It is simple, tested on my nexus 6, just go to system/bin and delete mpdecision, then install an app that controls kernel, like kernel adiutor, raise min freq of cpu to 883000 mhz, then set apply on boot, reboot phone and enjoy lagfree and smooth super battery life
you are my hero
fedef12evo said:
It is simple, tested on my nexus 6, just go to system/bin and delete mpdecision, then install an app that controls kernel, like kernel adiutor, raise min freq of cpu to 883000 mhz, then set apply on boot, reboot phone and enjoy lagfree and smooth super battery life
Click to expand...
Click to collapse
Isn't enough to just turn off mpdecision in the kernel app?
this only works for stock roms? I can't find any mpdecision file on /system/bin
Sent from my Nexus 6 using Tapatalk
blanco2701 said:
Isn't enough to just turn off mpdecision in the kernel app?
Click to expand...
Click to collapse
if it turn off the 3 sec boost of mpdecision yes
sgloki77 said:
this only works for stock roms? I can't find any mpdecision file on /system/bin
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
works on all roms for nexus 6, some file managers cant see mpdecision in system/bin, try it in recovery using twrp
fedef12evo said:
raise min freq of cpu to 883000 mhz
Click to expand...
Click to collapse
Can you tell me if it's the minimum CPU frequency in the CPU tab or in the CPU governor configuration?
blanco2701 said:
Isn't enough to just turn off mpdecision in the kernel app?
Click to expand...
Click to collapse
Disabling in a kernel app will accomplish the same thing. The reason you are seeing a change in battery life is because of the 3 second input boost of MPD. Most of the custom kernels have a generic touch boost driver that is set to 1 second or less to take the place of the mpd boost and increase battery because of the decreased boost time.
MPD works great for some people and not for others. It is greatly dependent on your usage habits. For my typical usage, with mpd on, I average 6-7 hours of screen on time. If you are a gamer, where you are constantly touching the screen, mpd will adversely affect your battery life because of the constant boost.
As a kernel developer, I definitely would not recommend deleting the mpd binary. I would suggest trying a couple of different kernels and/or configurations to accomplish the same results.
lol.. seriously? i guess thats one reason that ive disabled mpdecision for the last 3+ years on whichever nexus i was on, but not the main reason
How can I turn mpd off on ex kernel manager
you don't need a kernel app to disable it BTW. all kernel apps do is provide a ui for you to use. it can be done via a terminal emulator app.. type,
su(press enter)
stop mpdecision(press enter)
and that's it.
I'm using kernel auditor and in the CPU hotplug section the first listing is mp decision. Is that what needs to be disabled?
OK, silly question.. do you know what mpdecision does? do you know what disabling mpdecision does?
simms22 said:
OK, silly question.. do you know what mpdecision does? do you know what disabling mpdecision does?
Click to expand...
Click to collapse
@simms22 good point here. This is good for everyone to know. If you disable mpd without a replacement, you risk all cores not coming back online after deep sleep. Mpd doesn't actually control hotplugging, it controls input boost and onlining of cores.
Sent from my Nexus 6 using Tapatalk
and that's exactly why I disable mpdecision, so I can have all 4 cores active at all times.
buckmarble said:
@simms22 good point here. This is good for everyone to know. If you disable mpd without a replacement, you risk all cores not coming back online after deep sleep. Mpd doesn't actually control hotplugging, it controls input boost and onlining of cores.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
When you say without a replacement what are you referring to? Trying to learn here..
MrMiami81 said:
When you say without a replacement what are you referring to? Trying to learn here..
Click to expand...
Click to collapse
A replacement such as Zen, Mako, Blu_Plug, etc.
Also, (just an FIY) Zen isn't really a hotplug (it keeps all four cores active at all times, unlike Mako, Blu_Plug, etc). It's still lumped in there for some reason.
I highly recommend disabling MPDecision. You know what MPDecision stands for, right? MakePoor Decisions
Face_Plant said:
A replacement such as Zen, Mako, Blu_Plug, etc.
Also, (just an FIY) Zen isn't really a hotplug (it keeps all four cores active at all times, unlike Mako, Blu_Plug, etc). It's still lumped in there for some reason.
I highly recommend disabling MPDecision. You know what MPDecision stands for, right? MakePoor Decisions
Click to expand...
Click to collapse
I'm running elemental x now and I can't find mp decision on kernel auditor. Do you know if it is included with this kernel? If so how would I disable it?
MrMiami81 said:
I'm running elemental x now and I can't find mp decision on kernel auditor. Do you know if it is included with this kernel? If so how would I disable it?
Click to expand...
Click to collapse
i believe its already disabled in elementalx kernel. anyways, you can always use a terminal emulator app, then type..
su(press enter)
stop mpdecision(press enter)
thats all. all kernel apps do is give you a ui to whats already available.
MrMiami81 said:
I'm running elemental x now and I can't find mp decision on kernel auditor. Do you know if it is included with this kernel? If so how would I disable it?
Click to expand...
Click to collapse
Some kernels come with it already removed. Check the features section of the original post in the Elemental X thread or try searching the thread.
I can say from experience that Kernel Auditor doesn't give you access to all of the adjustments in Elemental X. Some features are only accessible through the official Elemental X app, so it might be there, but you can't use Kernel Auditor to adjust it.
Face_Plant said:
Some kernels come with it already removed. Check the features section of the original post in the Elemental X thread or try searching the thread.
I can say from experience that Kernel Auditor doesn't give you access to all of the adjustments in Elemental X. Some features are only accessible through the official Elemental X app, so it might be there, but you can't use Kernel Auditor to adjust it.
Click to expand...
Click to collapse
I just downloaded the elemental x app. I'm gonna go over to the thread now. I appreciate your help
Related
So I'm kind of new to messing around with tablets but learning a few things. On my Nexus 7 I decided to put Cyanogenmod 10 on it so I could customize a few things. I then decided I wanted to overclock the max CPU frequency past 1300 MHz so I installed Trinity 7 kernel. Now I'm able to run it at 1700 MHz which runs a few apps much faster but after exiting out of the apps and going back to check on the max CPU frequency and it's set back down to 1300 MHz.
Does anyone have an idea what could be causing this? So far there's only one app I'm overclocking for so it's not a big issue but it would still be nice to figure out the issue.
Thanks
I down loaded too. I just changed the governer to performance and it stays on 1600 etc on set cpu
EsX GingaNinja said:
So I'm kind of new to messing around with tablets but learning a few things. On my Nexus 7 I decided to put Cyanogenmod 10 on it so I could customize a few things. I then decided I wanted to overclock the max CPU frequency past 1300 MHz so I installed Trinity 7 kernel. Now I'm able to run it at 1700 MHz which runs a few apps much faster but after exiting out of the apps and going back to check on the max CPU frequency and it's set back down to 1300 MHz.
Does anyone have an idea what could be causing this? So far there's only one app I'm overclocking for so it's not a big issue but it would still be nice to figure out the issue.
Thanks
Click to expand...
Click to collapse
There might be an option for "set at boot." Try that.
mccolvinj said:
I down loaded too. I just changed the governer to performance and it stays on 1600 etc on set cpu
Click to expand...
Click to collapse
That's not the solution. The performance governor keeps the cpu speed at max frequency at all times (even when screen is off). That will eat up your battery quick.
v9s said:
There might be an option for "set at boot." Try that.
Click to expand...
Click to collapse
Thanks that seemed to have fixed it though I figured out you have to turn that on THEN pick the max CPU frequency. Doing it the other way around won't change anything, I think that's what I tried before.
Also mccolvinj I'd personally leave it on interactive so it will just use the max CPU when needed or at least that's what I got out of the descriptions of governors I looked up.
EDIT: Nevermind...that only temporarily fixed it, it went back to 1300 after a bit. Maybe I installed Trinity 7 wrong?
Does trinity have superuser permissions?
Sent from my Nexus 7 using xda app-developers app
winged mantis said:
Does trinity have superuser permissions?
Click to expand...
Click to collapse
I think so since it's rooted, is there a way I can check or give it permissions?
you need the powerHAL "fix". your rom should include it, but i guess it doesnt. search the n7 forums for a flashable. or, the trinity kernel toolbox app includes the "fix" just in case your rom doesnt.
EsX GingaNinja said:
I think so since it's rooted, is there a way I can check or give it permissions?
Click to expand...
Click to collapse
Check in the superuser app
Sent from my Rezound using xda app-developers app
kernels arent rooted, your roms are. you can flash a custom kernel on a rom without root. the only difference is that you wouldnt be able to control the cpu with ant cpu control apps, the apps need root.
ive posted the solution already. either find the flashable powerHAL fix or use the trinity kernel toolbox to control the kernel. tkt includes the powerHAL fix.
Hi,
This thread is for discussing various governors/underclock settings on stock kernel for root users.
It looks like there are 4 governors on the stock kernel:
-interactive (default)
-ondemand
-userspace
-performance
Underclocking also works.
Because we do not have init.d support yet, I don't believe it's possible to set your desired clockspeeds/governor automatically on boot. But the settings can be accessed with pretty much any app like SetCPU, Voltage Control, System Tuner, etc. I use Voltage Control app.
I found the lowest I can underclock it without issues was 1134Mhz. Any lower and the active notifications would freeze sometimes. It seems with ondemand and 1134Mhz underclock it feels as snappy as the default config (1.7Ghz - interactive) but seems to use less battery and in some cases feels snappier due to more aggressive governor.
Post your findings/settings.
Init.d support might also be available as theres a app that gives init.d support try pimp my ROM from the play store, has the app bakes in and will verify if init.d support is working
Here's that app http://www.androidfilehost.com/?fid=9390248398092764054
Sent from my XT1058 using XDA Premium 4 mobile app
Has anyone tried turning on soc c2 and c3 and seeing what the results was? I use fuax clock for my app. I'm currently running on demand gov 1.134 GHz and GPU set to 320 with on demand and emmc entropy contribution set to off. I'm on an att x
sent from my rooted at&t moto x
krypticos said:
Has anyone tried turning on soc c2 and c3 and seeing what the results was? I use fuax clock for my app. I'm currently running on demand gov 1.134 GHz and GPU set to 320 with on demand and emmc entropy contribution set to off. I'm on an att x
sent from my rooted at&t moto x
Click to expand...
Click to collapse
hey! what kind of battery life are you getting with those settings?
I know the phone already gets awesome battery life, but
i like tinkering with settings haha
So far its been a little better I mean maybe 20% better. I'm normally at 35-40% battery at this time of day but with these settings I'm currently at 60% with the same amount of usage.
sent from my rooted at&t moto x
krypticos said:
So far its been a little better I mean maybe 20% better. I'm normally at 35-40% battery at this time of day but with these settings I'm currently at 60% with the same amount of usage.
sent from my rooted at&t moto x
Click to expand...
Click to collapse
hmm i'll have to give it a shot.
thanks for the info!
flashallthetime said:
Init.d support might also be available as theres a app that gives init.d support try pimp my ROM from the play store, has the app bakes in and will verify if init.d support is working
Here's that app http://www.androidfilehost.com/?fid=9390248398092764054
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.androguide.universal.init.d
any updates on this?
going to try this. froze plenty of unused apps, governor is still interactive, i/o is still cfq. clocked at 1.134. Advanced settings stock. applied init.d tweaks (fly on). will be back with results!!
I was wondering if it would be possible to utilize all four cores in the snap dragon 800 all of the time. I know that multi core processors only utilize what they need, and each core will only process one thing at a time. Without getting into Amdahl's Law, and getting super complex. It could be impossible, because you would almost have to break the law or something.
I just want to hear your guy's thoughts on this.
I suppose this could have gone into a different section as it is not directly related to the G2 itself, but oh well.
Sent from my LG-D800 using xda app-developers app
livelysins96 said:
I was wondering if it would be possible to utilize all four cores in the snap dragon 800 all of the time. I know that multi core processors only utilize what they need, and each core will only process one thing at a time. Without getting into Amdahl's Law, and getting super complex. It could be impossible, because you would almost have to break the law or something.
I just want to hear your guy's thoughts on this.
I suppose this could have gone into a different section as it is not directly related to the G2 itself, but oh well.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
sure, its possible. youll need s custom kernel that exposes the files for hotplugging. then you neex to set 4 cores as minimum on. thats how im using my nexus 5, no hotplugging/4 cores always on. in theory, its better for battery life as well, since the cpu doesnt waste time turning cores on and off constantly while hotplugging.
Where would I get that custom kernel for a d800?
Sent from my LG-D800 using xda app-developers app
livelysins96 said:
Where would I get that custom kernel for a d800?
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
now that i cant help with. check out the development sections to see if there are any available. but you need a total of 10 posts to see those sections, and youre almost there!
I think If you are rooted you can try to turn off mpdecision,use trickster mod app.
gm007 said:
I think If you are rooted you can try to turn off mpdecision,use trickster mod app.
Click to expand...
Click to collapse
disabling mpdecision doesnt disable hotplugging
simms22 said:
disabling mpdecision doesnt disable hotplugging
Click to expand...
Click to collapse
What i know that disabling mpdecision will turn all cores on.
gm007 said:
What i know that disabling mpdecision will turn all cores on.
Click to expand...
Click to collapse
wrong again. mpdecision keeps the cpu away from 300mhz, closer to 1100mhz(i dont know what it has been set to for the g2). this provides a boost when starting apps. custom kernels generally disable mpdecision.
simms22 said:
wrong again. mpdecision keeps the cpu away from 300mhz, closer to 1100mhz(i dont know what it has been set to for the g2). this provides a boost when starting apps. custom kernels generally disable mpdecision.
Click to expand...
Click to collapse
1036mhz for G2
U can disable MPdecision in system/bin, just rename the files with a .bak
After disabling 2 cores still seem to be offline. Idk.
Sent from my LG-D800 using xda app-developers app
livelysins96 said:
After disabling 2 cores still seem to be offline. Idk.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
right, you disabled the cores, you didnt disable hotplugging. but, you are a dual core for the time being
you would need to set 4 cores as minimum used, and 4 cores as a maximum. this, for all intensive purpose, will set 4 cores as a minimum being used, and make hotplugging not available.
How do I do that within trickster?
Sent from my LG-D800 using xda app-developers app
Here are my current settings I believe I figured it out?
Sent from my LG-D800 using xda app-developers app
Hi,
Disabling MpDecision in Trickster Mod makes the four cores always online, I've just tested (and I continue to test)... Compared to MpDecision ON, with two cores online mainly then one core then three cores online (according to what you are doing obviously)...
So I confirm that with MpDecision OFF, all cores are always online whatever the load of the CPU (since 10 minutes with screen ON/OFF, browsing, settings, etc...).
EDIT: with g.lewarne kernel, but he kept MpDecison stuff like stock, so... But I remember tested with the stock kernel and it was the same thing, maybe something related to LG kernel especially?
That's what i know,but simms has more knowledge than me.
viking37 said:
Hi,
Disabling MpDecision in Trickster Mod makes the four cores always online, I've just tested (and I continue to test)... Compared to MpDecision ON, with two cores online mainly then one core then three cores online (according to what you are doing obviously)...
So I confirm that with MpDecision OFF, all cores are always online whatever the load of the CPU (since 10 minutes with screen ON/OFF, browsing, settings, etc...).
EDIT: with g.lewarne kernel, but he kept MpDecison stuff like stock, so... But I remember tested with the stock kernel and it was the same thing, maybe something related to LG kernel especially?
Click to expand...
Click to collapse
gm007 said:
That's what i know,but simms has more knowledge than me.
Click to expand...
Click to collapse
nobody is perfect, i make mistakes as well :angel:
i dont use trickster, nor have a g2. ive always disabled mpdecision with my nexus 4 and nexus 5 by script, and that never ever disabled hotplugging. but, then again, g2 kernel code could be different
btw, on the nexus, disabling mpdecision is easy with the terminal emulator..
su(press enter)
stop mpdecision(press enter)
simms22 said:
nobody is perfect, i make mistakes as well :angel:
i dont use trickster, nor have a g2
Click to expand...
Click to collapse
I never said you're wrong, just stated that with the G2 it works to have all cores online all the time disabling MpDecision do the trick
I remember read that g.lewarne and whootever (2 kernel devs for the G2) have said that LG have some weird things about the kernel, maybe it's that...
LG messed up with some stuff in their kernel according to their sources, but maybe nothing directly related to MpDecision stuff..., ow well I don't know. But for sure I will run with MpDecison OFF to see if there is some good/weird behaviors (performance/battery life). I run with all cores online all the time on my N5 without any issues about battery life and great performance, maybe with the G2 it could be great too...
viking37 said:
I never said you're wrong, jsut stated that with the G2 it works to have all cores online all the time disabled MpDecision do the trick
I remember read that g.lewarne and whootever (2 kernel devs for the G2) have said that LG have some weird things about the kernel, maybe it's that...
LG messed up with some stuff in their kernel according to their sources, but maybe nothing directly related to MpDecision stuff...
Click to expand...
Click to collapse
do me an experiment. download and install perfmon from the play store, open it, press cpu. then do whatever you do(but watch the perfmon floating window. tell me if you see cores disable and enable with your use. make sure mpdecision is disabled. now im just curious. btw, perfmon is a cool app that enables a floating window so you can watch it while doing your normal stuff.
simms22 said:
do me an experiment. download and install perfmon from the play store, open it, press cpu. then do whatever you do(but watch the perfmon floating window. tell me if you see cores disable and enable with your use. make sure mpdecision is disabled. now im just curious. btw, perfmon is a cool app that enables a floating window so you can watch it while doing your normal stuff.
Click to expand...
Click to collapse
Re,
Done, just let me uplaod the 147 Mo video (for 49 secondes :laugh on Youtube (tested with Dropbox but even more time)..., in about 40 minutes...
viking37 said:
Re,
Done, just let me uplaod the 147 Mo video (for 49 secondes :laugh on Youtube (tested with Dropbox but even more time)..., in about 40 minutes...
Click to expand...
Click to collapse
thanks! and waiting..
I see a lot of people are quick to flash AK, Franco, Tyr, etc before they even give the kernel that comes with the ROM a try.
From my personal experience, the kernel that comes with a ROM is always faster & snappier than aftermarket kernels (no overclocking).
Also, correct me if I'm wrong, but the kernel that comes with the ROM is optimized to perform best with the ROM. Optimization is the main reason why Android is one step behind of iPhones. I don't know about you guys, but I want my phone to be fully optimized which is why I stick with the stock kernel most of the time.
I guess I'm also one of these people who are quick to flash a aftermarket kernel.
But I think the aftermarket ones are the more optimized ones.
Anyway I never had problems with the stock kernels.
I love the extra work devs like Franco and AK do. Sometimes I get some reboots with Franco but overall its a good experience. I just have some Franco loyalty from when I used his kernel on nexus 4 lol best kernel ive ever used. Not sure if I'd say the same about his one plus kernel but if there's any issues I'd blame cm not him
Klobal said:
I guess I'm also one of these people who are quick to flash a aftermarket kernel.
But I think the aftermarket ones are the more optimized ones.
Anyway I never had problems with the stock kernels.
Click to expand...
Click to collapse
I used to be the same way on my older android devices.
It seems like now flashing a kernel is no longer need to improve performance (sorta)
The hardware on the oneplus one is beast & android has come a long way in terms of software.
Because I love the sound control in AK Kernel
jousa11 said:
Because I love the sound control in AK Kernel
Click to expand...
Click to collapse
Better than Viper or DSP?
OmegaBlaze said:
Better than Viper or DSP?
Click to expand...
Click to collapse
I use viper as the audio processor AK's kernel just gives good audio gain without any distortion
OmegaBlaze said:
I used to be the same way on my older android devices.
It seems like now flashing a kernel is no longer need to improve performance (sorta)
The hardware on the oneplus one is beast & android has come a long way in terms of software.
Click to expand...
Click to collapse
I believe the same. I get most battery savings from deleting bloat off the phone.
NJGSII said:
I believe the same. I get most battery savings from deleting bloat off the phone.
Click to expand...
Click to collapse
I do the exact same thing. I try and delete all of the unnecessary google play stuff as well as apps I don't use often. And use greenify as well.
jousa11 said:
I use viper as the audio processor AK's kernel just gives good audio gain without any distortion
Click to expand...
Click to collapse
I definitely have to try that out. I usually always skip pass it lol..
I use franco kernel because I get better battery with his kernel (compared to stock), and it's always up-to-date with most of the patches, while with stock you'll have to wait until the next OTA to get some patches.
NJGSII said:
I believe the same. I get most battery savings from deleting bloat off the phone.
Click to expand...
Click to collapse
Can you please name bloat stuff which still comes with Cyanogenmod what should be deleted? Would be helpful for me to get my phone as clean as possible/neccessary.
m4soN said:
Can you please name bloat stuff which still comes with Cyanogenmod what should be deleted? Would be helpful for me to get my phone as clean as possible/neccessary.
Click to expand...
Click to collapse
Meant that with other phones I have
So, there is no stuff which still comes with systems like cyanogenmod which i can delete without getting any trouble? If yes, how do i know which stuff this can be?
Purchased Franco Kernel Updater and if I didn't use a custom kernel (or Franco Kernel) then I spent money on something I'm no longer using.
Also because I'm not a fan of mpdecision.
zephiK said:
Purchased Franco Kernel Updater and if I didn't use a custom kernel (or Franco Kernel) then I spent money on something I'm no longer using.
Also because I'm not a fan of mpdecision.
Click to expand...
Click to collapse
Same here switching between AK and Franco.
Both are a good choice.
But as mentioned before, the hardware of our phone is :good: so no need to flash a aftermarket kernel to gain more performance.
zephiK said:
Purchased Franco Kernel Updater and if I didn't use a custom kernel (or Franco Kernel) then I spent money on something I'm no longer using.
Also because I'm not a fan of mpdecision.
Click to expand...
Click to collapse
Why not? Intelliplug?
OmegaBlaze said:
Why not? Intelliplug?
Click to expand...
Click to collapse
Anything other than mpdecision, I personally prefer Franco's hotplug algorithm which is his own implementation of powering on/off cores.
Mpdecision is Qualcomm's implementation of powering on/off cores.
I personally am not a fan of Intelliplug,
3 - Don't even bring intelliplug on this. With all due respect to faux, that driver is a butchered solution to control the cores. The code is a mess and, in my opinion, just doesn't make any sense. I've worked on my Hotplug driver for years and it works as simple as need be, with appropriate userspace tunables for users to tinker with.
http://forum.xda-developers.com/showpost.php?p=55667033&postcount=3981
Click to expand...
Click to collapse
http://www.reddit.com/r/nexus4/related/158t1i/custom_kernels_a_guide_on_what_you_need_to_know/ has a great reading on mpdecision and why it is not good in their opinion.
--mpdecision--
All Qualcomm based phones have Qualcomm prorprietary userspace binary called "mpdecision" aka m(ake)p(oor)decision. Instead of letting the kernel itself to decide what frequencies and how many cores to run, this "mpdecsion" binary polls the kernel run queue statistics and decides for the whole system the "optimal" frequency and the "optimal" number of cores to use. The concept is fine, except the decision making is done in userspace and it's 100% closed source so there's no way to tweak it and there's a latency (because all userspace binaries needs to "poll" the kernel for the latest information which is slightly delayed). - faux123
ELI5: mpdecision is a proprietary Qualcomm daemon that makes calls to the SoC (the entire chip your phone uses) to manage the cores. The OS (PowerHAL) makes a request to mpdecision and then mpdecision makes a request to the first two cores to ramp them up. - _motley
Click to expand...
Click to collapse
I like to mess with my phone. Simply because I need a kernel fully optimised kernel for the device. Not to say that the developers aren't doing a good job, but in my case, a user sometimes knows better than the creator themselves.
Unless the custom kernels do not satisfy me, I'll revert back to stock.
m4soN said:
So, there is no stuff which still comes with systems like cyanogenmod which i can delete without getting any trouble? If yes, how do i know which stuff this can be?
Click to expand...
Click to collapse
This phone is fairly clean out of the box. About the only stuff worth freezing or deleting would be some of the google play apps if you don't use them. For example Google play books, news stand, or games.
What can say about it? The battery is not the problem, the problem is that a side of the camera it comes too really hot. What can I do? Do you have the same issue?
champagne66601 said:
What can say about it? The battery is not the problem, the problem is that a side of the camera it comes too really hot. What can I do? Do you have the same issue?
Click to expand...
Click to collapse
Are you rooted?
negusp said:
Are you rooted?
Click to expand...
Click to collapse
Yes, I'm on stock 7.0 rooted.
champagne66601 said:
Yes, I'm on stock 7.0 rooted.
Click to expand...
Click to collapse
Ok, there's a couple of things you can do. If you're using the ElementalX kernel, I recommend you purchase the app EX Kernel manager. If not, just use Kernel Adiutor.
In Kernel Adiutor, if you're not using ElementalX, go to CPU or Hotplugging. There will be a setting called quad core/dual core mode. Enable quad core mode, your phone shouldn't heat very much.
If you are using ElementalX, in EX Kernel manager, set the minimum "big" cpus to 1. If using Kernel Adiutor, simply toggle of 3 of the "big" cores.