S5 g900f Marshmallow beta official firmware - Galaxy S 5 Q&A, Help & Troubleshooting

Hy everybody, first of all, I'm in italy so I have a galaxy s5 g900f with ITV csc lollipop version.
I wanna update my s5 with the new official beta firmware but I have read that is Arrived only OTA. I have tried to flash g900f BTU firmware and try to check software update but no update were found, so I ask here and I'm searching for help. Can someone who had updated g900f to the last beta firmware share a backup copy (twrp,rom toolbox) of his system and share it to me? I wanna test it in my own device, please xda help me! I only ask a system dump file or a backup copy, I think it can takes about a minute or two. Thanks a lot for all user who can help me. Keep me updated

WizardDeviZ said:
Hy everybody, first of all, I'm in italy so I have a galaxy s5 g900f with ITV csc lollipop version.
I wanna update my s5 with the new official beta firmware but I have read that is Arrived only OTA. I have tried to flash g900f BTU firmware and try to check software update but no update were found, so I ask here and I'm searching for help. Can someone who had updated g900f to the last beta firmware share a backup copy (twrp,rom toolbox) of his system and share it to me? I wanna test it in my own device, please xda help me! I only ask a system dump file or a backup copy, I think it can takes about a minute or two. Thanks a lot for all user who can help me. Keep me updated
Click to expand...
Click to collapse
For the moment there is no working version of that firmware.
A system dump and a TWRP backup are available but they are of no use for the normal users because they both lack the MM bootloader.
Because of that you can't use them. You can flash the backup but when starting up the phone will enter in a bootloop.
The discussion thread for that ROM is here: http://forum.xda-developers.com/galaxy-s5/general/leaked-marshmallow-6-0-1-beta-firmware-t3312827
The developers thread is here: http://forum.xda-developers.com/galaxy-s5/development/samsung-s5-sm-g900f-6-0-1-official-t3311188
You can post everything in the first one, while the second is only used by developers for exchanging ideas/ways of fix the bootloader problem.
Have a perfect day!

AlexVat said:
For the moment there is no working version of that firmware.
A system dump and a TWRP backup are available but they are of no use for the normal users because they both lack the MM bootloader.
Because of that you can't use them. You can flash the backup but when starting up the phone will enter in a bootloop.
The discussion thread for that ROM is here: http://forum.xda-developers.com/galaxy-s5/general/leaked-marshmallow-6-0-1-beta-firmware-t3312827
The developers thread is here: http://forum.xda-developers.com/galaxy-s5/development/samsung-s5-sm-g900f-6-0-1-official-t3311188
You can post everything in the first one, while the second is only used by developers for exchanging ideas/ways of fix the bootloader problem.
Have a perfect day!
Click to expand...
Click to collapse
Sorry but cause this post is in eng i have some difficult to understand it, why when restoring the twrp backup phone cant? Twrp 3.0 can copy all system file so why cant it copy bootloader? Sorry in a Little noob

WizardDeviZ said:
Sorry but cause this post is in eng i have some difficult to understand it, why when restoring the twrp backup phone cant? Twrp 3.0 can copy all system file so why cant it copy bootloader? Sorry in a Little noob
Click to expand...
Click to collapse
OK, even if it's one of the XDA rules to use only english I will make a small exception just to clarify this.
Il bootloader puo essere archiviato dentro la file zip che si fa ma quando viene archiviato perde le sua firma originale. Fino quando non ha la firma originale non puo essere ripristinato con successo e il telefono va in bootloop. Tutti i sviluppatori provano di fare una firma per la file del bootloader ma nessuno non ha riuscito ancora. Quindi hai ragione quando dici che il backup puo avere anche il bootloader, ma perche questo non ha piu la firma originale non viene riconosciuto dal telefono chi poi va in bootloop perche non lo trova. Spero che ho spiegato bene.

ok, thanks fo the exception i have understand perfectly, have someone try to extract the ota.zip file before installing the update? thanks you a lot.
have a nice day!
:EDIT:
where can i found twrp backup so i can try to fix it? im not able with dump, sorry.

Il backup si trova sul dev thread indicato da me sopra. C'e il system dump originale. Non hanno riuscito di fare save a quello ota.zip

AlexVat said:
Il backup si trova sul dev thread indicato da me sopra. C'e il system dump originale. Non hanno riuscito di fare save a quello ota.zip
Click to expand...
Click to collapse
English remember

*Detection* said:
English remember
Click to expand...
Click to collapse
Yeah, man, I know the rules I just gave our colleague a little help on where to find what he was searching. So, have you managed to get it working in your phone? The devs thread has gone haywire with some saying it worked, others resetting, others downloading firmwares I'm still waiting for a safer and easier version for the moment.

We only can wait geiti94 making a tar or a flashable

Related

What about A501?

Hello all, community. I'm writing here since, as far as I know, there's no custom 3.1/3.2 rom yet. Having bought my A501 on saturday, I'd love to get an update since I read that 3.1 won't come for my Iconia, and 3.2 will be ready sometimes between Q3 and Q4. So, exactly, what the community would need to start working on an A501 3.1 rom? What can I provide to help some willing dev in cooking one?
Thanks everyone.
ciao! anche io mi lo comprato da qualche giorno! e sto diventando matto perchè voglio una rom.. però il problema sta nel fatto che i cuochi non hanno un a501 per fare testing! tu hai esperienza in campo ? ?
shadow147 said:
ciao! anche io mi lo comprato da qualche giorno! e sto diventando matto perchè voglio una rom.. però il problema sta nel fatto che i cuochi non hanno un a501 per fare testing! tu hai esperienza in campo ? ?
Click to expand...
Click to collapse
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
The point is to make sure everyone can, in theory, understand what you're saying. This is a community and as such we need to be able to understand everyone.
As for roms, I'm sure in time it'll happen.
xenx said:
4. Use the English language.
We understand that with all the different nationalities not everyone speaks English well, but please try. If you're really unable to post in English use an online translator, You're free to include your original message in your own language below the English translation.
The point is to make sure everyone can, in theory, understand what you're saying. This is a community and as such we need to be able to understand everyone.
As for roms, I'm sure in time it'll happen.
Click to expand...
Click to collapse
I'm sorry!
Let me translate what he said:
shadow147 said:
ciao! anche io mi lo comprato da qualche giorno! e sto diventando matto perchè voglio una rom.. però il problema sta nel fatto che i cuochi non hanno un a501 per fare testing! tu hai esperienza in campo ? ?
Click to expand...
Click to collapse
shadow147 said:
Hi! I bought it as well a few days ago! And I'm getting crazy because I want a rom... but the problem is that the chefs don't have an A501 to do their tests! Do you have experiences in the field ? ?
Click to expand...
Click to collapse
Unfortunately I have not such an experience in testing, but if instructed I think I could walk my way through
So if a dev shows up maybe we could start thinking about these things together.
Double post
No worries, I was able to translate it just as easily. I just thought I'd point it out. I know english isn't everyone's primary language, but it does help the big picture if we stick to one language.
I unfortunately don't know enough yet to be of any help, especially since I just got my A500 a couple days ago.
cm0901 said:
Let me translate what he said:
Unfortunately I have not such an experience in testing, but if instructed I think I could walk my way through
So if a dev shows up maybe we could start thinking about these things together.
Click to expand...
Click to collapse
Perfect if you want we can start a collaboration. many people have bought an a501 and I think they want a new ROM! What do you think?
For all A501 owners, had all the versions on my Acer but without UMTS support we would not all joy.
We ask (I mean all) about an Acer Iconia A501 heading.
mfg Börger
Börger said:
For all A501 owners, had all the versions on my Acer but without UMTS support we would not all joy.
We ask (I mean all) about an Acer Iconia A501 heading.
mfg Börger
Click to expand...
Click to collapse
Well... My A501 is sitting near to me. I just don't have a clue about what might and might not be useful, so I'd need some direction to know what I should provide.
here's another one with an A501 and the wish for an 3.1. update. Due to my Acer liquid with LCR 2.0 I'm skilled in pimping acer devices, but I need a ROM for that
Just bought an A501 and strongly whishing custom roms as well...thanks.
Yes lets make some noise for a501 ! We need custom rom
Me too, I hope to receive an update. I
tried to ask Acer but I could not get any answer.
Here's a CWM backup of my A501 ROM if it'll help with developing a custom ROM:
http://www.multiupload.com/36GQ8XP8KS
Sent from my A501 using XDA Premium App
I need a custom rom too. Pleaaaaaaaaaaaaase.
+1
Would upload my Acer_A501_1.319.01_EMEA_CUS7 too, but as a newbie to that i would really need a step-by-step-instruction how to make the desired dump.
Greetz
Just a stupid question. Have you guys actually tried any of the A500 roms? There are plenty with 3.1 and one with 3.2. And if it fails, you could always restore a backup WITH CWM recovery.
Using an A500 rom will break the bultin 3G module, that's the only difference between the two models
Basically building an A501 rom should be the same process, given the different source rom.
I'm using now virtuous galaxy for me its the best of customs from a500 .But its not so nice when I need mobile network ...

UPDATE A PROBLEM INSTALLING 2.3.4 WebTop TELCEL ATRIX

hello
I have a problem in my motorola Atrix, buy it with the company Telcel in Mexico, upgrade to version 2.3.4 with the system 45.0.7.MB860.ORANGE.EN.FR WITH 2.6.32.9 kernel version.
the situation is as follows.
when updating the manual for Atrix of Mexico that is on the next page. is in Spanish.
w w w . jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de
unlock the file start-lite.sbf zomgunlock
throw me an error .... could not run
use file-intl-fix and it worked try1.sbf
Unlocked cell correctly
Carry out the installation of the system with the following tutorial
w w w .jorgevenegas.com/2011/08/actualizar-motorola-atrix-de-telcel-de_02
install the new 2.3.4. everything correctly.
when trying to install webtop (weptop.img) threw me the following error
"load_file: could not allocate 805306368 bytes error: can not load webtop.img"
I can not install the webtop
I have updated the system but does not start webtop that I have not installed webtop.img
sorry for my English, but use a translator to help
I hope I can help ..
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
So you cant install webtop?
I can help you in spanish...email me and/or gtalk at [email protected]
Sent from my OC'd Motorola™ Atrix®
turl1 said:
EN: Are you using the 'moto-fastboot'?
--
SP: Estás usando el 'moto-fastboot', cierto?
Click to expand...
Click to collapse
hello
yes
Aqui yo lo logre!
w w w. underground . o r g . m x/index.php?topic=27287.msg139955#msg139955
Saludos
Im not have Webtop too T.T
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Stop following that guys blog.... lots of mexican atrix users with problems.
I followed guides here at xda and my phone is fully functional.
Sent from my OC'd Motorola™ Atrix®
misho52 said:
Sorry just wanted to know if they could help me because I am in the same situation, just follow the tutorial and achieve Jorge Venegas French ROM install 2.3.4 and my Atrix works great, the only detail is the WebTop that gives me the TT will be no charge option or any way you could use it and set it again?? thanks
Disculpen solo queria saber si podrian ayudarme dado que estoy en la misma situacion, igual segui el tutorial de Jorge Venegas y logre instalar la ROM francesa 2.3.4 y mi Atrix funciona de maravilla; el unico detalle es con el WEBTOP que no me da la opcion ni carga T.T habra alguna forma de poder usarlo y configurarlo de nuevo ??? gracias
Click to expand...
Click to collapse
Flash Joes Webtop. Same I told ianus.
Sent from my OC'd Motorola™ Atrix®
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Niiiceee.
Sent from my OC'd Motorola™ Atrix®
titusxperia10 said:
Yep, proceed exactly as found in the dev´s forum (from XDA obviously). I highly recommend the full BELL 2.3.4 Atrix over the leaked Orange France. Been using it from a while and everything is just fine.
Look for Bell Atrix 2.3.4 Gobstopper, from NFHimself. Good luck!
---------- Post added at 08:29 AM ---------- Previous post was at 07:52 AM ----------
Hey, me again! Well bud, if you are interested I wrote a post some time ago about what I mentioned just above, of course those are posts from real dev´s, which I thank a lot! (Credits go for them as always. NFHimselh and Eval, and so on...!) And thought this could be for help for you.
I´ve added, as you´ll realise, some own mods to procedures due to lost capabilities, howewer, after sorting those as directed, you´ll have, as stated, a very very reliable and full-functional Mexican Atrix.
This is the link to the post, cheers! God bless my beloved tequilita, mmmm!!!!
http://forum.xda-developers.com/showpost.php?p=17617098&postcount=150
Click to expand...
Click to collapse
i used the tutorials in here, used a zip file for flashing to the att 4.5.91 with 2.3.4 , but i get no webtop option in the popup, any ideas?
(entertainment center works fine if i select it)
and i got no errors during flashing the zip file
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
carlos20h said:
Any update on this i have the same problem i can install the webtop by moto-fastboot but when i connect the cellphone to the dock it did not show the popup asking me for webtop or multimedia center i have only put as a clock option
Thanks for your help
Click to expand...
Click to collapse
i solved this using the first post instrucctions on this link
http://forum.xda-developers.com/showthread.php?t=1144119

[Q] [Important] Flash stock rom on Lg L7 without kdz?

Hi xda community,
I must send my lg on warrancy because the micro usb connector is damaged.
I', currently on a custom rom stock based, and i need a method to flash the original firmware V20D (i'm italian) and relock bootloader without the use of pc. Can i flash maybe using some apps on phone or the recovery?
I need a big help guys :/
Hoooo ...... !!!
...in my opinion ,it's impossible !!!
"maybe" flashing a Stock .zip ( all .zip on the web taht i have found is rooted ) ..... and PRAY !!! that official OTA update work ! if this OTA option is not "broken" and if it purpose updates too ! ( for updates ,it's by wifi !!! lots of data ! ) ..........
in theory ,thes OTA updates clean all personalisations of the phone ! go back to factory config ...:good:
And for the zip ,it's hard to find a good...
( try with full "clean" install )
- https://onedrive.live.com/?cid=be1a8a6dd8eacb11&id=BE1A8A6DD8EACB11!114&authkey=!AD2pBbT-gPsOKlY ( v10K root ) for example ...but i don't know if it's good for update
Loulou-13 said:
Hoooo ...... !!!
...in my opinion ,it's impossible !!!
"maybe" flashing a Stock .zip ( all .zip on the web taht i have found is rooted ) ..... and PRAY !!! that official OTA update work ! if this OTA option is not "broken" and if it purpose updates too ! ( for updates ,it's by wifi !!! lots of data ! ) ..........
in theory ,thes OTA updates clean all personalisations of the phone ! go back to factory config ...:good:
And for the zip ,it's hard to find a good...
( try with full "clean" install )
- https://onedrive.live.com/?cid=be1a8a6dd8eacb11&id=BE1A8A6DD8EACB11!114&authkey=!AD2pBbT-gPsOKlY ( v10K root ) for example ...but i don't know if it's good for update
Click to expand...
Click to collapse
Thanks there isn't an italian rom to start?
Inviato dal mio XT1032 utilizzando Tapatalk
no ....this V10K is "europe" .......and as i say it's difficult ( impossible ) to find a .zip without lots of changes ...
FabioSan said:
Hi xda community,
I must send my lg on warrancy because the micro usb connector is damaged.
I', currently on a custom rom stock based, and i need a method to flash the original firmware V20D (i'm italian) and relock bootloader without the use of pc. Can i flash maybe using some apps on phone or the recovery?
I need a big help guys :/
Click to expand...
Click to collapse
lg accect rooted smartphone i dont know about bootloader
ps. i'm italian
AXD96 said:
lg accect rooted smartphone i dont know about bootloader
ps. i'm italian
Click to expand...
Click to collapse
Really? And why? however, i need torrent flash an italian stock rom before that i send the phone :/ and via recovery or maybe app like mobile odin from phone :/
Inviato dal mio XT1032 utilizzando Tapatalk
.....my poor solution have worked ???
Loulou-13 said:
.....my poor solution have worked ???
Click to expand...
Click to collapse
Not tried yet
Inviato dal mio XT1032 utilizzando Tapatalk
FabioSan said:
Really? And why? however, i need torrent flash an italian stock rom before that i send the phone :/ and via recovery or maybe app like mobile odin from phone :/
Inviato dal mio XT1032 utilizzando Tapatalk
Click to expand...
Click to collapse
hi, if you have cwm you can restore a nandroid backup(if you have) else ask some to upload his backup sorry but i have an L5
to remove cwm and restore the firmware you need a pc to use kdz to flash
----------------------------
la lg ha detto che la garanzia non decade se abbiamo il root, glielo ho chiesto anche personalmente e me lo hanno confermato
e mi hanno spiegato meglio dicendomi che se io rootto il telefono loro ovviamente non si rendono responsabili di problemi software o perdite di dati ma la garanzia hardware rimane per 2 anni dall aquisto salvo danni causati dal utente, laa batteria e le cuffie sono escluse e durano 3 e 6 mesi se non ho capito male
io ho chiesto per il root,non so se valga lo stesso per il bootloader, perché non puoi proprio usare un pc?
AXD96 said:
hi, if you have cwm you can restore a nandroid backup(if you have) else ask some to upload his backup sorry but i have an L5
to remove cwm and restore the firmware you need a pc to use kdz to flash
----------------------------
la lg ha detto che la garanzia non decade se abbiamo il root, glielo ho chiesto anche personalmente e me lo hanno confermato
e mi hanno spiegato meglio dicendomi che se io rootto il telefono loro ovviamente non si rendono responsabili di problemi software o perdite di dati ma la garanzia hardware rimane per 2 anni dall aquisto salvo danni causati dal utente, laa batteria e le cuffie sono escluse e durano 3 e 6 mesi se non ho capito male
io ho chiesto per il root,non so se valga lo stesso per il bootloader, perché non puoi proprio usare un pc?
Click to expand...
Click to collapse
I haven't a nandroid of stock rom :/ some methods like create a zip starting from the stock kdz rom?
FabioSan said:
Really? And why? however, i need torrent flash an italian stock rom before that i send the phone :/ and via recovery or maybe app like mobile odin from phone :/
Inviato dal mio XT1032 utilizzando Tapatalk
Click to expand...
Click to collapse
lg accect them to help developper and it is the only one i think
however lg promise that it will release a code to unlock bootloader without hacking,but it never happened at today ):
how did you damaged your usb??
a my friend has got the same problem it leave it at lg after more than 1 months it return at his home,but now sometimes the pc not find the phone and when he put it at recharge(ricarcarsi)it said "caricamento lento" as an usb
i hope you solve your problem
---------- Post added at 08:24 PM ---------- Previous post was at 08:22 PM ----------
FabioSan said:
I haven't a nandroid of stock rom :/ some methods like create a zip starting from the stock kdz rom?
Click to expand...
Click to collapse
i dont know about it, it is very difficult to port a firmware form .kdz in a flashable .zip
You could repair it yourself, the part is cheap on eBay and you can probably find an instructional video with a bit of googling.
I've replaced micro USB ports on a few phones in the past and it's easier than you may think, just be gentle.
Of course this will void your warranty though.
Sent from my LG-p705 using Tapatalk
News: i have converted the base rom from kdz to update.zip
If it will work i'll publish the zip
Also i think that i'll start with some modding on rom
convert kdz to zip without root and stock recovery. but u must sure zip rom working, otherwise. u can [email protected]@
kien_vip said:
convert kdz to zip without root and stock recovery. but u must sure zip rom working, otherwise. u can [email protected]@
Click to expand...
Click to collapse
Yep, but if i brick the phone i can send it for sure in warrancy ahahah xD
However, i have builded a rom test, now i check some things and after i try
Edit: it's correct this updater script? https://www.dropbox.com/s/mav12hfee6isdsm/updater-script

Need Microwear L5 firmware

I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Issue l5 update
Sadman007 said:
I need latest microwear l5 firmware.. I tried contacting microwear through [email protected].. But they don't reply, it has been more than aa month.. No update coming through Fundo Pro app.. Please someone give me the firmware if you can.
Thank you
Click to expand...
Click to collapse
I have the same problem my watch is stuck in 0.0.4 version
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
if I have the firmware file than I could have installed the firmware manually with nrf connect app
floplop said:
I have the same problem my watch is stuck in 0.0.4 version
Click to expand...
Click to collapse
contact me I managed to manually upgrade
did you have the firmware?
andimachrif said:
did you have the firmware?
Click to expand...
Click to collapse
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Hello,
My watch stands in dfu mode after upgrading a firmware that not worked.
Can someone send me a firmware a the way to flash it manually ?
Thanks
Envoyé de mon Pixel 3 XL en utilisant Tapatalk
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
Can I ask you to submit a firmware file? When updating by Fundo application the smartwatch died.
Could you tell us where to get the firmware file?
---------- Post added at 07:03 PM ---------- Previous post was at 07:00 PM ----------
I think that when we ask for help, it is so that they can provide us with a solution, and not to indicate that they have solved it and not to share the file or the solution, it is not ethical; not in this thread but in everyone. Thank you
Solución al error de actualización del firmware del MicroWear L5
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
jeyviman said:
Si te dio error al actualizar el firmware desde el fundo, instala nrf connect ejecuta y busca el dispositivo dfutarg, pulsa en Connect y luego la opción dfu, software packet Zip, busca en tu móvil en la memoria interna la carpeta fundo\frw y verás un archivo fundo.zip y enviar, a esperar y suerte.
Click to expand...
Click to collapse
Thank you very much.
Worked fine for me.
Sadman007 said:
contact me I managed to manually upgrade
Click to expand...
Click to collapse
Pm sent
Hi, Could soumebody say me where can i found : fundo\frw fundo.zip ?
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Newer version
etimarques said:
Hello, I also have a Microwear L5 but with version 0.0.6.
Is there a newer one? if yes can someone help me please?
Thank u in advance.
Click to expand...
Click to collapse
Hi etimarques,
The latest firmware is v0.1.2 now. If you install the newest FunDo Pro app from Google Play, you can look for the newest firmware from this app and install it. It stores in the Fundo.zip file, what is mentioned above.
I don't know, whether in your case the titles in the smart watch for every page appear in English or Chinese. I had v0.0.6 firmware when I've bought it, and that time the titles appeared in English. After upgrading the firmware, they became Chinese. Update only if this is fine for you.
P.S.: If you have the v0.0.6 firmware, and the titles are English, could you upload your firmware? I would prefer those titles in English.
Hello..
Is it possible to have the firmware..
I am facing the same problem..
Thanks in advance..
Hello jest w stanie pomóc mi, mój l5 po aktualizacji umarł. Proszę o podanie jego po kolei mam wgrać oprogramowanie.
Sadman007 said:
Yes I have the firmware file which can be manually flashed by the nrf connect app from play store
Click to expand...
Click to collapse
can u please send me this file with firmware?
Old firmware
Hi all,
Not sure if i'm too late on this.
When I first got my L5 9-12months ago or so, it came with 0.0.6 and I got about 6weeks of use for the first three charges.
I updated to 0.1.2 (later to 0.1.3) but I can still consistently only get about a week from a charge now.
I highly doubt this is battery related, as it came exactly as I updated -and after a few months of use prior.
Can anyone PM me the original firmware 0.0.6 if they still have it, or a link to where I can find it pls?
I'm seeing a lot of "i have it", so I'm hoping someone still does.
I'd just like to rule the firmware out of the equation.
Thanks all.

MCU update / Aggiornamento MCU

Hi I have a Chinese car radio I don't know the brand but it has
MCU: 2019.11.28 SP_53_L82_G23P48F64_Ver: 1.0
For a few days after doing a hard reset, the operating system does not open any Google apps, including the Google Play Store.
I have tried several times to reset everything, but nothing. Where can I find an MCU or firmware update?
Thank you all
Salve ho un'autoradio cinese non so la marca ma ha
MCU: 2019.11.28 SP_53_L82_G23P48F64_Ver: 1.0
Da qualche giorno dopo aver fatto un hard reset, il sistema operativo non apre nessuna app di Google, compreso Google Play Store.
ho provato più volte a resettare il tutto, ma nulla. Dove posso trovare un aggiornamento della MCU o del firware?
Grazia a tutti
Not Android Automotive OS.
I have not reported this post for moving- OP can report and have moved to (Android head-units) forum if wanted., OP has posted in wrong forum.
I have not reported this post for moving- OP can report and have moved to (Android head-units) forum if wanted.
I need help with my Android Headunit. I don’t know how to communicate on the XDA PLATFORM. I need in fo on how to access the NTG Menu. I cannot touch the screen and no sound come out. Please how do I do this!
Wrong forum, this is not Android Automotive OS.
I have not reported this post for moving- OP can report and have moved to (Android head-units) forum if wanted., OP has posted in wrong forum.
Mimix3 said:
I need help with my Android Headunit. I don’t know how to communicate on the XDA PLATFORM. I need in fo on how to access the NTG Menu. I cannot touch the screen and no sound come out. Please how do I do this!
Click to expand...
Click to collapse
READ
Wrong forum, this is not Android Automotive OS.
I have not reported this post for moving- OP can report and have moved to (Android head-units) forum if wanted., OP has posted in wrong forum.

Categories

Resources