Hi everyone!
For project to us came MT6572 Core board
To this board we need to connect a few additional devices, like ultrasonic range finder, some LEDs, few buttons....
How to connect all this stuff to this board?
Perhaps someone on XDA work with this board?
I have Android SDK, and documentations for this board, but nowhere described how to work with GPIOs, or how to connect my sensors...
How to work with GPIOs on Mediatek SoC?
Hi
Are you run this board?
i need some help on it.
how can i choose and connect a LCD to this board?
Please help me.
Regards.
Related
Subj. Does anybody research the JTAG way?
I have an information what pins on PXA272 are JTAG interface. But I don't know where it's pins traced out on mainboard. The separation of PXA272 from mainboard is impossible in my case(for a while).
Does anybody know JTAG pins on mainboard for ATOM?
What tools for PC can support JTAG? Can I make a LPT-device for the connection PDA to PC by JTAG?
Did you find jtag pimout yet ? I have the same problem as yours, dead atom !
Basicly, I've seen couple connector in PDA which I believe are JTAG pinout, I've seen it in ETEN and in Atom it seem placed near the simcard holder. You'll see eight gold circle contact on the PCB, I believe six of them are JTAG pinout.
But still can't find the info about those specific pinout.
Still find the soft, mostly run under linux needed in win
I guess JTAG is my only option for waking up my atom, so if you have any info regarding this matter, would you please share with me ??
Thank you
hi I need the x10 pcb schematic. Thank's
I don't think they release the pcb schematic of any smartphone. Why do you need it?
I need it to repair communication. I've already made a charging work but I don't know how to fix communication
I wonder if it is possible to mod the Rockchip 2926 (Cortex A9 AMLogic 8726-M3L) so that i have an OGT port.
What i mean is to find out what connectors are needed (so i can solder wires and a connector on them) to get OGT working
I did some searching on Google but could not find a proper datasheet of the soc. Was only able to find a pmu datasheet for RK29xx.
Was wasn't what i was looking for..
This is coming close, but once again i don't know what those Chinese people did but this chip in this datasheet is bga and mine is a ic with 'legs'(no bga).
I meant this datasheet
http://tabreview.ru/content/pdf_docs/aml8726-m3_quick-reference-manual.pdf
On google i could only find "8726-M3" and not the "8726-M3L" model of this soc.
This tablet will be used as small linux nas the device is a JXD S18 mini pad (2gb nandflash, RK2926 1x 1.0ghz (800mhz cpu 200mhz gpu ->mali 400 512mb geil ddr3 ram)
Images of the board
- Click here to view -
As you can see the realtek wireless adapter is usb connected on the board.
Help or advice is appreciated!
Hi Guys,
I got my hands on a broken access point and i’m trying to see if i can get it up again.
There are no visible uart or jtag ports on the board. Power seems to arrive at the rom chip and cpu (although i can’t verify the power pins)
The cpu is a Cavium CN5010-500BG564 where i’d like to find out the uart or jtag pins on.
I’ve attempted multiple google searches, but no datasheet with pinout can be found.
As a last resort i could try dumping and reflashing rom if no uart can be found.
Does anybody happen to have a datasheet for this mips processor ?
I can post some pics of the board if anyone is intrested.
Thanks
Hi,
I have an Ascend G7 touchscreen. I want to try interfacing it with a microcontroler (stm32f103 or f411). It has a chip on a flex pcb but the chip has no marking to identify it. Also the connector seems to have 10 pins.
I tried looking for he rom source code (to looks for provided drivers) on huawei website but it is not available.
Does someone know which chip is use ? Or have a working Ascend G7 with developer mode activated an would take a few minute to open a shell and get the driver's name ?
Thank you,
XWindless