Database Users

[OTA] Moto G 2014 XT1063 v22.11.6 Android Lollipop

This OTA has been copied straight from the /cache folder by @KennyWuLee.
Download Here!
Steps For Applying the Update:
Copy the ZIP to your Moto G.
Go into Recovery.
Select "apply update from sdcard"
Choose the File which you copied.
Wait till it finishes and select reboot.
This update is specifically for the XT1063 model and isn't meant for other variants.
Update Details:
Code:
v22.11.6
Android Version: 5.0
Build Number: LXB22.39-6

Are you sure? cause the file name is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"

Any chance of this working on XT1068?

emmanuelreyes said:
Are you sure? cause the file name is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"
Click to expand...
Click to collapse
Yes, he is sure because the filename naming scheme used by Motorola automatically renames any update to the name of the firmware currently installed.
KennyWuLee, had 21.11.17 installed while he downloaded the update and that is why the filename is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"

pleomaxell said:
Yes, he is sure because the filename naming scheme used by Motorola automatically renames any update to the name of the firmware currently installed.
KennyWuLee, had 21.11.17 installed while he downloaded the update and that is why the filename is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"
Click to expand...
Click to collapse
What if i have a different version? Will it work? or i have to rename it?

emmanuelreyes said:
Are you sure? cause the file name is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"
Click to expand...
Click to collapse
pleomaxell said:
Yes, he is sure because the filename naming scheme used by Motorola automatically renames any update to the name of the firmware currently installed.
KennyWuLee, had 21.11.17 installed while he downloaded the update and that is why the filename is "Blur_Version.21.11.17.titan_retuglb.retuglb.en.US.zip"
Click to expand...
Click to collapse
@emmanuelreyes, Exactly what @pleomaxell said. Plus here's the screenshot running on my XT1063.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is there a chance to make this file a flashable zip through TWRP? For some reason it doesn't want to install, it says "/system/lib/hw/sensort.MSM8226.so" has unexpected contents :S

Fine to XT1068
Thanks and this works fine with my XT1068, check this post http://forum.xda-developers.com/showpost.php?p=56765946&postcount=138

@Taimur Akmal why does the screenshot show an Exclamation(!) sign with the network icon?

pleomaxell said:
@Taimur Akmal why does the screenshot show an Exclamation(!) sign with the network icon?
Click to expand...
Click to collapse
It shows that I am without an Internet connection. I have Mobile Internet turned off.

Cannot lock bootloader
tbunlmtd said:
Working just fine, thanks!
Click to expand...
Click to collapse
I am stuck here too. Cannot relock bootloader ...
build version KXB21.85-17; System version: Blur_Version.21.11.17.titan_retuglb.retuglb.en.US
I have downloaded the same firmware from http://sbf.droid-developers.org/phone.php?device=36
Applied flash according to :
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
Click to expand...
Click to collapse
getting downgrade error, PIV signed image error, sst lock fail error !
[NB: I have changed to US version (retuaws) before and flashed back to global ]

Sounds like your on a XT1063. This is what I did when I was in the same position as you. I restored my Nandroid of KK. If you have a all stock copy then you should be better then I was & about to skip a few of these steps. I found a system dump on here of the stock system & started pushing the files I knew I removed. Actually I used ES File Explorer & done a select all, copy, paste. You get prompted to ask what to do about files that are already there. Check apply to all & choose skip. This left me with a audio file that was replaced & had to be change back. You should make a new Nandroid to save your work to this point. Flash the stock recovery & run the update.zip. mine installed fine with the unlocked bootloader & root.
L is really buggy tho so be warned.

Sorry for the noob question.
I have the XT1063 and my system version is 21.11.14 titan_retla.retla.en.01 . Will this ota work on my phone?

rasbin said:
Sorry for the noob question.
I have the XT1063 and my system version is 21.11.14 titan_retla.retla.en.01 . Will this ota work on my phone?
Click to expand...
Click to collapse
I doubt it will without flashing the other firmware.

rasbin said:
Sorry for the noob question.
I have the XT1063 and my system version is 21.11.14 titan_retla.retla.en.01 . Will this ota work on my phone?
Click to expand...
Click to collapse
You will have to flash via fastboot the XT1063 retugbl firmware in order to use this OTA file.
Check this thread, but consider making a full backup.

My md5 checksum:
2e632d07edc3c1ceb38a0ee486f12a5b

you need the bootloader unlocked?

I successfully flashed this while being fully stock/locked bootloader. Everything works except the flashlight won't turn back off after I activate it... anyone else have this issue?

patrickjaden said:
I successfully flashed this while being fully stock/locked bootloader. Everything works except the flashlight won't turn back off after I activate it... anyone else have this issue?
Click to expand...
Click to collapse
Working totally fine on my end. You are talking about the Flashlight from the Notif menu right?

Taimur Akmal said:
Working totally fine on my end. You are talking about the Flashlight from the Notif menu right?
Click to expand...
Click to collapse
Yes the bootloader needs unlocked to flash the stock firmware.

Android 5.0.2 Factory image[BR]

hello all today i am going to share factory images of Lollipop 5.0.2​
xt1033[Dual Sim]: Download Link
xt1032[Single Sim]: Download Link
Mfastboot: link
Steps to restore stock firmware:
1) Reboot the phone into bootloader mode. There are 2 ways to do this.
I) The 'hardware' way.
a) Unplug the USB cable and power off the phone.
b) Press and hold 'Volume down' then power on the phone.
c) Connect USB cable to your computer.
II) The 'software' way.
a) Enable developer mode on the Moto G (Settings-> 'About Phone'. Tap 7 times on 'Build Number')
b) Enable USB debugging. (Settings -> 'Developer options' -> 'USB Debugging' -> check)
c) Connect phone to computer via USB, you should see a new ADB device detected and drivers installed.
d) Open "Minimal ADB and Fastboot". Type:
Fastboot commands:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
have attached batch file for easy flashing
Happy flashing

xt1032 mirror by @likurik : Download link

reserved 1

Can you show the contents of the file?
Sent from my Nexus 5

three hours to download one zip.file.Nice!
Mirror for xt1032 https://mega.co.nz/#!rNASwDhJ!aFGvFF0atLS2QisasQYhchxig718AUW6wU2CpeufK1Y

uhm... ooookkk... you know there are factory images already available for about 2 weeks ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anyone knows a Recovery, which is compatible with the new bootloader?

Go to development section and check recovery threads, it's clearly mentioned there with what it's compatible. Small hint, latest TWRP for example.

brainscollector said:
Go to development section and check recovery threads, it's clearly mentioned there with what it's compatible. Small hint, latest TWRP for example.
Click to expand...
Click to collapse
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller

I downloded it, i was GPE 5.0.1, tryed to flash via fastboot but the phone dont boot, its blocked @ bootloder unlocked image. the install seems to have no errors... any ideas?

ROOT FOR MOTO G LOLLIPOP 5.0.x
jonas210678 said:
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/xt1032/openrecovery-twrp-2.8.1.0-xt1032.img
Also you don't need to use superuser flashable by custom recovery,
http://www.theandroidsoul.com/chainfire-releases-android-5-0-root-moto-g-moto-x-2013-2014-editions/
For all Moto G variants, and works fine. Just turn on into fastboot mode, plug in phone (remember to have enabled USB Debuging in developer options), unzip archive and run windows bat to root device. I can confirm it's working as tested by myself. No custom recovery needed, just unlocked bootloader (obviously) and it's done.
I'm proposing to follow this guide for theaking
http://forum.xda-developers.com/moto-g/general/tweaks-motorola-stock-5-0-2-basic-tweaks-t3012488
And use greenify with donation pack to maintain full control over running apps

jonas210678 said:
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller
Click to expand...
Click to collapse
Lastest TWRP is as compatible as on GPE 5.0.1. Tried myself 3 days ago, rooted from there.

stock!!!???
excuse me for asking but I am new here , so I want to Know , is this an official firmware from google and can I get future updates after flashing this rom ??

abd8030 said:
excuse me for asking but I am new here , so I want to Know , is this an official firmware from google and can I get future updates after flashing this rom ??
Click to expand...
Click to collapse
It's Official Firmware from Motorola and yes, you will recieve future updates.

pico hackr said:
hello all today i am going to share factory images of Lollipop 5.0.2
Click to expand...
Click to collapse
please share your links in the existing thread in the development section.
Thread closed

[ROOT] [RECOVERY] Install SuperSU and TWRP on Official Lollipop 5.0.2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[YOUR WARRANTY IS NOW VOID]
****I TESTED ONLY ON MY XT1058 MODEL I DON'T KNOW IF WORKS ON OTHER MODELS***
-First you need to unlock your bootloader [MORE INFO CLICK HERE]
-Install the motorola drivers [DOWNLOAD HERE]
1.- Activate developer settings and copy the "UPDATE-SuperSU-v2.46.zip" to the Internal Storage of the Moto X
2.- Reboot your Moto X on Fastboot Mode (Power + Volume Down Key) (at least 5 seconds)
3.- On Fastboot Mode, connect your device to the USB port of your PC
4.- Go to the downloaded folder and run the "Installer.bat" file
5.- Continue with the instructions of the program, the program will send the recovery to the Phone, now in your phone select "Recovery" option and press the Power Up Key.
6.- When you are in the TWRP recovery select "Reboot", then "System", the swype to install SuperSu.
7.- When your phone has booted normally, select "Install SuperSu" and follow the instructions that appears on phone screen
SCREENSHOTS
[DOWNLOADS]
Google Drive: https://drive.google.com/file/d/0B0yyE-L_FGXrLXpPMlZpSk05dnM/view?usp=sharing
ZippyShare: http://www30.zippyshare.com/v/ua3qv2bK/file.html
MEGA:https://mega.co.nz/#!gQpQTCAa!krYHdwWDCZSlm14PkgNombjSOB1sdfjy4SVnbqr3NnI
VIA: Moto X Brasil

Works on my xt1060 thanks

sorullo_xgrx said:
Works on my xt1060 thanks
Click to expand...
Click to collapse
Wait you Flashed the Soak Test to your XT1060? I thought 1060 was only VZW?

gchase23 said:
Wait you Flashed the Soak Test to your XT1060? I thought 1060 was only VZW?
Click to expand...
Click to collapse
It is but I switch the T-Mobile and its working great

Worked great for me. Unlocked Bootloader XT1058 AT&T US on 5.0.2

Will I be able to go back to stock after doing this? I mean there's no sbf for 5.0.2 yet, so is there anyway to revert this process?
I haven't done it yet, won't do if theres no way to go back.
Thanks

changes the stock recovery?or is only temporary

lukaop said:
Will I be able to go back to stock after doing this? I mean there's no sbf for 5.0.2 yet, so is there anyway to revert this process?
I haven't done it yet, won't do if theres no way to go back.
Thanks
Click to expand...
Click to collapse
Yeah you can always go back to stock by flashing 4.4.4 sbf file. I just flashed on my XT1053 and it works just fine.

ken1645 said:
Yeah you can always go back to stock by flashing 4.4.4 sbf file. I just flashed on my XT1053 and it works just fine.
Click to expand...
Click to collapse
Really? Thought you couldn't downgrade from 5.0 to 4.4, but I will wait for an 5.0 sbf just in case.
Anyway, thanks!

TWRP and SU included in the 5.0.2 ROM

Found out can't downgrade from 5.0 to 4.4.4 and am screwed after trying to take an OTA soak update.
edit: found a way how... it's sneaky though. Use the stock 4.4.4 recovery files, but for the gpt.bin file, replace it using a gpt.bin file from one of the leaked 5.0.2 recovery files and flash as normal to get back to 4.4.4. I had a 1% battery stuck bug though after doing this and discovered by killing the phone all the way to 0% shut down and then recharge the battery meter fixed itself again. Got all the way back to stock 5.0.2 soak test once again after doing this.

The stock recovery of lollipop is the same as KitKat?

ken1645 said:
Found out can't downgrade from 5.0 to 4.4.4 and an screwed after trying to take an OTA soak update.
Click to expand...
Click to collapse
I'm in a similar situation. sucks...

vikramkhalsa said:
I'm in a similar situation. sucks...
Click to expand...
Click to collapse
I found a way how... it's sneaky though. Use the stock 4.4.4 recovery files, but for the gpt.bin file, replace it using a gpt.bin file from one of the leaked 5.0.2 recovery files and flash as normal to get back to 4.4.4. I had a 1% battery stuck bug though after doing this and discovered by killing the phone all the way to 0% shut down and then recharge the battery meter fixed itself again. Got all the way back to stock 5.0.2 soak test once again after doing this.

ken1645 said:
I found a way how... it's sneaky though. Use the stock 4.4.4 recovery files, but for the gpt.bin file, replace it using a gpt.bin file from one of the leaked 5.0.2 recovery files and flash as normal to get back to 4.4.4. I had a 1% battery stuck bug though after doing this and discovered by killing the phone all the way to 0% shut down and then recharge the battery meter fixed itself again. Got all the way back to stock 5.0.2 soak test once again after doing this.
Click to expand...
Click to collapse
I saw that, but I don't want to brick my phone.. Isn't that likely using this way?

Vivjen said:
TWRP and SU included in the 5.0.2 ROM
Click to expand...
Click to collapse
What's in this? because after i flashed this the phone lost signal and even though i flash european modem won't fix it.

alexhdkn said:
What's in this? because after i flashed this the phone lost signal and even though i flash european modem won't fix it.
Click to expand...
Click to collapse
I looked at that zip. With regards to the modem, it flashes an unknown version (soak version?) of both NON-HLOS.bin AND fsg.mbn
I am running LP 5.02 (soak2) with the stock att xt1058 4.4.4 modem without issue, so it *might* work if you extract NON-HLOS.bin and fsg.mbn from your stock version of 4.4.4 and run the following from fastboot:
Code:
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
Good luck.

Ctrl-Freak said:
I looked at that zip. With regards to the modem, it flashes an unknown version (soak version?) of both NON-HLOS.bin AND fsg.mbn
I am running LP 5.02 (soak2) with the stock att xt1058 4.4.4 modem without issue, so it *might* work if you extract NON-HLOS.bin and fsg.mbn from your stock version of 4.4.4 and run the following from fastboot:
Code:
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
Good luck.
Click to expand...
Click to collapse
Somehow i managed to downgrade everything, even the bootloader. After the flash of your zip i tried to flash fsg and modem but it seems that i forgot to erase the two st1/2. Thanks for the interest though

ken1645 said:
Found out can't downgrade from 5.0 to 4.4.4 and am screwed after trying to take an OTA soak update.
edit: found a way how... it's sneaky though. Use the stock 4.4.4 recovery files, but for the gpt.bin file, replace it using a gpt.bin file from one of the leaked 5.0.2 recovery files and flash as normal to get back to 4.4.4. I had a 1% battery stuck bug though after doing this and discovered by killing the phone all the way to 0% shut down and then recharge the battery meter fixed itself again. Got all the way back to stock 5.0.2 soak test once again after doing this.
Click to expand...
Click to collapse
I did the same but just deleted the gpt.bin reference line in the xml to skip over flashing it. I'm not now .38 soak test

So it is safe to downgrade? I would like come back to stock 4.4.4 and then install CM12, my question is because of the bootloader version I read a downgrade may cause brick
Sent from my XT1058 using XDA Free mobile app

Android Lollipop Stock Motorola Firmware

Official Lollipop 5.1 Stock Firmware Is Now Aavailable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
1. http://goo.gl/a55tZ6 [Credit: File Factory]
Installation Method:
1. Download Firmware and Extract it to a folder
2. Download mfastboot v2 and Extract it into the same folder.
3. Reboot the phone into Bootloader
4. Run Following commands from the Command Prompt after cd-ing to the folder, one by one
If you do not wish to lock bootloader skip 4.1 and 4.3
4.1
Code:
mfastboot.exe oem lock begin
4.2
Code:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
4.3
Code:
mfastboot.exe oem lock
4.4
Code:
mfastboot.exe reboot
IF YOU THINK I HELPED YOU PLEASE PRESS THE THANKS BUTTON THAT WON'T COST YOU A THING ​

Reserved!!

My phone is locked, do i need to unlock it?

@[email protected] , There is already a thread with firmwares which already contains 5.1
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795/page14
So why have you started the new one?
P.S
That's funny cause I saw a line "search before posting" in your signature
And just to you know everybody knows that link to filefactory to download moto g firmwares
Yep, may be I'm a bit rude but I'm just saying that starting a new thread you made nothing new to show this community

@[email protected]
no need of exe extensions

I have a XT1033, stock ROM, stock recovery, rooted.
1 - if I want to upgrade to 5.1, must take root and update by OTA?
2 - Or use the mfastbost to install 5.1?
3 - If I use mfastbot, you must remove the root?
4 - And if I use mfastbot, I lose my application data?
Sorry for my bad english

Weeslleey said:
I have a XT1033, stock ROM, stock recovery, rooted.
1 - if I want to upgrade to 5.1, must take root and update by OTA?
2 - Or use the mfastbost to install 5.1?
3 - If I use mfastbot, you must remove the root?
4 - And if I use mfastbot, I lose my application data?
Sorry for my bad english
Click to expand...
Click to collapse
* Use mfastboot and install 5.1 (as he mentioned, skip 4.1 and 4.3 to avoid relocking bootloader)
* After completing the process flash any custom kernel ( use this thread-> http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621 )
* Then flash supersu to get root access ( https://download.chainfire.eu/696/SuperSU )

Weeslleey said:
I have a XT1033, stock ROM, stock recovery, rooted.
1 - if I want to upgrade to 5.1, must take root and update by OTA?
2 - Or use the mfastbost to install 5.1?
3 - If I use mfastbot, you must remove the root?
4 - And if I use mfastbot, I lose my application data?
Sorry for my bad english
Click to expand...
Click to collapse
1- yes,full unroot and update by OTA
2- if step 1 fail, update 5.1 by mfastboot
3- yes,will lost root and you have to root again
4- dont use : mfastboot.exe erase userdata, it will keep your data.
Hope it help.

bloodhound42 said:
@[email protected]
no need of exe extensions
Click to expand...
Click to collapse

This is for EU or US devices?

christianvari said:
This is for EU or US devices?
Click to expand...
Click to collapse
For all models.
check out which one is sutable for u r model.

Well, I for example, don't see any en-EU ROM with 5.1. So it's not for all models after all...
Sent from my XT1032 using Tapatalk

Is this soak test?

it's not...it's official firmware...

flashing custom karnel is necessary ? i flashed su zip got bootloop

N3tro said:
Is this soak test?
Click to expand...
Click to collapse
official

Tjsdj said:
flashing custom karnel is necessary ? i flashed su zip got bootloop
Click to expand...
Click to collapse
if want to root u need to flash custom kernel.

[email protected] said:
if want to root u need to flash custom kernel.
Click to expand...
Click to collapse
thanx man i dint got many karnels for stock rom ,flashed KAMINARI KERNEL it worked

Tjsdj said:
thanx man i dint got many karnels for stock rom ,flashed KAMINARI KERNEL it worked
Click to expand...
Click to collapse
u r welcome :fingers-crossed::good:

[email protected] said:
if want to root u need to flash custom kernel.
Click to expand...
Click to collapse
LoLno. Custom kernels have nothing to do with root.

Can't access GSM phone after a return to stock

Dear All,
I was on Validus rom 8.10 r4, then i decided to sell the phone and go back to stock and relock bootloader.
I use the toolkit of Motorola Moto G5+ Toolkit.
I flashed and everything went good. Restarted and I can't access to my network.
I have the Amazon version Italian.
Xt1685 Retail...
please help me

tufoz said:
Dear All,
I was on Validus rom 8.10 r4, then i decided to sell the phone and go back to stock and relock bootloader.
I use the toolkit of Motorola Moto G5+ Toolkit.
I flashed and everything went good. Restarted and I can't access to my network.
I have the Amazon version Italian.
Xt1685 Retail...
please help me
Click to expand...
Click to collapse
You have an XT1685 Retail Italian version... Or a Amazon ad supported version? It can't be both, the fact you may have purchased it from Amazon it not relevant.
That aside... 99% chance the radio firmware did not flash correctly. Reflash the ROM manually and watch each step for a failure, if any piece fails, repeat it up to 3 times before continuing (radio firmware often requires 2 or sometimes 3 attempts to flash properly).

acejavelin said:
You have an XT1685 Retail Italian version... Or a Amazon ad supported version? It can't be both, the fact you may have purchased it from Amazon it not relevant.
That aside... 99% chance the radio firmware did not flash correctly. Reflash the ROM manually and watch each step for a failure, if any piece fails, repeat it up to 3 times before continuing (radio firmware often requires 2 or sometimes 3 attempts to flash properly).
Click to expand...
Click to collapse
https://s17.postimg.org/l8pargixr/P1040621.jpg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

so what firmware do you suggest?
I used this procedure and one step fails.. i will do it again...
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot

tufoz said:
so what firmware do you suggest?
Click to expand...
Click to collapse
Retail Italian, whatever is current... Your missing the point though, you need to flash it manually because the most likely case is the radio firmware (NON-HLOS and fsg.mbn) didn't take correctly.

acejavelin said:
Retail Italian, whatever is current... Your missing the point though, you need to flash it manually because the most likely case is the radio firmware (NON-HLOS and fsg.mbn) didn't take correctly.
Click to expand...
Click to collapse
Thanks sir...
I will do it...
So I will pick this one: "POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" Agreed ?

tufoz said:
Thanks sir...
I will do it...
So I will pick this one: "POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" Agreed ?
Click to expand...
Click to collapse
That firmware appears to be for US devices, which firmware did you lock your device with?
As far as I know, retail EU (software channel retEU) device firmware is up to NPNS25.137-33-11 . I do not know if the npn25.137-92 firmware is suitable for EU devices.

echo92 said:
That firmware appears to be for US devices, which firmware did you lock your device with?
As far as I know, retail EU (software channel retEU) device firmware is up to NPNS25.137-33-11 . I do not know if the npn25.137-92 firmware is suitable for EU devices.
Click to expand...
Click to collapse
edit..
everything went good but still no netw access..
i can see the list of the network but if i try to log in .. it fails..

tufoz said:
edit..
everything went good but still no netw access..
i can see the list of the network but if i try to log in .. it fails..
Click to expand...
Click to collapse
Hmm, is the the Wi-Fi network or the SIM/telephone network you're trying to access?
If the SIM/telephone network, check your mobile APNs are set correctly, and check if the SIM is working in another device (to verify it's not the SIM at fault).

echo92 said:
Hmm, is the the Wi-Fi network or the SIM/telephone network you're trying to access?
If the SIM/telephone network, check your mobile APNs are set correctly, and check if the SIM is working in another device (to verify it's not the SIM at fault).
Click to expand...
Click to collapse
mobile career network...
I done this: returned to stock and the carrier doens't work
Flashed Validus and it doesn't work
But If i Flash omnirom it starts to work.. and then i can flash validus over omnirom to let it work.... very strange!
so what does Ominrom has in order to let it work? Omni rom is the turning point..

tufoz said:
mobile career network...
I done this: returned to stock and the carrier doens't work
Flashed Validus and it doesn't work
But If i Flash omnirom it starts to work.. and then i can flash validus over omnirom to let it work.... very strange!
so what does Ominrom has in order to let it work? Omni rom is the turning point..
Click to expand...
Click to collapse
is 4g working ?

tufoz said:
mobile career network...
I done this: returned to stock and the carrier doens't work
Flashed Validus and it doesn't work
But If i Flash omnirom it starts to work.. and then i can flash validus over omnirom to let it work.... very strange!
so what does Ominrom has in order to let it work? Omni rom is the turning point..
Click to expand...
Click to collapse
The fact that some ROMs work and others don't means your radio firmware did not flash correctly, it is incorrect (US firmware on EU model). I know you said it flashed it correctly, but the symptoms dictate otherwise.
Some ROMs support Marshmallow firmware and others Nougat... But stock requires kernel and firmware match.

I have the same problem, now my imei is on "0" the two imei the same, and i have "without service", so i cant call anyone, i cant use mobile network.

acejavelin said:
The fact that some ROMs work and others don't means your radio firmware did not flash correctly, it is incorrect (US firmware on EU model). I know you said it flashed it correctly, but the symptoms dictate otherwise.
Some ROMs support Marshmallow firmware and others Nougat... But stock requires kernel and firmware match.
Click to expand...
Click to collapse
Can be that i chose the wrong stock file image? now on "pixelEperience" i have GSM signal but only in 3g
rakesh95 said:
is 4g working ?
Click to expand...
Click to collapse
It seems no..

tufoz said:
Can be that i chose the wrong stock file image? now on "pixelEperience" i have GSM signal but only in 3g
It seems no..
Click to expand...
Click to collapse
I have the same problem, the same the same, i want my 4G+ again :crying:

I have the same problem. I manually flashed the stock firmware (NPN25.137-92) many times but I still get no service. Both NON-HLOS and fsg.mbn seem to have flashed without any errors. The only parts that fail are the following:
fastboot erase customize (permission denied)
fastboot erase clogo (permission denied)
When I flash PixelExperience or crDroid only 3g works. I tried changing APN settings but no luck.

Yoga K. said:
I have the same problem. I manually flashed the stock firmware (NPN25.137-92) many times but I still get no service. Both NON-HLOS and fsg.mbn seem to have flashed without any errors. The only parts that fail are the following:
fastboot erase customize (permission denied)
fastboot erase clogo (permission denied)
When I flash PixelExperience or crDroid only 3g works. I tried changing APN settings but no luck.
Click to expand...
Click to collapse
so it's a common situation.... where are you from?

tufoz said:
so it's a common situation.... where are you from?
Click to expand...
Click to collapse
XT1687 retail US

tufoz said:
so it's a common situation.... where are you from?
Click to expand...
Click to collapse
I have one also XT-1681 NPN25.137-92 no imei's showing.

Yoga K. said:
XT1687 retail US
Click to expand...
Click to collapse
Hmm, to the best of my knowledge, NPN25.137-92 is not a firmware designed for retus devices - I think the latest for US devices is NPN25.137-83.
I don't know if you can safely downgrade to NPN25.137-83 now you've flashed NPN25.137-92 onto your device. You may have to wait for a newer retus firmware or if you do downgrade, avoid using OTA updates.