Related
Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!
Wifi sync is your friend
lamajstro said:
Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!
Click to expand...
Click to collapse
This is a well documented problem. I think it's to do with the way that android sees the SD card with booting from it but don't quote me on that. As far as I know, the best ways round it are:
1. Use dropbox. Free 2gb account and can be very useful.
2. FTP. This is my personal favourite. SwiFTP is a free FTP server for android and there are many free ftp clients for PC/Mac/Linux available. I use FileZilla (opensource ftp client).
3. I believe that if you unmount your SD card before copying files over, then remount however I don't find it particularly successful.
There are other ways like shared folders, email files etc but the top 2 above are the best for me. I use dropbox for small files and one-offs or if I'm copying a lot of stuff and don't want to reboot to winmo, then FTP.
It's also worth noting that if you are a windows user then winamp can sync music over wifi providing you install the winamp android client. However both winamp for windows and android are free.
Hope this helps..
enjoy
Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...
I use MDJ Froyo HD 4.6, and there are practically no problems when using mass storage option... After unplugging the files are on the SD card... Only sometimes have to reboot, but not very often...
Why so complicated? Use "Multi Mount SD Card" (it´s free) to connect to PC and you will see new files without rebooting.
lamajstro said:
Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...
Click to expand...
Click to collapse
If you're now saying that applications are unable to create files on the SD then there is something wrong with your card. I'd recommend copying everything off it and reformatting it (use disk management to format it, and use the largest cluster size available).
Some builds suffer from this problem and some don't.
Im using HD2ONE 0.3.6 and it's working fine. File explorer detects the new files after transferring via USB Cable
I love this build paired up with the CM6.1.1 Gingerbread Theme
kashifsiddique said:
Some builds suffer from this problem and some don't.
Click to expand...
Click to collapse
I've heard many people complain about not being able to see files after copying them across, but I've never heard anyone say that an app could not make a file on the sd card.
I am having the same exact problem. I was transferring files from this PC to my phone and everything was going fine (it refreshes right away after disconnect) then suddenly, my SD Card got corrupted and I was forced to reformat. I used the same ROM (Darkstone's SUPERAM FROYO) and after that, it won't sync anymore. I even tried removing it and using the HD2ONE (mentioned above) ROM and it was the same. I went home, copied everything from my SD backup from the other PC and same symptoms.
I thought I was missing a sync app or something but no. I looked into each of the folders I copied and most of them are blank.
I hope someone can save us!
I find it easiest and safest to just use ES Explorer to access the network shares and copy files wirelessly. The way our data.img is mounted, giving the pc full access to the sdcard is just not a good move. There was good reason when you connected to windows' sync software it disables your phone from accessing the card.
Even though the hd2one build seems to handle it correctly I almost never do it anymore unless it's for big files. It saves the wear and tear on the usb port anyway.
I had that "problem" too, but for me it was easy to solve. Here is the whole procedure:
So, i want some files to put on my sdcard, i plug in the usb cable and select the option "use as a storage", dont check the "use allways" or "dont ask again" (or whatever this is called on your machine). Now the computer "see" the phone and i put my files on it. In this moment i cant browse the sdcard on my hd2, because its reserved for windows now, (thats why currentwidget cant write onto it, same if you have a wallpaper in some "wallpaper" folder on sd).
Now, when i am done, usually i unplug the usb cable for some seconds and then i plug it in again and choose the option "charge only" and the sdcard gets mounted in android like it should and all my new imported files are visible.
Its the same on WinMo, if you choose there the "HDD" option, you cant browse the sdcard on the mobile. Only if you choose "use active sync"(slower) you are able to browse the sdcard.
cheers
ps: the quickest way for me now is to use wifi and shared folders
I had it at one time but because I'm an Android newbie, I have no idea where to look.
Using Astro or ES.
rorytmeadows said:
I had it at one time but because I'm an Android newbie, I have no idea where to look.
Using Astro or ES.
Click to expand...
Click to collapse
It's ok, we all start somewhere right?
Load up astro hit home then up and your usb storage device is whatever is in usb_storage. Remember to give it a few secs to detect it and prepare the drive.
Your SD card (internal) is sdcard and your microsd is external_sd.
GL.
Hope this helps.
Neoprimal said:
It's ok, we all start somewhere right?
Load up astro hit home then up and your usb storage device is whatever is in usb_storage. Remember to give it a few secs to detect it and prepare the drive.
Your SD card (internal) is sdcard and your microsd is external_sd.
GL.
Hope this helps.
Click to expand...
Click to collapse
Excellent! Thanks.
Is it possible to access the micro SD card through a computer? When exploring the acer drive after plugging it in you can see all the stuff on the internal memory but can't get to the external_sdcard folder.
at the moment i dont think this is possible but give it a few days and it might be a possibility.
tuffghost said:
Is it possible to access the micro SD card through a computer? When exploring the acer drive after plugging it in you can see all the stuff on the internal memory but can't get to the external_sdcard folder.
Click to expand...
Click to collapse
You can purchase (I think it was a whole $1.50) an app called WiFi File Explorer. It sets your tablet with its own IP address from whatever source you are using for WiFi. Then you access your SD Card by entering in the IP address line in your browser. The app will give you the exact address line to enter into your browser.
Its like a virtual FTS server actually. Works like a charm. If you are worried about security, you can require a password.
Accessing external sd and usb drives
It is possible to access the SD and USB drives using a file manager such as Astro or Estrongs. The drives can be found in the main directory under subdirectory /mnt.
Hope this helps. I had the same problem at first.
Tam the Bam
tuffghost said:
Is it possible to access the micro SD card through a computer? When exploring the acer drive after plugging it in you can see all the stuff on the internal memory but can't get to the external_sdcard folder.
Click to expand...
Click to collapse
According to Acer, that isn't possible right now. Not that I'm inclined to believe them, but the manual is pretty thorough and I decided to go through every page and it clearly states "Transferring files from a microSD card to your PC.
Remove the card from the tablet and use a card reader or USB adapter to access the card as an external storage device."
I'm REALLY hoping they address this in an update. I thought it was a Honeycomb limitation due to the Xoom but Asus has addressed it by looping it as a folder in the internal storage so I mean, Acer and Xoom should be able to do that as well. Unless there are unforeseen problems with doing that? /shrug.
USB and a camera
Thanks for starting this thread! I'm also a newb and I have Astro and ES installed (now).
I am trying to read images from my camera (Nikon D3). When I attach the USB and turn on the camera the A500 says scanning for media. But none shows up in the photo browser (I'm sure I need a better viewer and suggestions are welcome!). When using ES or Astro and navigating to the usb_storage directory it shows as empty.
For background, the D3 holds 2 CF cards with the 2nd typically used as overflow and both are 8GB. Each card normally just has a DCIM directory with photos in one or more directories below that.
Once I connected up the A500, on one of the cards 2 additional directories were created (the one without any images currently) called .android_secure and LOST.DIR. I can't see any of these directories on the A500 or any of the images (all .jpg). I plugged into my laptop for this info.
I am trying not to have to carry my laptop anymore so any suggestions, ideas or research resources would be appreciated.
I've run into a HUGE issue. I wonder if anyone else has experienced this.
The files on my USB flash drives begins to get erased/deleted if it is still connected to the tablet when the device is activated from hibernation mode. I don't know if the file explorer apps are causing this bug. I've used Linda File Manager and Astro and 3 different USB drives to test this. I've even restored my tablet to factory settings.
Hello,
I have also problems navigating the usb drive.As mentioned above I found the dir but it shows (Directory empty).Im using a 8gb transcend flash drive.On 128mb flash drive there is no problem viewing and accesing the files.Any other have the same problem or solution?
I change the file system from NTFS to FAT32 and it works now(such a stupid user Ive become)
I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).
Are you connecting the nook via USB or putting the SD card in your computer directly?
Sent from my NookColor using Tapatalk
The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.
You need to connect through the nook
Sent from my LG Optimus V using Tapatalk
Littlewhat said:
The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.
Click to expand...
Click to collapse
This is because the partition the computer sees is the boot partition... to access it in the nook... either in terminal or adb shell:
1. mkdir /sdcard/boot
2. mount /dev/block/mmcblk1p1 /sdcard/boot/
the items on the boot partition of the SD (including the folders and apks you put there) will be visible as /sdcard/boot
Pretty sure you'd have found it in the VG SASD thread and a few others... since I have posted this several times.
Thanks for the response. I'm not real familiar with ADB so I tried it with terminal and was able to create a directory but mounting gave me a 'permission denied' message.
(Sorry if this is old info, I've spent the morning combing the SASD thread and haven't found it yet, just too much info, thanks for taking the time to help some of us who are slower learners!)
Edit: learning slowly, used su to get into superuser (#) and made directory, but when I try to mount it says not found.
Littlewhat said:
I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).
Click to expand...
Click to collapse
If you asked this question 2 weeks ago, I might able to give you the exact answer but since I wiped out the uSD CM7, I can't remember correctly what would happen.
However, based on my experience (+/- my memory loss), what you describe is all correct and that's what it is. Odd? Maybe, but don't panic.
Let's go slowly
when I try to create folders on that drive from my PC
Click to expand...
Click to collapse
you meant you created a folder in the "boot" partition on the uSD card?
a. if so, it's not recommended. Using the left over FAT32 partition instead
b. if so, try to use Root Folder app (it's a paid app) to access root folder (boot partition) directly on the NOOK. If you see the folder you created earlier, move it to the eMMC storage.
c. if not, pls tell us more
Yes, the SD card was accessed on my PC thru a USB adapter and a folder called 'APKs' was created in the boot sector. (I have also tried just adding the files into one of the other folders, but anything I add is invisible to the Nook).
So if I need to create a folder in other than the boot sector, I would need to use something like Easeus Partition Master to make that sector active and then create the folder and add appropriate files? (When I rooted my Nook directly to emmc it sure seemed a lot easier to access folders created by my PC.)
(Thanks again for all your help.)
That's much clearer, m8
Now, I think it's easier to get straighten.
1. From PC, using SD slot or usb-sd adapter, move (remove) the "APKs" folder off your NC to your PC, save it there, then eject the uSD off PC.
2. Insert the uSD into the NC and turn it on, make sure it boots into CM7 properly.
3. Wait until it completely load. Now using usb cable to connect the NC and the PC.
4. Watch the notification status bar on the NC, tap on it then turn on usb mass storage.
5. PC should recognize the NC and ready for use.
6. Move your "APKs" folder from PC into your uSD (it would probably named as CM7SDCARD)
Update: on item 6, I prefer to move the folder to the eMMC storage. I'm not 110% sure if the NC see "it" (it means the left-over FAT32 partition on the uSD card) or not, but I do believe, 99% it will.
Deleted folder on SD card (from PC) and verified reboot ok.
Connected USB cable to PC then to Nook, no notification bar comes up, but battery icon shows charging as well as the lighted n on the cable.
Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Still no recognition from the PC that anything is connected.
Edit: I am using my rooted Nook to build this SD card for my daughter's new unrooted Nook and when I plug the rooted Nook into the PC I don't get any verification from the PC on it either. No change on the Nook either, just the charging light and icon indicator.
Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Click to expand...
Click to collapse
I don't have the NC with me now so I don't know what "both boxes" are and need to be checked or not.
The USB Settings from Nook Tweaks has a "USB Host Mode" (to enable host mode to connect peripherals) and an "External VBus" (to allow charging and hosting).
Both boxes were checked.
I've read that some of these issues can be caused by a faulty cable. If so, are there other alternatives to connecting thru the cable to open this up.
I have also tried the MiniTool partition program but I have not been successful in getting the active partition to 'stick' . (It immediately reverts back to the root being active after I apply the changes.)
You definitely have to UNCHECK the "USB Host Mode".
I'm not so sure with the "External VBus" status but suggest leave it by default.
With nothing checked in the Nook Tweaks section, USB cable connected to the Nook and then the PC, there is no recognition or acknowledgment that the Nook is there from the PC. (This is true whether I use my rooted version or try after booting to the sd card.)
If it is a cable problem, I will need to replace that, but aren't there other ways to make the sd card usable?
I've tried making the 4th partition action using Minitool and also Easeus but it didn't work. (Minitool just reverts back to boot partition active immediately after I apply the changes.)
Slow down, MiniTool and partitioning have nothing to do with this. Don't make more mess.
a. when plugging NC to PC, do you see any indication on the NC's status bar? like usb debugging?
b. when plugging NC to PC, do you see any indication on the PC (running Windows)? like removable drive?
There is no indication on the PC of any new connection.
The only indication on the Nook is the lighted n at the end of the cable and the recharging icon in the status bar.
Edit: the reason I was providing info on the MiniTools experience I was having is because my original question was how to access a folder (and files) created on my sd-bootable disk on my PC but the Nook can't see it. One way to accomplish this is to write the folder/apks directly to the Nook thru the USB cable. Other alternatives are to use windows to access it on my PC but I need to be able to access the 4th partition (if my reading of the various posts is correct). MiniTools and Easeus are two options that allow you to activate the 4th partition but it has not worked for my yet.
The USB cable connection problem appears to be there whether I boot to emmc or to sd.
Edit: I was able to find a non-nook cable (for my Blackberry) and using it my Nook recognizes when I connect to the PC and executes the USB Mass Storage Utility which allows me to turn USB storage on/off. Unfortunately the PC doesn't add any new logical drives in My Computer. The device manager shows 2 B&N Ereader Disk USB devices but with the yellow ! by them.
The 4th partition you mentioned about should be taken care during the installation, using verygreen's instructions, if you do correctly. There is ABSOLUTELY no need to mess around with MiniTool or the a-like.
Another question, have you turn on the USB Debugging feature? (I don't remember where, NC not with me now). If it not, check it box, try to plug in PC using usb cable again. I expect at least the usb debugging indicator will lit up.
I checked the debug feature (part of settings/applications/development/) and it was not checked. I checked it and now I get the robot icon (USB debugging conntected) and the USB icon to toggle storage on/off. Still nothing in My Computer and the drives shown in device manager are still yellow ! .
The device manager says "This device cannot start. (Code 10)"
I know it would be too early to say but I gonna to say anyway "congratulation".
When you see those icons on the NC status bar, it's 99% that it would work.
Now, back to the reality.
1. Connect usb cable between NC and PC running Windows
2. As you can see those icons, tap on the status bar to bring up then tap on "USB Mass Storage" (or something like "connect to computer for file/folder transfer, NOT the debugging). Read the warning then tap to enable USB connection
3. Now, pay attention on the PC, if it goes smoothly as expect, by now, you now can access both storages (eMMC and left-over of the uSD card) from PC. If so, move your "APKs" folder over.
I wish you luck
1- cable connected, icons on nook show up
2- tapping on status bar gives access to USB Mass Storage utility and option to turn on/off USB storage - with USB storage set to 'on' there is no recognition on the PC
Device manager shows two entries under disk drives for B&N Ebook Disk USB device but both are tagged with yellow ! (which a right click shows "This device cannot start. Code 10")
Is there something I need to do to download a usable driver for this?
(OBTW thank you for your help and patience)
Edit: within device manager I uninstalled the two drives (while the nook was still connected and USB active) and then had it search for new hardware. This time it loaded the drivers and NO yellow ! . At that point the PC recognized the drives and I have been able to create a folder that is accessible by the Nook and the PC. Thank you for help in this.
I have also contacted B&N and have a replacement cable on the way (which seemed to be a large part of my problems). Thanks Votinh for sticking with me while I got this resolved.
Just thought i'd share this info if you don't know already. For those of you looking to transfer files from your Mac, download Android File Transfer and install that. Plug your phone in and enable camera mode (don't know why its camera mode) and you should be able to transfer files through Android File Transfer, external and internal SD Card. :laugh:
Android File Transfer: http://www.android.com/filetransfer/
Sent from my SGH-T999 using xda premium
There is a Kies version for MAC as well that will allow for music, files, photos, etc. to be loaded
Why would you need this? When you connect via usb you have 2 options in the drop down, MTP, basically installs the software to transfer files on windows, supposed to work on macs, but you can always switch it to the second option 'camera' which basically works on this option. I leave this the default, so it works with external hard drives, linux, and windows.
teh roxxorz said:
Why would you need this? When you connect via usb you have 2 options in the drop down, MTP, basically installs the software to transfer files on windows, supposed to work on macs, but you can always switch it to the second option 'camera' which basically works on this option. I leave this the default, so it works with external hard drives, linux, and windows.
Click to expand...
Click to collapse
Android File Transfer is required for Macs if not using kies.
Sent from my GT-I9300 using Tapatalk 2
stevesprivateaccount said:
There is a Kies version for MAC as well that will allow for music, files, photos, etc. to be loaded
Click to expand...
Click to collapse
Sure you can transfer music and whatever via kies but you can't transfer zip files which is one of my main concerns. Just think if Android File Transfer as USB Storage Mode.
Sent from my SGH-T999 using xda premium
teh roxxorz said:
Why would you need this? When you connect via usb you have 2 options in the drop down, MTP, basically installs the software to transfer files on windows, supposed to work on macs, but you can always switch it to the second option 'camera' which basically works on this option. I leave this the default, so it works with external hard drives, linux, and windows.
Click to expand...
Click to collapse
Yes it works on windows without installing anything but it doesn't work on Mac without Android File Transfer installed, hence the title.
I have usb debugging checked, i even downloaded that android file transfer utility for mac, i selected the media file transfer option under the android u.i ..and still nothing has worked, i even tried mounting the storage through twrp but nothing seems to be working. Please help i'm trying to flash roms but i won't be able to if i don't have usb debugging working to put the files on the internal storage. Anyone know how to solve this issue? :crying:
yoh65 said:
I have usb debugging checked, i even downloaded that android file transfer utility for mac, i selected the media file transfer option under the android u.i ..and still nothing has worked, i even tried mounting the storage through twrp but nothing seems to be working. Please help i'm trying to flash roms but i won't be able to if i don't have usb debugging working to put the files on the internal storage. Anyone know how to solve this issue? :crying:
Click to expand...
Click to collapse
Android File Transfer has never worked for me on Mac going back to several of my android devices as far back as the OG Epic/Epic 4G/S3. The only Android phones it ever worked with for me were oddly Nexus devices, Nexus S 4G and Galaxy Nexus (could have something to do with those phones not having external SD and the way the internal NAND is set up).
Anyway, i'd suggest you just use your memory card to move things back and forth or do what i do which is use FTP wireless between phone and Mac. I use Transmit on the Mac and ES File Explorer (file manager) and SwiFTP (FTP server) on the phone. Never have to plug and unplug USB or take out memory card. My Mac's I.P address is mapped to ES File Explorer and i just browse it and copy back and forth whatever i want OR i run SwiFTP on the phone and browse it from the Mac.
Of-course there are tons of other FTP apps out there you can look into that work just fine as well.
I do find it odd that even mounting via TWRP does not work for you. At least that works fine for me but who wants to turn off their phone anytime they want to transfer a file..
LordLugard said:
Android File Transfer has never worked for me on Mac going back to several of my android devices as far back as the OG Epic/Epic 4G/S3. The only Android phones it ever worked with for me were oddly Nexus devices, Nexus S 4G and Galaxy Nexus (could have something to do with those phones not having external SD and the way the internal NAND is set up).
Anyway, i'd suggest you just use your memory card to move things back and forth or do what i do which is use FTP wireless between phone and Mac. I use Transmit on the Mac and ES File Explorer (file manager) and SwiFTP (FTP server) on the phone. Never have to plug and unplug USB or take out memory card. My Mac's I.P address is mapped to ES File Explorer and i just browse it and copy back and forth whatever i want OR i run SwiFTP on the phone and browse it from the Mac.
Of-course there are tons of other FTP apps out there you can look into that work just fine as well.
I do find it odd that even mounting via TWRP does not work for you. At least that works fine for me but who wants to turn off their phone anytime they want to transfer a file..
Click to expand...
Click to collapse
you saved my life !!! <3 using all my thanks on you!