900T Root (4.4.2 UVU1CNK2) - Galaxy S 5 Q&A, Help & Troubleshooting

Hi all, just acquired a 900T on 4.4.2 UVU1CNK2. Planning on installing CM13 but first a few questions:
1) Should I OTA update before rooting and installing CM to update the baseband version?
2) If not - what is the easiest way to root on this version? (I've read about towelroot, through odin, etc - just wondering what is the most up to date way)
Thanks!

If you want to install CM13, I think you have to fully upgrade your device to 5.1.1 to get the new modem and boot loader.

Related

Would like advise on installing stock kitkat rom on my S4 i9505

Hi,
I would really appreciate some advice on installing the latest 4.4.2 update on my S4 i9505.
I've been using the MIUI CM rom the last few days but have found it too buggy (it's actually getting worse with updates).
I've also tried installing the Samy Delux rom, although it installs it just won't boot.
My phones boot loader is currently unlocked (no knox, early version of 4.1.2), I know if I install the new OEM rom it will install a secure bootloader.
Can someone please advise if my phone can be rooted if I install the latest rom for my phone and what the process is.
In the past I was able to install a stock rom pre-rooted, but from what I've read on forums that's no longer possible ??
Any advise would be appreciated.
you can root 4.4.2 but you will trip knox
and you can flash Pre-rooted Roms via Recovery

Question on rooting 5.1.1

Hi. I have a couple of questions on rooting my Note 4.
I'm running unrooted stock 5.1.1 on my SaskTel (Canadian) 910W8.
What are my steps to rooting my device currently? I see a lot of talk about using Odin to put the Bell firmware on, installing TWRP through Odin, installing SuperSU and installing a custom kernel but those instructions seem to imply I'm not currently on 5.1.1 or I'm already running a rooted 5.0.1 or earlier device.
Is there no easy chainfire type of method?
I just basically want to run stock rooted 5.1.1 on my device.
Thanks.

Is there a problem if i update to latest stock rom?

Hi,
i want to buy a new note 4 - the version 910f.
If i update the new phone with stock 4.4.4 rom to the latest 5.1.1 - will there be any problem if i want to install root or anything like this later on? Can i still install custom roms?
I want to now this, becqause if i update my new amazon fire 7 (2015) to latest stock 5.1.1 rom - there is no chance to start recovery anymore for installing custom rom. With only 5.0.1 all is good and i can install custom rom with recovery.
Is there a similar problem with note 4 or can i install latest stock rom and won´t get any problems later?
Only thing i found is that i can´t go back to 4.4.4 when installing 5.1.1? And i can´t go back to 5 when i´m installaing marshmallow because of changing partitions size?
So if i go to stock 5.1.1 it doesn´t matter, because i don´t want to use 4.4.4 and i can still use all stock roms and change to marshmallow later?
Bib_x said:
Hi,
i want to buy a new note 4 - the version 910f.
If i update the new phone with stock 4.4.4 rom to the latest 5.1.1 - will there be any problem if i want to install root or anything like this later on? Can i still install custom roms?
I want to now this, becqause if i update my new amazon fire 7 (2015) to latest stock 5.1.1 rom - there is no chance to start recovery anymore for installing custom rom. With only 5.0.1 all is good and i can install custom rom with recovery.
Is there a similar problem with note 4 or can i install latest stock rom and won´t get any problems later?
Click to expand...
Click to collapse
No problem if you don't plan to use 4.4.4. Note that if you update to latest 5.1.1
>your bootloader will be locked you can't go back to previous roms or use custom roms which are based on earlier versions such as 4.4.4 custom roms or 5.0.1 custom roms.
>you can still root your phone install custom recovery and install custom roms which have newer bootloaders. However rooting 5.1.1 is bit different because with android 5.1.1 there is an extra security layer in the kernel which detects and stops device from being rooted you need a "permissive kernel" to root 5.1.1. And then you can do whatever you like.
Would it be a better decision to stay on 5.0.1 for the moment and later install 5.1.1 custom rom? To not loose unlocked bootloader?
And one more question: if I deactivate bloatware in application setting off stock rom, is bloatware complete deactivated or is it still running in the background somehow?
Bib_x said:
Would it be a better decision to stay on 5.0.1 for the moment and later install 5.1.1 custom rom? To not loose unlocked bootloader?
And one more question: if I deactivate bloatware in application setting off stock rom, is bloatware complete deactivated or is it still running in the background somehow?
Click to expand...
Click to collapse
You can install 5.1.1 with these bootloaders coj3, coi3, pok1 , coh4 these are safe and won't lock your bootloader. i'd recommend 5.1.1 over 5.0.1 because the difference is day and night in long term use (when u have many apps) 5.1.1 is much smoother and better battery life just don't install coj5 or newer bootloaders. I don't use custom roms because in my experience stock rom is the best custom roms have some bugs etc. If you deactivate bloatware in application settings then its no more running in background.
OK, thank you. But so I should deactivate ota updates and flash latest stock update with Odin, so that I don't get latest locked bootloader?
How can i update to latest 5.1.1 update and keeping the (old) unlocked bootloader?
Do i have to donwload version from smamobile and flash with odin? How can i disallow to update bootloader too?
And if i update with ota - i will get latest (locked) bootlader automatically - no chance anymore to remove it?
-----------------------------
I don´t want to root my phone the first time (because of knox) but later on i maybe want to root too.
Bib_x said:
How can i update to latest 5.1.1 update and keeping the (old) unlocked bootloader?
Do i have to donwload version from smamobile and flash with odin? How can i disallow to update bootloader too?
And if i update with ota - i will get latest (locked) bootlader automatically - no chance anymore to remove it?
-----------------------------
I don´t want to root my phone the first time (because of knox) but later on i maybe want to root too.
Click to expand...
Click to collapse
There is no way to be sure if the older bootloader will work with latest 5.1.1 rom. So its better to stick with the bootloader which comes with the rom and yes if you update with OTA you will get latest 5.1.1 and bootloader automatically. Just go to sammobile and download 5.1.1 with COJ3, COi3, or POK1 (nordic countries). and Flash with odin.

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2

Install Custom Recovery Samsung Galaxy AT&T S4 SGH-I337 Ver 5.0.1 Non-Rooted. OK2
Hello, I Want to do some modifications to my Samsung Galaxy S4 and Have so many questions that I am not sure were to start? Yes I'm a noob but learning. I have a SGH-I337 phone that is unlocked so I use it for T-mobile. The phone came with KitKat 4.4.2 NB1 firmware but I managed to update it manually to the latest firmware OK2.
What I would like to do is install a custom recovery and install a clean non bloated Rom. Maybe a custom such as CyanogenMod? Questions: Is there any recovery software that will work on my present upgraded phone such as Safestrap, TWARP,PhilZ or CWM and in doing so I am guessing I need to root my phone first? When you root a phone does that unlock the boot loader? I have read articles saying you can only install custom recovery on the older firmware such as kitkat 4.4.2. or unless a update comes out. I also have read articles that I cannot downgrade and am not sure what that means as I have read articles that I can use Odin and reinstall my stock firmware NB1 is that true? Is there a way to downgrade your upgrades?
I see a lot of articles how to install recovery software but they do not always say what firmware version they are installing it to so I wont even try it. I am guessing-it is the older firmware 4.4.2.
I have read I can flash my kernel to an older Kernel such as NB1 then root it install a custom recovery then upgrade the kernel again? Not sure it I can upgrade or downgrade kernels that are for my phone?
I did manage to root my phone awhile back when it had kitkat 4.4.2 NB1 but had problems later on with my touch screen going crazy as if someone was in my phone so I brought it back to stock by using Odin and reinstalling NB1 firmware hoping to fix the problem. After installing stock firmware I decided to upgrade to lollipop 5.0.1 OB2 and that is were I am now. About my touch screen going crazy I have been reading it may be due to cheap USB chargers which I am using but that is another story.
Well any-help or leads would be appreciated.
Maybe if I wait long enough someone will come up with a custom ROM for my latest firmware as well as rooting it?
Steve

help - G900A a t & t GS5

hi
i purchased a unlocked at&t phone off ebay and it works fine but its on 4.4.2. i want to root and install new custom firmware based on the S6/7 rom - newest android basically that'll work.
What rooting guide should i use and whats the best rom to get it flashed to a UK based rom?
If you are on 4.4.2, do NOT take the OTA update. updating to the official AT&T Lollipop gets you an encrypted bootloader that is unlockable.
look for guides based on 4.4.2. you'll want to install a recovery, then you can flash custom roms.

Categories

Resources