Related
I’ve always been an early adopter…whether it was audio equipment, computers, mobile phones, software and most recently, smart watches. I’ve been researching and monitoring the progress of these devices since they first started to hit the market. My first smart watch was the Sony Smartwatch, which I returned after about a week…a move I would later question. My second attempt was the Basis Carbon Steel and then I finally got the Samsung Galaxy Gear. None of these did everything I wanted and quite frankly, I’m not sure any single watch ever will…because I want features that conflict with each other. On one hand, I want a stylish metal watch that is classy looking with a suit and provides me with notifications at a glance. On the other hand, I want a fitness watch that has every sensor known to man, has built in gps and will let me listen to music through my Bluetooth headphones without having to lug my phone around. I realize that means I’m going to have to own two distinctly different smart watches. However, there is one feature that EVERY smart watch should have…but none do, as yet. The one thing that I’ve found to be lacking on every smart watch is a sensor that tells it when it’s being worn…and when it’s not. When I’m wearing my watch, I love having it notify me of a new text or email. However, when I put it on my nightstand every night, right next to my smart phone…I don’t need it to vibrate across the surface every time my phone notification goes off…it’s redundant and unnecessary. Additionally, on some models when you finally do put your watch back on the next morning, you still have to clear all the notifications that came through overnight…even though you’ve already cleared them on your phone. So, in my humble opinion, no smart watch is truly smart unless it knows when it’s being used and when it’s not! If I'm wrong and one exists, please let me know.
edwmsjr said:
I’ve always been an early adopter…whether it was audio equipment, computers, mobile phones, software and most recently, smart watches. I’ve been researching and monitoring the progress of these devices since they first started to hit the market. My first smart watch was the Sony Smartwatch, which I returned after about a week…a move I would later question. My second attempt was the Basis Carbon Steel and then I finally got the Samsung Galaxy Gear. None of these did everything I wanted and quite frankly, I’m not sure any single watch ever will…because I want features that conflict with each other. On one hand, I want a stylish metal watch that is classy looking with a suit and provides me with notifications at a glance. On the other hand, I want a fitness watch that has every sensor known to man, has built in gps and will let me listen to music through my Bluetooth headphones without having to lug my phone around. I realize that means I’m going to have to own two distinctly different smart watches. However, there is one feature that EVERY smart watch should have…but none do, as yet. The one thing that I’ve found to be lacking on every smart watch is a sensor that tells it when it’s being worn…and when it’s not. When I’m wearing my watch, I love having it notify me of a new text or email. However, when I put it on my nightstand every night, right next to my smart phone…I don’t need it to vibrate across the surface every time my phone notification goes off…it’s redundant and unnecessary. Additionally, on some models when you finally do put your watch back on the next morning, you still have to clear all the notifications that came through overnight…even though you’ve already cleared them on your phone. So, in my humble opinion, no smart watch is truly smart unless it knows when it’s being used and when it’s not! If I'm wrong and one exists, please let me know.
Click to expand...
Click to collapse
Check A.I Watch it have almost all the features that you are describing
TL;DR
Would you mind having some line-breaks in your post please?
edwmsjr said:
I’ve always been an early adopter…whether it was audio equipment, computers, mobile phones, software and most recently, smart watches. I’ve been researching and monitoring the progress of these devices since they first started to hit the market. My first smart watch was the Sony Smartwatch, which I returned after about a week…a move I would later question. My second attempt was the Basis Carbon Steel and then I finally got the Samsung Galaxy Gear. None of these did everything I wanted and quite frankly, I’m not sure any single watch ever will…because I want features that conflict with each other. On one hand, I want a stylish metal watch that is classy looking with a suit and provides me with notifications at a glance. On the other hand, I want a fitness watch that has every sensor known to man, has built in gps and will let me listen to music through my Bluetooth headphones without having to lug my phone around. I realize that means I’m going to have to own two distinctly different smart watches. However, there is one feature that EVERY smart watch should have…but none do, as yet. The one thing that I’ve found to be lacking on every smart watch is a sensor that tells it when it’s being worn…and when it’s not. When I’m wearing my watch, I love having it notify me of a new text or email. However, when I put it on my nightstand every night, right next to my smart phone…I don’t need it to vibrate across the surface every time my phone notification goes off…it’s redundant and unnecessary. Additionally, on some models when you finally do put your watch back on the next morning, you still have to clear all the notifications that came through overnight…even though you’ve already cleared them on your phone. So, in my humble opinion, no smart watch is truly smart unless it knows when it’s being used and when it’s not! If I'm wrong and one exists, please let me know.
Click to expand...
Click to collapse
It's a very good point. It would save battery life too as it's using less processing when it's not worn.
A smart watch should have as much useful sensors as they can pack in it to make it smart.
A notification LED like the one in the Sony and other mobiles would be useful for saving battery life, you don't have too keep turning the screen on.
As smart watches become more popular they will need Apps without adverts due to the screen size.
Five likely solutions.
Contact switch (requires physical skin contact to work)
Pressure switch (if pressure on back of watch is above X = on)
Heart rate sensor (if detect heart beat then on)
Temperature Sensor (If temp is greater than X = on)
Magswitch in clasp (when clasp is closed device is "On")
Only the Pressure and Heart Rate and Magswitch are viable and would provide the fewest issues. First four would eat battery, the fifth would run into issues if near a magnetic source.
Everything else is doable, and with a transflective or E-Ink/Mirasol display, a notification light is not needed but can see where it would be nice.
Also think that this cam craze is stupid. A 480P front facing would be of far more use than some tiny um 5MP sensor camera mounted elsewhere. It could then also be used as an ambient light sensor facilitating auto brightness.
edwmsjr said:
I’ve always been an early adopter…whether it was audio equipment, computers, mobile phones, software and most recently, smart watches. I’ve been researching and monitoring the progress of these devices since they first started to hit the market. My first smart watch was the Sony Smartwatch, which I returned after about a week…a move I would later question. My second attempt was the Basis Carbon Steel and then I finally got the Samsung Galaxy Gear. None of these did everything I wanted and quite frankly, I’m not sure any single watch ever will…because I want features that conflict with each other. On one hand, I want a stylish metal watch that is classy looking with a suit and provides me with notifications at a glance. On the other hand, I want a fitness watch that has every sensor known to man, has built in gps and will let me listen to music through my Bluetooth headphones without having to lug my phone around. I realize that means I’m going to have to own two distinctly different smart watches. However, there is one feature that EVERY smart watch should have…but none do, as yet. The one thing that I’ve found to be lacking on every smart watch is a sensor that tells it when it’s being worn…and when it’s not. When I’m wearing my watch, I love having it notify me of a new text or email. However, when I put it on my nightstand every night, right next to my smart phone…I don’t need it to vibrate across the surface every time my phone notification goes off…it’s redundant and unnecessary. Additionally, on some models when you finally do put your watch back on the next morning, you still have to clear all the notifications that came through overnight…even though you’ve already cleared them on your phone. So, in my humble opinion, no smart watch is truly smart unless it knows when it’s being used and when it’s not! If I'm wrong and one exists, please let me know.
Click to expand...
Click to collapse
You need a Pebble bro.
Has DND settings for night time, syncs to phone notifications. I'm using mine on jailbroken i5 and smartwatch+ lets me reply to notifications from the watch, call people. Has massive battery life. Pebble Steel is stylish and functional. I have a Pebble (original) with a wide leather band, looks sweet.
Only thing it can't do is prevent you lugging your phone about, but the BT range on the pebble is about 20-30m in my experience, so you may get away with it at the gym/home/office. I know i can walk to the printer and such at work without my phone, or make a coffee. And at home i can leave the iphone in a dock to play, and change songs and volume while doing the dishes. (yep. pebble is waterproof.)
Got mine second hand for $80. what have you got to lose :victory:
Talking about sensors... http://m.europe.wsj.com/articles/apple-plans-multiple-designs-for-smartwatch-1403245062?mobile=y
Apple's rumoured watch packed with sensors. Wonder if it'll be truly smart. Even if it's the 'best watch' you'll need to buy an iPhone to use it until they find a hack for it.
... how about a pebble like watch but with WiFi, GPS and packed with sensors. The battery wouldn't 't last as long if you use the WiFi. But if you don't then it should last just as long. And an option to have a cam in the strap or no cam at all.
As mentioned above the perfect watch is not one watch, but perhaps two.
1. A non sim pebble like with better battery life with IP67. With loads of sensors!
2. Sim watch transflective colour screen packed with features but shorter battery life and not IP67. With loads of sensors!
Either way the traditional way of opening an app for a specific need will be replaced with a totally new way of accessing info. An ambient service that automatically brings info to your screen as you change your environment. Morning + at home = daily schedule, traffic news, work email only, weather... Etc. At home at evening = personal emails only, audio player, instagram... Etc. Opening an App will be phased out.
Google glasses is doing it already. Android wear is aiming for it.
And when these 'hyperaware' wearable start sensing and working with other hyperaware wearables... that's when the fun really begins.
---------- Post added at 05:47 PM ---------- Previous post was at 05:41 PM ----------
Off topic slightly, I've asked the Moderators to make a forum or thread for general smartwatch discussion, I thought to have it next to where the Sony, pebble, Samsung and other Smart watch is... At the uppermost level. I've asked them to let me know if they agree or not. Let's see what they say.
Hi,
I was searching for a Smartwatch and ended in ordering a (Chinese) Lemfo LF16 with full Android 5.1, ...
Interesting for me was that it seems to be a nice watch, smartphone functions, all connectivities possible and also some health function like pedometer, etc.
https://de.aliexpress.com/item/Smart-Watch LF16
Someone else having this one and already experience?
What are you thinking of this watch?
When I receive my, I will post feedback...
Thanks
giovanne
I'm anxious to hear more from people on this, and if there are any hacks and such for it. I dreadfully searched for days for the standalone smartwatch that was best for me, in the price range of this thing, and settled on this one for it's quick access sim slot (I will be alternating between this and the Nexus 5X), loud speaker (which is on the side, not on the wrist/bottom) because I need to hear my notifications), big screen, and not overly geeky looks. Hopefully it's as good as it seams and I don't regret my choice!
Well,
Here is a quick list of what I have discovered so far. Depending on what you will be using it for, you will either really love it or really hate it!
I'm using it mostly for the Bluetooth MP3 player features in addition to the basic watch.
Pros
• Nice design ala "Gear S3
• I can finally walk down the street with my Bluetooth music playing and swinging my arms without intermittent cutting out!
• The Bluetooth sound reproduction is really good even with stock player.
• Speaker nice and load.
• The weather update now works using your phone data and no longer request that you turn on your GPS.
• Access Sim with requiring the removal of back cover.
• Got rid of the ugly backgrounds within Notification screen, just a sweet black (well almost black)
Cons
• Operating system seems very beta as it has the most ugly watch faces ever released for a Lemfo Android watch, and leaves us with only 2 tolerable faces (hence incomplete OS)
• Unable to load up custom watch faces via "Clockskin any more.
• Watchstrap LUGS have been removed so not custom watch strap mods
• Silver bezel only comes with white band.
• Watch strap is very flimsy compared to the silicone strap available with the X3 Plus
• Watch is toted as, "Ultra thin" but it is not. The bezel is low profile, but there is more to the body although beveled in, so the watch has an unattractive umbrella look to it.
• Bezel is not stainless steel but some other lighter metal, maybe Aluminum or Titanium Alloy, so the quality feels almost Toy like. (so don't bump it!) My X5 still rules!
• Lemfo cut cost by providing a less than adequate charging cable that has poor magnet strength.
• I bought two of these watches and only one of the chargers worked. (Murphy's Law)
• When booting to recovery, there is no way to navigate the menu as it only has one button
• When navigating some of the app functions user is unable to adjust a function that requires swiping as this brings you back to a previous screen (Try to increase the volume by swiping without backing out of the function!
• Still unable to add App widgets to existing basic three (weather, fitness, music etc)
• Some screens don't allow you to go one step back by swiping right, but instead you have to press the power button and start again.
• At times "Data" connection seems to keep turning it self off. I think it happens after phone goes to sleep for a period of time, but the function to disable "turning off the data" is no longer within the "Display" section.
• Screen is promoted as, "Amoled" but the blacks still appear back-lit!
Enable Data
Update,
Enabling data now has its own icon within the quick access screen. I think that I was disabling this, not knowing what it was and therefore concluded that the data was turning itself off.
Thanks for the really good and detailled feedback.
I got mine LF16 also in the meantime.
Overall I can agree with you "Star_Inc".
For my first tests and usage I only want to use it as "normal" clock/watch and to try the pedometer.
For the first tests and to have max. bat-life I use the watch in Flightmode without (GPS, GSM, WLAN,...)
For the normal clock I tested with custom ClockFace handling.
- apk - Clockfaces available for the KW88 clock will work on the LF16 too
- "ClockSkin" folder method works with e.g. the (standalone) launcher/app from Eric: http://roundandroidwatches.proboards.com/thread/267/standalone-clockskin-engine-apk-version
First pedometer tests where ok - will go on testing
Bluetooth with my Oneplus 3 Smartphone is working (but I don't like all the notifications on the watch)
Bluetooth filetransfer from Smartphone to LF16 is working (e.g. useful when transfering a new apk to the watch)
The suggested APP WiWear(SinWear) for the phone to connect is "horrible"!
I will go on testing...
does anyone know how i enabled syncing?
What about GPS accuracy? And battery life?.
Hey Guys
I have already received my watch i agree with stark_inc, but i see the quality of the bezel is good
the overall feedback after 2 days is good, except 2 things
1. the terrific support program WiiWear (SinWear), this is the only way to connect the watch to my phone, unfortunately failed to connect it to Android Wear, MediaTEK Smart Device or Fundo, i hope some body helps with this
2. i cant add more watch faces also
for battery life it is ok to keep in your hand 1 day (provided you don't go through it many), thickness is ok, i think it was to be better if it is 1.3" instead of 1.39"
---------- Post added at 07:51 AM ---------- Previous post was at 07:49 AM ----------
Daisuke1988 said:
does anyone know how i enabled syncing?
Click to expand...
Click to collapse
Only i can sync the watch to the phone through the rubbish program WiiWear
---------- Post added at 07:52 AM ---------- Previous post was at 07:51 AM ----------
Hav4k said:
What about GPS accuracy? And battery life?.
Click to expand...
Click to collapse
if you are going to use it much, it won't go with you for 1 day
turning off wifi will support battery significantly
GPS is ok i get my location exactly
Hey Guys
I tried ClockSkin Launcher and it is working fine
the major issue for me now that i cannot connect the watch to the phone except via this very poor WiiConnect (SinaWear) app, even it doesn't sync the steps and it really fool app, i hope someone can help how we connect the watch to Apps like Android Wear or any other useful app!
I'm Working On Something Wonderful!
Hey ladies and gentlemen,
If you are an owner of a LF16 or KW88 or LEM3 or BLITZ you are aware of the annoying inconsistent configuration of their custom watchface implication, and as a result some have been pulling their hair out trying to devise of ways to accomplish this the caliber of ClockSkin.
My solution is to do away with the entire operating system and install a ROM that supports native ClockSkin.
This work is in progress, but if successful we can then do away with this line of watches headaches, and focus our creativity to produce ClockSkin compatible faces.
I'll keep you updated!
And yes, this is a custom LF16 hardware!
@Stark_Inc, hey man, if you can do that, kudos, I'll try it out. Can you elaborate on what you're doing, other than making a ROM for these phones? What is it based on? Stock? Or using LF16 rom and just editing the watchface handling?
I think a new ROM is certainly not a bad idea if it can be done - it may allow us to more easily fix the rest of the problems, which I agree are many.
I'm soooo disappointed with this thing (LF16). I chose it because of the easy access of the SIM card because I thought I'd like to swap between phone and this, but the battery life, if the watch is used, SUCKS, and charging "in the field" is pointless given how lousy the connection is (bad format anyway). Starting to think what I would have preferred isn't a full android watch in the first place - but more like Android Wear. I'm really hoping people who are smarter than me save the day with new ROMs and other fixes to make it worth owning.
I didn't spend 100 bucks for a watch. I honestly don't care a whole lot for watches (jewelry in general), I paid for a smart device. What is the point if you can't use it all day - which you can't. You can use it as a watch all day. I haven't had the guts to try it with my sim card yet. I doubt it would be much better. But turning off BT and WiFi certainly improved battery life by a TON. But what's the point?
I thought it would be easy to find a replacement companion app for this thing (for smartphone) but nothing works with it. Even the one they want you to use is not only **** even it if it worked, but for me crashes (Nexus 5X with 7.1.1) ever time it connects. I can't track fitness for ****. Even Google Fit - um, where's the heart-rate data collection? I tried apps both directly on the watch and the Nexus - nothing seems to collect historic data.
I think some of my problems are more with "stand-alone Android" watches more then the LF16, but since this is my first, I could be wrong.
KW88/LF16 Lite and Clean
So i'm moving away from my original idea of porting a "ClockSkin" friendly rom, and instead I am working to make the KW88/LF16 Rom more cleaner, lite'r and battery friendly. In fact, I have sought of started to make the UI more like the GEAR S3. I'll keep you posted.
Oh. I've also installed my own clock face of preference within the existing WatchApp engine, and I am sure I should be able to activate other dormant faces in the future.
someone try to add this keyboard ? https://www.kickstarter.com/project...oard-the-first-dedicated-smartwatch-k?lang=fr
i'm looking to a faces like this too, i love one hand watch
Stark_Inc said:
Hey ladies and gentlemen,
If you are an owner of a LF16 or KW88 or LEM3 or BLITZ you are aware of the annoying inconsistent configuration of their custom watchface implication, and as a result some have been pulling their hair out trying to devise of ways to accomplish this the caliber of ClockSkin.
My solution is to do away with the entire operating system and install a ROM that supports native ClockSkin.
This work is in progress, but if successful we can then do away with this line of watches headaches, and focus our creativity to produce ClockSkin compatible faces.
I'll keep you updated!
And yes, this is a custom LF16 hardware!
Click to expand...
Click to collapse
This should be great!
One question, KW88 watch is almost (except camera) the same HW than LF16, Do you Know if it's possible to flash KW88 ROMs in LF16?. Support for KW88 seems to be much better than LF16.
Small back from this watch I have for less than a week, the battery holds about 8 hours, without playing too much, black screen, not the needles in permanent lighting, I hope the arrival of a rom by Stark_Inc It would be really good, optimize the duration of the battery, make that one can further decrease the brightness, I have a sim card in and the data connections active. If not, I find it beautiful. I would like the screen to display the hours all the time, with a duration of 10 hours would really bein, is it a dream? I am on the orange network france.
Hi, I'm waiting form my LF16 to arrive (I guess I would go with the LEM5 for the 1GB of RAM, but I've noticed it after my watch was shipped ),
I'm spending my time planning my actions with itm so...
- Is kingoroot working on this watch to gain root access?
- is it possible (and needed) to activate swap on this watch?
- any list of mods/customization existing - maybe a new thread, or a sticky?
I hope people can make this watch worth the money, as I read it is not really that good....
Hi. I got this smartwatch for my son for xmas and I have not being able to get a pre-pay service provider to get a sim card for it. my son does not have a cell phone that is why we got him the watch but where ever i take it they say that wont work with their network. Can somebody please help me to finish with my son xmas present.
Thank you
Hi ,
The watch work with : 3G WCDMA 850/2100 ; 2G GSM 850/900/1800/1900 quad-bandes Network .
You have to find the telephone company that uses its frequencies .
Has anyone though about installing a bigger battery on this watch? I have seen some on eBay up to 1200ma. This would definitely sort out the battery problems but I have no idea whether or not they are safe to install or even what type of battery this watch uses as I haven't opened it up.
Something I was thinking about doing but not sure if it can be done
Hi Karl, can you send me the links to the ebay store please ? tnx , now the automnomy of my watch the 3 / 4 days are 5 hours max !
Hello everyone.
Is there anyone here with multiple Wear watches (preferably with different Wear versions) paired to a single phone?
I am wondering it it is just me, or anyone else too, that have such problems with watches.
I suspect that since the Wear app v. 2.0 started rolling out, having multiple watches (with different OSs) paired to my phone just started an armageddon.
Before official 2.0, I had devprev on huawei and 1.5 on zw3 and Gwatch. I had ZERO issues, ever. Then, Wear app v. 2.0 update came and it slowly began:
Wear app is going haywire almost every week. I shot few videos, hopefully I will be able to throw them on youtube tonight to showcase what is happening. But basically: I choose a watch and connect it in wear app. App shows connected. I leave for work. At work I notice I dont get notifications. I check the app, and it shows one of few possible screens: trying to connect.. or "Have a watch? set it up" (that is the most hilarious for me ) Or shows a page that would normally show your chosen watch, but it is blank. Everytime I close and open Wear app, it can show something different. It can also be showing "Connected" for a long time, but nothing works. You cant see battery stats, change watchface, nothing...
The last time, I even lost all my paired watches in BT settings. Wear app says "reconnect", ok, it reconnects, but actually isnt connected. Well, I am not sure about that to be honest.. Smart lock works Sometimes, watch says connected too (in Settings-About) The most faulty watches are those with 2.0. But it happened to 1.4 and 1.5 too.
As of right now, only zenwatch3 on 1.5 is working, but, I did a FR yesterday because it wasnt working
I am really f**king fed up with resetting every god damn watch every god damn week so that it can work for a week and then god damn break again!
I am so glad I still keep my Sony SW2 as a backup, this watch works just AWESOME! Wear watches are still nowhere near the ease of usability and reliability of SW2.
EDIT: I uploaded videos of said behaving:
NOone with issues with multiple watches??
Yes, only 1.5 watches still, but I get best results with only one watch powered on at a time, and only one manually chosen to be connected via BT in the phone app. Otherwise, there are frequent connect/disconnect notifications, mysterious quick battery drain, and often conflict between what the phone app says is connected, and what the icons on the watch say about the connection. I occasionally get the "set up your watch" on the phone app as well. I just back out of it, and it's ok.
sirrelevant said:
Yes, only 1.5 watches still, but I get best results with only one watch powered on at a time, and only one manually chosen to be connected via BT in the phone app. Otherwise, there are frequent connect/disconnect notifications, mysterious quick battery drain, and often conflict between what the phone app says is connected, and what the icons on the watch say about the connection. I occasionally get the "set up your watch" on the phone app as well. I just back out of it, and it's ok.
Click to expand...
Click to collapse
Thanks, the symptoms are the same. But it is happening to me even when I have only one watch powered on and only one watch connected to phone. But, 7 watches total are paired. I am starting to think if it is something with BT 4.0 hardware limitations.
Sorry for the crosspost - hoped I can get more eyes here...
Searched and searched so posting here and will try in general thread in case it's not tied to the watch itself.
Background: IOS user for phone, have to - developer, had Apple Watch (hated it). Got myself a Huawei Watch 2 on a deal and loved everything about it except the useless bezel and tiny screen size. Seeing as I had a great experience, I started a hunt for an LGWS. Hunt because not a single store sold one and I'm in Chicago with LOTS of stores. So online we go. There too - few resellers. Finally found one. New. Manufacture date of May 2017.
The Watch 2 worked flawlessly as functions go. Sycn'd, stayed connected, battery life of full use (all functions on - obviously no LTE), brightness at 8, raise to view on, always on display on... end of the day going to bed around 10:30 still had 50% of battery left at worst! The only issue other than cosmetic that it had was WIFI would not connect so "automatically" so to speak. So when I sent a watchmaker face, I always had to go to settings, connectivity, wifi and wait until the SSID showed connected. Then all is fine. Transferred over and enjoyed.
So the LGWS shows up. I unpair the Watch 2, connect up the LGWS and love it. The display I expected, size is great for me and off to the races. Within an hour it went from 95% to 60%. I figured - setup blues. Ignore it. Let it fully bake and see what happens. Another hour later I'm at 30%... ok onto the charger we go. Did a full charge at 6pm, by 9pm it was flat.
LGWS background: GW 2.8 loaded, Watch 2 was still running 2.0. LGWS - cellular off, raise to view on, display brightness 4, wifi connected...
But here's what I noticed: on my phone, it consistently says disconnected - tap card to connect. I tried that about 20 times, no joy. Rebooted watch and phone... no joy. Reset watch, deleted app on phone and deleted Bluetooth pairing. Re-installed Wear app, re-paired watch, left all at stock settings except shut-off cellular and OK Google listening.
That last bit is the 6-9pm going totally flat.
So. Any ideas here? Things I see - 8 vs 2 OS... obviously IOS (I get it, but why did the Huawei work so well?) and there is nothing I can do about that. Don't know if I can downgrade to 2 to see if that makes a difference... if I do, will it self-update back to 8 when it gets a chance?
I really want to keep this watch - it's exactly what I wanted (short of strap change capability). I sure hope Google doesn't give up on Wear. As a Mac/IOS dev, I can easily say this is a superior platform for the user. Truly great stuff and I want it to improve and keep improving. The iWatch bigots are really missing out!
Thanks in advance for your tips.
Cheers!
P.S. One thing I cannot do on IOS AW app is see battery usage by app. Sadly if I paired up to my old Galaxy S5 test phone, I suspect the problems may go away as it would be a first pairing of a watch to that phone plus it's not the same as the use environment.
wig said:
Sorry for the crosspost - hoped I can get more eyes here...
Searched and searched so posting here and will try in general thread in case it's not tied to the watch itself.
Background: IOS user for phone, have to - developer, had Apple Watch (hated it). Got myself a Huawei Watch 2 on a deal and loved everything about it except the useless bezel and tiny screen size. Seeing as I had a great experience, I started a hunt for an LGWS. Hunt because not a single store sold one and I'm in Chicago with LOTS of stores. So online we go. There too - few resellers. Finally found one. New. Manufacture date of May 2017.
The Watch 2 worked flawlessly as functions go. Sycn'd, stayed connected, battery life of full use (all functions on - obviously no LTE), brightness at 8, raise to view on, always on display on... end of the day going to bed around 10:30 still had 50% of battery left at worst! The only issue other than cosmetic that it had was WIFI would not connect so "automatically" so to speak. So when I sent a watchmaker face, I always had to go to settings, connectivity, wifi and wait until the SSID showed connected. Then all is fine. Transferred over and enjoyed.
So the LGWS shows up. I unpair the Watch 2, connect up the LGWS and love it. The display I expected, size is great for me and off to the races. Within an hour it went from 95% to 60%. I figured - setup blues. Ignore it. Let it fully bake and see what happens. Another hour later I'm at 30%... ok onto the charger we go. Did a full charge at 6pm, by 9pm it was flat.
LGWS background: GW 2.8 loaded, Watch 2 was still running 2.0. LGWS - cellular off, raise to view on, display brightness 4, wifi connected...
But here's what I noticed: on my phone, it consistently says disconnected - tap card to connect. I tried that about 20 times, no joy. Rebooted watch and phone... no joy. Reset watch, deleted app on phone and deleted Bluetooth pairing. Re-installed Wear app, re-paired watch, left all at stock settings except shut-off cellular and OK Google listening.
That last bit is the 6-9pm going totally flat.
So. Any ideas here? Things I see - 8 vs 2 OS... obviously IOS (I get it, but why did the Huawei work so well?) and there is nothing I can do about that. Don't know if I can downgrade to 2 to see if that makes a difference... if I do, will it self-update back to 8 when it gets a chance?
I really want to keep this watch - it's exactly what I wanted (short of strap change capability). I sure hope Google doesn't give up on Wear. As a Mac/IOS dev, I can easily say this is a superior platform for the user. Truly great stuff and I want it to improve and keep improving. The iWatch bigots are really missing out!
Thanks in advance for your tips.
Cheers!
P.S. One thing I cannot do on IOS AW app is see battery usage by app. Sadly if I paired up to my old Galaxy S5 test phone, I suspect the problems may go away as it would be a first pairing of a watch to that phone plus it's not the same as the use environment.
Click to expand...
Click to collapse
Man, as I was reading this I was like.. is this guy a mind reader.. I swear to you I have the exact same issues, and the same reason for switching from Apple watch Series 3 to Android Wear (watches should be round darnit).. I almost bought the HW2 classic and for the same reason (smaller screen, giant bezel, etc.) bought the LGWS.. I sure hope someone has some advice for both of us recent converts!
Day 2... full delete of app IOS, reboot phone. Full restore of watch. Remove from bluetooth pairings. Start over from scratch.
left it mostly stock... only OK Google and Cellular turned off (no sim in there anyhow, but to be safe since technically all phones are supposed to allow 911 calls regardless of sim status)... in that stock vanilla flavor - battery held up all day. Ended the day with about 30%. WIFI was not linked to any network, so just Bluetooth to my phone. All worked great.
Day two of grand experiment.. added WIFI set to auto on. Loaded the main app I really want, Watchmaker. five hours of use 44% of battery gone - roughly 8ish percent per hour. Not terrible, but compared to vanilla. MUCH worse. Will keep playing. The mix is in there somewhere.
The shocker is that the HW2 has a slightly smaller battery (10mAh smaller) but also a MUCH smaller face. That would account for it.
I had exactly the opposite experiences with the Huawei and LGWS. I tried out a Huawei watch 2 classic for about a week, and I had TERRIBLE battery life. Like, fully charged to DEAD in 12 hours. The LG lasted me 18 - 25+ hours (the lesser on workout days). I had all connections turned off except Bluetooth, although I turned on GPS on the LG and didn't notice any battery life change. I had assistant on, fit with everything on, always on, basically most of the apps and such.
Unfortunately, it seems like the battery life you get depends on the watch, and what you have on with AW. With LTE and WiFi on, I'm sure I would have been charging the LG once at least during the day.
Not seeing much on here about this watch so I thought I would start a new thread just for it! Who has one on their wrist? Tell us what you think. It is high on my list for my next Smartwatch.
https://www.mobvoi.com/la/pages/tic...1Jd7zP8Vt0r8cvxPlom-r9_PjAcKmv7xoCiZ8QAvD_BwE
SirDigitalKnight said:
Not seeing much on here about this watch so I thought I would start a new thread just for it! Who has one on their wrist? Tell us what you think. It is high on my list for my next Smartwatch.
https://www.mobvoi.com/la/pages/tic...1Jd7zP8Vt0r8cvxPlom-r9_PjAcKmv7xoCiZ8QAvD_BwE
Click to expand...
Click to collapse
I've had one for several weeks. Absolutely love it. I've had several other Mobvoi watches, but this is the best of them all. I'm getting close to 3 days battery life with all sensors turned on, using the secondary display. I'm able to sleep with it on to use the TicSleep app. Play Store loads quickly on it, and runs smoothly. If I get a call while wearing my ear buds, the call comes in simultaneously on my phone, my buds, and the watch, giving me the option to pick which one to answer the call. No other watch has ever responded that quickly to calls. All in all, a great watch. Well worth the expense.
Sent from my Pixel 3a XL using Tapatalk
hilker09 said:
I've had one for several weeks. Absolutely love it. I've had several other Mobvoi watches, but this is the best of them all. I'm getting close to 3 days battery life with all sensors turned on, using the secondary display. I'm able to sleep with it on to use the TicSleep app. Play Store loads quickly on it, and runs smoothly. If I get a call while wearing my ear buds, the call comes in simultaneously on my phone, my buds, and the watch, giving me the option to pick which one to answer the call. No other watch has ever responded that quickly to calls. All in all, a great watch. Well worth the expense.
Sent from my Pixel 3a XL using Tapatalk
Click to expand...
Click to collapse
Mine is supposed to show up this Friday. Can't wait! I'm using an Amazfit Pace so I expect a huge improvement. Still, my Pace that I use since 2 years does a fine job.
Ticwatch Pro 3 gps
Just received my Ticwatch Pro 3 gps and loving it so far. Took 20 days for delivery, what they didn't mentioned when ordering, they stated 4 to 6 days from ordering, but ok. On the Mobvoi forum, i have read some disturbing post on the watch and poor customer service from Mobvoi. But isn't that with all forums, you just only complain if something is wrong, not if everything works ok. Well have fun with the watch!
Hello.
I hope for a few opinions from the owners of the watch, which are a consequence of yesterday's software update?
Been using mine for a month. This is what a wearos watch should have always been. Great batt life, fabulous display. Got a deal for $200 direct from mobvoi, pre ordered.
Sounds like a good wear os watch...
I pre-ordered this watch and have had it around 5 weeks now.
This is my first wearOS watch by choice. I waited for a processor that was half decent and that came with the Snapdragon Wear4100.
This watch lasts be between 2.5 to 3 days with me doing a GPS tracked walk every evening for around 1 hour, 24 hour heart rate monitoring, constantly connected via Bluetooth to my phone.
This watch also doesn't have the latest WearOS update that is supposed to improve app opening times etc but even without that, this watch is smooth and it doesn't feel like there are lags anywhere.
There isn't a custom ROM yet but if they come in time this watch would only get better.
In short, if you want a WearOS watch, this is a clear winner and overall great watch.
Sent from my Pixel 5 using XDA Labs
My watch arrived a few hours ago, delighted so far - but I'm unable to register on the Mobvoi site, no matter what I enter the page always gives the error "Please enter correct phone".
https://passport.mobvoi.com/pages/register
EDIT: and the answer is - you enter your email address in the field marked "Phone number" (!)
Just got mine today and it's a nice watch. My first one too. The announced endurance, récents update of the os, the price, the snapdragon and the two screens convince me to finally buy one. Waiting for a really good one since the firsts Lg watch. Hope it will work for a long.
Calls are clear, large choices of apps and themes.
I think I'll buy another bracelet and an protection glass. If anyone had one to recommend.
Fr customer.
It's been more than a week with the watch and I'm impressed with everything around it. Many applications and sensors for everything that interests us in everyday life. Responds quickly to everything, when receiving notifications and when making calls, the screen responds immediately without delay.
I got mine yetserday.. gods I missed the wearOS line.. so glad I'm past my Tizen device now.
Some questions though:
whats happened to the gestures?
https://www.youtube.com/watch?v=0WhKuklpQ9A
I dont seem to be able to do the "perform an action" "dip" Gesture anymore
Also where is the setting that "lights up" the grey screen? I don't seem to have that option
*Edit* Fixed this, had to turn OFF the "Tilt to Wake" to get the light up...
If i understand your question, this gestures are in Settings/ Gestures/ For navigation.
On another question for lighting in FTN screen, there is no option to change time to light.
We have option to disable the light on ftn screen, just set theater mode from quick buttons.
For light, set tilt to wake OFF.
What is for you dip gesture?
Monipeev said:
If i understand your question, this gestures are in Settings/ Gestures/ For navigation.
What is for you dip gesture?
Click to expand...
Click to collapse
The "Dip" gesture let you dip your hand down to "open the notification"
and the reverse "lift" gesture to close the opened app (go back essentially)
These two dont seem to be on WearOS anymore
Hi, anyone got this issue?
I try to test the watch to less than 5%, but it doesn't automatically switch to essential mode. Anyone know what might be wrong? I have tried to set it in the essential mode apps but seems doesn't change a thing. Thanks
This must be the kernel source of this watch according to the official forum:
https://github.com/mobvoi/mobvoi-ticwatch-kernel/tree/mobvoi-android-msm-rover-4.9
Sent from my Moto Z (2) using Tapatalk
hart reset
does someone know, how to really hart reset the ticwatch pro 3 gps? I played around with these adb commands and the normal hart reset via system does not bring the whole system back. I would like to wipe out of a recovery modus ? I played around, because my battery time was incredible: just one day juice ... tried to deinstall the whole tic - system, but something went wrong, from now, I´ve got no sensor activities!
Thanks in advance
floyd007 said:
does someone know, how to really hart reset the ticwatch pro 3 gps? I played around with these adb commands and the normal hart reset via system does not bring the whole system back. I would like to wipe out of a recovery modus ? I played around, because my battery time was incredible: just one day juice ... tried to deinstall the whole tic - system, but something went wrong, from now, I´ve got no sensor activities!
Thanks in advance
Click to expand...
Click to collapse
There are a lot of issues with the sensors at the moment, including myself after the latest firmware;
Since i am a new user I cannot link to an external site. But:
h ttps://forum.mobvoi.com/viewtopic.php?p=74876#p74876
Pretty happy with mine but my only gripe is I'm not getting notifications for the Messenger app. And searching for the app in play store on the watch comes up with nothing.
Anyone else having the same problem?
Sent from my SM-G960F using Tapatalk
I have TWP model 2019 and TWP 3. Activating a watch with Redmi Note 8T is a horror. When successful, the watch does not work as a handsfree. After attempting to make a telephone connection from the watch, the BT pairing is canceled and he must reset both the watch and the phone to reconnect it. Various discussions suggest that this is a common problem. Does anyone know the solution?