Database Users

Bricked epic4g using odin

I know there are various threads like this one but my situation is a bit different. I tried using odin to clean install 2.2 to then use the custom rom epic experience. I attempted to install 2.2 using odin but it would get stuck in "setup connection" and I would have to quit and try again. Last time I tried my phone got the "phone connection caution computer" icon and to get into recovery I would have to hold the power and camera button, not the volume down button. When I go to try and install things straight from my SD card I would get an error like "status 7" cus I didn't have the sprint apps to install 2.2. I believe I get these errors installing straight from the card cus I rooted my phone, modifying the kernal cus I read somewhere because when trying to update, it tries to verify but can't cus things are missing or edited cus of the root. I can't try to use odin again because my computer can't recognize the phone anymore regardless reinstalling the samsung drivers. SOOOO, I'm basically ****ing stuck for sure I think. The way I access the SD card is by using an adapter. The only way I see this working is if I find a fix using the SD card, but it's looking slim cus of the stupid root.

I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!

mxcoldhit said:
I don't know much about this yet, as I'm still learning myself. Did you try using another usb port and are you putting the phone in download mode?. Restart the computer and the phone. Make sure odin is running before you plug in the phone as well. And try another usb port. Are you using the cable that came with the phone? That one trends to have problems for some people.
Edit: I don't believe your phone is bricked either, people tend to throw the word around to much because that arnt quite sure about the definition. Just hang in there and the community will help you get back up and running. Good luck
Sent from my shoe, I mean....Epic shoe... I mean Samsung Epic!
Click to expand...
Click to collapse
You see, I'm out of options. Last thing I thought of was installing a custom rom 2.1 rom cus 2.2 roms need odin, but I try to install and I get a signature error or whatever. I'm about to throw the phone against the wall, crack the screen, and use my warranty and get a new phone cus I literally tried EVERYTHING. I spent my ****ing 8 hours of my saturday trying to fix this.

Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App

cbpagent72 said:
Try a different computer my new Dell XPS 9100 will never reconize my Epic, however, my wifes laptop will always reconize it. I know that sounds weird, I always thought I had a poblem with my phone but it ended up being my computer.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
omfg, I used my mom's lappy and the drivers worked. Meaning I can try and use an odin fix.

Odin can be tricky to use because of a few factors other than itself. 1) if you can, use a deskto pc and attach to a usb port literally on the motherboard, no front or pci, this may work, but this I what I found (reading countless threads) to be the most failsafe for everyone. 2) your sammy usb cable is for charging or non critical data transfer ONLY, as it is garbage... repeatedly proven in the threads. 3) reboot pc and phone, boot phone into download mode, (hold down 1. On physical keyboard and press power... DO NOT CONNECT YET! Start up odin, place files where needed (.pit, etc...) uncheck all but what you're told in the flashing instructions with the file you're flashing, most have awesome detals, but sometimes your little issue is resolved on page 50 of the thread... not in the OP. Ok so now plug in the usb connection, odin should find it. If it doesn't, search for drivers, uninstall, reinstall start over, OR you have a bad connection, refer back to usb port and cable. I have 1 out of 4 mobo usb ports that the drivers will maintain a connection to, so try another. Then, once odin has a connection, make sure you're following the guides to the T (and read all the posts)... after that, odin is your best friend. The problem lies elsewhere... odin is the goods. If you have run into problems maintaining connection, and plan to re-root, read all the one click posts and if it drops connection a lot, enter the commands in one by one, repeat if one fails till it sticks. There are way better guides, but you seem to have run into the same issues I did, and after hours and hours, I got that scary ass reconnect me now screen. Just read the whole threads, and if your problem hasn't already been resolved, post in the appropriate thread, so others may learn from your discoveries!
Don't give up, once you figure out the quirks of the relationship between your pc and phone, and of course meticulously follow instructions, your elation when successful will make you forget that pesky 'bricked' screen... trust me I got it too, and no matter how much everyone says you can't brick these following instructions on here... its still scary till it all works. If things are wonky, wipe, go back to DI18 and start over... or just sit tight for froyo roms... good luck!
Oh, and sorry for no links, but it would seem you've probly already read em all... not sure I can do links...

Maybe its just my eeepc that doesn't like the drivers, good luck! Sounds like you're on the way... oh don't forget with the drivers to let em install on connect, leave it plugged in for like 10 mins, unplug, it will then complain it wasn't done, reconnect, then after that finishes, reboot. Crazy drivers...

At least I got a computer recognizing my phone, so I can try and use odin. I've been trying to use this fix
http://forum.xda-developers.com/showthread.php?p=9755894#post9755894
and so far odin has been stuck at this one step "file analysis..."

Yeah I used that method to no avail, but it was about 3 pasts old at the time, so I figured id try
something more stable. Tried a couple dk17 roms, then went back to 2.1 and am now using syndicate xtreme. Id suggest going back to DI18, then go from there. Let me check for another post of mine, theres a dialer code I had to do too at one point...
Ok when doing one click root, someone suggested ##8778# in the dialer, then keyboard enter, then set UART to pda not modem. This and removing comodo firewall, all the sudden my intermittent connection was solid. Not responsible for what this does, but it worked for me. Never found out what it does..... still curious. So this may help you even in odin, try to flash di18 after doing this, then the all in one rom you're looking at...

Oddly enough, I managed to semi-brick my phone several hours ago - my wireless adapter was on the same USB header, and both the wireless adapter and the phone crapped out while trying to flash with Odin.
Thankfully I was still able to get into download mode, and plugging the phone into a different USB port worked fine.

After some more research, about 10 hours of it, odin finally cooperated with me after I downloaded about every kind of file that could make my phone work and finally got it into 2.1
I first flashed the stock kernal to get it working, then flashed stock 2.1
Now I'm that my phone isn't rooted anymore I tried installing 2.2 through the recovery menu and I still get error status 7. Any ideas?

Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...

ungovernable1977 said:
Probly best to post in the thread for the package/rom you are trying to install... others using it should be able to help... or you can do a 2.1 rom and wait for a final froyo based rom... glad to hear you're not bricked... the only way I've heard you can absolutely do that with these is installing a GSM rom or something crazy like that... but non-functional phone is scary regardless...
Click to expand...
Click to collapse
Alright I completely fixed my phone. After I rooted my phone on 2.1, I then used odin v1.6 to install the froyo .tar file into pda and it worked. I then rooted it again so now I'm back to normal. Honestly, I did so many things I forgot what I did but I now have my phone functional. Thanks for help everyone, I greatly appreciate it!

Epic stuck in ClockworkMod v2.5.1.0 and won´t connect to pc

I spent all day yesterday trying to fix my Epic with no progress and feeling a little sol.
Yesterday I decided I needed a new ROM/kernel because I was averaging only 4hrs of battery life with Supernova and wanted to try Nebula ROM with EXT4. I backed up everything on my laptop and did a Nandroid backup as well. I also have Titanium backup backed up on my pc. I always always back up. I started fresh by flashing to stock and starting over. I rooted with 1 click, flashed DK28, and where I believe I screwed up is I didn´t upgrade to Clockwork 3 (looking back I don´t know wtf I was thinking by proceeding the following way), instead I went to advanced, reboot recovery and ended up rebooting my system into 2.5.1.2. I rebooted my phone and all was good, powered off, 3 fingered and I still had 2.5.1.2 so like a dumbass I figured I was good to go ahead and flash Nebula. LOL so what happened? the Rom installed, I finished like I always do and when I went to boot up my phone I flashed into v2.5.1.0 and thats where my phone stays. If I try to do anything it gives me E: Can´t open/cache/recovery/log
I tried to restore of course and I get this message. I have tried to Odin back to stock but my phone will not connect to a pc.
Heres my situation. I live in a house with 6 computers that I have attempted to connect to with no luck, 5 of these have adb and the Android SDK, several drivers (including the Epics) installed and the C drives have literally no more space. The other pc has Windows 2000 so I wondered if it won´t install the drivers or pick up my phone because its so old??? My main laptop is running Ubuntu and Im not understanding how or even if I can Odin my phone on it, besides I think this laptop won´t connect to my Epic because of the USB port and I dont have a clue how to detect or fix that. My mom has a brand new PC with Windows 7 thats never had anything connected via USB yet that I thought was worth giving a shot at. I only have the stock USB cable though and I was wondering if I bought a new cable if it would be more likely that my phone would connect.
I am not very educated on Android or computers so I prob shouldn´t have done as much flashing as I have to begin with. If I understood file systems better I would prob figure it out.
Thanks for any help or advice. If I over looked the answer in front of my face I am sorry it is because I am retarded and don´t understand computer lingo.

Are you connecting the proper way to odin?
Step 1: open odin with phone Disconnected from PC (if you dont open it first it may not recognize your phone, so i hear)
Step 2: hold 1 on keypad and power on phone --> download mode
step 3: connect phone to PC
step 4: Flash rom
if odin still isnt recognized I would suggest taking out your microsd card and put it in another phone or a microsd card reader and put a basic dk28 rom/dl18 (maybe the acs one that includes modem) rom on there then put the sdcard back in your phone and flash that in clockworkmod and see if it'll boot (wide data/cache/dalvik before doing this)
Also search the forum i'm pretty sure theres an RFS formatter somewhere that'll format your /system/data/cache back to RFS, you probably need to do that before flashing back the other rom...

So, if I understand the OP correctly, you accidentally flashed an ext4 only rom on rfs with 2.5.1.0?
This thread had a flashable reRFS conversion, just in case you need it.
This thread has a cwm flashable di18 and modem.
Those should get you up and going again with cwm 2.5.1.0. If they don't, Odin is really the answer and I don't know what to tell you.

So I tried both of your ideas and I am so pist off. I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect. Clearly my phone is the problem because the sd reader can read my sd just fine and my mom, sister and gramps connect o the same computers just fine. Ive accepted that I am ****ed at this point. I have never got this phone to stay connected to a pc and I think I hate it.

It is starting to sound like it is time to head to a sprint store.

Erica8123 said:
I am now stuck in download mode and cant get 7 freaken computers (one literally brand new with Windows 7, one with Vista, one with XP, 3 with Linux, 1 with 2000 out of being desperate with 5 different usb cords to connect.
Click to expand...
Click to collapse
Have you tried to just pull the battery out? Then, put it back in the phone and boot into CWM? Or pull the battery, then boot into recovery? I personally hate going to the Sprint store and I try every possible option before going.

If you can get another USB cable it will probably work. I use an evo cable. Also for future reference there are no custom kernels on dk28.
Sent from my Evo Killer!!!

Hey, I just wanted to update.
I had tried several usb cables to connect btw including a new one I just bought. No luck. I had tried literally everything to fix my Epic and I was super pist during my last post lol. I finally had to cave and take the block walk (literally) down to Sprint and thank God I insured my phone. He was hella cool about it, just laughed and said he doesn't want to bother with it and replaced it. I am still trying to decide what I wanna do as rooting goes (besides getting rid of pretty much every app they put on there).
Thanks again everyone

Clockwork Mod without USB

I know this is possible depending on the phone, but on the Vibrant I have not found a way to install clockwork mod without using USB. I saw that mobile odin was an option for some samsung phones but not the Vibrant.
My usb port is dead, no warranty etc. I bought it for 70 in like new condition with knowledge that the port was bad. I figured that the port needed to be soldered back down. But after taking the phone apart, I don't see anything wrong with it. Its not loose on the board, but the socket itself is loose inside.
The baseband is KA2 Eclair. I got it rooted with the oneclickroot tool.
On a side note, the phone also came with pictures of the seller and all his girlfriends naked . Not pretty

So let me review what you want to do, you want to install CWR without having a USB port. Seems easy enough.
Firstly, find a app that will let you connect to your phone to your computer, apps like Dropbox, Box, and this app i put up on these forums a bit ago will do more than just the job HERE
install one of those, which ever you like. I'll use the MIUI File Manager as a example throughout this post because its the easiest.
Open the app, go to the FTP and start service, go to your computer open MY COMPUTER and type in ftp://all your #'s
Put this file in your ROOT meaning just in sdcard/ no folders just drag and drop it in there. DO NOT RENAME,EXTRACT OR ANYTHING TO THE .ZIP just put it in the sdcard/
*Thanks for the CWR file from Woodrube and S15*
Now go into Recovery mode on your phone
Power + Volume up and down ( i think )
Press REINSTALL PACKAGES
It SHOULD say something like booting into clockwork recovery.
it will reboot, if it goes to clock work recovery, GREAT. If not, press Reinstall Packages AGAIN and it should directly go there.
Just reply if i'm explaining something wrong or if you need more help.

Or you could just download and install rom manager and flash clockworkmod through there. No offense xriderx, just seems like a lot of work to just install cwr that a single app can do as well.

djquick said:
Or you could just download and install rom manager and flash clockworkmod through there. No offense xriderx, just seems like a lot of work to just install cwr that a single app can do as well.
Click to expand...
Click to collapse
To each his own, Rom Manager never has worked great on my phone. Even bricked it completely once and I don't believe it was user error.

Relevant guide, +1 cookie. One suggestion though, organize the steps a bit further so there is a clear distinction between steps.
ie:
• Now go into Recovery mode on your phone, Power + Volume up and down ( i think )
• Press REINSTALL PACKAGES. It SHOULD say something like booting into clockwork recovery. it will reboot, if it goes to clock work recovery, GREAT. If not, press Reinstall Packages AGAIN and it should directly go there."
Anywho, to the OP: Since it's rooted, why aren't you simply downloading ROM Manager from the market and installing CWR from there?
edit/ beaten

Don't get me wrong, your tutorial is spot on, I just never had any problems with ROM manager before so I threw it out as a suggestion.
Sent from my Nexus S using xda premium

working on it now, big thanks!

TheEnternal said:
working on it now, big thanks!
Click to expand...
Click to collapse
As far as the port goes, Eugene, Krylon360 and myself all fried ours when we were porting the V4G - so you may not visibly see anything wrong with it at all.

Thanks guys, I ended up semi bricking the phone . Even though it was my 6th droid device. Not sure what I did, I was in recovery and everything was working, then went to reboot and it was stuck on the Galaxy screen, could no longer get into recovery. Too bad that USB port was out . I ended up just reselling it to a guy for parts and still made some profit off it. Shame though, that AMOLED display was beautiful. Ended up getting a G2X yesterday for 195, just missed one at 150 on craigslist. Already got it up with CM 7.2 with a minor OC. Hopefully towards then end of this year I might be able to get a Galaxy 2 for cheap.

hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.

zukko said:
hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.
Click to expand...
Click to collapse
Download the files you need to your phone and flash them
Sent from my HTC Sensation 4G using XDA

johnson8cyl said:
Download the files you need to your phone and flash them
Sent from my HTC Sensation 4G using XDA
Click to expand...
Click to collapse
i have tried this.
but gingerbread loader and froyo loader are different.
it gave an error at flashing and stopped flashing.

Hmmm. That would require fastboot huh. Don't know of a wireless way to use that. Is there an unroot procedure you could do from your sdcard without a cord and then re-root to gb perhaps?
Sent from my HTC Sensation 4G using XDA

and i'm asking for something like this.
but i ask for froyo not unroot.
to flash from sd card.

it gives an error
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5
it was necessary to remove it when upgrading to the clockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and updare-binary) to create working update zip packages.
installation aborted.

I don't think it is possible to downgrade to froyo from CM7 without ODIN. I might be wrong but that is how i remember it.
Though i did find this thread..
http://forum.xda-developers.com/showthread.php?t=1149158
But i don't know how that worked for people. You might wanna research a little bit more. IMO you are better off going to ICS.

Br1cK'd said:
Just use Odin, don't shortcut it. The OP here has a very very basic idea of the reason and necessity to change these files, and has not provided a complete set of steps in two different "guides" he has posted here, and nobody has been successful as per the reports.
Bottom line, save both yourself and dev in the future a headache, and just use Odin.
Click to expand...
Click to collapse
its very sad ((((

Just a reminder to some who have USB port problems. I'm not trying to insult anyone's intelligence here but remember Samsung phones are picky about USB cables.
I know because my phone was Semi bricked while doing Odin. Turned out my original Samsung cable went bad halfway through Odin'ing a new bootloader. After two months of playing with it I tried literally 5 different data cables that all fully worked for other phones and a few cheap off the street cables. Some would not even charge my vibrant but would work fine for data and charge on my wife's LG Quantum. Hard to find good micro-USB cables here in Peru. Finally I ended up modifying my original cable with another cable's micro-usb connector and wrapping a separate ground wire around the shield to get it to work. Samsung phones must require really good shielding to communicate and possibly not all cables have the shield connected on both sides or are properly shielded.

zukko said:
hi.
pls need help.
have the same phone. my usb is not working too.
t-mobile vibrant t959.
its CM7.2 skang-kang flashed.
have issue with mute-unmute.
and need to get it back to froyo.
how to do it without usb?
card slot is working fine.
Click to expand...
Click to collapse
Check out 'mobileODIN' on the market.

[Q] [HELP] PC does not recognise my phone after upgrading to Jelly Bean

Ok phone specs first
SGS I9000
Devil Kernel
I9000XXJVT Baseband Version
JRO03H Build number
Not sure what else is relevant.
My problem is that since I upgraded to a Jelly Bean rom (can't remember which one) my PC no longer recognizes my phone. It won't charge when connected by USB. I've tried different USB ports and checked that the cable is fine with another phone. Also, the micro(mini?) USB port on the phone is fine as I can charge from the mains.
I can't find the phone on Device Manager/My Computer and not even Odin recognises it when I plug it in. What's wrong? I've installed Kies to try and reinstall drivers, that hasn't sorted it out.
What do you think the problem is and how can I fix it?
Also, I have an idea of which ROM I may have used, but I'm not allowed to post links yet. If you search "How to upgrade the Galaxy S I9000 to Android 4.1.1 Jelly Bean via a ported stock official ROM" in google, it is the second link that comes up.
Thank you for your help.

moppy89 said:
What do you think the problem is and how can I fix it?
Click to expand...
Click to collapse
Try a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)

Ok, tried pretty much every thing there except messing with hardware. Nothing has worked.
Is there anyway of transferring files wirelessly to the phone? I can live without USB connection, but I do need to be able to stick music/files on there.
Thanks for pointing out that link btw, I'm sure it will be useful again when something else goes wrong >_>

moppy89 said:
Ok, tried pretty much every thing there except messing with hardware. Nothing has worked.
Is there anyway of transferring files wirelessly to the phone? I can live without USB connection, but I do need to be able to stick music/files on there.
Thanks for pointing out that link btw, I'm sure it will be useful again when something else goes wrong >_>
Click to expand...
Click to collapse
you can use a managing tool to do it by wireless or bluetooth, best is My phone explorer from My Android Collections
or even Mobile Odin to Flash a ROM

Samsung Galaxy S4 IG9505 Boot Stock-up Problem

Hi everyone,
I just want to ask for tips and recommendations to resolve my problem on my phone. I used TWRP to root the phone but failed and i also used kingo root apk apps on it but still failed. But after that, my phone just shut down and when i open it, it no longer boot and stocked in the samsung logo blinking. I tried KIES and ODIN apps to recover my phone in download mode but my computer didn't detect my phone. I tried also to wipe-up data using the TWRP progam on boot loader. I am not sure if was able to enable the USB Debugging on my device. What i want to try is if i can install the firmware of my phone using the TWRP but i just dont know what to do or what i needed to download. i downloaded the stock firmware of the phone but when i tried the TWRP to install it, it didnt work. I already go to the repair center but they just did what i did and they also failed to do. Please help me guys. I know that lots of members here are generous and willing to help each other. Thanks

gen0ske said:
Hi everyone,
I just want to ask for tips and recommendations to resolve my problem on my phone. I used TWRP to root the phone but failed and i also used kingo root apk apps on it but still failed. But after that, my phone just shut down and when i open it, it no longer boot and stocked in the samsung logo blinking. I tried KIES and ODIN apps to recover my phone in download mode but my computer didn't detect my phone. I tried also to wipe-up data using the TWRP progam on boot loader. I am not sure if was able to enable the USB Debugging on my device. What i want to try is if i can install the firmware of my phone using the TWRP but i just dont know what to do or what i needed to download. i downloaded the stock firmware of the phone but when i tried the TWRP to install it, it didnt work. I already go to the repair center but they just did what i did and they also failed to do. Please help me guys. I know that lots of members here are generous and willing to help each other. Thanks
Click to expand...
Click to collapse
Hey there,
First off, you can't flash stock firmware through custom recoveries. It can be done only with Odin or Heimdall.
Second, make sure you use the back USB ports of the computer and also try different windows versions.
Wiping data through recovery doesn't help because root apps are usually installed on the system partition.
You could probably flash a custom rom on it. It will at least get the phone working again. You can go from there.
Good luck.

GDReaper said:
Hey there,
First off, you can't flash stock firmware through custom recoveries. It can be done only with Odin or Heimdall.
Second, make sure you use the back USB ports of the computer and also try different windows versions.
Wiping data through recovery doesn't help because root apps are usually installed on the system partition.
You could probably flash a custom rom on it. It will at least get the phone working again. You can go from there.
Good luck.
Click to expand...
Click to collapse
Thank you.
Is the USB Debugging Option has nothing to do with the computer to detect my phone. The technician told me that they will replace the USB female socket on my phone because it was defective. I will spend much on the replacement yet i'm afraid it might not still work. The idea of installing a custom roms might work as you have said. I will try that.

gen0ske said:
Thank you.
Is the USB Debugging Option has nothing to do with the computer to detect my phone. The technician told me that they will replace the USB female socket on my phone because it was defective. I will spend much on the replacement yet i'm afraid it might not still work. The idea of installing a custom roms might work as you have said. I will try that.
Click to expand...
Click to collapse
The computer should detect your device no matter what. I mean, how else would you transfer files between the two, since USB debugging is disabled by default.

GDReaper said:
The computer should detect your device no matter what. I mean, how else would you transfer files between the two, since USB debugging is disabled by default.
Click to expand...
Click to collapse
You made me believe more that I can still restore my device. I thank you for the great support. I will do my best.