My device is (or: was) running Google Lollipop, but with added root access. Tonight su told me that it needs an update, so it rebooted to TWRP, installed something, rebooted again, trying to load the OS, but got stuck in the boot animation. Now the only way to switch it off is via the boot loader.
Is there a way to regain control over the device, or should I just flash some custom Marshmallow instead? I already wiped the cache partitions, but with no avail. And I am not really satisfied with Lollipop, because very often it's acting like paralysed.
self comment: solution
I went to the SuperSU thread in this forum and found out that I am not the only one with this problem. A solution was to boot to TWRP, enter the ReadyToSomething folder and (re-)install some old version 2.46 of SuperSU which I found there.
System is running normal again, but SuperSU is constantly begging for a "binary update".
Related
Hi folks,
I recently rooted by N4. It was running Android 5.0.
I also have MultiROM installed, with CyanogenMod installed as a secondary ROM.
I didn't realise I couldn't apply the OTA updates to the stock Android system (my oversight), and I allowed the device to download and (attempt an) the recent 5.0.1 update from Google.
When the update attempted to reboot the device, I could see in the terminal data that popped up, that it failed.
After that device now gets stuck in the booting stage with the little coloured balls drifting around.
I continued to use my phone with the secondary ROM (Cyanogen) for some days until I had time to sort this out.
MY ATTEMPTED RECOVERY
I read that ordinarily on a rooted device one would manually apply the various image files from the full 5.0.1 package.
So, following instructions found here: http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Using method two (long method).
... In fastboot mode I flashed the system, boot, recovery, cache (after clearing cache), radio images from the 5.0.1 stock image.
At first I didn't flash the bootloader (as I wanted to maintain the multiboot loader I had installed) nor the user.img (I don't want to lose my user data). I read this should work. But it didn't.
When it came to booting into recovery mode to finish the process, an android icon with a ! warning on it would appear, and I could not do the recovery.
So, I have since flashed the bootloader also. That didn't change much, except that my dual-boot boot loader is now gone, and the device is still not recoverable.
Is there something I am not doing correctly? How can I recover this device so that it has 5.0.1, my existing user data, and my existing dual boot bootloader?
Cheers,...
May have solved it...
I'll post another update in a moment. Posting this just in case someone starts responding to my question in the interim.
After further fiddling around, I may have resolved this issue. I've managed to get it into recovery menu, rebooted from there, and device is now in "Android is updating" mode. Looking good.
Will post new message soon as to whether this was successful or not.
Issues continue
So, after the device booted a screen appeared for a fraction of a second, that appeared to be the screen for selecting system language (as per what happens when a device is first run after a clean install). But the screen almost instantly goes black except for the little network icon and battery icon and time in the top right of the screen.
If I use the power button to lock the screen and again to activate it, the screen very briefly flashed up the language selector, then goes blank again.
So... it seems something odd is happening after applying the 5.0.1 file.
Any suggestions?
Flash the 5.0.1 factory image with fastboot
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the 5.0.1 factory image with fastboot
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Well, this is what I resorted to doing. And it worked. Phone started and was as new. Of course, I lost my user data which is a ****. I did pull the SDCARD content over ADB, but am not sure how I'd go about pushing it all back on, into right locations, etc.
BUT—and it's a BIG BUT—when I re-rooted it and applied SuperSu, it couldn't be put into recovery mode any more. It would keep running through the SuperSu install process each time I'd attempt to go into Recovery.
I ended up ignoring this, and installing Busybox (with Play) and SuperSu.apk (via Play). But the SuperSU apk would keep saying its files needed to be installed/updated.
I forget the exact mess that unfolded, but eventually (after installing MultiROM) I could boot the phone as it would ALWAYS go into (custom) recovery.
So I starter the whole process again, with another clean install of 5.0.1, and yet now it is stuck at the bootloader (the little swirling balls screen).
AndroidWelcome said:
Well, this is what I resorted to doing. And it worked. Phone started and was as new. Of course, I lost my user data which is a ****. I did pull the SDCARD content over ADB, but am not sure how I'd go about pushing it all back on, into right locations, etc.
BUT—and it's a BIG BUT—when I re-rooted it and applied SuperSu, it couldn't be put into recovery mode any more. It would keep running through the SuperSu install process each time I'd attempt to go into Recovery.
I ended up ignoring this, and installing Busybox (with Play) and SuperSu.apk (via Play). But the SuperSU apk would keep saying its files needed to be installed/updated.
I forget the exact mess that unfolded, but eventually (after installing MultiROM) I could boot the phone as it would ALWAYS go into (custom) recovery.
So I starter the whole process again, with another clean install of 5.0.1, and yet now it is stuck at the bootloader (the little swirling balls screen).
Click to expand...
Click to collapse
Try a full wipe from Factory Recovery, and see if it will fix the bootloop.
Bootloop no more...
ariesgodofwar said:
Try a full wipe from Factory Recovery, and see if it will fix the bootloop.
Click to expand...
Click to collapse
(wiping the sweat from his brow...)
After many tedious hours of messing around with this beast... there is life beyond the bootloop.
Back to a stock install.
So, now I am wondering why the SuperSu/Root process didn't work on my last round on this.
The SuperSu installer would kick in EVERY time I went into Recovery mode, and would then reboot the phone. This made it impossible to do things with ADP because I essentially couldn't get into recovery mode. I wanted to push through some of the stuff I pulled using ADP before I wiped the phone previously.
I installed MultiROM (which includes TWRP [is that what it's called] recovery system. BUT then go stuck in a Recovery loop.
Not wishing to repeat that fiasco... does anyone more knowledgeable than I (not a difficult status to achieve) have any suggestions to what might have caused those issues?
Heya,
I decided to nuke my beloved OP2 and start anew, this time including encryption. As I read in the encryption Q&A, the device should not be rooted when doing the encryption, as this can cause havoc.
If you want, you can skip the Italic part. Lets just say, all went well until I rebooted into recovery after setting my encryption password.
- I wiped everything, installed Oxygen OS 3.0.1, flashed the TWRP recovery image (which was recommended in the "how to install oxy 3 on OP2" guide. So it should be a compatible version).
- I boot up my phone and go to the android security settings. I put my phone on the charger and let it encrypt my system with the on-board encryption function. Everything goes well, device reboots fine, now encrypted.
- I went to the security settings again to set my password. I check "ask this password before booting". Now that the encryption is dealt with, I want to have my device rooted. I boot up into TWRP and, as expected, TWRP asks for the password that I just configured.
BUT TWRP won't accept my password, telling me it was wrong. I tried several times, checked that I didn't mess it up because of a foreign language (english) keyboard. When I rebooted the device, it accepted my password on the first try, booting normally afterwards.
I went into the security settings and chose a pattern instead of a password, to make sure the keyboard wasn't the cause of the failure. When booting into TWRP, it asks about my pattern now. But it doesn't accept it.
So I went back into the security settings and unchecked the "ask pattern before boot" part, hoping that TWRP might not need the pattern anymore. When I boot into TWRP now, it asks for a password again, although I have enabled a pattern only.
I rooted my devices several times already, without any problems. This is the first time that I use encryption, so I have no Idea what could be the cause of this problem. It just seems that TWRP has problems decrypting the OxyOs. Please keep in mind that I used the TWRP image that was recommended for OxyOS 3.0.1 in the official Oneplus Forum install guide, so it should be compatible with all the Software and Hardware.
Now that I can't access anything with my TWRP, I haven't installed my SuperSU yet. I can't see how I can gain root access without using TWRP. If I rooted the device first and then encrypted it, the TWRP problem would not matter, but that's exactly the thing that causes HAVOC.
Looking forward to ideas
Fennec
Edit: My progress:
- tried adb sideload the supersu.zip over the stock recovery (update from usb). Protocol error. Installation failed.
- tried all kinds of TWRP versions, starting at the newest 3.0.2. TWRP 3.0.2 claims to have solved the encryption issue, but when flashed I get a bootloop whenever I try to enter the recovery.
- I realized that my adb sideload failed because I used an old version of adb which I found on my laptop. The newest version managed to sideload the supersu and the xposed framework, giving me root rights. TWRP still does not work but at least I got root now :/
same: TWRP can not decrypt system partition on One Plus One, CM-13 and TWRP 3.0.2-0
I remember TWRP said: installation was not successful although it can boot into recovery...
Try fastboot official twrp-3.0.2-2 for me is working fine.
Remember to boot in recovery after flash
Sent from my ONE A2005 using Tapatalk
Hello,
I am having some problems since today i flashed the su binaries over my completely new lineageos install. (a14.4, fully wiped before).
it was stuck during boot at the android logo(let it boot for half an hour, multiple times, no progress). so naturally i wanted to boot to recovery, though it would not boot into recovery with any imaginable key combo.
so i went into bootloader mode (which, in my case, is jsut download mode, no fastboot whatsoever, and yes, i checked fastboot devices, (also adb), nothing to be found there)
next, knowing i had no other choide at that moment, i flashed a stock rom, via download mode. worked so far.
stock rom was running (ics), bootloader was still download mode only, and recovery was now stock android rec.
my next step was flashing a custom rom, since this was the most important thing to get to working then.
via adb sideload i fashed lineageos, once again. was working fine, so recovery next. but nothing worked.
included with lineageos is root access, so i enabled all the stuff, incl. adb, on my phone. but adb sideload always spit out errors (code 7 or 255) on rec install (twrp 2.8.something touch.zip) [some error about /tmp/update.zip] trying cwm resulted in the same thing, like did flashing gapps.
pushing the files to the internal memory (/sdcard) did not help, since 'flash from sdcard' resulted in an empty sdcard folder with no files to install (in recovery. in the file explorer while running the os, the files where there)
then i tried rashr (not sure exactly which app it was) to install rec. it said everything worked fine, trying to install cwm. so i rebooted
and nothing worked. the rom would not boot anymore (again, stuck at android logo) since the stock recovery only allows for adb access in form of sideload, no push whatsoever, and sideload did not let me install the os via zip, it was back to flashing a stock rom once again.
so i did that again (this time lolipop)
this is where i am now:
the rom boots perfectly, like does the kinda stock recovery, but again: no files in the sdcard path within the rec menu, though i pushed them there, and they appear there in the file manager.
i installed root, for those neat apps, that maybe one would work, but they need root and the stock rom does not know how to give those rights to apps, no option found for this whatsoever.
also, download mode is gone. (still no fastboot)
when i try to boot the bootloader, i just goes on to usual os boot (key combo and adb reboot bootloader result in the same thing)
recovery is still working, but pretty useless still. when i try to sideload a file, it quits with failed verification of the file. which is no surprise to me, since it shows the message halfway through the send process (observed from the adb terminal on my pc, never gets even close to 100% before the message appears on the phone which also cuts the connection therefore the file send process.)
i have absolutely no idea what the hell will get this working again. i dont really care about the download mode, but what i really need is a custom recovery to finally work, so i can install all of my stuff again.
does anyone have any idea on what i could try next?
hopefully yours,
azyrael
SOLVED
so i noticed for root apps i need to install supersu (or something like this) to give root access to apps if there is no native way within the rom to do this stuff.
install supersu and found out i somehow had no root access at all. tried ioroot etc, did not work
so i installed a stock jb android rom, rooted the device via ioroot, install recovery via autorec, and it finally worked!
this took me only two days.
thx xda for providing all of the tools i needed for this <3
kinda unsolved
so, it got recovery to work. installation of lineageos also worked perfectly., though this bricks my device.
no matter what i wipe, installing a custom rom will stop it from booting. this could only be fixed by installing a stock rom again, which also reverses root and install a stock recovery. since i only need root and the rec for installing a custom rom, which does not work anymore, i wont bother with this anymore. i have abosutely no idea whatsoever, and tried everything even barely coming to my mind.
still open for suggestions, but the stock rom will have to suffice for now.
My phone was rooted for the longest time without any problems, but some time ago (I'm assuming after the Treble update) apps would not detect root, although any app that was already using root could continue doing so.
I checked Magisk, which said root was not installed. I booted my phone into recovery, and somehow my phone had the stock recovery flashed on it. I tried flashing TWRP on it again, and it worked. Except, when I rebooted my phone into recovery later again, it went back to stock recovery.
I have no idea what's going on, and would really appreciate some help.
(PS: I do know how to update my phone without the phone reverting to stock recovery, I've done it many times before, so that can't be the problem)
update: I tried flashing TWRP again (through bootloader), and this time I jumped straight to recovery. It showed all the directories as if my phone had just been completely wiped. Internal memory 0M. No files anywhere. Didn't even have a downloads folder.
In a panic, I rebooted my phone, but my phone was actually untouched, no data wipe whatsoever. I'm even more confused about what the hell is happening now.
The stock OOS will automatically reflash the stock recovery if it detects it has changed to something else.
You have to boot into TWRP right after installing it and either let it mount /system read-write (likely to cause problems later) or install something like Magisk that will prevent overwriting the recovery.
TWRP was not able to read your data partition, which can happen depending on which kind of encryption you have. Try the BlueSpark TWRP, it supposedly supports encryption better than the official one.
It's the version. If I use 3.2.3.0 or 3.2.2.0 I get no files. But 3.2.1.1 works for some reason. You can also install pie now. There is a link in the one plus 5 forums here to hydrogen os. It's Chinese version but that doesn't matter. It is in English. You will need to uninstall a few Chinese bloatware apps and flash gapps. But besides that I don't see much difference. If anything the hydrogen os looks nicer. I'll add some screenshots . Developer options was enabled from first boot, with the advanced reboot menu I noticed.
Also, if you have root the TWRP app can flash recovery from in the OS.
Fif_ said:
The stock OOS will automatically reflash the stock recovery if it detects it has changed to something else.
You have to boot into TWRP right after installing it and either let it mount /system read-write (likely to cause problems later) or install something like Magisk that will prevent overwriting the recovery.
TWRP was not able to read your data partition, which can happen depending on which kind of encryption you have. Try the BlueSpark TWRP, it supposedly supports encryption better than the official one.
Click to expand...
Click to collapse
It's frustrating for sure. Lol
Prior Info: Phone is rooted with magisk and bootloader is unlocked. Stock Pie Rom with pixelify Magisk Module and a couple of other modules installed.
Have been using AdAway for some time. Disabled it recently to watch some ads for games. Today switched it back on again. Clicked on Reboot after the prompt, and since then it is stuck in boot 'Android one' animation screen. It has been a few hours.
Is there any way i can get it working without loss of data? Tried booting into recovery (no TWRP, stock recovery only), there was no option to wipe cache, only factory reset.
Please help.
(ps. the phone memory was almost full, don't know if that info helps.)
Thank you all in advance.