Hello, Recently i got my note 3 [firmware 4.3]. When i try to update the firmware through OTA, it fails to update. Its the same with kies. I updated it using ODIN to kitkat [Poland version]. But again it fails to update even when its updated to kitkat [Both through kies and OTA]. I noticed that my phone says its product code is not active. Whats the problem here. please HELP!!! The details [PDA, CSC...] are given in the screen shots. :crying:
ahadshah said:
Hello, Recently i got my note 3 [firmware 4.3]. When i try to update the firmware through OTA, it fails to update. Its the same with kies. I updated it using ODIN to kitkat [Poland version]. But again it fails to update even when its updated to kitkat [Both through kies and OTA]. I noticed that my phone says its product code is not active. Whats the problem here. please HELP!!! The details [PDA, CSC...] are given in the screen shots. :crying:
Click to expand...
Click to collapse
in the link below thr s a solution for same problem on Note II;
Link
test this if works or not and then write result here.
and also write more about ur phone condition;
root-bootloader & ...
x102x96x said:
in the link below thr s a solution for same problem on Note II;
Link
test this if works or not and then write result here.
and also write more about ur phone condition;
root-bootloader & ...
Click to expand...
Click to collapse
Yes i checked the link also some other threads but there's no solution to the problem
Since i'n new to android, i dont know much about it. So please tell me which conditions are you referring to?
It seems that you are already running on KitKat (4.4.2). So there is no software update available. Also CheckFus doesn't work anymore. The description of the app says:
!! This tool no longer work due to changes from Samsung. A solution is being worked on! !!
Kies needs an update to say that you already have the latest firmware.
So no worries. Everything is fine
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile
gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help
gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link
[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped
gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...
p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.
p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??
gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......
Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!
I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?
Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0
Hi,
Please I'm trying to download the following firmware( Hoping it includes French language) TNZ-J510GNDXU1APG2 for my Samsung SM-J510GN . Impossible for me to download it from sammobile and I can't download it from other sites because they don't allow resume downloads .I downloaded it many times but it always fails.Who can show me a good link.Thanks
boubazm said:
Hi,
Please I'm trying to download the following firmware( Hoping it includes French language) TNZ-J510GNDXU1APG2 for my Samsung SM-J510GN . Impossible for me to download it from sammobile and I can't download it from other sites because they don't allow resume downloads .I downloaded it many times but it always fails.Who can show me a good link.Thanks
Click to expand...
Click to collapse
SamFirm downloader . Deprecated, but works fine.
Thanks ,but is there another solution?
Hi.Have an s6 edge+ with NEE firmware...I saw in sammobile that is an update from 31.01 but nothing thru OTA or smartswitch...Anyone with NEE firmware?!¡
I am on PDA G928FXXS3BPJ7 CSC G928FNEE3BPI1.On sammobile it says that is another newer PDA G928FXXS3BQA9
CSC G928FNEE3BPI1 i search thru OTA and there in no update...Same thing with smart switch.Till now all of the updates came with no problem.I could update the phone without problem
No one has NEE firmware?!Still no update thru OTA or smart switch,and sammobile says that is a new update.
Hi mate, you can check here for firmware, download as you pleased and flash usig Odin
http://updato.com/firmware-archive-select-model?q=SM-G928F&order=date&dir=desc&exact=1
SLVMSF said:
Hi mate, you can check here for firmware, download as you pleased and flash usig Odin
http://updato.com/firmware-archive-select-model?q=SM-G928F&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
Hi.In that page there is no update...The last update from 31.01.2017,that sammobile and samsung-updates says there is one,in updato.com no such thing!.
Try flashing another country or just wait (it might take a while ) untill appears. Or you can try using SamFirm_v0.3.6 (https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) to check on samsung servers for firmware .
SLVMSF said:
Try flashing another country or just wait (it might take a while ) untill appears. Or you can try using SamFirm_v0.3.6 (https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647) to check on samsung servers for firmware .
Click to expand...
Click to collapse
The tool says that i have the latest...I dont know what happens...
Here u go, mate. This is the link for G928FXXS3BQA9 region NEE ->https://samsung-firmware.org/download/Samsung Galaxy S6 Edge+/290n/NEE/G928FXXS3BQA9/G928FNEE3BPI1/ Hit download an flash through Odin. Sry for delay
SLVMSF said:
Here u go, mate. This is the link for G928FXXS3BQA9 region NEE ->https://samsung-firmware.org/download/Samsung Galaxy S6 Edge+/290n/NEE/G928FXXS3BQA9/G928FNEE3BPI1/ Hit download an flash through Odin. Sry for delay
Click to expand...
Click to collapse
The firmware i had download it but i want to put it thru smart switch or ota because with odin and s6 edge+ i have bad experiences.Will wait a time to see if it pop ups via ota or smart switch.
It will help if somebody with nee firmware around here to see if they have the same problem.
Ok, then good luck waitin' and hope someone with NEE can help.
Cheers, mate :highfive:
New Update for NEE 15.02.2017
Hi mate, seems that you're in luck . There's a new update available for you. Check this link :
http://updato.com/firmware-archive-select-model?record=A967FDD4F3F811E69215FA163EE8F90B
Country/RegionNordic countries
Product CodeNEE
OS VersionMarshmallow(Android 6.0.1)
Release Date15.02.2017
PDAG928FXXS3BQB1
CSCG928FNEE3BPI1
PhoneG928FXXU3BQA5
Happy flashing :highfive:
they are still sharing it.
Hello which is the firmware I should download to flash through Odin. ?
I don't want to download any other that'd why I am asking
The main issue I face is that the battery is draining even if I don't use it. There are not apps in the background running but I am sure it will fix the problem.
CTF1 is the firmware you need if it's available. Check Samsung website.
StoneyJSG said:
CTF1 is the firmware you need if it's available. Check Samsung website.
Click to expand...
Click to collapse
You mean sammobile ?
Yes, sam mobile.
Is there any problem if I download different Country Number ? Mine is Eur I think from GREECE as it say but what it i install from Germany ? Thanks.