Hi,
Bought the Meizu MX4 Pro recently. But upon first switch on, i got the screen showing: battery < 20%, cannot proceed with upgrade.
Now, once the battery was charged, i got the recovery screen to update and clean (With Flyme Logo), or to restart. Upon choosing restart, it stuck on the Flyme logo rotating...
I have downloaded the Flyme OS (5A, 4.5.7A, 4.5.7.1A, 4.5.7I) and placed it in the recovery drive of the mobile when connecting to a pc... but each and everytime, the screen shows checking firmware, then Firmware corrupt sign appears...
Thanks to point me in right direction... or what steps i need to follow to restore the mobile...
Thanks,
Jinen
Related
Hello everyone!
My brother sent me is MX 030. It is the original Meizu MX HK version with the unlocked bootloader. Two weeks ago, he found his phone had crashed. The screen was black and he powering it off and then back on would not do anything (black screen - only vibrates on power on).
I got it today and first thing I did (after charging it-the charging mode works and displays a battery logo) was boot into recovery mode (or update mode on Meizu phones) and I was able to reach the menu. It let me mount the drive onto my PC. I downloaded the latest firmware and put it on the drive. I pressed upgrade and cleared data. The software seemed to install fine, but then the phone rebooted to a black screen - again.
Then I tried installing older versions which I found on the meizu website. They all install and I can see the recovery mode is different, but they all boot into black unresponsive mode (which drains the battery).
Having had other android devices before, I feel the phone is stuck in reboot loop.. I don't know what else to try or attempt. I feel am running out of options. The fact that the phone still responds to some commands and allows me to flash firmware should indicate that the phone isn't brain dead quite yet, right? Anyone else experienced a similar situation?
Thank you,
Oli
Hi,
I have a Note 4 t-mobile that is "brick" right now. and I hope if anyone offer assistance.
It is running Android 6. Ever since the last upgrade the phone would freeze and reboot on its own. I fixed that problem by installing Wake Lock. After that it would still experience sluggish at time but the phone is still very much usable.
Lately, after watching a bit of streaming video the phone would slow down so much that a reboot is needed. But yesterday my last reboot turned my phone into a brick. After that reboot the phone rebooted itself to the download mode. So I took the battery out, waited for a few minutes and put the battery back in and started the phone. Instead of booting normally the phone displayed the message including "set warranty bit: recovery" and then followed by the flashing TWRP splash screen. By "flashing TWRP splash screen" I mean the TWRP splash screen ( with the TEAMWIN logo) would be shown on the screen for a second, then the screen black out for a couple of seconds, then the splash screen is back on for a second, and the screen black out for a couple of seconds, etc, and never successfully boot into TWRP recovery. I had left the flashing splash screen overnight and nothing changed. Connect the phone to my pc via usb and fastboot wouldn't recognize my phone when phone was flashing the TWRP splash screen. So I tried to flash TWRP again by starting my phone in download mode "volume down + power". When I connected my phone to my pc Odin recognized my phone. But when I tried to flash a custom recovery (TWRP or CWM) it seems the download started but never finished (on the phone I could see the progress bar started but never progress further).
Any suggestions would be greatly appreciated1
Additonal info
I just wanted to add that my phone is still running the stock ROM.
Problem solved
Problem solved. Once I used a different cable and the download process actually worked and I was able to flash stock ROM using Odin.
I have a Nokia 6 Model TA-1033
In the middle of an OS update the phone seems to have bricked itself. When I power on the device it gets stuck on the powered by android screen and goes no further. Even with phone plugged into a charger no recharging icon is shown.
When I go into recover mode and select factor reset I get an error message "failed to find a device for partition system"
Is the phone bricked or is there some way to flash a new stock rom?
Many thanks
Is there a ROM I can put on the SD card and then install from card via the boot loader. I have been searching from a file to download but cant find anything for a TA-1033.
Many thanks
Pete917 said:
I have a Nokia 6 Model TA-1033
In the middle of an OS update the phone seems to have bricked itself. When I power on the device it gets stuck on the powered by android screen and goes no further. Even with phone plugged into a charger no recharging icon is shown.
When I go into recover mode and select factor reset I get an error message "failed to find a device for partition system"
Is the phone bricked or is there some way to flash a new stock rom?
Many thanks
Click to expand...
Click to collapse
Did it happen while installing april patch ?
Sent from my Nokia 7.1 using XDA Labs
Yes it happended wit the last OTA update.
Now when I beet it goes to the powered by android screen, but when I try to get it into bootloader the android bot flashes on screen then dissapears.
I have been using my Zenfone 2 Laser (Z00L) for quite a while now. Recently, it just froze up and doesn't respond even when I press the power button for a long time. So I decided to just take out the battery to restart it. But now it only goes up to the Asus logo then restarts again.
I have already tried to completely wipe everything in TWRP and have also tried to flash a new ROM. Right now, the ROM I have installed is AospExtended ROM v6.7 and I was able to get into the home screen while the phone is connected to a charger, but immediately restarts and goes to the boot loop when I unplugged.
I hope you can give me some advice on what I should do.
Same thing happened to me. Dont know how to recover the device. If you find any fix kindly post that here.
Hi
I'm facing a problem with my tablet. It shut down after official update and gets a bootloop. I'm not able to get into recovery mode beacuse when I press power+vol up it gets stuck on Lenovo logo. I was able to enter a fastboot mode so I decided to flash ROM. I tried official Lenovo assistant and Qfil + Many roms (stock, dumps from other users) but I always gets a bootloop. I can't turn off a tablet, because it turn on by itself and gets into bootloop until battery dead. What is a cause? How to fix it?
Update: I leave it plugged in to PC via USB cable and after many bootloops my PC shows tablet as a hard drive (I was shocked). Then tablet shows animated Lenovo screen, then Lenovo screen with Snapdragon and finally on screen I saw menu with language selection. My joy was short, because right after choosing language I get a information: Battery temperature is to low. Charging has been stoped" Then tablet shut down again and goes to many bootloops until it will turn on again with the same information. Is this a battery problem?