This is a painful message to write, but I am desparate. This should be so simple!
Have a U8800 standard (at least it says only "U8800" in settings/about phone.
What have I done:
- Upgraded some time ago to 2.3.5 Rev B522 from Huawei.
- Then rooted it with SuperOneClick.
- Installed ClockWorkMod from Play Store.
- Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
- Turned off Fast boot under settings/applications
:: What worked/happened.
- Rooting went fine, ES file explorer and others get root-permissions ok.
- But got into CWMRecovery only via CWM program (Choosing "Reboot into recovery"). Never with the holding buttons vol+ and power-button during power-on.
Figured it was that locked bootloader on B522 that was the problem.
What I did:
- Followed the instructions in http://forum.xda-developers.com/showthread.php?t=1457490 (Get your pink screen back).
- In CWM Recovery flashed "update-B518-bootloader.zip".
- Got "ok installed or something to that effect" from CWM Recovery.
:: What worked/happened.
- Still could not get into CWMRecovery via button-holding. Tried reflashing the B518 bootloader a few times, but just no difference.
Read somewhere that each Huawei firmware-release comes with it's own bootloader, so lets try to install Huawei B518.
- Only place I could find the image was here http://huaweiideosx5.blogspot.no/2012/03/u8800-b518-23-software.html
- U8800V100R001C00B518G001.zip
- Had to take out the external SD-card to get the /sdcard/dload directory on the internal SD-card.
-Seems to be important to have dload on the internal SD-card and not the external.
- Booting the phone with vol+, vol-, power did not start the downgrade, but was able to trigger it via settings/storage/software upgrade.
After downgrade to B518 (Checked version in settings/about phone):
- Deleted /sdcard/dload directory.
- Rooted with SuperOneClick
- Installed ClockWorkMod from play store again.
- Put CWM Recovery 5.5.0.4 into ./cust_backup/image again (think this was unecessary. I think it was already there but did it anyways)
- Turned off Fast boot under settings/applications.
:: What worked/happened.
- The phone is now in B518 software, but still can not get into CWM Recovery via keypressing at boot.
I hold the vol+ and power-buttons all the way to "desktop" so to say, but can not for the life of me get into CWM Recovery that way. Getting into CWM recovery 5.5.0.4 via instructing CWM application to boot into recovery works fine, though.
I am drooling at the thought of ICS Aurora, but I don't dare before I can reliably get into CWM Recovery via keypress.
Sorry if this is very stupid post, but I have tried so much.
Maybe the volume buttons are faulty? Turn off the phone and try this: hold down volume up; while holding press power button as long as the logo comes up. Release power button but continue holding volume up. If it did not work, try doing same with volume down.
Yeah, do what Blefish advised you but do it while the phone is off and charging. I have a kinda broken power key and with this 'trick' it boots faster and more reliable. Keep holding the 3 buttons until you see the recovery.
Sent from my U8800
Thank you both for trying to help me here!
Unfortunately I have had no luck with your suggestions.
Re: Broken keys.
Power and volume-buttons seems to work well when the phone is on. Also when I boot into recovery through the CWM program, navigate to advanced/key-test, the vol+, vol- and power button seems to work well there too.
On pressing the power-button, CWM-R reports Key: 116
On pressing the vol+-button, CWM-R reports Key: 115
On pressing the vol--button, CWM-R reports Key: 114
So I think the keys must be ok, right?
Blefish: I did what you suggested, as I understood it.
When the phone boots, there are three stages of logos.
1. A static logo of Huawei's red "fan?".
2. A short "comet" animation.
3. An animated logo of Huawei's "fan", where some highlight flashes from left to right over the fan.
I hold the power-button in until I see the first static logo, then let go of the power-button and hold the volume-key(s).
Is this the same stage in the boot-process that you were thinking of?
I have tried vol+, vol- and both vol+ and vol-, together with releasing the power-button at that point.
Have not had any success with that, and ended on the "desktop" each time.
AceDroidX: I tried your suggestion as well.
I did this:
1. Shut down the telephone
2. Plugged in the power.
3. A "fan"-logo appears which is replaced by an animated battery.
4. Upon seeing the animated battery, I tried the various key-hold variants.
- vol+ and power : Ended up at desktop.
- vol- and power : Ended up at desktop.
- vol+ and vol- and power : Ended up at desktop.
So not much success either.
I am out of ideas... Can it be that B522 bootloader that still lingers in there, not replaced by installing the B518 software?
Well, idk what else to suggest.. Maybe your problem is here?
Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
Click to expand...
Click to collapse
I remember that when i mount my phone in linux, there was a partition with just the image folder. Some files like boot.img and recovery.img where there. Try to put the recovery image in there and see if it makes any difference.
I'd like see your versioninfo, can you upload a screenshot?
You can check mine from B528
AceDroidX: When I use Remount, I am able to mount that partition as read/write so that I can copy CWM's Recovery image in there. I think it is identical as mounting it up remotely, as you do. I am after all able to boot into CWM-Recovery, just not by key-pressing? I suppose I could boot into Linux and try to mount up the partitions as you do.
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Treq01 said:
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Click to expand...
Click to collapse
You have to dial *#*#2846579#*#*
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Treq01 said:
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Click to expand...
Click to collapse
Based on the screenshots your installation is fine.
Just one last shoot based on what AceDroidX says, with phone off press Vol+ and hold then connect USB cable to PC or charger and stay holding Vol+ then wait...wait and what you see?
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Wow.. It is hard to believe.. but I have actually ... eventually found a way to get into that CWM-Recovery every time.
It is a combination of your suggestions.
I have been doing variations, trying to figure something out and eventually there is a method.
What I must do, on this phone, in order to get into CWM-R is this:
1. If the charging cable is in, then unplug first.
2. Turn the phone off.
3. Take out the battery and put it back in.
- This makes a difference on my phone, at least. I am not able to get into CWM-R wihtout taking the battery out first.
4. Press and hold Vol+
5. With Vol+ being pressed continously, insert the charging-cable.
6. Wait for the Fan-animation to finish and the "battery-charging" animation to start.
7. When the battery-charging animation is running and the screen eventually goes black, keep holding the Vol+ button for some time.
- Sometimes it works to keep holding the Vol+ button for only a second or two. Sometimes I must hold it up to 30 seconds.
7. Press and hold the power-button in addition to the Vol+
8. Wait for CWM-Recovery to start.
Thank you very much for your help.
Now I think I can try for ICS!
imsonica said:
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Click to expand...
Click to collapse
Try Vol- and Power ON
updated Kitkat firmware flasher (no firmware included)
instructions in download
use at own risk
downgrading requires Unlocked Boot Loader and a full factory wipe / reset before downgrading
https://mega.co.nz/#!Ct9CQL4a!8c_q2nfGUZdz3MRtd_iKMU4K-8AacAw180VG46jWLVE
IF YOU DIRTY FLASH 5.0.2 TO 4.4.4 YOU WILL GET A SOFT BRICK
AND WILL NEED TO
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
was trying to root my lg stylo 2 Walmart family mobile(t-mobile) and i unlocked the bootloader and installed twrp but it just says no command when i boot into recovery.
Then you didn't flash the recovery properly, it's fairly simple. If you're able to get fastboot (shut off the phone totally, hold Volume Down and plug in the USB cable attached to a computer, it should go into fastboot mode almost instantly, if not then there's an issue someplace).
After that using fastboot with the recovery img file for TWRP:
Code:
fastboot flash recovery (recovery_file).img
Wait, if it says flashing successful then before you do anything else, type the following:
Code:
fastboot reboot (but do NOT press Enter yet)
Get the phone in your hand, still connected to the USB cable, and get your fingers on the Volume Down + Power button but don't put them just yet. Carefully tap the Enter key with a pinky or something to trigger the device reboot, press and hold Volume Down + Power till you see the LG logo, let Power go for a split second (still holding Volume Down) then press Power again and hold it till TWRP loads.
If that doesn't work - and I've done that hundreds of times - there's something going on with your device, perhaps the bootloader isn't truly unlocked - that checkbox in Developer Options doesn't mean it's unlocked, it just means it can be.
Ensure you followed this: https://docs.google.com/document/d/1xRfGs-w2R_54IB8cVtIj3FTmm5GY0W1Yv4SqDhVHZ-Q/edit?usp=sharing
there's a video tutorial floating around here somwhere
Got a broken power button and need to turn on your OnePlus X?
As long as one of your volume buttons and your microUSB port still work, you're lucky.
If the volume down button is working:
1. Press and hold the volume down button.
2. Connect to a USB power source.
3. The phone should vibrate and boot into the recovery. You can release the volume button at that point.
4. If you have the stock OnePlus recovery installed just tap "English", "Exit" (if present), then "Reboot".
5. Your phone should now boot up!
If only the volume up button is working, things get a bit tricky.
Before you start, read through all of the steps and the paragraph below to make sure this goes as smooth as possible.
1. Connect your device to a USB power source without pressing any button.
2. Wait for about half a second, then press and hold the volume up button.
3. If you've hit the right moment, your device will boot to fastboot mode.
4. Connect to a PC and run the command "fastboot reboot".
(If you don't know what fastboot is or you haven't set it up yet you should be able to find plenty of guides online.)
A word of caution on finding the right moment to hit the volume button:
Start with longer delays and work from there. If you hit the volume up button too early the phone will enter EDL mode, which can be hard or annoying to get out of. EDL is Qualcomm's low-level Emergency Download Mode which allows flashing the device.
When entering EDL mode the phone won't vibrate and the screen will stay off. The phone remains in EDL mode after disconnecting the USB plug.
Normally you could press and hold the power button until a hard reset to get out of there, but in this case you have the following options:
- Unplug the battery to power down the device completely if your device happens to be open.
- Wait? For as long as it takes for your device to reset from this mode on its own or for the battery to run out. idk, good luck.
- Use an EDL mode flashing tool on a PC to send the power reset command to your device. This could be viable if you have already used such a tool before, e.g. by following the "Mega UnBrick Guide" by Naman Bhalla. Alternatively you could dive into this cross platform command-line tool, which works on WIndows, Linux and macOS. Using this approach is a bit overkill and quite the tangent from what you're actually trying to do, but being able to make use of EDL can come in handy in other situations as well when you're tinkering with your Android device so taking that detour might just be worth the time.
Awesome, it worked for me.
-Incase you have entered into EDL mode, then continue charging your mobile, it will be back to old state after sometime (12 hours maybe).
- To get fastboot mode, first insert power cable then wait for vibration/ screen light illumination after that press volume up button. if you press volume up button before inserting power cable, then it will go to EDL mode, so be careful about it.
I made a TWRP nandroid backup then restored it after flashing a ROM. This put my phone into a bootloop.
It seems that the only way to access TWRP on the LG G6 is by booting the phone and choosing factory reset from the settings menu. This is the only phone I've owned where I can't simply boot into TWRP through a key combination.
I cannot use ADB because ADB is inaccessible from a bootloop.
Is my phone useless or is there another way to access TWRP?
I was in a similar situation a while back. I think to get into TWRP I held the power button & volume down simultaneously until it asked to factory reset or wipe. I really don't recall. It may have even be the volume up button. Try both and see if it works. If it asks to reset/wipe...whatever it ends up saying, just select YES. It should then boot you to TWRP. It did for me, if I recall correctly.
Goof luck! Hope it helps..
To get in TWRP with button combination:
1 - Hold both Volumes Down key and Power button until the LG Logo is displayed.
2 - Keep holding Volume Down and release the Power button for 1 sec. Then hold it again until the recovery mode is displayed.
3 - Use the Volumes buttons to navigate and select yes for both questions.
You normally should be now in TWRP.