Hi Everyone.
Please build CM12 (not CM12.1) rom with stock kernel for zenfone 5 with locked bootloader because I'm using 1.2ghz version, and after unlocking bootloader my phone hangs every minute. I don't force you to make it but please make it happen.
Many thanks from me & sorry for my bad english
There is AOSP 5.0.2 by tank0412 you do not need the unlock, but it contains some bugs.
Not have as many features as CM12 but is an alternative for those who suffer from freeze.
Ya I use that rom once, and I got audio & camera bug. So I flash to stock again. Wish there is a bootloader unlocker for 1.2ghz version of Zenfone 5. So I did not face freezes.
I am too on 1.2 GHz but I didn't faced any freezes after unlocked bootloader
@The Game 370 please share your unlocking bootloader tool. My phone always freezing in CM12.1.
arraiyan123 said:
@The Game 370 please share your unlocking bootloader tool. My phone always freezing in CM12.1.
Click to expand...
Click to collapse
Here it is i always use this only before switching into any custom rom
Thanks @The Game 370. I will try now.
@The Game 370 it still freezes. I don't know it's kernel problem or bootloader problem. Which CM12.1 version do you use?
arraiyan123 said:
@The Game 370 it still freezes. I don't know it's kernel problem or bootloader problem. Which CM12.1 version do you use?
Click to expand...
Click to collapse
man switch to resuresstion rom or cm 12.1 by dgadelha
OK I wiil try it. Thanks for ur advice
Related
Good morning guys from xda , I'm new in this world of mobile phones and made a CM 13 ROM installation on zenfone 5 put the camera does not work anymore , since restarted , already gave reset and already cleared all the files , I know that the camera is working ( physical environment ) please help me already researched in many places ...
Fox64 said:
Good morning guys from xda , I'm new in this world of mobile phones and made a CM 13 ROM installation on zenfone 5 put the camera does not work anymore , since restarted , already gave reset and already cleared all the files , I know that the camera is working ( physical environment ) please help me already researched in many places ...
Click to expand...
Click to collapse
some zenfones have this problem after unlock of bootloader. Try go to stock rom and relock your bootloader
kihope12 said:
some zenfones have this problem after unlock of bootloader. Try go to stock rom and relock your bootloader
Click to expand...
Click to collapse
So there's no custom rom stable 6.0 serving for zenfone 5 , I have q back to orignal version of rom 5.0 lolipop ?
Fox64 said:
So there's no custom rom stable 6.0 serving for zenfone 5 , I have q back to orignal version of rom 5.0 lolipop ?
Click to expand...
Click to collapse
The custom ROM is stable, but your phone have problems with bootloader unlocked. Some phones have issues after unlocking bootloader (such as freezes and no camera detected), so, you can't unlock your bootloader and can't use custom ROMs.
leonardohenrique10 said:
The custom ROM is stable, but your phone have problems with bootloader unlocked. Some phones have issues after unlocking bootloader (such as freezes and no camera detected), so, you can't unlock your bootloader and can't use custom ROMs.
Click to expand...
Click to collapse
Thank you, going back to the original 5.0 lolipop and wait q skirt one arom for zenfone 5 to fix this bug the camera or something , thank you for the help everyone .
Fox64 said:
So there's no custom rom stable 6.0 serving for zenfone 5 , I have q back to orignal version of rom 5.0 lolipop ?
Click to expand...
Click to collapse
No, this rom is stable.. But asus made more "versions" of asus ZF5 , normaly, if you unlock your bootloader you will get freezing, BUT some models work without any freezing and some models have this camera bug..
Hey i tryed long by my self with my new note3 pro
This is how i got all working for me
- unlock bootloader officially
- Flash official TWRP
- Wipe all
- Flash CM13 Firmware then reboot recovery!!! (The Strix)
- Flash CM13 or AOSP 6.0.1 Rom
- Flash latest open Gapps
- Flash Goodix_FP_8
- Flash AgNi Pure CM kernel or Radon 2.9
- Flash CM13Radio ------> important! or you stuck in a bootloop at some roms (The Strix)
Hope i helped some people with this :fingers-crossed:
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
illall said:
Can you give download link.. For goodix fp8 and cm13radio, i only have cm 13 firmware. I will try in rombased cm13. Thanks before
Click to expand...
Click to collapse
There you go for fp8 https://yadi.sk/d/YX644C9UvjMNj
and here is Radio https://drive.google.com/file/d/0B2CgYqnPbCh_RnJDaHJtdEFYRGM/view
Remember this is not my work. I post this, to help all others who got stucked like me.
Just wanna save those guys some time!
This doesn't work for me.
Hello,
I tried yours, only Radon 3.2 instead of 2.9. Camera works like a charm but not Goodix FP. What should I do?
thanks
worked perfect on my kenzoo with goodix fp
Hi, i'm starting this thread to figure out why some moto g4 and g4 plus randomly reboots and when it happes the battery percentaje changes.
For example it is on 95% and it reboots, it changes to 65%
It often happens when a notification cames and after the vibration it reboots.
Do it happens to you??
How can we fix it?
You should mention what device, rom+version, gapps+version, baseband, kernel etc. you are using. Otherwise you cannot figure out where's the problem if everyone has different setups.
It happens only in stock (marshmallow and nougat)
Xt1621 unlocked bootloader
And if I relock the bootloader it still happens
I didnt find a 100% stable ROM to be there so I don't have that bug
ivan290 said:
It happens only in stock (marshmallow and nougat)
Xt1621 unlocked bootloader
And if I relock the bootloader it still happens
I didnt find a 100% stable ROM to be there so I don't have that bug
Click to expand...
Click to collapse
If I understand correctly(if I don't get it, please explain): the problem is only on stock roms? So why not using a custom rom?
That's Right, I don't use Roms because there isn't any stable ROM, or at least I don't know. Would you recommend me a stable ROM?
ivan290 said:
That's Right, I don't use Roms because there isn't any stable ROM, or at least I don't know. Would you recommend me a stable ROM?
Click to expand...
Click to collapse
This one http://forum.xda-developers.com/moto-g4-plus/development/xt16xx-cyanogenmod-14-1-alpha-t3492274 latest build or before the 0502 ist running without any reboot/freeze. RR is also a good choice!
BTT: as your problem is on stock roms only or you have not tested any custom rom it's hard to help you. You can try another kernel, that's all. Bug fixing a stock rom isn't possible, as the source isn't available,you understand?
So try another rom and see if you're facing same problem.
Maybe I am not clear.
Yes I tried Roms that's why I know that the bug is only in stock Roms.
Thank you!
Why A6010 doesn't have that much support? There are some roms but NO CUSTOM KERNEL, and that is what freaks me up a LOT. Phantom kernel with 1,8 Ghz/725 mhz Oc
is not working, or at least is not working on MIUI 8.0.2.0 for A6010. Every time stuck on boot logo. Will try ED300's CM 13, and flash the kernel there, maybe it works(god plz)
Buy a new phone that have much community support . Do not cry after buying a third class phone. It all depends on popularity of device , availability of source codes .
XTutorials said:
Why A6010 doesn't have that much support? There are some roms but NO CUSTOM KERNEL, and that is what freaks me up a LOT. Phantom kernel with 1,8 Ghz/725 mhz Oc
is not working, or at least is not working on MIUI 8.0.2.0 for A6010. Every time stuck on boot logo. Will try ED300's CM 13, and flash the kernel there, maybe it works(god plz)
Click to expand...
Click to collapse
A6K ROM and kernel won't work on A6010.A Custom kernel is on my plan.I will do it later
TingyiChen said:
A6K ROM and kernel won't work on A6010.A Custom kernel is on my plan.I will do it later
Click to expand...
Click to collapse
You're wrong. ED300's CM13 and Phantom R7 for A6000 work perfectly on A6010. But,....
1. Just one speaker works
2. no sim card recognized
But if you use this phone just for browsing and stuff is fine
XTutorials said:
You're wrong. ED300's CM13 and Phantom R7 for A6000 work perfectly on A6010. But,....
1. Just one speaker works
2. no sim card recognized
But if you use this phone just for browsing and stuff is fine
Click to expand...
Click to collapse
look at the rom package inside,i think he updated bootloader and baseband
My screen is entirely broken.. so i replace display at market and then almost all custom rom boot very well but after screen lock touch are note working.. we have to reboot device and first time touch working but after screen lock it's not responsive..
Resurrection Remix treble with moun kernel & stock rom working fine..
Any other rom are not working after screen lock.
Please any one help for this problem??
Prince parth said:
My screen is entirely broken.. so i replace display at market and then almost all custom rom boot very well but after screen lock touch are note working.. we have to reboot device and first time touch working but after screen lock it's not responsive..
Resurrection Remix treble with moun kernel & stock rom working fine..
Any other rom are not working after screen lock.
Please any one help for this problem??
Click to expand...
Click to collapse
I have this exact same problem. I tried with LiquidRemix and didn't check any other ROMs. Thought it was some kind of hardware problem but after reading your comment i guess it wasn't, as you said its working in RR. Thanks for finding that out. Now i am going to try each and every ROM available to check which one works and which one don't. I also think this must be a kernel problem as there are no hardware issues. Can you flash moun kernel in different ROMs to check whether it works or not?
ImSSin said:
I have this exact same problem. I tried with LiquidRemix and didn't check any other ROMs. Thought it was some kind of hardware problem but after reading your comment i guess it wasn't, as you said its working in RR. Thanks for finding that out. Now i am going to try each and every ROM available to check which one works and which one don't. I also think this must be a kernel problem as there are no hardware issues. Can you flash mourn kernel in different ROMs to check whether it works or not?
Click to expand...
Click to collapse
Yes I checked lineage os, all android pie based ROMs but it didn't work.. currently I'm using Miui10 port and it's working fine??
Prince parth said:
Yes I checked lineage os, all android pie based ROMs but it didn't work.. currently I'm using Miui10 port and it's working fine
Click to expand...
Click to collapse
Cosmicdan's Twrp is not working for me. Only mohancm's twrp 3.2.1-2 is working but after locking and relocking the screen in TWRP.
Just flashed RR non treble and the touch is not working after the screen lock
How did you flash RR treble if the cosmicdan's twrp is not working. Was your device already partitioned for treble or is there any workaround?
ImSSin said:
Cosmicdan's Twrp is not working for me. Only mohancm's twrp 3.2.1-2 is working but after locking and relocking the screen in TWRP.
Just flashed RR non treble and the touch is not working after the screen lock
How did you flash RR treble if the cosmicdan's twrp is not working. Was your device already partitioned for treble or is there any workaround?
Click to expand...
Click to collapse
Yes Cosmicdan's Twrp not working but if you install stock ROM and then install Cosmicdan's Twrp then it will work for sure..
Prince parth said:
Yes Cosmicdan's Twrp not working but if you install stock ROM and then install Cosmicdan's Twrp then it will work for sure..
Click to expand...
Click to collapse
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
ImSSin said:
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
Click to expand...
Click to collapse
Don't need to flash stock ROM I'm on Resurrection Remix treble ROM and for flashing I followed steps stated in forum.. it's work for me no bootloops.
First fastboot flash userdata userdata.img and then boot into Twrp and flash ROM zip that's all.
ImSSin said:
Hmm i'll try that in a bit (making backups 1st). Can you please guide me how you got MIUI 10 working as I am not able to do so. Should i flash stock nougat ROM 1st and then flash MIUI 10? I tried following the steps stated in the forum but i am always getting bootloops.
Sorry for bugging you with my nooby questions :silly:
Click to expand...
Click to collapse
Userdata.img is not necessary, just install the rom and format data(must) then reboot
Thnx for the help guys but after spending hours flashing different ROMs, TWRPs and kernels, I finally found the solution for the touch screen bug.
eXtreme kernel is the only kernel that was able to fix the screen completely. Its working in all of the custom ROMs (tried on LOS15.1 & 16, RR, LR Oreo and pie, etc.)
The stock versions of francokernel, void kernel are able to fix the touch screen but it breaks WiFi so they are not a complete fix.
And btw stock versions of Franco,extreme,void kernels work on the stock ROM.
my touch doesnt work on pin screen and in twrp **help** after flash from stock oreo to this rom exl. format data /system and cache..
must i calibrate this or?? when i pres 1 touch meen 9 homebuttons too
is my touch broken or its a bug??
//after flash oreo 8.1 with mi flash ... touch doesnt work
yasars said:
my touch doesnt work on pin screen and in twrp **help** after flash from stock oreo to this rom exl. format data /system and cache..
must i calibrate this or?? when i pres 1 touch meen 9 homebuttons too
is my touch broken or its a bug??
//after flash oreo 8.1 with mi flash ... touch doesnt work
Click to expand...
Click to collapse
have you tried flashing the extreme kernel?
extreme kernel v11 not working only V8 working for me.
What about you guys??
only with kernal 4.9 based custom roms, i have touch issues as described in here. and yeah i had screen replacement too.
now i can't flash any new pie roms as they all are based on 4.9 kernals and i can't find the old pie roms based on 3.18(link dead)..right now on los15.1
:crying::crying::crying::crying::crying::crying::crying:
Same problem here
ImSSin said:
have you tried flashing the extreme kernel?
Click to expand...
Click to collapse
ImSSin
Were you able to solve this problem? Can you put the link to download the kernel?