Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
sylvisj said:
Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
Click to expand...
Click to collapse
Have you tried removing the .cid.info file ?
Using a terminal app type the following:
Code:
su
rm /data/.cid.info
On some ROM's have have to do this after every time I have rebooted the phone, not quite sure why but it works for me.
TrallaP said:
Have you tried removing the .cid.info file ?
Using a terminal app type the following:
Code:
su
rm /data/.cid.info
On some ROM's have have to do this after every time I have rebooted the phone, not quite sure why but it works for me.
Click to expand...
Click to collapse
Hello,
Thanks for the suggestion. I fired up Terminal Emulator, su'd, and it doesn't look like there is a .cid.info in /data/. There is a .psm.info, though, and .npswifi_stream - I don't know if they're related at all.
sylvisj said:
Hello,
Thanks for the suggestion. I fired up Terminal Emulator, su'd, and it doesn't look like there is a .cid.info in /data/. There is a .psm.info, though, and .npswifi_stream - I don't know if they're related at all.
Click to expand...
Click to collapse
Here's the 'ls -a' output for /data:
Code:
[email protected]:/data # ls -a
.container_1
.container_2
.container_3
.layout_version
.mtp_stream
.npswifi_stream
.pcsync_stream
.psm.info
.socket_stream
.ssh
anr
app
app-asec
app-lib
app-private
audio
backup
bcmnfc
bluetooth
cam_socket0
cam_socket1
container
dalvik-cache
data
dontpanic
drm
fota
hostapd
local
log
lost+found
media
misc
nfc
property
qcks
radio
resource-cache
security
shared
ssh
system
time
tombstones
user
wiper
wpstiles
Bump.
I have the same problem......
ninne1 said:
I have the same problem......
Click to expand...
Click to collapse
Bump again.
i think it's missing IMEI and EFS. Try this http://forum.xda-developers.com/showthread.php?t=1264021
r47z said:
i think it's missing IMEI and EFS. Try this http://forum.xda-developers.com/showthread.php?t=1264021
Click to expand...
Click to collapse
I dunno about EFS, but I know the IMEI is already correct - *#06* is showing the same IMEI as the label on the back of my phone.
My phone is work well after flashing CM, but no WIFI.
No /data/.cid.info file!
*#06# - show IMEI.
Did we ever get to the bottom of this?
Im having exactly the same problem, so bump. Its been like that for 6 months, my workaround so far was getting a bigger data subscribtion since 4g is working fine
sylvisj said:
Hello,
To start off, I have a USCellular S4 w/ CM10.1, currently the 7/9 nightly. I am running baseband version R970VXUAMDL and have not modified the kernel.
I am unable to enable WiFi at all on CM10.1 and haven't been able to since initially flashing CM10.1.
Under the Settings menu, I am unable to enable WiFi - it's greyed out.
Under the WiFi menu, I can enable the toggle but it does nothing.
Under the Advanced menu, MAC address shows 'unavailable' and the Wi-Fi region code is set to 'Europe' and will not remember changes.
Click to expand...
Click to collapse
Hi sylvis,
I realize that this is an old post. However. perhaps this thread will help someone else:
I flashed a Samsung Galaxy S4 (T-mobile SGH-M919) to CyanogenMod (CM11) this weekend. It worked ok for a couple days. The owner then said that they can't get any WI-FI. I found your post here and read with optimism that I might be able to fix this problem. Our problem was exactly "word for word" the same problem as you described in your original post. (Well almost exactly; we couldn't get "USA" to stick as the region code)
Before flashing the phone, I did install Philz ClockworkMod and did do a backup of the OEM ROM before flashing to CM11. That said, I found that I did not have to go down the road of restoring a missing IMEI file (as other threaders here describe). Here's what worked for me:
I dialed *#06# on the phone to see if there was an IMEI number present, and there was. I wrote down that number. So I decide to see if that number matched the printed number on the phone, that we can find under the battery.
Before I do a power off of the phone, I recall that I had turned OFF both Bluetooth and Mobile Networks. WI-FI was still turned ON, but in it's non-functional "greyed out" state like you and I both experienced.
Now I power off the phone, take off the back cover, and take out the battery to have a look at the printed IMEI number. Yes, it does march the number that I saw via *#06#.
I had to get up to do something, then returned a couple minutes later. I popped in the battery and restarted the phone. To my utter surprise, WI-FI was back up! In "Advanced" I now see the MAC address and the region is locked on USA
I turn on Mobile Networks, and WI-FI's still working. Being the fool that I am, I have to test this further. So I power off the phone again and just let it sit there for a couple minutes. I power back on and there is still JOY. Problem resolved and happy customer.
In closing: I don't think that the removal and reinsertion of the battery was the total solution, because the owner had already tried that. However, the owner did not let the phone sit with the battery removed for very long. They just popped it out, waited a couple seconds, then popped it back in. I think the total solution was having WI-FI enabled, Bluetooth and Mobile disabled, then doing a power off, with an extended wait time before reinserting the battery.
Hope that helps.
Regards,
Brcobrem
Exclusive MODDED ROM EQS-v2.0M
CS968 a RK3188 ChipSet Based TVBoX
AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]
THIS VERSION HAS NATIVE 1080P KERNEL, NOT SAME AS V1.
IMPORTANT INFORMATION:
WE JUST LEARNED THERE ARE A FEW CS968/TV01/CR11s MODELS equipped with different WIFI/BT MODULES.
Thanks to dFenix we figured this out. [More info]
THIS ROM IS FOR AP6210 WIFI CHIP bundled devices, MAINBOARD VERSION 2.
So if you try this rom on other models you may loose your wifi connection.
Click to expand...
Click to collapse
IMPORTANT NOTICE:
THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK.
NOTE : LIBMEDIA.SO REPLACED, READ BELOW...
Factory Date : 09-12-2013 from CloudNET based CR11/s
Modification Date: 21-12-2013
NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
You may harm your device, if you flash this firmware to 5 mpx camera version.
LCD Display density has been set to 240, if you need smaller icons and texts you can easily change by using preinstalled DPI changer program (May need root permission after first start).
Features:
Rooted [ You may notice a bit difference than v1 version, but it is normal ]
Build tweaks
TCP Tweaks (Buffering etc...)
Networking Tweaks
Wifi Tweaks (Signal etc...)
Multimedia Tweaks
Streaming Tweaks
HW Video Acceleration by default
Spoofed as Galaxy S3
Date format set to European
Timezone Europe GMT +1
Renewed bootanimation
Renewed wallpaper
Add: SuperSU.apk (Updated)
Add: LuckyPatcher (Updated)
Add: RootBrowser (NEW)
Add: OGYoutube with downloader [ Original YouTube still can be apartly installed ]
Add: Dolphin Browser 10.1.2
Add: Android Weather
Add: JetAudio
Add: Blueput Droid (NEW)
Add: Texdroider DPI (NEW)
Add: BSPlayer FREE (NEW)
Add: Cifs Manager (NEW)
Add: ESFile Explorer (NEW)
Add: Patched Libmedia.so (Many thanks hillyu from FreakTab, More info)
Updated : AddAway (Update)
Removed : All of useless chinese media stuff
Removed : Chrome
Removed : Search Box
Removed : Google Stuff (Search, maps, gmail, talk)
Removed : Email
Removed : XBMC Installer (Not everyone's taste)
Removed : A few more crap...
Exclusive test modules : Tun, Cifs*, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal.
Included CIFS MANAGER can do it for you, you don't need to install from terminal.
Exlusive bootanimation (Renewed)
Good working Remote Control.
Faster Internet browsing, smoother streaming, Very nice playing 1080p media from NAS DRIVE
*: It seems cifs module won't work properly, it is interesting because it was allright with K-R42 device but I'll search for it.
v2.0M CHANGES
NEW*: MultiWindow
*Needs Xposed Framework to be installed completely.
NEW*: Xposed Framework Installer
*Installation must be done via program self, then after reboot you may download modules as much as you want
REPLACED : BSPLAYER-> MX PLAYER FREE - No Codec pre-installed
REMOVED : JETAUDIO
UPDATE : LUCKY PATCHER, ADAWAY
UPDATE : DOLPHIN BROWSER 10.2.1
Re-Add : RKVideo player, RKExplorer
A few fixes that causes problems.
More optimized video playback (about 40 mbps mkv from network drive), more stable system.
LCD Density set to : 160 (Smaller icons and texts by default)
A little bit faster than 2.0 version.
Feel free to test or build new one, no words for future updates or versions etc.
FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.
AnTuTu Results
Devhost / Mirror
password : cs968eqs
Firmware flashing guide.
[ HD QUALITY BOOT ANIMATIONS... ]http://forum.xda-developers.com/showthread.php?t=2612221
hi
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
fakotibor said:
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
Click to expand...
Click to collapse
Hi,
Yeah, it seems not much users have CS968 here in XDA but, I'm a member of XDA-Dev and I share what I have here, but you may share this thread on freaktab as yours if you wish.
I have no account on FreakTab and I don't think I may able to manage this thread on multiple forums.
So, I can answer questions only here and also publish updates of my rom.
Thanks for your interest.
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
resansid said:
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
Click to expand...
Click to collapse
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I've uploaded another Mirror-link working well.http://www.filedropper.com/showdownload.php/cs968051213eqsv2m
EQUANCY said:
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I'll make more mirrors soon.
Click to expand...
Click to collapse
OK This worked. Thanks.
resansid said:
OK This worked. Thanks.
Click to expand...
Click to collapse
Your welcome. :good:
Or you may try from here too.
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
hanu_blr said:
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
Click to expand...
Click to collapse
Yes,
Multi-window not working, but some features of Gravitybox well.
Actually I've put Multi-window by mistake, it was a bit late when I saw
However you may remove this app by following steps below.
1- Deactivate Multi-window app in Xposed modules menu (uncheck)
2- Reboot
3- Open RootBrowser and go to System/app directory
4- Long press on multi_window.apk and select Delete
I didn't tested all of modules and most of them are not working properly because of Tablet UI, I'll remove both application in next firmware mod.
Sorry for inconvenience, thanks for understanding.
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
daviddema said:
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
Click to expand...
Click to collapse
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
NFS help needed
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
PsychicSaint said:
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
Click to expand...
Click to collapse
It is very little bit slower than v1.1 but its not really noticable on 2D applications, can you specify what have you experienced actually?
I'm using a NTFS formatted NAS drive with no problem, even watching MKV files about 40-50 mbps rate. (NetGear ReadyNAS).
All of thoose modules have been supplied but not loaded by default need manually installed or you must add lines to the init.rc from system.
This can't be automatically because Kernel needs to be modified and I don't want to do that.
NFS module is actual module for RK3188.
If you more specify problem may be I can look it for you.
And for your consideration...
Some issues are FIRMWARE RELATED, because these firmwares aren't fully optimized, just generic RK3xxx roms.
Not good drivers at all...
And not all manyfacturers optimizes their own firmwares.
Produce and forget policy.
EQUANCY said:
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
Click to expand...
Click to collapse
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
daviddema said:
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
Click to expand...
Click to collapse
You've done very well my friend, please let us know if you get an answer from them.
EQUANCY said:
You've done very well my friend, please let us know if you get an answer from them.
Click to expand...
Click to collapse
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
daviddema said:
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
Click to expand...
Click to collapse
Wifi Display part of firmware self, I didn't add by myself and yes it is not working properly, I've read at somewhere this application supports only Nexus devices but I'm not sure.
hanu_blr said:
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
Click to expand...
Click to collapse
Disabling sound input?
As much as I know, the only sound input is internal microphone.
I real don't know the other sound inputs and als no clue about disabling it.
If you mean sound output such as Analog, Optical and HDMI then may be there is option but for input, I have no idea.
Sorry.
Uninstall Apps
How can I unistall app like bsplayer?
Thanks
Hi,
Open RootBrowser (usually opens in main directory) if not then got to Main Directory first then next to
\System\App
And long press the application which you want to remove and select Delete.
Or download a root uninstaller from market then uninstall what you want.
Hope this helps.
Hi,
Dear All,
Ok, the problem is very famous i.e. i factory reset my device and when powered one like a fresh piece, i cannot add google account on my G900F (can't establish a reliable connection to the server).
i have searched a lot over the internet. Read about the HOSTS files description as well. All i found was the modification of the "etc/hosts" with the clients.google.... following "#" so that 127.0.0.1 localhost is only the operational entity.
My device is un-rooted and just for the confirmation of the above mentioned, i opened the hosts file via HTML Viewer (just readonly) and found that the etc/hosts file on my S5 has 127.0.0.1 localhost only and no any other information, which i think should be available for your device to work normal and google accounts can be added. See attached screenshot.
Need your kind help in resolving my issue please.
Try clearing caches from recovery
Still same issue...
Might be worth factory resetting again
How did you access the HOSTS files without being rooted?
did the factory reset 3 times but nothing, issue stands unresolved.
i opened the HOSTS file through RARLAB. Actually it allows you to view the root folder and all of its contents even if your phone is un-rooted.
Could try removing the device from Google Play
https://support.google.com/googleplay/answer/2407656?hl=en-GB
Create a new Google account as a test to see if the issue is the phone or the account
If that doesn't help, Id flash a stock ROM through ODIN, this will NOT trip KNOX if you are still 0x0
Are you sure all your data connections are working properly, WiFi/3/4G ?
*Detection* said:
Could try removing the device from Google Play
https://support.google.com/googleplay/answer/2407656?hl=en-GB
Create a new Google account as a test to see if the issue is the phone or the account
If that doesn't help, Id flash a stock ROM through ODIN, this will NOT trip KNOX if you are still 0x0
Are you sure all your data connections are working properly, WiFi/3/4G ?
Click to expand...
Click to collapse
ok here are some interesting occurrences:
Worth mentioning that i was operating over Wi-Fi.
1) - i flashed a stock Kitkat ANG2 ROM via odin and the problem still persists.
2) - Then i flashed stock Lollipop BOB7 and still the same.
3) - Then i created a new account via the first sign in page on the phone (after flashing the new ROM), and i was able make a new account(through my phone) but still it was unable to login on the phone.
4) - Then i installed a Proxy/VPN betternet and then i was able add an account successfully and also Play store is working fine.
5) - Means there is some issue with my wi-fi adapter routing (may be inside the phone or the carrier) etc.
6) - Then i switched off the wi-fi and enabled LTE (of my SIM card provider) and connected my phone through it, say what! its working fine.
7) - again i tried over the wi-fi and the issue started to happen again
Well, one important thing, i am using wi-fi which is also a LTE carrier (having the google issues) and the second LTE (which worked fine) is by the SIM card operator.
So , is there any problem with my wi-fi (inside the phone) or may be with the operator from which i am getting my services??
its quite confusing at the moment. well i am going to try the whole thing over the Wi-Fi of another operator and will feedback the results.
Mean while any suggestions ??
Reboot the router you are connected to WiFi from?
Doesn't sound like the phones fault, unless you have a proxy enabled in WiFI settings or something, sounds like the issue is with your ISP/Router