Database Users

How can I just root and not unlock

Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting

gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
you will need to unlock to flash custom zip, but u can relock after

gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
Question - why? What do you want to root your phone for if not to use the wonderful tools of root. Why do you think fully rooting your phone will harm something. Locked or unlocked bootloader is not going to affect your phone. Rooted stock rom with recovery will not make it act funny.... Sorry not putting you out there but just asking why? Feel free to ignore me if you must...
Edit: Sorry to answer your question like the post above said you can root and then lock it right back up if that is your preference

playya said:
Question - why? What do you want to root your phone for if not to use the wonderful tools of root. Why do you think fully rooting your phone will harm something. Locked or unlocked bootloader is not going to affect your phone. Rooted stock rom with recovery will not make it act funny.... Sorry not putting you out there but just asking why? Feel free to ignore me if you must...
Edit: Sorry to answer your question like the post above said you can root and then lock it right back up if that is your preference
Click to expand...
Click to collapse
I have come from an HTC Desire, which I rooted and had a custom rom (Cyganonmod) on and was very happy with it.
I am still not sure of what I would gain by doing the same with my Nexus 4 ?
any advice is much appreciated.
Is this new Cyganonmod installer the best way to go?

gjjh25 said:
I have come from an HTC Desire, which I rooted and had a custom rom (Cyganonmod) on and was very happy with it.
I am still not sure of what I would gain by doing the same with my Nexus 4 ?
any advice is much appreciated.
Is this new Cyganonmod installer the best way to go?
Click to expand...
Click to collapse
This phone is built for rooting and modding. You wont know what benefit you have until you either read up and see if the mods are ones you want or actually flash a rom. Sure try the CM installer but if you dont toolkits or just basic knowledge of android can get this phone roooted in minutes.
the CM rom on your HTC will give you the same benefits on your Nexus 4

playya said:
This phone is built for rooting and modding. You wont know what benefit you have until you either read up and see if the mods are ones you want or actually flash a rom. Sure try the CM installer but if you dont toolkits or just basic knowledge of android can get this phone roooted in minutes.
the CM rom on your HTC will give you the same benefits on your Nexus 4
Click to expand...
Click to collapse
Thanks, what do you recommend for the easiest way to unlock and root then?

gjjh25 said:
Thanks, what do you recommend for the easiest way to unlock and root then?
Click to expand...
Click to collapse
I used a toolkit but honestly you can unlock manually by just booting into bootloader mode. Go into development and try Wugs Toolkit.... Rooting the phone is easy and all methods are relatively the same.
I do not see anything wrong with giving CM a try as well

gjjh25 said:
Is it possible to just root my phone?
if so how do i do it?
All the posts I have seen go into unlocking and then rooting
Click to expand...
Click to collapse
I recommend you to stick to your original plan, its your phone, do what you like, you don't need to flash custom roms if you don't want to. I am using stock kernel and stock KitKat right now and the performance is excellent.
Follow these instructions to unlock bootloader, install latest kitkat factory image, install custom TWRP recovery, and root. http://forum.xda-developers.com/showthread.php?t=2010312
The links to fastboot package and driver required is in my signature.
Link to download factory image: https://developers.google.com/android/nexus/images
Link for latest TWRP: TWRP recovery
Link for latest SuperSU package: SuperSU package
After you do all that, in bootloader menu, you can flash back the stock recovery (recovery.img), which is location in the "image-occam-******.zip" of the factory image. (fastboot flash recovery recovery.img)
Then lock your bootloader by "fastboot oem lock". You can also use BootUnlocker to lock and unlock your bootloader on the fly while in the phone, without losing your data, since everytime you do fastboot oem unlock, it will wipe the entire device.
By using stock rom, stock recovery, stock kernel and temporarily unroot (SuperSU) or hide root (SuperSU paid version), it allows you to receive future OTA updates from Google. If you want to modify your phones more while staying with stock, read up on Xposed Framework and its module Gravity Box, which is not yet compatible with Android 4.4 but will be eventually.
Just remember if you don't have custom recovery, once something goes wrong and your phone can't boot, its very hard to save the data inside. Once you have custom recovery like TWRP, you can make a backup of your stock image (which also backup your stock kernel) and try out other custom roms and easily go back to stock, then you can flash stock recovery again to receive OTA updates.

Thanks for advice everyone.
I rooted and unlocked with Wugfresh over the weekend. A lot easier than I thought it would be

So how does OTA work?

As a long time Android power user, I rooted my Nexus as soon as I got the phone. However, I completely forgot about the best thing Nexus devices have to offer, OTA updates.
I completely ditched OTA before since I was on custom ROMs most of the time on other devices.
So here are the questions.
1) How will modifying the system partition affect OTAs? Will they still show up and I won't be able to install them?
2) How can I get OTA back and working? Does a simple "fastboot flash system/boot system.img/boot.img" with the stock system and boot partition fix the issue? If not, what do I do? And will it involve data wiping?
3) If I don't do those, I can still do a manual update for the system partition using fastboot, correct?
Note: I rooted the device using the Nexus Toolkit method over at the dev sub.
Sent from my Nexus 6P using XDA Forums

341464 said:
As a long time Android power user, I rooted my Nexus as soon as I got the phone. However, I completely forgot about the best thing Nexus devices have to offer, OTA updates.
I completely ditched OTA before since I was on custom ROMs most of the time on other devices.
So here are the questions.
1) How will modifying the system partition affect OTAs? Will they still show up and I won't be able to install them?
2) How can I get OTA back and working? Does a simple "fastboot flash system/boot system.img/boot.img" with the stock system and boot partition fix the issue? If not, what do I do? And will it involve data wiping?
3) If I don't do those, I can still do a manual update for the system partition using fastboot, correct?
Note: I rooted the device using the Nexus Toolkit method over at the dev sub.
Sent from my Nexus 6P using XDA Forums
Click to expand...
Click to collapse
1. They'll still show up, but any attempt to install them will fail.
2. See my guide.
3. Yes.

Heisenberg said:
1. They'll still show up, but any attempt to install them will fail.
2. See my guide.
3. Yes.
Click to expand...
Click to collapse
So wait, what's the status now on the latest SuperSU package? I've heard that its system-less installation now?
Sent from my Nexus 6P using XDA Forums

341464 said:
So wait, what's the status now on the latest SuperSU package? I've heard that its system-less installation now?
Sent from my Nexus 6P using XDA Forums
Click to expand...
Click to collapse
There are two versions, the traditional version, and the systemless version.

Heisenberg said:
There are two versions, the traditional version, and the systemless version.
Click to expand...
Click to collapse
Speaking of OTA and systemless. I have opted for the systemless root method. If I want to install an OTA, all I have to do is flash the stock boot image, install update, then re root correct? Assuming there are no changes to system?
Sent from my Nexus 6P using Tapatalk

[GUIDE] [OSPREY] [MM] 【6.0/6.0.1】Install TWRP, Root and Xposed successfully on 6.0

[GUIDE] [OSPREY] [MM] 【6.0/6.0.1】Install TWRP, Root and Xposed successfully on 6.0
1) Unlock your bootloader . for complete unlocking process go here.
https://m.youtube.com/watch?v=sw675ipX-ds&feature=youtu.be
IT WILL RESET ALL YOUR DATA.
2) Turn on USB debugging on
3) Boot your device into bootloader mode
4) flash TWRP recovery v2.8.7 r5. http://forum.xda-developers.com/devdb/project/?id=11051#downloads
5) Boot into TWRP recovery
6) Flash supersu zip v2.62-3. http://download.chainfire.eu/751/SuperSU/BETA-SuperSU-v2.62-3-20151211162651.zip
7) After succsesfull flashing wipe cache/dalvik cache . reboot system. If it asks to install Root. DO NOT INSTALL ROOT AT THIS STAGE.
8) wait till Boot finishes.
9) If you want to install Xposed Boot into TWRP recovery.
10) Flash Xposed installer xposed-v79-sdk23-arm.zip. http://forum.xda-developers.com/showthread.php?t=3034811.
Thanks for contributors of TWRP, Supersu and Xposed.

I am G-Root...ed
Thanks man!, being trying a lot with no succes... till now... Excelent Work :good:

abhijeetc9762 said:
1) Turn on USB ) .
Click to expand...
Click to collapse
do we have twrp for moto g turbo?

The phone has to have the bootloader unlocked?
The whole thing will completely reset the device?

abhijeetc9762 said:
3) flash TWRP recovery v2.8.7 r5.
Click to expand...
Click to collapse
Will this work without flashing TWRP? Can I just boot TWRP using fastboot, then flash SuperSU 2.62-3 and reboot? In that way, after reboot it will be system recovery and as SuperSU 2.62-3 is a systemless root, there won't be any modification in /system. Thus, I can receive OTA updates in future directly.
Did anybody try this with XT1550?

soumyajit_nayak said:
Will this work without flashing TWRP? Can I just boot TWRP using fastboot, then flash SuperSU 2.62-3 and reboot? In that way, after reboot it will be system recovery and as SuperSU 2.62-3 is a systemless root, there won't be any modification in /system. Thus, I can receive OTA updates in future directly.
Did anybody try this with XT1550?
Click to expand...
Click to collapse
You don't have chance anyway after rooting. You have to have Flash the firmware again to receive OTA
Sent from my MotoG3 using XDA Premium 4 mobile app

soumyajit_nayak said:
Will this work without flashing TWRP? Can I just boot TWRP using fastboot, then flash SuperSU 2.62-3 and reboot? In that way, after reboot it will be system recovery and as SuperSU 2.62-3 is a systemless root, there won't be any modification in /system. Thus, I can receive OTA updates in future directly.
Did anybody try this with XT1550?
Click to expand...
Click to collapse
Yes, you can do it that way, I've done it several times. Like someone said though, it's simpler to just flash TWRP and be done with it rather than wait for OTA's that you probably can't flash anyway.

Tel864 said:
Yes, you can do it that way, I've done it several times. Like someone said though, it's simpler to just flash TWRP and be done with it rather than wait for OTA's that you probably can't flash anyway.
Click to expand...
Click to collapse
In an earlier post you indicated that you can simply do a full unroot with SuperSU and receive OTA updates. Did that only apply to 5.1.1 and not 6.0?
Tel864 said:
I was able to d/l the update, but had to unroot to install the update. If you're using SuperSU to root, it's a simple matter to use the SuperSU app and do a full unroot, then just root again after the update.
Click to expand...
Click to collapse

Kakaroth89 said:
The phone has to have the bootloader unlocked?
The whole thing will completely reset the device?
Click to expand...
Click to collapse
Same question. Coming from a Nexus 4 phone, it was necessary to unlock the bootloader first. According to the instructions here, that is unnecessary?
EDIT (01-20-2016): Thanks for adding the missing unlock bootloader step to the instructions. I just ordered a Moto G yesterday.

pjc123 said:
Same question. Coming from a Nexus phone, it was necessary to unlock the bootloader first. According to the instructions here, that is unnecessary?
Click to expand...
Click to collapse
To root you will need an unlocked bootloader.

Any one?
Rooted xt1550 with supersu 2.62 and then deleted moto bloatware, now phone stuck on black screen after rebooting. Any help abt deleting bloatware?

Seems fine..but
just done this and boot up looks normal but seems forever to boot up. It has not boot up yet, what is the estimated time to wait?

Does it matter if TWRP is configured as "Read Only" or not?

Tel864 said:
To root you will need an unlocked bootloader.
Click to expand...
Click to collapse
And this procedure will do a factory reset?
I mean all the procedure, not just unlocking the bootloader

Kakaroth89 said:
And this procedure will do a factory reset?
I mean all the procedure, not just unlocking the bootloader
Click to expand...
Click to collapse
No, all your data and apps will still be there.

Tel864 said:
No, all your data and apps will still be there.
Click to expand...
Click to collapse
I lost all apps and data when I unlocked bootloader.. I did not unlock until after the 6.0 upgrade.

MrTooPhone said:
Does it matter if TWRP is configured as "Read Only" or not?
Click to expand...
Click to collapse
Do no tick as read only.
Sent from my MotoG3 using XDA Premium 4 mobile app

OP updated for bootloader unlocking procedure
Sent from my MotoG3 using XDA Premium 4 mobile app

abhijeetc9762 said:
5) Boot into TWRP recovery
Click to expand...
Click to collapse
@abhijeetc Excellent instructions. One recommendation is to address the issue with the "read only" TWRP option. I am sometimes presented with this option during TWRP boot (not sure why this option is not presented every time since I never check "don't show again"). I am not sure if "read only" makes a difference or not. But I can confirm I was soft bricked after enabling read only and flashing 2.66. I did not wipe Dalvik/Cache either. I was successful with 2.62-3 but was not presented "read only" option either. Also, you may want to recommend a Nandroid back up prior to any attempt flashing root. Just a recommendation.

I notice under developer settings (tap Build Number a bunch of times in the "About Phone" section to access developer mode) it has the option "OEM unlocking - Allow bootloader to be unlocked" as an option. Does that make this process any easier or is it necessary? I bought my phone straight from motomaker.

Can I make use of Nougat's automatic updates and have/keep root? TWRP ver. to use?

Right now I'm on 7.0 DP5, unencrypted with root. I'm willing to enable encryption if it means I won't have to constantly manually flash the security updates and keep root. Is that what the "system-less root" technique is for? (and is it still a thing?)
Should I use the lastest TWRP 3.0.2-2 to flash N factory images? I'm guessing 3.0.2-1 bug is less serious now that there's a vendor.img available, but the last I had read from the dev team was that -2 was still untested and 3.0.2-0 was still the safest bet. I'm just not sure it's compatible with N?

EvanVanVan said:
Right now I'm on 7.0 DP5, unencrypted with root. I'm willing to enable encryption if it means I won't have to constantly manually flash the security updates and keep root. Is that what the "system-less root" technique is for? (and is it still a thing?)
Should I use the lastest TWRP 3.0.2-2 to flash N factory images? I'm guessing 3.0.2-1 bug is less serious now that there's a vendor.img available, but the last I had read from the dev team was that -2 was still untested and 3.0.2-0 was still the safest bet. I'm just not sure it's compatible with N?
Click to expand...
Click to collapse
You can't have root or custom recovery and take OTAs, but you can have an unlocked bootloader. Otherwise stock only. I am pretty sure systemless appeared when people were trying to keep using Android Pay. As for TWRP, I have had no problems using the latest, just don't restore / backup between MM and N.
Sent from my Nexus 6P using Tapatalk

ultyrunner said:
You can't have root or custom recovery and take OTAs, but you can have an unlocked bootloader. Otherwise stock only. I am pretty sure systemless appeared when people were trying to keep using Android Pay. As for TWRP, I have had no problems using the latest, just don't restore / backup between MM and N.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
If you are rooted and have TWRP installed, you can use FlashFire to install the OTA and keep root and your custom recovery.

+1 Flashfire

Cool thanks for the suggestion, I actually saw something about FlashFire this morning but haven't had a chance to look into it yet. Do I need to be encrypted for it to work? And I'm assuming it's not entirely compatible with N's update system, it still takes some interaction to flash?

EvanVanVan said:
Cool thanks for the suggestion, I actually saw something about FlashFire this morning but haven't had a chance to look into it yet. Do I need to be encrypted for it to work? And I'm assuming it's not entirely compatible with N's update system, it still takes some interaction to flash?
Click to expand...
Click to collapse
The other issue with TWRP was backing up and restoring the EFS partition, it seemed that 3.0.2-1 corrupted it on restore which would be a problem. They did have a work around. They suggested using -0 would be fine. I have -2 and did a N to N restore with no issue, but I did not restore EFS. I'm always extra careful with new versions, I tend to backup my data and backups off-phone just in case.

dratsablive said:
If you are rooted and have TWRP installed, you can use FlashFire to install the OTA and keep root and your custom recovery.
Click to expand...
Click to collapse
My situation is that my 6p is rooted , TWRP installed and with custom kernel. I have searched quite a bit and cannot make sure which is the best way to update from MM to N. My thought is that:
1. FlashFire wipe system data n cache;
2. FlashFire MM stock boot image;
3. FlashFire N ota;
4. FlashFire custome kernel; and
5. Reboot.
The above steps to be done in one sequency. Please comment n million thanks.
CK

smallvan said:
My situation is that my 6p is rooted , TWRP installed and with custom kernel. I have searched quite a bit and cannot make sure which is the best way to update from MM to N. My thought is that:
1. FlashFire wipe system data n cache;
2. FlashFire MM stock boot image;
3. FlashFire N ota;
4. FlashFire custome kernel; and
5. Reboot.
The above steps to be done in one sequency. Please comment n million thanks.
CK
Click to expand...
Click to collapse
Put this in wrong thread and want to delete it.
That's a bit too complicated. Connect your phone to a Mac. Open a terminal and
adb devices (To see if your phone is recognized. If so continue, if not fix and then continue)
fastboot flash boot boot.img
fastboot reboot bootloader
fastboot flash system.img
fastboot flash recovery stockrecovery.img
fastboot reboot
That should unroot your device.

dratsablive said:
Put this in wrong thread and want to delete it.
That's a bit too complicated. Connect your phone to a Mac. Open a terminal and
adb devices (To see if your phone is recognized. If so continue, if not fix and then continue)
fastboot flash boot boot.img
fastboot reboot bootloader
fastboot flash system.img
fastboot flash recovery stockrecovery.img
fastboot reboot
That should unroot your device.
Click to expand...
Click to collapse
Thanks. And I will have a total experience of returning my 6p back to stock boot, stock recovery n no root. What about vendor.img?

smallvan said:
Thanks. And I will have a total experience of returning my 6p back to stock boot, stock recovery n no root. What about vendor.img?
Click to expand...
Click to collapse
You don't need vendor image unless you are flashing a different boot/system from what you currently have. But it also can't hurt as long as it's the correct version.

dratsablive said:
You don't need vendor image unless you are flashing a different boot/system from what you currently have. But it also can't hurt as long as it's the correct version.
Click to expand...
Click to collapse
I believe I am looking for a suitable way to upgrade my 6p from MM to N that I have explicitly stated at my wrong thread post. This is absolutely not my intention to return my 6p back to stock of MM. And there is every reason to upgrade to N, thus, vendor.img is no doubt a must for an amateur like me.
Nevertheless, thanks for dratsablive kind suggestions.

[OTA] Marshmallow Build MCG24.251-5-5

Here is the latest OTA. Verizon says it has security (*cough* Sunshine *cough*) patches. I can confirm that it does not re-lock an unlocked bootloader. It's so minor, they just decided to slap an extra -5 on it.
https://www.androidfilehost.com/?fid=745425885120733909
Do not take this if your bootloader is locked and you'd like to unlock it at some point. If you'd like to unlock it at some point, do it now! What are you waiting for?
You cannot flash this with TWRP.

TheSt33v said:
Do not take this if your bootloader is locked and you'd like to unlock it at some point.
Click to expand...
Click to collapse
There, fixed it for you.
Gotta bold the important stuff.

ChazzMatt said:
There, fixed it for you.
Gotta bold the important stuff.
Click to expand...
Click to collapse
You're inhibiting natural selection.

TheSt33v said:
Here is the latest OTA. Verizon says it has security (*cough* Sunshine *cough*) patches. I can confirm that it does not re-lock an unlocked bootloader. It's so minor, they just decided to slap an extra -5 on it.
https://mega.nz/#!70Zh1BbS!cC_mZ8xouLVwvMlOZLKW2UyC-JXDS7SdnCjxDoafXbI
Do not take this if your bootloader is locked and you'd like to unlock it at some point. If you'd like to unlock it at some point, do it now! What are you waiting for?
You cannot flash this with TWRP.
Click to expand...
Click to collapse
hweew ... new kernel ...
could you upload it?

3Dota said:
hweew ... new kernel ...
could you upload it?
Click to expand...
Click to collapse
TWRP flashable, including kernel, version will be up shortly.

TheSt33v said:
TWRP flashable, including kernel, version will be up shortly.
Click to expand...
Click to collapse
Any modem updates?

koftheworld said:
Any modem updates?
Click to expand...
Click to collapse
Yes. Will also be included in TWRP version.

Yee!

I'm already unlocked on Stock with Stock recovery, and tried taking the OTA, but got an error when it rebooted to install
Sent from my XT1254 using Tapatalk

mustafu said:
I'm already unlocked on Stock with Stock recovery, and tried taking the OTA, but got an error when it rebooted to install
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
Have you done any modifications at all? Even in the past? For example, if you were rooted and then unrooted, if any files were left over from that process, the update will fail. If you had xposed and removed it, same deal. Even if you replaced your emoji file with an updated one, that will also cause it to fail. Did you modify build.prop? Fail.
The only way to be sure that it will pass is to reflash MCG24.251-5 with fastboot before taking the OTA. Or you could always do it the easy way and flash MCG24.251-5-5 with TWRP: https://forum.xda-developers.com/droid-turbo/general/rom-mcg24-251-5-5-100-stock-t3565795

I have a "system update paused, waiting for wi-fi" in the status bar. I don't want to take this update - can someone help me remove the notification, and block future updates? I have bl unlocked and rooted...
Tia

I'm running 24.81.5 and just received 24.91.5. Did not install. Unlocked and rooted. If I take this will it fail or cause issues?
Sent from my XT1254 using XDA-Developers Legacy app

g0ndor said:
I have a "system update paused, waiting for wi-fi" in the status bar. I don't want to take this update - can someone help me remove the notification, and block future updates? I have bl unlocked and rooted...
Tia
Click to expand...
Click to collapse
Install titanium backup and freeze the app called Motorola Update Services.

Shtiff1 said:
I'm running 24.81.5 and just received 24.91.5. Did not install. Unlocked and rooted. If I take this will it fail or cause issues?
Sent from my XT1254 using XDA-Developers Legacy app
Click to expand...
Click to collapse
It will fail. Any modifications at all (like root or TWRP, for example) will cause the update to fail.

So I'm guessing it's for "security" issues. So I really don't need to take this, because it involves to much crap... Unrooting, cleaning cache, reflashing, having to do the phone over again, etc.... If that is all true, then how can I get rid of the system update?

g0ndor said:
I have a "system update paused, waiting for wi-fi" in the status bar. I don't want to take this update - can someone help me remove the notification, and block future updates? I have bl unlocked and rooted...
Tia
Click to expand...
Click to collapse
Download "Disable Service" from the play store

TheSt33v said:
It will fail. Any modifications at all (like root or TWRP, for example) will cause the update to fail.
Click to expand...
Click to collapse
I'm not aware of any modifications, I thought I went back to all stock. Recovery says qe 1/1, is it supposed to be 0/1?
Sent from my XT1254 using Tapatalk

mustafu said:
I'm not aware of any modifications, I thought I went back to all stock. Recovery says qe 1/1, is it supposed to be 0/1?
Click to expand...
Click to collapse
If you look at the update script for the OTA, the first two thirds of it are dedicated to checking the system partition (and maybe other partitions. It's a pretty long read and I certainly haven't read all of it) for modifications. If the update is failing, that means it has detected something that does not match what it is checking for. I don't think the qe flag matters, because in the past I'm pretty sure that I've been at 1/1, and after a successful OTA it changes to 0/1.

trial TWRP or temp TWRP custom recovery
trial TWRP or temp TWRP custom recovery
TheSt33v said:
If you look at the update script for the OTA, the first two thirds of it are dedicated to checking the system partition (and maybe other partitions. It's a pretty long read and I certainly haven't read all of it) for modifications. If the update is failing, that means it has detected something that does not match what it is checking for. I don't think the qe flag matters, because in the past I'm pretty sure that I've been at 1/1, and after a successful OTA it changes to 0/1.
Click to expand...
Click to collapse
Don't know if this would help someone install an update like this, but let me throw this out there. There's a way to boot to TWRP custom recovery and use TWRP without installing TWRP. Think of it as "temporary" TWRP.
Thus, you should still be able to flash stuff, including any TWRP-flashable updates, boot logos (to replace the unlocked bootloader warning, SuperSu, etc -- and when you reboot you still have stock recovery.
Now, I don't know why anyone would want to keep stock recovery when TWRP recovery does so much more... But I just recently helped someone with the same suggestion. He wanted to install SuperSu, get root, but keep stock recovery -- for some reason.
Anyway, think of it as "trial TWRP" or "temp TWRP".
I remembered when I made factory images for my Quark, in a variety of states, I used this temporary TWRP trick. I'd almost forgotten about it!
So, seems like you could flash THIS TWRP-flashable version of this update while temporarily booting to TWRP (but not actually installing it), and it wouldn't matter if everything "checked" out or not.
Of course, if you like it, then you can always install it permanently.
For reference, here's the most recent version of TWRP for our phone. (use the one with the most recent post date. @bhb27 updates it fairly often.)
TWRP FOR QUARK
https://www.androidfilehost.com/?w=files&flid=39562
Here's my complete reply:
______
Rahuld107 said:
@ChazzMatt,
Hi, can i root xt1225 using temporary twrp ( one time method). I don't need twrp/custom recovery. Just want root with stock recovery. I am on stock marshmallow, bootloader is unlocked .
Click to expand...
Click to collapse
TEMPORARY TWRP
OK, here's another suggestion. There is a way to boot to TWRP to install SuperSu but NOT install TWRP. You will not be flashing TWRP over stock recovery. You will STILL have stock recovery when you reboot. Think of it as "temporary" TWRP.
Put the TWRP file in your ADB folder and use this command. Your phone will boot to TWRP, but it will not be permanently installed. You can then flash SuperSu while booted into the TWRP interface and then reboot back to your system.
fastboot boot file-name.img (whatever your file name of TWRP is.)
Whereas, the command to permanently install TWRP is this:
fastboot flash recovery file-name.img (whatever your file name of TWRP is.)
___
Back when I first got this phone -- now over two years ago -- I made a bunch of backups in TWRP and posted the images online in various stages -- pure stock, stock + root, stock + root + TWRP. I made the first two with the "temporary" TWRP. People could flash them and already have root without having TWRP installed.
Moto Maxx - Moto Turbo XT1225 factory images (Mexico | Puerto Rico | India | Brazil)
https://forum.xda-developers.com/moto-maxx/development/moto-maxx-moto-turbo-xt1225-factory-t3078274
1) TWRP BACKUPS which I made in various stages, such as
stock, unrooted
stock + rooted
stock + rooted + permanent TWRP
Click to expand...
Click to collapse
See? Even just stock + rooted but with no TWRP. I made that backup with a "temporary" TWRP which did not overwrite the stock recovery.
But they were only for 4.4.4 Kitkat, which came with this phone. After we went to Lollipop, I posted some more images, but just pure factory. Still, the "temporary" TWRP trick is useful.

Is it just me or the Gallery app in 6.0.1 scrolls really slow? Btw i didnt do a clean update from LP in case that could be the reason