Database Users

Meizu M2 mini

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
specs here : http://www.meizu.com/en/products/m2/spec.html
FAQs:
Will this phone work in my country? http://www.willmyphonework.net/
ROMs:
Official ROM: http://www.flyme.cn/firmwarelist-19.html
Instructions:
Download the newest version from http://www.flyme.cn/firmwarelist-19.html
You now have the update.zip, now connect your Meizu with your PC
Copy the update.zip to the main folder (internal) of your Meizu
Optional: you might want to do a factory reset, otherwise your gonna flash over your old install. To do a factory reset, go to settings -> about phone -> memory/storage
Reboot and press Vol+ & Power at the same time.
Choose System upgrade and press Start
Wait for it to install, you're done!
Root
How do I root my device?
Settings > Accounts > My Flyme > "YOURUSERNAME" > System privileges
How do I unroot my device?
Simply flash the firmware again. Clearing data is not required.
Post here for all your questions, reviews, unboxing, news and discussions on this highly anticipated phone from Meizu.
update 23-11-15
I version is here :
https://drive.google.com/file/d/0B9U0tm7Dgqjld0xQNHcyeEhmNEk/view
and the way is here:
https://translate.google.com/transl...p?route=pavblog/blog&id=18&edit-text=&act=url
xposed is here :
https://meizufans.eu/forum/topic/37...rk-on-4-5-4-1a-firmware-working-on-m2note-too
tested and work on 4.5.4.1A & 4.5.4i firmware
update 01-06-16
Flyme OS 5.1.6.0 Global is here :
http://www.flymeos.com/firmwarelist?modelId=18&type=1
Root for Flyme OS 5.1.6.0 Global is here :
https://forum.meizufans.eu/topic/5493/how-to-root-flyme-os-5-1-6-0g
update 12-08-16
Flyme OS 5.1.8.0 Global is here :
http://www.flymeos.com/firmwarelist?modelId=18&type=1
update 6-09-16
Flyme OS 5.1.9.0 Global is here :
http://www.flymeos.com/firmwarelist?modelId=18&type=1
update 29-09-16
Flyme OS Flyme 5.1.10.0 Global is here :
http://www.flymeos.com/firmwarelist?modelId=18&type=1
update 03-10-16
Flyme OS Flyme 5.1.11.0 Global is here :
http://www.flymeos.com/firmwarelist?modelId=18&type=1

No language
Hi
Can i flash m2 note International rom on my m2 mini? I need language from International version and there is no such for m2 mini

No you can't. Use the morelocale2 so get out I version for the mini
Sent from my 1+1

The following applications can be freeze without problems occur in the operation of the device:
App Center
Basic Daydream
Browser
Cloud Account/Service
Game Center
Life
Meizu Game Frame
Messages
Print Spooler
Sina Weibo Share
System Keyboard / Wallpaper
Tips / Weather

firmware flyme
Hello.
Please can you tell me if it is possible. I have meizu m2 mini with flyme 4.5.3 C.
I want to change it to version A or I is this possible?
The link you refer firmware is of meizu charme (is this the same as meizu m2 mini?)
version A what means the letter A?
thanks

ministerbeel said:
Hello.
Please can you tell me if it is possible. I have meizu m2 mini with flyme 4.5.3 C.
I want to change it to version A or I is this possible?
The link you refer firmware is of meizu charme (is this the same as meizu m2 mini?)
version A what means the letter A?
thanks
Click to expand...
Click to collapse
yes it is possible
I version It has not been issued yet
There are 4 types of firmwares:
A = Generic
U = China Unicom
C = China Mobile
I = International

paiktaras said:
yes it is possible
I version It has not been issued yet
There are 4 types of firmwares:
A = Generic
U = China Unicom
C = China Mobile
I = International
Click to expand...
Click to collapse
Thanks a lot for your answer.
Can you tell me the diverence between the A version en the C?
I live in the netherlands wich would you prefer?
To update, can i save file in internal memory and run it on phone itself?
greetings

ministerbeel said:
Thanks a lot for your answer.
Can you tell me the diverence between the A version en the C?
I live in the netherlands wich would you prefer?
To update, can i save file in internal memory and run it on phone itself?
greetings
Click to expand...
Click to collapse
I do not know what the differences.
Logically would be minimal, better to have the A I think, is generic and and all the rest in this based....
From what store bought device ?

paiktaras said:
I do not know what the differences.
Logically would be minimal, better to have the A I think, is generic and and all the rest in this based....
From what store bought device ?
Click to expand...
Click to collapse
from Pandawil

What about freezing/removing Reader application?

Removing unwanted Apps
matheush said:
What about freezing/removing Reader application?
Click to expand...
Click to collapse
I have a C version and was able to intall a real root access with Kingo and than remove the unwanted apps with a good uninstall app.
Now I have almost non chineese signs, my battery lasts mutch longer and it feels more "my phone"
One problem to solve. I can't lock the screen. Probaly because the phonenumber isn't bound. There is no way to fill the number field with a + and my international number. So I can't get a code to bind.
Is ther somebody with the same problem?

Hey everyone. I have one strange and annoying problem:
I went running, so I turned on Endomondo and Rocket Player. I started new training and started running. After few minutes both apps stopped working(without any alerts or anything). I tried few times again with Endomondo and every time when I unlocked phone the app was like freshly started. I have no clue what to do now. Now I'm trying playing some music on rocket player - after few minutes app just stops again......
Oh, and if you shake your phone do you have a feeling that something is "clunking" inside?

I heard that the A version of rom got less crappy apps than U or C. In general if you want use this phone use version A and wait for I.

Hey guys,
got this device since yesterday and wanted to remove the chinese-bloatware. But if I deinstall them with TB, they just reappear after reboot. Isn't this possible with the last firmware (Flyme OS 4.5.3.2A)?
Thank you very much!

Hello everyone,
I did all the works in trying to root it (according to every available instruction available), and still no app (and I did try a lot) has root access. Basically, just the same as this guy:
http://forum.xda-developers.com/gen...2-note-mini-root-failed-t3217530#post63159227
Has anyone encountered any such problems? Firmware is 4.5.3.1A, phone purchased off Pandawill.
Thanks in advance!
All the best,
Mihai Toma

hghfhgfhgghfhgfghfh said:
Hello everyone,
I did all the works in trying to root it (according to every available instruction available), and still no app (and I did try a lot) has root access. Basically, just the same as this guy:
http://forum.xda-developers.com/gen...2-note-mini-root-failed-t3217530#post63159227
Has anyone encountered any such problems? Firmware is 4.5.3.1A, phone purchased off Pandawill.
Thanks in advance!
All the best,
Mihai Toma
Click to expand...
Click to collapse
first of all update the device to the last firmware 4.5.3.2A and after for this tried again to root

paiktaras said:
first of all update the device to the last firmware 4.5.3.2A and after for this tried again to root
Click to expand...
Click to collapse
Thank you, this worked. Below is a short summary, in case anybody is interested.
First did an upgrade, all the settings and apps remained as they were, and the root worked. Well, Play Store had it's issues, which could have been solved. After, did a clean upgrade, and it still worked. So I guess that's the solution. Be wary that you have to use "Google Installer" in the Meizu "App Center" to install Google Play.
BUUUUUT. Now the mobile data services won't work. I did uninstall some System applications, but I stayed within those proposed by the OP in the first posts. Does anybody know where to go to solve this?
Thanks!
All the best,
Mihai Toma

hghfhgfhgghfhgfghfh said:
Thank you, this worked. Below is a short summary, in case anybody is interested.
First did an upgrade, all the settings and apps remained as they were, and the root worked. Well, Play Store had it's issues, which could have been solved. After, did a clean upgrade, and it still worked. So I guess that's the solution. Be wary that you have to use "Google Installer" in the Meizu "App Center" to install Google Play.
BUUUUUT. Now the mobile data services won't work. I did uninstall some System applications, but I stayed within those proposed by the OP in the first posts. Does anybody know where to go to solve this?
Thanks!
All the best,
Mihai Toma
Click to expand...
Click to collapse
Aaaaaand, I made it all work out. Don't really know how - after quite a few APN settings, it finally worked. Even though I'm 99% sure I did the right settings the first time. Hell knows.
So, for any others - watch out over your APN settings after a clean install. You must use your carrier's defaults (found on their website). And maybe a bit of luck/voodoo? Dunno what I did wrong the first times.

snoK123 said:
Hey guys,
got this device since yesterday and wanted to remove the chinese-bloatware. But if I deinstall them with TB, they just reappear after reboot. Isn't this possible with the last firmware (Flyme OS 4.5.3.2A)?
Thank you very much!
Click to expand...
Click to collapse
Try to freeze them only. This works for me on my m2 note. Did not try it yet on the m2 mini
---------- Post added at 09:13 PM ---------- Previous post was at 09:10 PM ----------
I got my device with 4.5.3.2 a. it has only a limited list of languages.
Has anyone the version 4.5.3 a? please update what languages it has

try to install google services, but the google installer from app center failed when try install google services. after that "a key to install" came up and i press it, but same thing happen, always failed. even uninstall and reinstall the google installer
EDIT :
I found out that the newest version that is google installer 2.0 from App Center doesn't work well. i download the 1.4.4 it's install successfully on my m2 mini running flyme 4.5.3.2a

[HELP] thread for custom ROMs

Hello everyone.
This is a
HELP thread
for asking questions regarding custom ROMs and the issues that you might have with them for this device. Before you post, please read the FAQs at the bottom, and then proceed to ask your question.
Note - the members may or may not provide you a step by step solution, and will provide you links, please check those links carefully, and if you still do not understand, ask your question again.​
If the community notices real issues (which are different from the usual "Does this work, does this not?" questions), it will be forwarded to the respective ROM thread (or we'll request you to forward).​
Help us in keeping the custom ROM threads clean and help the developers to focus on important issues.​

Device Specific Information
Codename athene in development circles. Here, we often use G4 and G4 Plus interchangeably with athene. That's why ROM titles have the word ATHENE in them. Don't be confused.
Device names according to manufacturer - XT16xx. The xx in the end changes as per region. For instance the Indian version is XT1643.
For more information regarding the device, and the availability of ROMs, etc, go to this [INDEX] thread.
Yes, the INDEX thread is mine, I'm not self promoting, I'm linking this because the older one has not been updated in a long time, and no amount of messages to moderators seems to have any effect. If you wouldn't mind, please send a message to the moderator to make this the sticky INDEX thread to help Moto G4 Plus users.
​

Note: this information is out of date.
Common bugs
Fingerprint enrollment issues. Flash Nougat to resolve this. No, you have to flash, if you don't want to, please do not post bug reports. Follow this guide by @rahulsnair to update your phone to Nougat soak test. We have a soak test because the release version has not yet been captured for us to use. You can also (although the developer still won't accept bug reports) rename the fingerprints to add more (credits @mason2smart). Also, try this as mentioned by @__Maddy.
Camera/Video recording issues. Use the built in camera, NOT Moto Camera (the camera you had on stock ROM) as your camera. You can also use any other recording app (Cameringo, Motorola Camera, Google Camera all work just fine). And yes, Motorola Camera is different from Moto Camera. Camera issues are being sorted out by the CyanogenMod team (and will reflect on all ROMs that are based on CM), and only once those issues are sorted can the developers for this device sort any issues with ATHENE out. Note that for Moto Camera to work, you need to set the DPI (Settings > Display > Display Size) to the default one.
Video playback issues. Please use this thread by @strongst for providing logs and other details. The only OS that doesn't seem to be affected by this is Vanir.
Unable to share images/screenshots from gallery or filemanager. Sort this one out by formatting your internal storage. Credits @smitharro, here.
Chop-Chop/ Torch issues. Do a reboot. It should work then.
VoLTE issues. Follow the instructions on this thread, if that doesn't help we need logs, or we really can't help.
Mobile data intermittently stops working. See this post.
CyanMod/RR bugs​
Camera issues. Update in next build.
CypherOS bugs​
Video Recording doesn't work. Use Footej/Cameringo Lite for now.
External SD read error in inbuilt file manager. Use another file manager.

LOGS
(and why we keep asking for it.)
Imagine you make a cake. And you give it to a person, who says he doesn't like it. And then leaves. You have no idea what went wrong with your food, why that person doesn't like it, what that person would see as an improvement in your cake. You eventually go mad as more people keep saying they don't like your cake, and leave without further information.
This is exactly what happens when you state your bug (that the developer cannot easily reproduce) and then leave it at that. The developer cannot figure out what went wrong. So, to find out what could possibly have gone wrong, (s)he requires a log. The log tells the developer what all errors have occurred, and what could be done to possibly fix them.
Logs are also known as logcat (and other types). Find a helpful tutorial on how to take logs here.
Best way to present logs is to either upload the file to a hosting site, or paste the contents on pastebin, or hastebin, and share the link here.​​

How to report issues here​The aim of this thread is to become a source for all members to ask questions on issues they face in all ROMs. So report your bug after specifying the ROM, and the build date. For instance, if I am using CyanMod from Silesh.Nair, which he uploaded for use on 21st April 2016, then I start my issue as
CyanMod 20160421
and we'll help you sort out your issues as much as we can, and if we are stumped, the developers will help you out. ​​

Okay, last one, stop.

Solution For Single FP over MM baseband
If anyone don't want to Flash Nougat Soak or Modem, follow this procedure ( I'm using 5 FP over MM baseband )
** Firstly you will need Fresh start **
On fresh start complete setup wizard process, DON'T add security and FP when asked..
After seting up device go to
settings > security
Add your preferable unlocking option,
Now for FP,
Add your 1st FP, it will get successfully enrolled,
And now you have 4 FP left to add..
** Follow common procedure for remaining 4 FP **
Now add next FP ( add one FP only)
Obviously you will get "Enrollment Error" on any next FP..
After every Enrollment Error Close Setting app completely ( Force stop is preferable, or better do reboot)
Now open Setting again and do same...
*** Note ***
Don't add next FP directly without closing Setting app otherwise you will get "GHOST FP"
You will be not able to remove those FP unless getting Fresh Start again...!!
Count how many FP you have added, i haven't tried adding 6th FP, so better to count 5 FP only..

__Madddy said:
I have solution for Fingerprint over MM baseband if anyone dont want to update to nougat soak or modem,
Will edit this post with it, let me correct my english... Lol...
Click to expand...
Click to collapse
Much appreciated. Please do.

When I disconnect from WiFi after extended use on CM 14 my phone tells me I'm offline. I have to reboot to use network even though it was still connected... On xt1644...
---------- Post added at 08:22 AM ---------- Previous post was at 08:18 AM ----------
__Madddy said:
I have solution for Fingerprint over MM baseband if anyone dont want to update to nougat soak or modem,
Will edit this post with it, let me correct my english... Lol...
Click to expand...
Click to collapse
If you rename each fingerprint after adding then you can add more than one

zeomal said:
Common Custom ROM bugs
Fingerprint enrollment issues. Flash Nougat to resolve this. No, you have to flash, if you don't want to, please do not post bug reports. Follow this guide by @rahulsnair to update your phone to Nougat soak test. We have a soak test because the release version has not yet been captured for us to use.
Camera/Video recording issues. Use the built in camera, NOT Moto Camera (the camera you had on stock ROM) as your camera. You can also use any other recording app (Cameringo, Motorola Camera, Google Camera all work just fine). And yes, Motorola Camera is different from Moto Camera. Camera issues are being sorted out by the CyanogenMod team (and will reflect on all ROMs that are based on CM), and only once those issues are sorted can the developers for this device sort any issues with ATHENE out. Note that for Moto Camera to work, you need to set the DPI (Settings → Display → Display Size) to the default one.
Unable to share images/screenshots from gallery or filemanager. Sort this one out by formatting your internal storage.
Chop-Chop/ Torch issues. Do a reboot. It should work then.
Click to expand...
Click to collapse
Hello I'm Using CyanMod 14.1/20161204 And Model Is XT1643, Rom Work Smoothly, Only Found 2 Small Issue...
(1) Can't Change Dialer Colour, Check The Screenshot Link
https://drive.google.com/open?id=0B1MeY85PNSircTZHX29YRFRudFk
https://drive.google.com/open?id=0B1MeY85PNSirNmJkN1pkUURUSms
(2) Can't Switch to 2G Network
https://drive.google.com/open?id=0B1MeY85PNSirZkFCcFJ5U0pwZW8
Thanks.....

swarupgolui said:
Hello I'm Using CyanMod 14.1/20161204 And Model Is XT1643, Rom Work Smoothly, Only Found 2 Small Issue...
(1) Can't Change Dialer Colour, Check The Screenshot Link
https://drive.google.com/open?id=0B1MeY85PNSircTZHX29YRFRudFk
https://drive.google.com/open?id=0B1MeY85PNSirNmJkN1pkUURUSms
(2) Can't Switch to 2G Network
https://drive.google.com/open?id=0B1MeY85PNSirZkFCcFJ5U0pwZW8
Thanks.....
Click to expand...
Click to collapse
I'm no expert, but to the best of my knowledge, these will be upstream bugs, so devs will have to wait for CyanogenMod team to fix them, before they can implement the fix.

zeomal said:
I'm no expert, but to the best of my knowledge, these will be upstream bugs, so devs will have to wait for CyanogenMod team to fix them, before they can implement the fix.
Click to expand...
Click to collapse
In 20161117 It's Work Perfectly

@mason2smart updated my post with long procedure, will try your suggestion and add to my post...?
Sent from my Moto G4 Plus using XDA-Developers mobile app

swarupgolui said:
Hello I'm Using CyanMod 14.1/20161204 And Model Is XT1643, Rom Work Smoothly, Only Found 2 Small Issue...
(1) Can't Change Dialer Colour, Check The Screenshot Link
https://drive.google.com/open?id=0B1MeY85PNSircTZHX29YRFRudFk
https://drive.google.com/open?id=0B1MeY85PNSirNmJkN1pkUURUSms
Click to expand...
Click to collapse
https://github.com/sileshn/android_frameworks_base/commit/70e87cfd06759768d451a8057522faba3922e415
2g issue, i'll take a look. Maybe some change from me botched it.
Is 2g working on other roms or is it a problem only on CyanMOD?

mason2smart said:
If you rename each fingerprint after adding then you can add more than one
Click to expand...
Click to collapse
Tried and had issue that i described in my post "GHOST FP" ...!
For that procedure i described for remaining FP must be followed...?

swarupgolui said:
Hello I'm Using CyanMod 14.1/20161204 And Model Is XT1643, Rom Work Smoothly, Only Found 2 Small Issue...
(1) Can't Change Dialer Colour, Check The Screenshot Link
https://drive.google.com/open?id=0B1MeY85PNSircTZHX29YRFRudFk
https://drive.google.com/open?id=0B1MeY85PNSirNmJkN1pkUURUSms
(2) Can't Switch to 2G Network
https://drive.google.com/open?id=0B1MeY85PNSirZkFCcFJ5U0pwZW8
Thanks.....
Click to expand...
Click to collapse
About your second question: I can't reproduce that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you sure you're on the latest (N) baseband?
Sent from my XT1642 using Tapatalk on CyanogenMod 14.1 (dualboot)

smitharro said:
About your second question: I can't reproduce that.
Are you sure you're on the latest (N) baseband?
Click to expand...
Click to collapse
N baseband does not work with custom roms. At least not for me.I installed soak test N and I stopped being able to make calls when I installed the roms. I suppose they only work with the MM baseband.

velosa said:
N baseband does not work with custom roms. At least not for me.I installed soak test N and I stopped being able to make calls when I installed the roms. I suppose they only work with the MM baseband.
Click to expand...
Click to collapse
Well then you supposed wrong! Moreover it's a NEED for a proper use of all functions of all 7.1 custom roms!
Sent from my XT1642 using Tapatalk on CyanogenMod 14.1 (dualboot)

Silesh.Nair said:
https://github.com/sileshn/android_frameworks_base/commit/70e87cfd06759768d451a8057522faba3922e415
2g issue, i'll take a look. Maybe some change from me botched it.
Is 2g working on other roms or is it a problem only on CyanMOD?
Click to expand...
Click to collapse
I'm Only Use Cm14.1 , Not Try other roms

smitharro said:
Well then you supposed wrong! Moreover it's a NEED for a proper use of all functions of all 7.1 custom roms!
Click to expand...
Click to collapse
You are right, but I install everything as it should be and even when I restart the device not to the sign of the sim card.I'll try again and see if it's some mistake I made.

Xiaomi Mi Pad 2 has been EoL'd

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link:
https://xiaomi.eu/community/threads/7-9-14.41552/
Latest version for Mi Pad 2 can be downloaded from here https://www.androidfilehost.com/?w=files&flid=213123 (MIUI 9) for global* version or from MIUI http://en.miui.com/download-296.html (MIUI 8) for Chinese version.
*Mi pad 2 doesn't really have global version, .EU version comes with pre-installed google services and removed Chinese bloatware.
This is a bad news for Mi Pad 2 owners because they do not have any solid custom ROM support for their device, which is due to lack of propitiatory Intel Atom's source code. So even if developers tried hard to deliver custom ROM they simply cannot. So unlike Mi Pad 1 even if Xiaomi EoL'd the support in a similar way last week, they can still get custom ROMs and patch support as long as developers delivers them. But for Mi Pad 2 it is simply not possible.

Yes, we do. Thanks to livedten and multirom.me. I'm getting tired of redirecting people (https://multirom.me/read.php?tid=445&fid=54).
Livedten has done very well with his MIRU Mod. I suggest everyone who owns a Mi Pad 2 to flash the MIUI firmware and MIRU mod from Multirom.me
The reason why Xiaomi.eu has dropped support for Mi tablets can be found here "Sorry guys, we have no more free time to take care of tablets and debug them.. " (https://xiaomi.eu/community/threads/is-the-mi-pad-3-is-still-being-updated.41551/#post-386099).
Furthermore, if you paid attention to what @tank0412 wrote, you would know that Lenovo has a Nougat update scheduled and that opens the door for Android N development for the Atom series. Lastly, if you really want Mi Pad 2 development, I suggest you donate a Mi Pad 2 to @KonstaT over at Modaco (http://www.modaco.com/forums/forum/445-other-devices/) - he's the brain behind all Atom custom rom development.

Palm Trees said:
Yes, we do. Thanks to livedten and multirom.me. I'm getting tired of redirecting people (https://multirom.me/read.php?tid=445&fid=54).
Livedten has done very well with his MIRU Mod. I suggest everyone who owns a Mi Pad 2 to flash the MIUI firmware and MIRU mod from Multirom.me.
Click to expand...
Click to collapse
Dose it support OTA updates? Or has repo where I can download latest version of the ROM? I don't understand Russian language. Sorry.
And MIUI.com has also suspended maintaining Latte device.

udaan said:
Dose it support OTA updates? Or has repo where I can download latest version of the ROM? I don't understand Russian language. Sorry.
And MIUI.com has also suspended maintaining Latte device.
Click to expand...
Click to collapse
If you understand how to use a translator, you'll navigate just fine. Follow the instructions in the link provided.
Just like Xiaomi.eu, OTA updates aren't supported, but I never had a dirty flash gone sour from neither Xiaomi.eu or Multirom.me. That is, of course, if you follow the instructions properly. Meaning firmware version must match MIRU Mod version in order for both to work. Livedten hasn't updated MIRU Mod since 3/9-2017, so currently the two don't match. I'm sure it'll only be a matter of time before the two are aligned again and we can enjoy MIUI 9 development on Mi Pad 2.
Please provide an official link stating that MIUI 9 development has been suspended. Either way, I'm very satisfied with the performance of my Mi Pad 2 using MIRU mod. Though I am curious to see, if Lenovo releases an Android N update as scheduled and if that could potentially help spark the development of custom roms and sort some of the current issues

Palm Trees said:
If you understand how to use a translator, you'll navigate just fine. Follow the instructions in the link provided.
Just like Xiaomi.eu, OTA updates aren't supported, but I never had a dirty flash gone sour from neither Xiaomi.eu or Multirom.me. That is, of course, if you follow the instructions properly. Meaning firmware version must match MIRU Mod version in order for both to work. Livedten hasn't updated MIRU Mod since 3/9-2017, so currently the two don't match. I'm sure it'll only be a matter of time before the two are aligned again and we can enjoy MIUI 9 development on Mi Pad 2.
Please provide an official link stating that MIUI 9 development has been suspended. Either way, I'm very satisfied with the performance of my Mi Pad 2 using MIRU mod. Though I am curious to see, if Lenovo releases an Android N update as scheduled and if that could potentially help spark the development of custom roms and sort some of the current issues
Click to expand...
Click to collapse
.EU rom is far better than Chinese ROM. I haven't tried Russian roms because I cannot read it and google doesn't do justice on translation. I got to the yandex link, but there are so many stuffs in there. Like what do I install? If you look at the OP, I have linked the latest link for .EU ROM, which Is what I am using now. It surely is faster than MIUI 8. But sadly it has been EoL'd as you can see. They are not going to maintain it any longer.
And officially they have said MIUI 9 will be last MIUI update for MiPad2, somewhere. Cant find link, look it for yourself.

udaan said:
.EU rom is far better than Chinese ROM. I haven't tried Russian roms because I cannot read it and google doesn't do justice on translation. I got to the yandex link, but there are so many stuffs in there. Like what do I install? If you look at the OP, I have linked the latest link for .EU ROM, which Is what I am using now. It surely is faster than MIUI 8. But sadly it has been EoL'd as you can see. They are not going to maintain it any longer.
And officially they have said MIUI 9 will be last MIUI update for MiPad2, somewhere. Cant find link, look it for yourself.
Click to expand...
Click to collapse
I asked you for a link, because I couldn't find any information confirming Xiaomi will stop releasing more updates for Mi Pad 2. Spreading fake news is never good. Mi Pad 2 hasn't been EOL'd. Only by Xiaomi.eu, but not by others.
Livedten actually points out that it doesn't matter if you use Xiaomi.eu, Multirom.me, etc. MIRU mod should be compatible with all of them.
multirom_MIPAD2_7.9.14_v5.1_b10.zip can be found here https://multirom.me/index.php?m=app&a=view&id=11&app=roms
A MIRU Mod version that matches 7.9.14_v5.1_b10 hasn't been uploaded, so you'll have to install MIRU Mod.

Palm Trees said:
A MIRU Mod version that matches 7.9.14_v5.1_b10 hasn't been uploaded, so you'll have to install MIRU Mod.
Click to expand...
Click to collapse
Speaking of which, Livedten released the next MIRU Mod a few hours ago
https://yadi.sk/d/TMSj0qARzAWVp

Palm Trees said:
Speaking of which, Livedten released the next MIRU Mod a few hours ago
https://yadi.sk/d/TMSj0qARzAWVp
Click to expand...
Click to collapse
So do I just flash it over to MIUI9?

udaan said:
So do I just flash it over to MIUI9?
Click to expand...
Click to collapse
Make a backup first. Just in case. As can be read in the 'ИЗМЕНЕНИЯ_MIRU_universal.docx' document
"Mod (and its idea) is completely reassembled, should work on any firmware , multirom . me , xiaomi . eu , miui . su , en . miui . com ... and so on. in any case, the key operating time is on the firmware from the multirom . me ." This excerpt was translated using Google Translate.

Palm Trees said:
Make a backup first. Just in case. As can be read in the 'ИЗМЕНЕНИЯ_MIRU_universal.docx' document
"Mod (and its idea) is completely reassembled, should work on any firmware , multirom . me , xiaomi . eu , miui . su , en . miui . com ... and so on. in any case, the key operating time is on the firmware from the multirom . me ." This excerpt was translated using Google Translate.
Click to expand...
Click to collapse
btw, will they release the full ROM in future like .EU folks?

udaan said:
btw, will they release the full ROM in future like .EU folks?
Click to expand...
Click to collapse
Probably, yeah. But beware, you might have to download the firmware zip many times, if you decide to use the MIUI 9 firmware from multirom.me, always run 'test archive' with e.g. 7zip. If no errors show, you're ready to flash, if errors show, you have to re-download. I think it's because of a server issue. I use Ninja Download Manager to succesfully download the .zip. MIRU mod downloads perfectly, since it's hosted elsewhere.

After a few tests I managed to flash MIUI9 with MIRU Mod. You must flash both multirom_MIPAD2_7.9.14_v5.1_b10.zip + MIRU_mod_16.09.2017_для_MIPAD2_UNIVERSAL.zip at the same time in order to get it to work.

https://androidfilehost.com/?fid=817550096634797955

is there any working download link for the latest multirom and miru mod package?
cant find it anywhere anymore.
i found a yandex folder "MIUI_9_BACKUP" containing:
MI_mod_08.02.2018_для_MIPAD2_UNIVERSAL.zip with 144.2MB
MIRU_mod_16.09.2017_для_MIPAD2_UNIVERSAL.zip with 336.2MB
But without any instructions or anything and dont know what to do with it

So... I had the Mi pad 2 laying in my house running on MIUI 9 and one day I got curious and tried to unlock its bootloader.
I didn't remember my password and the recovery phone no. is discontinued now. and I couldn't change it or sign out.
So like an idiot, I factory reset it. And now it's asking for a password for the last mi id.
can anyone help me? Will and edl flash do the work?
THANKS

FRD-L04 Oreo update, here we go.!

Finally, FRD-L04 Oreo (Android 8) firmware has just appeared in FF and we are going to get EMUI 8 (Oreo) soon after testing it by Honor team and giving the approval.
A roll back package has also appeared.
I guess we will be getting it in a month time.
What do you think..?
Change log:
EMUI 8.0 not only brings you the latest version of Android (8.0), it's also boosted with a lot of great features and improvements to make your device more intuitive, faster and safer. We highly recommend updating now.
[Highlights]
● Smarter
A new floating Navigation dock lets you perform frequently-used operations from anywhere on the screen. Newly added home screen shortcuts let you quickly access the app features you use most frequently. Simply touch and hold an app icon to display a shortcut menu.
● Faster
AI-based optimizations deliver greater stability, fluidity, and speed. The system boots faster, videos are more fluid, and images thumbnails load rapidly even in huge volumes.
● Safer
Enjoy enhanced protection for your system and data with new updates to system security.
[Find out more]
● Smart tips recommend you faster and smarter ways to operate your phone, appearing in specific usage scenarios and responding to your usage habits.
● Contacts and Email now let you sync the career details of your LinkedIn contacts.
● Settings has been redesigned for clearer and more intuitive organization.
● Gallery now features a recycle bin that retains deleted photos for up to 30 days. Accidentally deleted photos can be restored with a single touch.
● Phone Manager has been simplified to make managing your device easier. Standard cleanups are faster and deep cleanups more thorough.
● Your device can now connect to two different Bluetooth devices at the same time, such as a band and a car.
Important:
1. Automatic time zone uses location information to set a time zone when Location information is enabled.
2. Due to the redesign of Settings, the location of certification logos, legal information, and regulatory information (if applicable) has been altered.
3. To improve your experience, Smart notifications will be updated when you are connected to Wi-Fi. You can disable auto-updates in Settings.
4. Your device may automatically download and install updates from your carrier and device manufacturer (may use mobile data) after the update. This feature is enabled by default. You may disable it in Settings > System > Developer options.
Update notes:
1. You are advised to back up data before the update. After the update, certain pre-installed third-party apps on Android 7.0 may be uninstalled. They will still be available in App Store.
2. Some third-party apps that are not compatible with Android 8.0 may function incorrectly after the update. It is recommended that you update these apps to their latest versions in the Google Play Store.
3. This system version can be rolled back to the official version of EMUI 5.0 in Phone Manager. Rolling back the system version will erase your personal data. For more information, please contact the customer service hotline.
4. If you encounter any problems during the update, please contact the customer service hotline or visit an authorized Huawei service center for assistance which you can find.
5. Your home screen layout may be rearranged slightly.
Nitrowarez.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my FRD-L04 using Tapatalk

It'll be quicker than a month. And honor USA doesn't test anything, there is actually only a small team that represents them. Chris being the head guy there and whom I talk to on a semi regular basis.

agraceful said:
It'll be quicker than a month. And honor USA doesn't test anything, there is actually only a small team that represents them. Chris being the head guy there and whom I talk to on a semi regular basis.
Click to expand...
Click to collapse
Do you mind asking him if they'll fix the gyroscope issue with this next update? Snapchat for example spins like crazy when trying to display AR features.

xsacter said:
Do you mind asking him if they'll fix the gyroscope issue with this next update? Snapchat for example spins like crazy when trying to display AR features.
Click to expand...
Click to collapse
That was actually supposed to be a patch in B396 which the team skipped. Hopefully they've integrated that patch into the oreo firmware.
Sent from my Honor 8 using XDA Labs

ayush rao said:
That was actually supposed to be a patch in B396 which the team skipped. Hopefully they've integrated that patch into the oreo firmware.
Click to expand...
Click to collapse
Yeah I know, that's why I wasn't happy with the B397 update. Let's hope it gets fixed because the EU variants had an update that fixed the issue so I was really looking forward for the issue to be fixed here.

xsacter said:
Yeah I know, that's why I wasn't happy with the B397 update. Let's hope it gets fixed because the EU variants had an update that fixed the issue so I was really looking forward for the issue to be fixed here.
Click to expand...
Click to collapse
Well atleast we're getting the oreo update! After seeing the EU firmwares on FF I started really worrying if the L04 model would receive the update. Phew!
Sent from my Honor 8 using XDA Labs

xsacter said:
Do you mind asking him if they'll fix the gyroscope issue with this next update? Snapchat for example spins like crazy when trying to display AR features.
Click to expand...
Click to collapse
Well for the Indian variant, the gyroscope issue was resolved in the July patch. NOW IT works Perfectly!

aadithya00 said:
Well for the Indian variant, the gyroscope issue was resolved in the July patch. NOW IT works Perfectly!
Click to expand...
Click to collapse
Yeah ik, but for us they skipped B396 and went straight to B397 from B395. I felt that the B396 does have the fix for that issue but even then we still haven't gotten that.

That's amazing thank you!
Iv'e been waiting for this thread to happen! lol
after many variants got oreo I started to worry

For someone with a rooted and unlocked phone, what would be the steps to flash this new update without losing the Unlock? Because I think it happened last time I tried it.

matmat07 said:
For someone with a rooted and unlocked phone, what would be the steps to flash this new update without losing the Unlock? Because I think it happened last time I tried it.
Click to expand...
Click to collapse
Either using HuRupdater or the 'Flashing Unapproved FW guide'. Both will work.

hackslash said:
Either using HuRupdater or the 'Flashing Unapproved FW guide'. Both will work.
Click to expand...
Click to collapse
The Locking detection seems promising, thanks!

Incase Anyone Needs Help With Updating Ur Device While Rooted And Keeping Recovery And Bootloader Unlocked
With HurUpdater You Can Update Ur Device While Ur Rooted Without Losing Data And Bootloader Unlocks. This Keeps Ur Bootloader Unlocked But Updatea Ur Device.
Follow The Steps There, Download Latest Full OTA In Firmware Finder Make Sure It Is Approved. I Dont Wanna Risk You Bricking Ur Device With Oreo
Make A Folder, Name It Anything.
1. Put The Latest HurUpdater There
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
2. Put The Update.zip In That Folder, You Dont Have To Rename That
3. Rename The Update Data Full File To "update_data_public.zip"
4. Rename The File That Has A Model Number To "update_all_hw.zip"
5. Download This, This TWRP (this TWRP Is For Android 7!!
https://www.google.com/amp/s/forum.xda-developers.com/honor-8/development/twrp-t3566563/amp/
6. Rename That TWRP File "recovery.img".
Once Ur Done It Should Look Like This Image.
7. Make A Backup In Twrp Incase
8. Go to twrp and flash Hurupdater 0.3 And Now Wait
9. Once Finish Boot Back To EMUI
It Should Look Like This Image
This Kept My Bootloader Unlocked And Recovery And Data Stay But Updated Me Too

Don't I need TWRP 3.2? I'm currently stuck trying to update to it

matmat07 said:
Don't I need TWRP 3.2? I'm currently stuck trying to update to it
Click to expand...
Click to collapse
Well Just Use A TWRP That Works On Ur Device

Any feedback on the Oreo update yet?

el_venga said:
Any feedback on the Oreo update yet?
Click to expand...
Click to collapse
On oreo with my FRD-L09C432 The speed is a little better but not too much for, the color of the ui is different too.

More Pictures of EMUI 8 On My Honor 8 In Android 8

The best part of oreo: you can finally hide the navigation bar completely and with a simple swipe up it shows up again.

skyrush7 said:
The best part of oreo: you can finally hide the navigation bar completely and with a simple swipe up it shows up again.
Click to expand...
Click to collapse
Well, its a little different, you have to press a button to make the nav bar go down.

realme X2 Pro: Join realme UI Open Beta [re-post from the official forums]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey realme fans,
realme UI has grown rapidly since its development. Our developing team has invested a lot of efforts. And now it’s time to share it with you.
Open beta is going live!
Before you participate in the open beta, please read this thread carefully to ensure your open beta experience goes well.
Please read and complete the corresponding steps carefully to get started with your open beta journey:
Process
1. Read the "Reminder" and "Open Beta Plan" in this thread (Understanding risks and plans)
2. Read "Attention & Instructions" and "Common issues" in this thread (Understanding update methods)
3. Follow the "Attention & Instructions" to set your phones before updating (e.g update to the latest version & back up data etc.)
4. Download and install application APK to apply for open beta
5. Read and agree to “Must-Knows” and “Privacy Policy” after installing the APK, follow every step properly according to the guideline.
6. Apply to join the open beta, upgrade to realme UI open beta version
7. Start your realme UI open beta journey
Reminder
There are two main purposes for the open beta:
1. Let our fans experience new realme UI features in advance;
2. Collect feedback to help us find and fix possible problems. Also, collect useful suggestions to make realme UI better.
Please note that as the open beta version is still under development, there may be some unknown risk & issues.
For example, some applications (including third-party applications) may be unstable or incompatible, affecting your experience.
Therefore, please consider carefully whether to join the open beta in advance.
At the same time, taking into account user experience and compatibility issues, open beta activities may also be suspended for a period of time.
In addition, before you upgrade the open beta version, be sure to back up important data on your phone in advance.
Attention & Instructions
1.To-do list before updating
(1) Before updating the open beta version, please back up your mobile phone's important data and confirm that the backup is complete and successful.
(2) Before updating the open beta version, please make sure that the current version of your mobile phone is on required version
realme X2 Pro- RMX1931EX_11_A.10
(To check the version number: Settings> About phone> Version).
If your phone is currently not on the required software version, please update to latest version first.
Please note, if the phone version is not as given above, after the application APK is installed, your phone will not be able to receive neither the open beta version upgrade nor normal version upgrade.
If such cases happen, the user needs to cancel the public beta application in order to regain the normal version upgrade.
(3) There may have some third-party application versions that aren’t compatible with Android 10. Therefore, it is recommended to update all your applications to the latest version in Play Store before updating the open beta version.
(4) Please ensure that the your phone storage is more than 5GB. Otherwise there will be a risk of update failure. (To check storage space method: Settings> Additional Settings> Storage).
(5) Please make sure your phone is not ROOTED.
(6) Application APK is not compatible between different models. Please install the application APK strictly according to the model i.e. realme X2 Pro only.
Feedback & Suggestions
(1) If you encounter any bug when using the beta software, please go to Bug Report board on Community to submit a report. Here is the link:
https://c.realme.com/in/bug-report
(If it is about Camera app and photo-taking, please remember to attach a sample photo for developers to understand the issue)
About roll-out
(1) We don’t provide roll-out method in this open beta.
(2) You can exit the open beta form the application APK, which allows users to exit the open beta before downloading the OTA of open beta version.
(3) After downloading the OTA of open beta, or after upgrading to the open beta version, users will not be able to roll-out.
Common issues
1. After the upgrade, it may take a longer time to boot for the first time, if there are too many third-party applications on your phone.
2. After upgrade, in order to improve the system operation efficiency and eliminate potential safety risks, the system will perform a series of actions such as application adaptation, background optimization and security scanning. so, the system will occupy more CPU, memory and other resources, which may cause slight hang and fast power consumption. We suggest that you can leave it for 5 hours after the phone is fully charged or use the mobile phone for 3 days normally, then, your device will get back to normal. If you still have any issue, please feel free to contact us, thank you.
3. In the realme X2 Pro open beta version, there is abnormal calculation of system launcher in Power Usage. The battery actually consumed by system launcher is lower than what is shown in Power Usage. This is caused by wrong calculation of the system, but the actual battery usage remains normal and not affected. This issue will be solved in the official version.
How to join open beta/ Guidelines
1. Download the Zip files provided below. Extract and you will find two APK files.
2. Install both the APK files.
3. Go to Settings> Software Update> Click the top right button> Enter Trial Version Upgrade, and choose the open beta for realme X2 Pro. As shown in image below.
Download the application APK
*For users already on early access, there is no need to join open beta (and no need to install the apk), please wait for the official version.

There Is no link or apk?

I will attach them as soon as they are made available in the official forums

Thanks I found this but don't work for me !

From what I read, when we apply to beta we can't get back to normal OTA without wipe the phone ?

soldatino69 said:
Thanks I found this somethings but don't work for me !
Click to expand...
Click to collapse
That ZIP could be for the RealMe 5 PRO or the 3 PRO, please remove it so we can attach the correct one for X2 PRO when is made available on realme forums

P1f said:
That ZIP could be for the RealMe 5 PRO or the 3 PRO, please remove it so we can attach the correct one for X2 PRO when is made available on realme forums
Click to expand...
Click to collapse
Do it! Was for China version I think

Done
Change your region to india. Got to software update >trail version and apply for beta version.
Use vpn and connect from India got to software update..
Thank me later

elkloppiko said:
Change your region to india. Got to software update >trail version and apply for beta version.
Use vpn and connect from India got to software update..
Thank me later
Click to expand...
Click to collapse
Maybe it works on China version but not on eu. In updates there is not" trial version.....

elkloppiko said:
Change your region to india. Got to software update >trail version and apply for beta version.
Use vpn and connect from India got to software update..
Thank me later
Click to expand...
Click to collapse
Does not work on my global version
Sent from my Realme RMX1931 using XDA Labs

Did you change your region to India at first?? From language and region

SebTech33 said:
Does not work on my global version
Click to expand...
Click to collapse
On mine too

I joined beta tester from OTA app and got instant update

Nothing also for me! Try several APN and factory reset but nothing

Not working
I've installed both apks and I'm on A.10, but updater don't shows me the option to update from the beta test

Update first post with the ZIP containing the 2 APK files from the official forums, an also with the picture showing where the update can be found after installation.
Beware that it seems this is not working for all people

Thanks. Its work for chinese variant

P1f said:
Update first post with the ZIP containing the 2 APK files from the official forums, an also with the picture showing where the update can be found after installation.
Beware that it seems this is not working for all people
Click to expand...
Click to collapse
It doesn't seem, it works for few people, and it is not so difficult to see an option, if you have it there.

No updates

elkloppiko said:
Change your region to india. Got to software update >trail version and apply for beta version.
Use vpn and connect from India got to software update..
Thank me later
Click to expand...
Click to collapse
my issue is I DONT KNOW why i don't have REGION settings under LANGUAGE & REGION... only Language i can change...
Official A.10 firmware... still LOCKED never unlocked... from A.06-A.08-A.09-A.10 roadmap firmware upgrade... 1931Ex.A.10 currently from realme europe support...
can you help why?