Hey everyone -
Apologies if this has been asked before, but a simple search didn't turn up results. Verizon (surprise surprise) is already lagging behind on firmware updates. For those of us who are S-Off, unlocked, and on custom ROMs, is it possible to flash an updated firmware (such as 1.80.617.1) and still use our phones? Or are we stuck on Verizon's release cycle for firmware updates?
EDIT - I meant to post this in the Questions & Answers section, my apologies. If any mods want to move it, please feel free.
btonetbone said:
Hey everyone -
Apologies if this has been asked before, but a simple search didn't turn up results. Verizon (surprise surprise) is already lagging behind on firmware updates. For those of us who are S-Off, unlocked, and on custom ROMs, is it possible to flash an updated firmware (such as 1.80.617.1) and still use our phones? Or are we stuck on Verizon's release cycle for firmware updates?
EDIT - I meant to post this in the Questions & Answers section, my apologies. If any mods want to move it, please feel free.
Click to expand...
Click to collapse
we're stuck on verizon's firmware. i use viper and the software is updated to the latest release, just not using the eu/intl firmware.
btonetbone said:
Hey everyone -
Apologies if this has been asked before, but a simple search didn't turn up results. Verizon (surprise surprise) is already lagging behind on firmware updates. For those of us who are S-Off, unlocked, and on custom ROMs, is it possible to flash an updated firmware (such as 1.80.617.1) and still use our phones? Or are we stuck on Verizon's release cycle for firmware updates?
EDIT - I meant to post this in the Questions & Answers section, my apologies. If any mods want to move it, please feel free.
Click to expand...
Click to collapse
If you are on Verizon you should be using Verizon firmware. Just because a version number is different doesn't mean it's ahead. They are different forks tested and tweaked for entirely different networks.
Sent from my HTC6545LVW using Tapatalk
dottat said:
If you are on Verizon you should be using Verizon firmware. Just because a version number is different doesn't mean it's ahead. They are different forks tested and tweaked for entirely different networks.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
But does that hold true when flashing the Verizon radio behind the other firmware?(not challenging your statement here, just asking a variation of the OP question)
I think that is the main thing people want to know when this topic comes up. I've seen the question and information on it scattered in pieces across multiple threads, but never fully answered by being backed with a report by someone who did it.
So you don't think I am one of those that just sits back to let someone else do the work - I am willing to try such a thing by flashing the US unlocked or Europe FW followed by the VZW radio you pulled, but would need a little guidance in terms of how to provide feedback. Test signal before/after? I know from Viper thread loss of camera is something to watch out for. Any other specific items/parameters to check before/after? Since Viper just did a re-base, I have been searching and debating between those two FW anyway. First the Euro to match the ROM, then the US because they have the ROM flashing on all FW out at the moment.
camparks said:
But does that hold true when flashing the Verizon radio behind the other firmware?(not challenging your statement here, just asking a variation of the OP question)
I think that is the main thing people want to know when this topic comes up. I've seen the question and information on it scattered in pieces across multiple threads, but never fully answered by being backed with a report by someone who did it.
So you don't think I am one of those that just sits back to let someone else do the work - I am willing to try such a thing by flashing the US unlocked or Europe FW followed by the VZW radio you pulled, but would need a little guidance in terms of how to provide feedback. Test signal before/after? I know from Viper thread loss of camera is something to watch out for. Any other specific items/parameters to check before/after? Since Viper just did a re-base, I have been searching and debating between those two FW anyway. First the Euro to match the ROM, then the US because they have the ROM flashing on all FW out at the moment.
Click to expand...
Click to collapse
So here's the thing... you will see unlocked users who simply flashed the radio complain they often get stuck on 3g/1x. You will see the posts about the camera loss. You will see things about loss of volte. The firmware is always optimized for the rom/carrier for which it was written. They won't include vzw fixes in unlocked firmware since that phone isn't targeted for use on the vzw network.
Between the rom and the firmware it's really just a different fork altogether. They aren't mean to be used without each other as a dependency.
Euro firmware will likely have some odd wifi side effects for some folks as they use different bands over there.
dottat said:
So here's the thing... you will see unlocked users who simply flashed the radio complain they often get stuck on 3g/1x. You will see the posts about the camera loss. You will see things about loss of volte. The firmware is always optimized for the rom/carrier for which it was written. They won't include vzw fixes in unlocked firmware since that phone isn't targeted for use on the vzw network.
Between the rom and the firmware it's really just a different fork altogether. They aren't mean to be used without each other as a dependency.
Euro firmware will likely have some odd wifi side effects for some folks as they use different bands over there.
Click to expand...
Click to collapse
So can we back up just a bit to where I believe this all stems from - Is the HTC 10 truly a single-hardware phone? Therein, making all "variants" manifested only by which firmware is flashed? Is that true globally? If not, is that true for all in a particular "zone"(Europe, Asia, US, etc.)?
Ok, with the Euro FW the issues are apparent, given different standards not only for cellular, but also the camera and wi-fi vary from those here in the US. Even if one were to flash a US carrier radio, the camera and wi-fi issues could still pop up. Moving on from that consideration.
For US unlocked, there should be no standards issue, correct? Assuming hardware is the same for atleast all US carriers, what besides the radios would differ between carriers when not running stock ROMs?
Obviously there would be issues when on stock ROMs due to custom apps, features, etc. that would break not only when running different non-stock FW, but also when running one carrier's stock ROM on another carrier's network. All that is ill-advised and goes back to you only recommending stock FW.
Thanks for discussing this. I do not question your advise at all, I just want to explore the what and why of it all to put it all in one place. Thanks for humoring me and my questions!
camparks said:
So can we back up just a bit to where I believe this all stems from - Is the HTC 10 truly a single-hardware phone? Therein, making all "variants" manifested only by which firmware is flashed? Is that true globally? If not, is that true for all in a particular "zone"(Europe, Asia, US, etc.)?
Ok, with the Euro FW the issues are apparent, given different standards not only for cellular, but also the camera and wi-fi vary from those here in the US. Even if one were to flash a US carrier radio, the camera and wi-fi issues could still pop up. Moving on from that consideration.
For US unlocked, there should be no standards issue, correct? Assuming hardware is the same for atleast all US carriers, what besides the radios would differ between carriers when not running stock ROMs?
Obviously there would be issues when on stock ROMs due to custom apps, features, etc. that would break not only when running different non-stock FW, but also when running one carrier's stock ROM on another carrier's network. All that is ill-advised and goes back to you only recommending stock FW.
Thanks for discussing this. I do not question your advise at all, I just want to explore the what and why of it all to put it all in one place. Thanks for humoring me and my questions!
Click to expand...
Click to collapse
Hardware wise most are the same. And you are right about me recommending firmware that matches your carrier. That aside, my experience has been like this....
I have been asked a couple times to try to fully convert a phone from one carrier to another. On the 10, we know that unlocked<->verizon works and we thought it would since HTC gave them the same MID (different CIDs though). On the m9, I have attempted to fully convert a verizon m9 to an ATT model. The RUU flashes everything BUT tp and one or two other ones. It boots up fine (att death star and all)... but it will never boot to recovery and never load TWRP when flashed. There's something about the overall partition structure that makes it different.
On the rom/firmware front.... Verizon and HTC do very specific testing for firmware/OS releases. They do this not only to ensure optimal performance for the user, but also to make sure that the phone itself doesn't cause issues on the network itself. As the manager of an engineering team for a huge US based ISP, I can tell you that firmware of devices CAN and DOES impact the network stability from time to time. I'm not talking about capacity issues, I'm talking about your phone making a phone call and causing a network card back at the CO/Tower/ETC reset. It does happen.
Lastly, I measure things by what you gain. What would gain by flashing unlocked or EU firmware images onto a phone on the verizon network? An increase in number version? As much as I see people who change their aboot do so to avoid red text, it always surprised me to see a VZW phone with a third X.X.401.X number on their bootloader indicating non-vzw firmware. There's a new piece of fun around since the m9 and present on the 10. If you manage to get an aboot on your phone doesnt match your firmware and you reboot the phone you will be stuck in bootloader with no access to download/recovery and often OS. The only fix is to manually flash each firmware image / partition file by name manually and it must match the aboot for it to work. So that's another reason to not go and mix and match because to be honest... most people don't make it beyond the panic moment of that. That phone gets returned and added to the reasons verizon makes it more difficult going forward.
\
There's my 2 cents
Hi Friends,
Hope you're all having a great new year. So last time I was lurking the S7E forums, we had a leaked Engineering Bootloader that was used to acquire root on all US Snapdragon models, albeit, with a lot performance issues and etc.
I came here to glance as well as all other variant forums for the SD model and now we have Root for every model, with even ROMs being baked like the Echo ROM for Verizon, Sprint, AT&T models, usually the toughest to achieve these things on. I'm trying to read through the forums, but I fear I'm missing the details, that will help me pull the trigger for getting the device or not.
Can one of you very experienced, knowledgeable, and kind members educate me on the latest?
1. Do we have unlocked Bootloader and Root for all US carrier S7Es? How is it done? I use people using Flashfire. So no TWRP?
2. Does this process still trip Knox and render Samsung Pay to never be used again on the device?
3. If I bought the Verizon variant, for example, can I root, unlock Bootloader, and etc, and then return to stock, to return to the store in case I don't like the phone?
4. Xposed Framework working for all models?
Much appreciate your responses, any and all of them in advance! Thanks!
ProFragger said:
Hi Friends,
Hope you're all having a great new year. So last time I was lurking the S7E forums, we had a leaked Engineering Bootloader that was used to acquire root on all US Snapdragon models, albeit, with a lot performance issues and etc.
I came here to glance as well as all other variant forums for the SD model and now we have Root for every model, with even ROMs being baked like the Echo ROM for Verizon, Sprint, AT&T models, usually the toughest to achieve these things on. I'm trying to read through the forums, but I fear I'm missing the details, that will help me pull the trigger for getting the device or not.
Can one of you very experienced, knowledgeable, and kind members educate me on the latest?
1. Do we have unlocked Bootloader and Root for all US carrier S7Es? How is it done? I use people using Flashfire. So no TWRP?
2. Does this process still trip Knox and render Samsung Pay to never be used again on the device?
3. If I bought the Verizon variant, for example, can I root, unlock Bootloader, and etc, and then return to stock, to return to the store in case I don't like the phone?
4. Xposed Framework working for all models?
Much appreciate your responses, any and all of them in advance! Thanks!
Click to expand...
Click to collapse
Absolutely nothing has changed on root (only possible due to ENG kernel) and bootloader unlock (which is not yet possible).
1. No
2. No
3. No
4. No idea about all models. For the t-mobile one, please check: https://forum.xda-developers.com/tmobile-s7-edge/how-to/guide-installing-xposed-framework-t3414718
You can use the search feature in xda for finding out
CravingMender9 said:
Absolutely nothing has changed on root (only possible due to ENG kernel) and bootloader unlock (which is not yet possible).
1. No
2. No
3. No
4. No idea about all models. For the t-mobile one, please check: https://forum.xda-developers.com/tmobile-s7-edge/how-to/guide-installing-xposed-framework-t3414718
You can use the search feature in xda for finding out
Click to expand...
Click to collapse
Hey bud, thanks for getting the ball rolling on these questions. If you could add some more information, I'd appreciate it :
If we still don't have a way to Root or Unlock bootloader, how are these ROMs (Echo, Tek, and other stock ROMs) available with root? And how are these flashed? Are we somehow bypassing the BL by using FlashFire?
Can you also educate me on the U Firmware and why people install it and is it reverseable?
Lastly, if I got a T-Mobile variant for example, installed these ROMs Tek, Echo, etc, can I return to Stock completely and return to T-Mobile, by any chance for them to take it back? Thank you again!
for the t mobile variant, I was able to flash the U firmware and flash back to stock t mobile. NOTE: I did not flash the U bootloader. I kept the T mobile bootloader just be sure I could flash back to stock t mobile(APK1). I'm sure this method would work with other carriers as well. so what ever variant you have, make sure you stay on that BL and only flash the U firmware CSC and AP. As for the CP(modem) I would flash your carriers latest CP file. That's what worked best for me with the U firmware. Currently I'm using the latest nougat BETA
Thank you very much for your response, bud. One last follow up question: Since all the US variants are rooting based on the ENG Kernel, is there really a benefit of getting one variant over another, for rooting or etc purposes?
P. S. May I ask why you flashed the U Firmware? What are the advantages of it? ?
ProFragger said:
Thank you very much for your response, bud. One last follow up question: Since all the US variants are rooting based on the ENG Kernel, is there really a benefit of getting one variant over another, for rooting or etc purposes?
P. S. May I ask why you flashed the U Firmware? What are the advantages of it?
Click to expand...
Click to collapse
The u firmware basically does not include all of the software that is usually included with the phone. For example.. Tmobile with their software on it, Verizon att etc... Makes the phone a bit snappier especially if you were to root. Even tho I hope for a more stable root still. I am rooted at the moment. Wish they didn't recall the note 7 because the root on that was better
ProFragger said:
Hi Friends,
Hope you're all having a great new year. So last time I was lurking the S7E forums, we had a leaked Engineering Bootloader that was used to acquire root on all US Snapdragon models, albeit, with a lot performance issues and etc.
I came here to glance as well as all other variant forums for the SD model and now we have Root for every model, with even ROMs being baked like the Echo ROM for Verizon, Sprint, AT&T models, usually the toughest to achieve these things on. I'm trying to read through the forums, but I fear I'm missing the details, that will help me pull the trigger for getting the device or not.
Can one of you very experienced, knowledgeable, and kind members educate me on the latest?
1. Do we have unlocked Bootloader and Root for all US carrier S7Es? How is it done? I use people using Flashfire. So no TWRP?
2. Does this process still trip Knox and render Samsung Pay to never be used again on the device?
3. If I bought the Verizon variant, for example, can I root, unlock Bootloader, and etc, and then return to stock, to return to the store in case I don't like the phone?
4. Xposed Framework working for all models?
Much appreciate your responses, any and all of them in advance! Thanks!
Click to expand...
Click to collapse
You're confused. At least, you were.
We do not have an "unlocked Bootloader" and we never did. We had an engineering kernel. That engineering kernel allows certain commands that enabled us to acquire root access. But without that kernel, the system (with the original kernel or boot partition) checks for any changes in the /system partition. If any are found it triggers a bootloop. So basically, if you want root we MUST have the engineering kernel. Unless someone else finds another way that's just the way that it is.
Personally, I unrooted and went back to stock. Root was okay at first but with the lack of development, Samsung Pay and the fact that Android 7+ will probably not be seeing root... well... time to accept the fact that Samsung owns the phone even though we bought it. What else can we do?
nitroevo said:
The u firmware basically does not include all of the software that is usually included with the phone. For example.. Tmobile with their software on it, Verizon att etc... Makes the phone a bit snappier especially if you were to root. Even tho I hope for a more stable root still. I am rooted at the moment. Wish they didn't recall the note 7 because the root on that was better
Click to expand...
Click to collapse
Binary100100 said:
You're confused. At least, you were.
We do not have an "unlocked Bootloader" and we never did. We had an engineering kernel. That engineering kernel allows certain commands that enabled us to acquire root access. But without that kernel, the system (with the original kernel or boot partition) checks for any changes in the /system partition. If any are found it triggers a bootloop. So basically, if you want root we MUST have the engineering kernel. Unless someone else finds another way that's just the way that it is.
Personally, I unrooted and went back to stock. Root was okay at first but with the lack of development, Samsung Pay and the fact that Android 7+ will probably not be seeing root... well... time to accept the fact that Samsung owns the phone even though we bought it. What else can we do?
Click to expand...
Click to collapse
Thanks for your helpful responses fellas. I understand root is not perfect, but for some folks like me, Xposed seems to be worth the trouble. For Samsung Pay, I intend to use the Gear S3 one day ?.
Final question, since all US Snapdragon models are using the engineering kernel to root and etc... Is there a benefit of getting one carrier variant, over another? For example, Verizon is usually the cheapest. Is it wise to get that, with the U Firmware, to use on AT&T? Thanks!
ProFragger said:
For Samsung Pay, I intend to use the Gear S3 one day .
Final question, since all US Snapdragon models are using the engineering kernel to root and etc... Is there a benefit of getting one carrier variant, over another? For example, Verizon is usually the cheapest. Is it wise to get that, with the U Firmware, to use on AT&T? Thanks!
Click to expand...
Click to collapse
Let me know if that works out for you then.
I just purchased the S2 Classic (on T-Mobile) and use Samsung Pay quite a bit. But I can tell you that it does open Samsung Pay on the phone and if you are rooted, Samsung Pay will not work at all. So I'm not sure if it will work at all for you even with the S3.
In regards to your other inquiry, I haven't tried the U firmware. I read something about data issues, no wifi calling (which is pretty important to me), no hotspot (which is also really important to me) but I heard that it is really fast. Not sure how much of that is still a problem but you should probably read up on it before doing anything first. But the rooting method is all the same between carriers I believe. All require the engineering kernel and breaks Samsung Pay along with a couple of other apps.
Just make back ups, have a stock firmware available to flash with ODIN just in case and remember that it's almost impossible to brick this device (because we don't have an unlocked bootloader.)
Binary100100 said:
Let me know if that works out for you then.
I just purchased the S2 Classic (on T-Mobile) and use Samsung Pay quite a bit. But I can tell you that it does open Samsung Pay on the phone and if you are rooted, Samsung Pay will not work at all. So I'm not sure if it will work at all for you even with the S3.
In regards to your other inquiry, I haven't tried the U firmware. I read something about data issues, no wifi calling (which is pretty important to me), no hotspot (which is also really important to me) but I heard that it is really fast. Not sure how much of that is still a problem but you should probably read up on it before doing anything first. But the rooting method is all the same between carriers I believe. All require the engineering kernel and breaks Samsung Pay along with a couple of other apps.
Just make back ups, have a stock firmware available to flash with ODIN just in case and remember that it's almost impossible to brick this device (because we don't have an unlocked bootloader.)
Click to expand...
Click to collapse
Thank you again for a helpful post. So the S3 has a dedicated MST/NFC chip in it, that allows for Samsung Pay to work from the watch, it's done through the Gear app. That's what I have read.
About the rest of it, again, curious to see if there is one US variant, superior to another in terms of Root capabilities or bands and radios available and etc? Can anyone confirm this for me?
Thanks!
ProFragger said:
Thank you again for a helpful post. So the S3 has a dedicated MST/NFC chip in it, that allows for Samsung Pay to work from the watch, it's done through the Gear app. That's what I have read.
Click to expand...
Click to collapse
So does the S2.
When I was setting up the Samsung Pay on my watch it said that it had to download an update.
Then I went through the setup process through my phone which was from the Samsung Pay app.
You go to "Add card" on your watch and it opens Samsung Pay on your phone.
You click "Next" and it displays your Samsung account information.
Then it takes you to a screen that says "Setup complete" telling you that you're ready to use it and at the bottom says "Add card"
You do that all from the Samsung Pay app on your phone which leads me to suspect that if you root your phone, you won't be able to use Samsung Pay on your watch.
People on this thread that you have to set it all up first, remove the Samsung Pay app on the phone but leave it on the watch. If it's all done correctly then it should work. Just make sure you get it all set up first.
Next thing that I'm going to try is using my watch in "Standalone" with my phone out of bluetooth or wifi range. See if that still works.
ProFragger said:
About the rest of it, again, curious to see if there is one US variant, superior to another in terms of Root capabilities or bands and radios available and etc? Can anyone confirm this for me?
Thanks!
Click to expand...
Click to collapse
As far as I know, the U firmware permits use of some other bands that aren't normally used. Not sure which ones though.
Binary100100 said:
So does the S2.
When I was setting up the Samsung Pay on my watch it said that it had to download an update.
Then I went through the setup process through my phone which was from the Samsung Pay app.
You go to "Add card" on your watch and it opens Samsung Pay on your phone.
You click "Next" and it displays your Samsung account information.
Then it takes you to a screen that says "Setup complete" telling you that you're ready to use it and at the bottom says "Add card"
You do that all from the Samsung Pay app on your phone which leads me to suspect that if you root your phone, you won't be able to use Samsung Pay on your watch.
People on this thread that you have to set it all up first, remove the Samsung Pay app on the phone but leave it on the watch. If it's all done correctly then it should work. Just make sure you get it all set up first.
Next thing that I'm going to try is using my watch in "Standalone" with my phone out of bluetooth or wifi range. See if that still works.
As far as I know, the U firmware permits use of some other bands that aren't normally used. Not sure which ones though.
Click to expand...
Click to collapse
Thanks for the correction/education on the S2, bud, much appreciated. I wonder if the rooted phone works with the S3, because Samsung has allowed many other non Samsung phones to know work with the S3? But I could be wrong, I thought it was open like that with the S2 as well, no? Looking forward to your testing, hope there is a breakthrough in there! ?
if you want root and customizability and roms, just don't get this phone. you will be very disappointed with the performance once you root and it gets so much worse with Xposed. not worth it at all, you will have better performance and speed from a 4 year old phone that has an unlocked bootloader and strong development. I mean my Nexus 5 (from 2012) had better performance than my rooted S7. it sounds like you do want roms, and if you want roms then AOSP/Cyanogenmod is the way to go. there will probably never be any AOSP or CM ROM on the QC S7/E so you're better off getting an older galaxy model that does have a great development community and unlocked bootloader. or just get a OnePlus or Nexus or something.
xVermicide said:
if you want root and customizability and roms, just don't get this phone. you will be very disappointed with the performance once you root and it gets so much worse with Xposed. not worth it at all, you will have better performance and speed from a 4 year old phone that has an unlocked bootloader and strong development. I mean my Nexus 5 (from 2012) had better performance than my rooted S7. it sounds like you do want roms, and if you want roms then AOSP/Cyanogenmod is the way to go. there will probably never be any AOSP or CM ROM on the QC S7/E so you're better off getting an older galaxy model that does have a great development community and unlocked bootloader. or just get a OnePlus or Nexus or something.
Click to expand...
Click to collapse
Or a Exynos S7.
Binary100100 said:
Or a Exynos S7.
Click to expand...
Click to collapse
exactly this. except for some reason I thought exynos variants are lacking certain bands/features on American networks. could be wrong.
xVermicide said:
if you want root and customizability and roms, just don't get this phone. you will be very disappointed with the performance once you root and it gets so much worse with Xposed. not worth it at all, you will have better performance and speed from a 4 year old phone that has an unlocked bootloader and strong development. I mean my Nexus 5 (from 2012) had better performance than my rooted S7. it sounds like you do want roms, and if you want roms then AOSP/Cyanogenmod is the way to go. there will probably never be any AOSP or CM ROM on the QC S7/E so you're better off getting an older galaxy model that does have a great development community and unlocked bootloader. or just get a OnePlus or Nexus or something.
Click to expand...
Click to collapse
Binary100100 said:
Or a Exynos S7.
Click to expand...
Click to collapse
xVermicide said:
exactly this. except for some reason I thought exynos variants are lacking certain bands/features on American networks. could be wrong.
Click to expand...
Click to collapse
Very helpful inputs guys, thank you! If I were to be honest with myself, I don't want AOSP/CM/Lineage, especially on a Samsung phone, so unlocked bootloader is not a deal breaker for me. However, I think root is cool for me for doing some SystemUI tweaks, Xposed and etc. Exynos was an option I was exploring, but lack of warranty, no Samsung Pay, and the price are enough to keep me at bay. I think I just need to put my big boy pants on and try to use a phone without rooting it. Something I have yet to do in EVER using an Android phone since about 10 years ago, and I have never ever used or bought an iCrap... I mean... an iPhone !
ProFragger said:
Very helpful inputs guys, thank you! If I were to be honest with myself, I don't want AOSP/CM/Lineage, especially on a Samsung phone, so unlocked bootloader is not a deal breaker for me. However, I think root is cool for me for doing some SystemUI tweaks, Xposed and etc. Exynos was an option I was exploring, but lack of warranty, no Samsung Pay, and the price are enough to keep me at bay. I think I just need to put my big boy pants on and try to use a phone without rooting it. Something I have yet to do in EVER using an Android phone since about 10 years ago, and I have never ever used or bought an iCrap... I mean... an iPhone !
Click to expand...
Click to collapse
Get a One+ 3T good development and really nice phone if you want root. Root is dead on Samsung phones and so are ROMs.
So by reading thru this thread, I assume having a T-mobile S7E (G935T) rooting is pointless and really not available the way I'm used to it coming from a Note 4. That's kind of a bummer... I've been using Android and have always had ROOT and all the goodies that come with it. And I recently starting really enjoying my Note 4 with all the cool development in Note 7 ported roms oh well... I wonder if the S7E is enough of an upgrade to keep my interest as stock?
I see there is a G935U firmware, but that seems a bit hit and miss? But I'm just starting to read up on all this... :good:
ShrekOpher said:
Get a One+ 3T good development and really nice phone if you want root. Root is dead on Samsung phones and so are ROMs.
Click to expand...
Click to collapse
Believe me bud, if Oneplus 5 or even 3T had an SD Card, I'd already have that phone, but thanks for your wisdom !
Araltd said:
So by reading thru this thread, I assume having a T-mobile S7E (G935T) rooting is pointless and really not available the way I'm used to it coming from a Note 4. That's kind of a bummer... I've been using Android and have always had ROOT and all the goodies that come with it. And I recently starting really enjoying my Note 4 with all the cool development in Note 7 ported roms oh well... I wonder if the S7E is enough of an upgrade to keep my interest as stock?
I see there is a G935U firmware, but that seems a bit hit and miss? But I'm just starting to read up on all this... :good:
Click to expand...
Click to collapse
You and I both man... The last few years, I have lived off the mercy of T-Mobile and their BLs being unlocked. But Samsung sure done them all in ! Even the International unlocked ones disable Samsung Pay (forever, mind you!) if Knox is tripped, which I believe it is, when rooted and TWRP'd.
As I understand it,
Android pay / Samsung pay is why they frown on rooting now. I can understand it, though I don't agree with it.
The first time someone's financial information is compromised, and they've ever used one of the "pay" methods, on a rooted device the pr nightmare that would ensue would make the note 7 fiasco look like child's play.
"Samsung unsecured device compromises persons credit card information today, while Apple is still secure" I can see the headline.
Sent from my Samsung Galaxy S7E
This is a tough call but all things considered, I should really flash back to complete stock. It's definitely the 1st time I've gone without root.
I need a reliable phone right now. There's some great people trying to make the most out of this with the Eng kernel, but ultimately I running into problems (sometimes it'll run great for over a week but then the issues become apparent. )
That said, I'm told Ufirmware has a problem with getting Doze to work properly. The result is poor battery life.
So my question is what would be the best fw to use?
My model is SM-G935U
CARRIER: AT&T in the USA
***first samsung phone for me and the most confusing part is all the different variants. Should I download xxa?
If you want the best experience on the network, I'd suggest SM-G935A. Sure, it has the carrier bloat, but I don't have an issue disabling the ones I don't use.
Sent from my SM-G955U using Tapatalk
1) The U firmware does not have a doze problem. It gets far better battery life than the A version.
2) This device does not work well with root. You *can* root, but most people seem to go back to stock at some point due to all the glitches and patches required.
3) The U firmware will work just fine on AT&T, but you will lose carrier specific features. Specifically, WiFi calling, VoLTE, etc. (You can get most of the others back by installing APKs)
4) The A firmware obviously will work fine on AT&T, but AT&T really gimped the bajeezus out of the S7 Edge Nougat ROM. I was getting unacceptable lag on bone stock A firmware.
5) You *can* disable packages on either using various Knox-based tools, but in some cases this can actually make things worse depending on how the package is used.
You just need to decide which is more important. Fast and battery efficient, but "bare bones"; or full featured, but a hot, laggy mess?
I was rooted using the samsung u firmware on the att model. I lost my phone a week ago and the insurance sent me a brand new one thankfully. I really didn't have any complaints when I was using the rooted s7 edge. But when I got this new one full att stock. It is quite clear to me now it is night and day difference. The rooted version right now is ok and usable but i will not be rooting my new s7 edge. This phone just flies with stock compared to eng root which just putts along.
jshamlet said:
1) The U firmware does not have a doze problem. It gets far better battery life than the A version.
2) This device does not work well with root. You *can* root, but most people seem to go back to stock at some point due to all the glitches and patches required.
3) The U firmware will work just fine on AT&T, but you will lose carrier specific features. Specifically, WiFi calling, VoLTE, etc. (You can get most of the others back by installing APKs)
4) The A firmware obviously will work fine on AT&T, but AT&T really gimped the bajeezus out of the S7 Edge Nougat ROM. I was getting unacceptable lag on bone stock A firmware.
5) You *can* disable packages on either using various Knox-based tools, but in some cases this can actually make things worse depending on how the package is used.
You just need to decide which is more important. Fast and battery efficient, but "bare bones"; or full featured, but a hot, laggy mess?
Click to expand...
Click to collapse
Thanks for the info!
Wish I'd waited just a bit longer. I wound up flashing xaa. Performance wise, it's good. Battery is also fine but I think right now WiFi Calling would be very useful. A family member just moved to an Island and the cell service is fair if it even works.
That's disappointing about 935A fw. Is it really laggy?
Also after flashing I couldnt write to my external sdcard. The system could but I lost those permissions and after much trial &error, I had to factory reset. Still not entirely sure why but it's been awhile since my phones had an sd slot. Think I recall removing it every time I flashed a new rom or even an update. Is that what you do?
Edit-it just occurred to me I downloaded the fw for my model G935U so I believe I am using the U firmware. I don't remember what xxa means. I think it applies to the region?