Related
hi...
as the title...
who all are succeded in connecting usb external hdd to iconia ?
cause i tried with two, and booth are not recognized
one is pendrive sense 320gb, second is wd 250gb
all you who can connect, whats your hdd??
fyi, i can connect card reader and usb thumb drive
UPDATE
OKEY..
so i tried connecting my hdd through a powered usb hub, and still no luck,
i tried connect it with a Y cable, one to iconia and onte to powered hub, also no luck ...
is there any other way to try ? tried every thing from usb mount all, ntfs mount, charging while plugging , usb powered, new HDD, fat32 formatted , ntfs HDD and all in vain...
if not then, i am sure my device is defective of something....
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
FloatingFatMan said:
How were they formatted? At those sizes, I'm going to guess they were formatted to NTFS which Android cannot read natively. There is, however, a thread in the Development section which includes a driver to enable NTFS support on the A500.
Click to expand...
Click to collapse
the first one have fat32 and nts partition, but the second one have 250gb full of fat32
i have installed ntfs mount and usb mount all, they just are not detected at all..
I just got my tab today, rooted and installed ntfs mount. No problems getting into my 500gig external hdd, formatted in ntfs.
Sent from my A500 using Tapatalk
I tried both 320gb Seagate and 750gb passport worked fine...They both formatted in fat32.
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
l live in china ,very far from you .....
i still wait for the 3.1 update.
i am not sure can i receive ota update if i root it.
so i dont root ,and still wait.
well ,if i get the update of 3.1 ,i will come back and reply .
i have a 2T hdd, buffalo.
Okey... So now i have tried at least 6 different hdd and all failed...
I start to think ut is my hardware or rom problem?
Any solution ?
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
urbie47 said:
When i first connected a hdd i also thought it didn't work. When i looked at mnt/usb_storage.........no filelist. But when i got a cup of coffee and looked again the filelist was there. Apparantly the Acer needs a time to scan the HDD which can be long when it is large. So l'lle patience.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
how long actually ??
becauuse if this problem persist, i think i will take my device to the service centre,
btw, do they will know that i am rooted ?
last update : i have connected my hdd to iconia for about an hour without any luck,.
come on, do some one here can make a solution for me please ??
i can connect flash drive and card reader but not hdd, tried 6 different of them
even i asked in local acer forum in my country, everyone dont have problem...
so, what you think my problem here?
do i must do factory reset ?
interqd said:
HM.. IT SEEMS , ONLY I CANT Get my hdd TO WORK IN ICONIA...
wonder why
is anyone here in asia or may be in indonesia??
may be this is rom related ?
Click to expand...
Click to collapse
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
iCurmudgeon said:
Are you sure you have power (external) going into your HD? I tried a WD portable and it wouldn't be read by the A500 until I connected it to an external power supply. Then I could read it without any problems.
Click to expand...
Click to collapse
how to connect it with external power supply ?
my hdd has only 1 usb slot, not 2 ..
Guy's....just download (HP USB Disk Storage Format Tool) to format your HD's to fat32. I did my 250 & 500GB HD and it work just find. Windows just don't format right...that's why I don't use windows to format my HD's. If you have Linux use Gparted.
I have
http://forum.xda-developers.com/showpost.php?p=14129262&postcount=8
I also have a 250gb that I can't get to read but then it needs dual-powered cable to be read on my laptop so I expected that. But my 320gb Buffalo, my 32gb Patriot and my 80gb Maxtor read just fine. All are NTFS. I have a 160gb from work that I will try tomorrow.
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Euclid's Brother said:
Connect it to windows and pull up the disk administrator (where you create partitions) and see if the disk is basic or dynamic? Just a hunch... have you tried different cables? And finally I want to be sure you are plugging it into the full sized USB pert and not the micro USB.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
i am using mac, not windows, my hdd connect fine to mac, how to do this on mac?
not only different cables, yesterday i went to an it mall, there i tried almost 5 different 500gb hdd 2.5 inch, all failed, all have fat32 format, cause i checked them on my mac beforehand
yeah, of course i connect it to the usb 2.0 port..
this is what i dont understand, everyones hdd work fine in the iconia, why my iconia just cant read?
mine don't work either. I have a 1 TB western digital hard drive.
i use ntfs mount,first time install that ntfs mount apk...cant read my hdd but aftter reboot my iconia all partition on hdd can read and walk normal like on my laptop
I'm in Jakarta, so I don't think it can be a rom thing. Are you using NTFS mount, or just trying to plug the HDD into your tab and use the built-in software? Try this and it should fix the problem.
hi
i have acer a500 and i have 4.0.3 stock without root and i try to connect my hdd wd NTFS and i see nothing on root explorer or es file explorer or..oi file manager..
what i'm wrong with?
thanks
I7210I said:
hi
i have acer a500 and i have 4.0.3 stock without root and i try to connect my hdd wd NTFS and i see nothing on root explorer or es file explorer or..oi file manager..
what i'm wrong with?
thanks
Click to expand...
Click to collapse
It could be a number of things.
First of all, what is the hd you are connecting?
Is it a portable?
Some work and some don't.
A portable HD that does work will draw power from the A500.
When you plug it in you will hear it spin up and the light will flash on it, indication it is being read.
If the light comes on and then immediately goes off then the drive wont work because it probably requires more power.
Also in your file manage it will come up as usb.
And if it does work you nedd to let the A500 read it before opening your file manager.
It will be ready to see in the file manager when the light stops blinking.
Some have found the following to work on some tablets.
Freecom Mobile Drive Classic II 500gb
Seagate GoFlex 1TB
500 gb Freeagent Go
Samsung S2 Portable 640 GB
LaCie's 500GB Rikiki
WD 500G Passport Elite
WD myBook 500GB
WD Elements Portable SE 500GB
Seagate FreeAgent Go Flex 1TB
Seagate FreeAgent GoFlex 500 GB
freeagent go 250gb
maxtor basics portable storage 500GB
Transcend 320gb Storejet external HDD
Iomega 500GB Select Portable
Toshiba Canvio USB 2.0 500 GB
To keep a master list I added from other posts below:
Toshiba Canvio USB 2.0 1TB
Add Transcend 320gb to the list. (NTFS SATA)
Also WD Elements 1Tb (ext power required)
Also add Samsung s2 1Tb and Hitachi Touro 1Tb too, both NTFS sata...
i connect wd essential se 750GB
http://wdc.com/en/products/products.aspx?id=430
it sounds that it works also it shows the light but i can;t see anything
now i'm with 4.0.3 but before i was with 3.2.1 and it works well
so i think the problem maybe with the 4.0.3
someone can help please?
I7210I said:
someone can help please?
Click to expand...
Click to collapse
I will hook my hdd later and see if it works and where it shows up, and get back with you.
mine worked fine, and shows up under mnt/usb_storage
I7210I said:
someone can help please?
Click to expand...
Click to collapse
I can advise, that sometimes, on HC, I would have to plug and unplug the USB connector several times before it would work. You might try that.
Also, I use File MAnager HD, and just select External Storage.
Add 2tb wd
still no success with it...what else i can do?it can be problem with version?
I7210I said:
still no success with it...what else i can do?it can be problem with version?
Click to expand...
Click to collapse
No answer for you mate. Try getting DriveMount from the market, and see if that gets it going. Really shouldn't need it, but in the past, some tablets had to use it for NTFS.
I7210I said:
still no success with it...what else i can do?it can be problem with version?
Click to expand...
Click to collapse
At this point try another drive.
i tried another hdd and it works ..the other one is also NTFS -WD Elements
I7210I said:
i tried another hdd and it works ..the other one is also NTFS -WD Elements
Click to expand...
Click to collapse
Glad you got it working, if possible I would reformat the one that did not work and give it a try again.
Anyone having a Seagate goflex free agent 1TB can access it through USB on a500?
EDIT: Ok, can access it. Had some problems with the cable earlier..
NTFS is related to Microsoft licensing and Android doesnt have the neccessary license to work , most fat 32 drive will work with no problems , if you have root there are ways around the licensing issues , you might try something like this :
NTFSMount.apk
To use the NTFSMount app,you need root you should follow the instructions below;
- Install APK
- Connect HDD
- Launch app
- Select device
- Click Mount
http://*******/282572/get-ntfsmount-apk
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
can you upload again the
NTFSMount
?
and maybe it will help for you that what i did for the version
http://forum.xda-developers.com/showthread.php?t=1646042
someone can help me please??
if ther's need to re format the tab again i will do it i need that option for the hdd
I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.
subhani said:
I have the international version of the LG G2 32gb. Stock rooted with exposed framework, one or two navbar/statusbar modules installed.
I have tried a small 4gb usb drive and the G2 recognises it just fine. I have nothing bigger except for an old (perfectly working) 100gb usb external hard disk drive ntfs format. it doesn't rely on any power. USB cable from PC powers it just fine.
So when I connect this drive via USB OTG, my G2 simply doesn't see it. I've waited more than half hour to see if it is performing a media scan silently but it still doesn't show on any of my file explorers such solid and root explorer and stock one ofcourse.
Does anyone have any ideas?
Is it because it is an external hdd?
Is it because the phone can't power it on its own?
Is it that it can read only smaller cards less than 100gb? I don't have access to anything else to test.
Is USB OTG supported in aosp roms like pac man?
Thanks guys.
Click to expand...
Click to collapse
NTFS
That's your problem friend... Format it to FAT32 or root and use this
Cheers!
Really? Wow, I'm gonna have to transfer all those files from the hard drive first and then format right? I hope my G2 would recognise it then. I'll post an update soon as I can get my hands on another HDD to back up to before format.
Thanks.
Sent from my G2 using tapatalk
The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk
subhani said:
The only thing is, my other small USB drive which did work via USB OTG is also NTFS format. Why would this work and not the larger capacity external HDD?
Sent from my G2 using tapatalk
Click to expand...
Click to collapse
Are you 100% certain the other one is NTFS?
Android is not NTFS compatible out of the box (unless rooted).
Cheers!
Yes I'm sure. The 4gb USB stick that works over otg cable is actually what I used to create a quick recovery drive of my win8 laptop as soon as I unboxed it. Win8 requires the flash drive to be NTFS for the recovery image to be created. So I did as it asked and formated and it produced the recovery drive on it.
I now connect it to my G2 and it recognises the flash drive and it shows the contents as recovery files for windows.
Sent from my G2 using tapatalk
Tldr both drives are NTFS format.
Sent from my G2 using tapatalk
Hi Guys,
does anyone know if there are any issues with the OTG on the stock Galaxy S4 (i9506 Telstra)?
I purchased a Sandisk Dual USB OTG drive 64GB and for some reason after it detects it and says "USB Connector Connected", it comes up with "USB Mass Storage Safely Removed" straight away.
I have checked few of the apps on the market that check if OTG works, and they all show it is enabled on the device.
I have also formated the drive exFat and tried FAT32, and neither of them work.
any ideas why the drive unmounts automatically?
@AntaresOne. Throw some light here!
"If someone helps, never forget to hit thanks ? "
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
AntaresOne said:
@stormleader
Hello,
First, FAT32 is made to be used on disks of max 32GB (you can also use exFAT on this size as I currently do), and starting from 64GB you should always use exFAT.
Are you sure that device's USB connector is not dirty? If may be, clean it with a toothpick.
If this doesn't solve your problem, see if there are software updates for your device (could be a software issue), try also an other OTG device (a simple pendrive+OTG cable is enough)
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
cool, thanks. didn't know about the FAT32 limitation. and Yes my USB connector is clean and all. it doesn't seem to be hardware problem. I've got the latest stock 4.3.
I'll try on another S4 when I get the chance. I might need to get OTG cable, will come in handy one day. All I have right now is that Sandisk USB stick (which is very handy to have when it works )
I"ll try few more things and report back. I just wanted to check if anyone has OTG USB drive that works with the S4.
I just figured it out. I had encryption enabled on my phone memory and SD card. Not sure why this interferes with reading the USB.
It worked perfectly as soon as I disabled the decryption on the phone and SD card.
I have hard disk of 500 GB. Please some one tell me how can i attach this. I attach it with mojo and the light of hard drive blinks. But i cant see the data. I use the same hard with my other android chaines device and its work fine with that device.
robotics909 said:
I have hard disk of 500 GB. Please some one tell me how can i attach this. I attach it with mojo and the light of hard drive blinks. But i cant see the data. I use the same hard with my other android chaines device and its work fine with that device.
Click to expand...
Click to collapse
It should just work, what format is it?
It should be NTFS
Hard Disk
gwaldo said:
It should just work, what format is it?
It should be NTFS
Click to expand...
Click to collapse
I have formatted it with NTFS. Hard Disk is with only with usb case. It does not have the power . Do i need the power usb extension for this or only i attach the usb with the mojo.
robotics909 said:
I have formatted it with NTFS. Hard Disk is with only with usb case. It does not have the power . Do i need the power usb extension for this or only i attach the usb with the mojo.
Click to expand...
Click to collapse
No power, you need to put it on the USB3 port (the blue port).
I have 3 toshiba USB powered HDD, and they work.
It should work, if your using the correct power adapter.
I don't have anything in the other USB port, expect the dongle on jellybean.
Hard Disk
gwaldo said:
No power, you need to put it on the USB3 port (the blue port).
I have 3 toshiba USB powered HDD, and they work.
It should work, if your using the correct power adapter.
I don't have anything in the other USB port, expect the dongle on jellybean.
Click to expand...
Click to collapse
I purchased the powered USB hub and attach the hard drive to this . But some time hard drive shows and some time not. ok when drive shows i am not able to modify the files. Or I cant delete any thing from the device.
robotics909 said:
I purchased the powered USB hub and attach the hard drive to this . But some time hard drive shows and some time not. ok when drive shows i am not able to modify the files. Or I cant delete any thing from the device.
Click to expand...
Click to collapse
I've never tried through a hub.
Mojo's jellybean only supports read only, no write access on ntfs.
I've head people installing an app with root and it working that way.
I haven't tried on cm12