Database Users

[Q] What did autorec do to my phone?!?

Hi all,
Let me try to walk you through everything that I've done to try and get some help here.
I have an lg g2 sprint (lg-ls980)
1. When I got it I first upgraded to android 4.4.2
2. Then I rooted using stump root
3. I installed xposed and a few xposed modules....I then decided Id rather have a different rom, so
4. I used autorec (which to my understanding changed my kernel in order to workaround boot loader and install twrp? is that accurate?)
5. Booted to twrp, wiped data and installed cyanogenmod and gapps
After this I get stuck and can't boot past the lg logo, so I booted back to recovery and restored my backup. So I did the same and tried pacrom this time with the same results.
I then decided that if I'm going to be stuck with stock rom I at least want my knock on back, so I flashed the patched kernel and same thing- stuck at lg logo....
I know I downloaded the correct zip files and placed them on the root, and always wiped before flashing.
Then I went into download mode on the lg support tool to try to get back to factory, but it says my firmware and recovery is up to date. The odd thing is that the lg support tool shows my phone as ls740 rather than ls980... is this because of something that autorec changed? Do I need to download zip files for ls740 instead? So confused..
About phone in my g2s settings shows android version 4.4.2 and kernel version 3.4.0
Anyways, if anyone could help me to successfully get one of these roms to flash and get back to the kernel that supports the knock code I would really appreciate it.
Thanks in advance!

[Q] Please help mates, I got a problem with a kernel!

Hello everybody, I was wondering if you could help me with this problem.
I got an lg g2 D802, I was on the official kit kat rom with knock code, with Dorimanx kernel 7.1, everything was ok, Im using the right baseband from kit kat, but I changed the rom to Paranoid Android new version, doing a full wipe/ clean install. But the first hours of use I noticed that my phone was overheating, so I started to read bout that, and I realize that Dorimanx kernel wasn't for PA Roms, only for stock based, so I decided to change my kernel, I wasn't sure what kind of kernel I need, so I search a bit and a page says that PA Roms was AOSP based, then I downloaded Furnace Kernel 2.5.1, AOSP version, flashed it and when the phone reboots, it repeatedly say: com. android.phone process has stopped. So technically I wasn't able to do anything. I boot into recovery again and try to flash stock kernel for kit kat, and when the phone tries to boot, an lg logo appears and say: Security error. I reboot into recovery once again and try to re- flash Dorimanx kernel, because it was late night and I wanted to sleep, so I though, just need the phone to boot and tomorrow I will change the kernel to a correct one, but when the phone tries to boot, got stuck in lg logo and the led flashing, since that, I ve been trying to flash so many kernels, included furnace stock version and cm version, with no result, I tried too cloudyfa, auxilium, stock, PAEK and nothing seems to work.
I did my backup when I flashed PA, but cause first hours seemed to be ok , I deleted it for storage reasons, so now i cant restore any backup, and I know doing a full wipe /clean install again will solve this problem, but I don't want to lose all my files and photos and stuff from years ago, and I know that is possible to flash a kernel and boot with this rom because when I flash furnace AOSP the phone turn on and show my lock screen and desktop, but the com.android.phone has stopped problem appears and don't let me do anything.
So, I ask to you: What can I do to flash the right kernel and don't lose my stuff?
Thank you for your answers and sorry for my bad English.

@Delintg2 Why don't you just flash paranoid android again? Flashing the rom changes the kernel as well

Art Vanderlay said:
@Delintg2 Why don't you just flash paranoid android again? Flashing the rom changes the kernel as well
Click to expand...
Click to collapse
Ive tried too, with no result, stuck o lg logo, and now the adb sideload say sending package and when 100% nothing happens on the phone :S

Delintg2 said:
Ive tried too, with no result, stuck o lg logo, and now the adb sideload say sending package and when 100% nothing happens on the phone :S
Click to expand...
Click to collapse
You have to flash the sideload zip when that's done. If you still can't boot into your ROM then its back to stock town for you I'm afraid. We've all been there :highfive:

Art Vanderlay said:
You have to flash the sideload zip when that's done. If you still can't boot into your ROM then its back to stock town for you I'm afraid. We've all been there :highfive:
Click to expand...
Click to collapse
Ok backing to stock :S, ty anyway m8

Help me,, Cannot boot in to recovery

Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:

I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:

AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?

No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!

bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!

there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...

Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,

[Help Please] Somewhat bricked my LS980.

This is a copy+paste from a reply I wrote in the Q&A section of the CloudyG2 3.1 rom.
"Alright, so since yesterday, I have been trying to find out how to install this rom in the correct way. I asked in the original thread of the rom (before I knew there was a Q&A). I was on CloudyG2 2.2. I am using LS980 Spring Variant. My question was, do I need to TOT back to ZVE and update to ZVG and root and install CloudyG2 3.1 that way, or could I just stay on 2.2 and go into recovery, wipe data and everything, then flash the LP bootstack and install the rom and hotfix. One person replied, "Yes". I asked to what was he referring, tot or just wipe everything from 2.2 and flash it. Then somebody else said to tot. So today when I got home, I decided to tot to zve.
After I got to ZVE, I updated to ZVG, successfully. I rooted, AutoRec. All was well. Then I went into recovery, wiped data, system, cache, dalvik. Then I flashed CloudyG2 3.1, flashed dorimanx 2.9, then flashed the LS980 hotfix. I rebooted my phone and it stayed on the LG Logo for about 5 minutes without anything happening, no boot animation, so I assumed something went wrong. I reboot into recovery and wiped everything again and flashed the LP bootstack (I read somewhere in the oringal post that people were saying to do this.) after that, I flashed the 3.1 rom, then flashed dorimanx, then flashed the hotfix, then rebooted. Immediately after I rebooted, it flashed the LG logo then went straight to a black screen, like many others are getting. So I assumed it had to do with having the LP bootstack. I also read that needed to be on Kitkat modem. So the change I made this time was I rebooted into recovery, wiped all, then flashed the kitkat modem this time and not the bootstack, then flashed the 3.1, hotfix and rebooted. Same thign happened again, showed the LG logo for a second, then went to a black screen.
At this point, I am not sure what is going on. So I decided to try to tot to zve again. Only, when I go into download mode, I get security error. I am still able to go into recovery, however, that is all I can do. I know people keep saying read the OP, and I, like many others have read the OP and perhaps do not clearly understand it. And I have tried to ask around, but it seems people are getting bashed for not understanding the OP or how exactly to flash this rom.
Could one of you kind people please give detailed instructions on how to go about getting this rom to boot on the LS980 variant?
And could somebody help me with my specific issue, not being able to get into download mode now and not being able to boot up a rom. Like I said, I can still get into recovery and flash things. But all I have tried, I mentioned earlier in this post, none of it works, any suggestions?
So, I came across this thread, which seems to be a fix for my phone. (Unless someone here knows an easier way?) http://forum.xda-developers.com/show....php?t=2582142
"You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone. "
It says I must use the img files for the rom I have installed before getting the problem. Could somebody elaborate please? I had stock ZVG, then flashed cloudyg2 3.1, that is when my phone messed up. Then I tried ultrapop (stock ls980 LP rom)."

Huawei p8 software problem

Hello.
Couple months ago i started playing around with my p8 i unlocked bootloader flashed twrp make backup of rom (yes without a stock recovery) and i flash cm13.
And here is my problem i want to go back to stock i can easyli flash my stock rom from twrp from backup but then when i want to flash anything else for example another rom with lower android version it's gettong bootloop i even make full flash (every partiton from same update.app) but nothing still bootloop.
And here is strange part in custom rom i flashed supersu it worked great so i wanted it on my stock backuped rom what i'm able to flash and flashing supersu gives me nothing it booting normali not two or three times and after boot it doesn't see root.
Can you tell me where is the problem? I can still use phone with twrp and stock backup rom but i want go in lower android version and i can't.
Pleas help!
Thank you