Hello all, first post here so please be gentle, I've searched and been at this for the better part of the last 12 hours.
I have a US Cellular Note 3 and I plan on trading it in towards a new phone soon (hopefully tomorrow if I can get everything going.) I've never had a custom ROM, I rooted it with towelroot and have used supersu for superuser access and have been using it like that for the past year and a half. From what I understand in order for everything to go over smooth trading it in I need knox to be at 0x0, and for it to show stock official ROM and official device status. As of right now knox is at 0x0, it shows official ROM, but device status shows custom, also in device status in my settings it shows custom and it won't update. I deleted all of my root apps, did a full unroot with supersu, still says custom. I unmounted my SD card and wiped my partition cache, still says custom.
at this point here's what I'm attempting to do based on a few hours of digging, download and flash a stock ROM (Have Odin ready, phones plugged in, drivers installed, downloading what I hope is a good ROM) re root my phone with towelroot, reinstall supersu, run triangle away, full unroot with supersu again, factory reset.
I can't post my download link due to being a new user, I went to sammobile firmwares and punched in my model number and found a download link.
my device model number (SM-N900R4)
Also my baseband version is N900R4TYUCNAB and I'm running 4.4.2.
Now for my questions: Will flashing a stock ROM trip Knox? How do I know for sure if it's a good stock ROM? Is this the appropriate course of action? In hindsight I probably should have asked that question first.
I really hope somebody can help me out with this, I've rooted every phone I've ever had but I feel pretty over my head at the moment.
UPDATE:::: I'M AN IDIOT!
Updated to lollipop through kies fixed the issue. If google leads anybody here in the future just use kies to update.
In all my years of flashing stock Samsung ROMs, none of them have ever tripped the Knox counter.
Related
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
there are only certain roms you can flash while being on mf3. If you did the mk2 update there is no recovery out yet. Using vroot and kingo are unsafe methods of rooting so puts your device at risk.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
Install the Xposed framework from xda. Then, install the Wanam module and look for the Setting under "Security Hacks" that reads "Fake system status" and check the box and reboot.
The issue won't truly be resolved until you flash an official ROM, but the Custom screen will be gone at boot.
rzracer2 said:
The problem is the phone is showing Custom when the phone is turned on. I was on MF3, had rooted via the SD card method. The custom appeared at that point. I did a factory reset and the custom went away and lost root but the superuser app was still showing in the app draw (factory reset did not delete this). I was planning on reloading the MF3 firmware via odin but lent the phone to my daughter while I replaced the screen in her note2. Well of course she got the upgrade message to 4.3 from AT&T, did it and now the unlocked custom is back. Not sure why as it was showing as official, the trip counter was still 0 (never installed a ROM on it) BUT the superuser app was there.
Now on 4.3 I've rooted/unrooted via Kingo, during the unroot it removes superuser but the custom won't go away. I installed Triangle Away while rooted and it still shows 0 on the flash counter. Is there something in this Knox security (not sure how to check this) causing the custom?
Just want to get it back to any stock AT&T firmware so I can sell it. TIA for any help
Click to expand...
Click to collapse
unroot via kingo, then factory rest...worked for me on 4.3
Do you plan on a warranty exchange?
I love seeing the custom on boot, it lets me know and other everyday normal people know my phone is slightly modified.
ROOTED ATT MK2 using Tapatalk
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
rzracer2 said:
Not sure what I'm going to do with the phone yet, probably sell it but not totally sure. Wondering with it now showing Custom on the boot screen and in the OS will it still receive OTA updates? Hoping the AT&T 4.3 or 4.4 image will be available in the future and that might help.
Click to expand...
Click to collapse
I was rooted custom and received my OTA no problem. Yes
ROOTED ATT MK2 using Tapatalk
I searched the internet to find a solution , i was unable to find a solution that was directly linked to my problem or concern i would say. To get on with it i have a n900(Yeah i know dev support suks). I am completely stock and knox warranty is also valid(=0). I recently wanted to flash custom roms and kernels. I have about 2 months of warranty left on this phone, so what do you guys suggest?. The system status will certainly change to 'custom'. Is there a way to restore it back to official , like can u find official recovery of the n900. I just want that if i ever want to sell it, everything except for knox is reset back to normal. Thanks!
No. You can't. I suggest you to wait.
If you want root use towelroot.
If you want a custom recovery use safestrap
Both app don't alterate knox.
I will flash a custom kernel when cm12 will be out for our phone
Once you trip KNOX, it's done and can't be changed. If I recall correctly, there have been experimental tests done for Exynos version of Note 3 in order to reset KNOX flag, but I can't remember the result (may be wrong).
As for System Status and Current Binary, these can be reset to Official via Triangle Away, if you got stock kernel and recovery. You can flash stock firmware via ODIN to get these.
Someguyfromhell said:
Once you trip KNOX, it's done and can't be changed. If I recall correctly, there have been experimental tests done for Exynos version of Note 3 in order to reset KNOX flag, but I can't remember the result (may be wrong).
As for System Status and Current Binary, these can be reset to Official via Triangle Away, if you got stock kernel and recovery. You can flash stock firmware via ODIN to get these.
Click to expand...
Click to collapse
On n900 exynos you can reset knox flashing a particular kernel. (I don't know if it works now)
bolt890 said:
I searched the internet to find a solution , i was unable to find a solution that was directly linked to my problem or concern i would say. To get on with it i have a n900(Yeah i know dev support suks). I am completely stock and knox warranty is also valid(=0). I recently wanted to flash custom roms and kernels. I have about 2 months of warranty left on this phone, so what do you guys suggest?. The system status will certainly change to 'custom'. Is there a way to restore it back to official , like can u find official recovery of the n900. I just want that if i ever want to sell it, everything except for knox is reset back to normal. Thanks!
Click to expand...
Click to collapse
- Flashing custom rom/kernel will trip the Knox.
- The Knox can be reset on N900 (I don't remember where is the instruction).
- Flashing the stock firmware will restore the system status to official.
Hi all,
Phone Details:
Spring Galaxy S4
Baseband Version L720TVPUBNG5
Used CF autoroot
This all started a few days ago. The latest OTA update came out and my phone kept telling me I had insufficient storage for the update. I figured it was because I had it rooted. I followed QBking77's video for Unroot / Unbrick. Downloaded all files recommended in the video.
Every time I try to flash with ODIN I get a failure. I have tried three different .tar versions at this point, it always seems to fail after "aboot" attempts to flash. Two different cables, both came with an SGS4.
I finally had enough and used the factory reset. After factory reset I used KIES for my update. The phone took it fine and rebooted. Although now I have no WIFI.
When initiating WIFI it will tell me that the security application has rejected a request to protect my phone. I deleted lookout security even though I have never used it.
Does this have something to do with KNOX? Knox flag is at 0x1 so I know it is tripped. Is there a way to completely flash my phone back to a stock state with the original recovery and rom?
Are there any options for me to get my phone back in order. I really dont give a **** about root or roms, I just need my WIFI. Would my best bet be to use a custom firmware?
Your correct thread have to go: HERE.
my galaxy s5 model number is sm-g900t, android version is 4.4.2, ..not sure what other info might help, but anyway, i cannot update the software/firmware over the air because the device is rooted through steps on here and its been rooted awhile now. so anyway, i downloaded the kies 3 from the samsung site, it says all im supposed to do is plug the phone in, a box is supposed to pop up showing an update is needed......well, the kies box does pop up, but all it shows is current firmware version and shows my internal and external storage availabilty, and so on.... no auto update thing came up. so in kies i went into tools up a t the top, i hit firmware upgrade and initialization, then a smaller box pops up saying---does not support initializing, so now what? nothing else i can do in kies except move pic files around and such. i need to update the software. any advice? i attached 2 pics.....pic 1 is the initial message when phone is plugged in, #2 is when i go into tools and hit ugrade
knight1701 said:
my galaxy s5 model number is sm-g900t, android version is 4.4.2
Click to expand...
Click to collapse
Samsung has now embedded a security flag called KNOX in it's later devices. Unfortunately after you flash a package/custom ROM or whatever with a different signature than Samsungs own it trips that KNOX flag.
When your KNOX flag is tripped you can no longer update your phone via official methods. It is just the way it is, and there is nothing to be done. Once KNOX flag is tripped, there is no way to "untrip" it, so you will never be able to update via KIES again.
Im not really sure whether flashing a stock lollipop rom via odin works when KNOX is tripped, i have never tried it, so you should wait for any other member for confirmation. As far as i know, it shouldn't be a problem.
What i can tell you, if you have the time, is that you flash a ROM that is compatible with 4.4.2 (Omega v13 or AllianceROM v5.6 etc) and then flash it's ROMs lollipop update after a full wipe. It is the only thing i personally am sure about (i have done it before).
I'm by no means an expert on the matter but I'm pretty sure that if you can't get the Ota due to being rooted, then updating vIA Kies isn't going to work either.
Go to settings> about device> status
scroll to bottom of list and respond here what it says under "device status" (it's gong to say either official, or custom).
If it says official, you could unroot, maybe check that the proper drivers are installed on your computer, and try once again to apply the update via kies.
If it says custom, then knox has been tripped and I cannot help further.
The biggest issue here is that if you take the OTA update you'll lose the option to root or downgrade so you should probably use TWRP to install a ROM that's pre-rooted rather than trying to get the OTA
Akalsemann said:
Samsung has now embedded a security flag called KNOX in it's later devices. Unfortunately after you flash a package/custom ROM or whatever with a different signature than Samsungs own it trips that KNOX flag.
When your KNOX flag is tripped you can no longer update your phone via official methods. It is just the way it is, and there is nothing to be done. Once KNOX flag is tripped, there is no way to "untrip" it, so you will never be able to update via KIES again.
Im not really sure whether flashing a stock lollipop rom via odin works when KNOX is tripped, i have never tried it, so you should wait for any other member for confirmation. As far as i know, it shouldn't be a problem.
What i can tell you, if you have the time, is that you flash a ROM that is compatible with 4.4.2 (Omega v13 or AllianceROM v5.6 etc) and then flash it's ROMs lollipop update after a full wipe. It is the only thing i personally am sure about (i have done it before).
Click to expand...
Click to collapse
well i hear what your saying, but on my other phone, same setup, rooted and all.......updated just fine---did it about a month ago...updated to android 5 from 4.4.2..just plugged in the phone and boom it did its thing............on this other phone though, daughters phone, it wont work
Swimguy14 said:
I'm by no means an expert on the matter but I'm pretty sure that if you can't get the Ota due to being rooted, then updating vIA Kies isn't going to work either.
Go to settings> about device> status
scroll to bottom of list and respond here what it says under "device status" (it's gong to say either official, or custom).
If it says official, you could unroot, maybe check that the proper drivers are installed on your computer, and try once again to apply the update via kies.
If it says custom, then knox has been tripped and I cannot help further.
The biggest issue here is that if you take the OTA update you'll lose the option to root or downgrade so you should probably use TWRP to install a ROM that's pre-rooted rather than trying to get the OTA
Click to expand...
Click to collapse
ok, on the phone in question, device status says--- custom, guess that ends that..........on my phone howerver, it says official which is why i guess i was able to update mine
just download a rom for your phone from sammobile and install with odin and your done
So, a few months ago I decided to root my phone with towelroot to give a try on a few root applications, as i was curious, but after that, I decided to remove through supersu it as, even with supersu, was more of a vunerability since I wasn't really using it.
Fast foward a month, I attempted to update my software and was denied with the reason that my device was custom.
Some important info:
- I'm running Android Jelly Bean 4.3, that has never been updated.
- I've attempted a factory reset through the phones recovery mode and made no difference.
- My KNOX waranty value is 0x0, and I would like to keep it that way if possible.
- Phone is factory unlocked.
Also, I've though of using Odin to flash the firmware back, but then I read that there is a possible that KNOX warranty gets triggered, even with a samsung official rom, is this true or am I safe to use it?
My objective is to have my phone back to factory settings (this means wannan xposed is out of the question), in order to be able to update my phone and keep using it, and while there is a lot of similar threads around, most of them reffer to GT-I9505 and GT-I9500 and mine is GT-I9506, which leaves me in somewhat of a doubt wether I should follow those or not.
Thank you for your time.
Diaz_ said:
So, a few months ago I decided to root my phone with towelroot to give a try on a few root applications, as i was curious, but after that, I decided to remove through supersu it as, even with supersu, was more of a vunerability since I wasn't really using it.
Fast foward a month, I attempted to update my software and was denied with the reason that my device was custom.
Some important info:
- I'm running Android Jelly Bean 4.3, that has never been updated.
- I've attempted a factory reset through the phones recovery mode and made no difference.
- My KNOX waranty value is 0x0, and I would like to keep it that way if possible.
- Phone is factory unlocked.
Also, I've though of using Odin to flash the firmware back, but then I read that there is a possible that KNOX warranty gets triggered, even with a samsung official rom, is this true or am I safe to use it?
My objective is to have my phone back to factory settings (this means wannan xposed is out of the question), in order to be able to update my phone and keep using it, and while there is a lot of similar threads around, most of them reffer to GT-I9505 and GT-I9500 and mine is GT-I9506, which leaves me in somewhat of a doubt wether I should follow those or not.
Thank you for your time.
Click to expand...
Click to collapse
Flashing a stock rom trough Odin will NOT trip Knox. So just go ahead and flash the firmware you want.
Lennyz1988 said:
Flashing a stock rom trough Odin will NOT trip Knox. So just go ahead and flash the firmware you want.
Click to expand...
Click to collapse
Alright, I assume the proccess is about the same as on the other versions.
Also, should I flash 4.4.2 instead of 5.0.1? The reason I ask is due to this thread.
Update: I flashed 4.4.2 with Odin3 3.10, and it went smooth and knox is still safe, however, for some reason, so thank you Lennyz1988 for the reassurance .
However, I'm not able to update to 5.0.1 Lolipop through OTA, as attempting to update states that im fully up to date.
My phone is running as NL (T-Mobile), factory unlocked and due to my quick research, seems that there is no official OTA update for it. Is it correct or am I looking in the wrong place to update my phone?