is currently on 0.
ab1702 said:
The volume on a2dp music and on Bluetooth calls are 2 different things.
Try making a call in the car when your Bluetooth is connected to the unit, then when the call is answered then increase the volume on the unit. You might find the volume is currently on 0.
Click to expand...
Click to collapse
Nope, volume is up. I generally only see a single volume meter (sort of goes for everything?) unless I go into the
canbus settings and then i see notifications, voice, bt etc... everything is up.
Just this one huge problem solved and I'll be happy thinking about rooting the unit to gain more control, but
not sure if this is a software issue or maybe wiring related to the harness. I'm out of ideas. :|
Hi there,
I am new to this forum and have recently installed an idoing version mtch px6 with ZLINK for andoid auto.
First question. My ZLINK version is 4.0.41.4. How do I know if this is the latest version? The resolution on ZLINK looks very enlarged and not very elegant. I was hoping it could be updated to improve the resolution.
2nd question - Whenever I make a phone call, my audio stops working. The person I call can hear me, but as soon as I press the call button, the audio cuts off (there is no typical ringing sound and I cant hear any voice). Obviously the mic is working fine as the other person can hear me well.
3rd question - Randomly my right speakers will stop working. It isnt a speaker issue as they were fine before the idoing installation. Maybe its a connection issue in the back of the headunit OR there is a issue with software.
Any help would be really appreciated!!
Cheers,
Julian
Not Android-auto.
Op, also no one will know what your unit is without posting details including screenshots from Android system information. The first point of contact being the reseller of device, what do they suggest?
Requested moderator move to (Android head-units) forum