Database Users

[Q] MT3G 1.2 -the process android.process.acore has stopped unexpectedly at startup

Hi,
I have a tmobile mytouch 3g 1.2 (3.5mm jack phone). I tried to root my phone and it failed during the SYSTEM---UnZipping process. (it stuck there forever). I then looked at options of unrooting it. When I apply SAPPIMG.zip it says Main Version Older! Update Fail!
Then I reboot the phone in recovery mode (tried to reset to factory settings and then reboot). The phone gives me the below error upon startup. The only thing i can see is an notification bar.
the process android.process.acore has stopped unexpectedly. "FORCE CLOSE"
Please can someone help me how to get my phone working? Appreciate all your help!

If you go to tmobile.com then go to there forum under android development you will see a topic called how to unroot the mytouch. In that topic they have a link for the original sappimg .. download to your zip cars in the root of the card (no folders) then just boot into hboot and apply the sappimg. I have done it many times so I know it works. Then when you go to root your just us the universal androot method. Feel few to pm me i
ent from my HTC Magic using XDA App

Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)

I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.

mumilover said:
Type this in fastboot:
Code:
fastboot getvar version-main
Then we can try to see if we can update it.
If not, you can always try to flash RUU.
The system starts, that's a good thing -> you have adb access!
Just don't go around and flash all kind of sapphire.nbh/zip...
Wait intil you have the right info :0)
Click to expand...
Click to collapse
I tried the command - fastboot getvar version-main
it just says < waiting for device > and then nothing happens...
also when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...) can this number be used in any manner for anything

housry23 said:
I have had this problem and solved it. I would either get this acore stopped working error or just a loop in the boot screen. I think what caused this is there is not enough internal room for the ROM and gapps. Make sure you wipe everything. Do you have a nandroid backup? Can you get into recovery? Which recovery do you have installed? Do this, make a goldcard. Use fastboot to reroot the phone because you may have halfway unrooted it and made root useless. Boot into recovery and wipe. Install from sd any MyTouch ROM without Gapps. This should get you into the OS and now you can use other methods of getting your phone back. When I got here I used nandroid backup to get my phone back to a date it was when it worked and have had no problems since.
Click to expand...
Click to collapse
i did not take any nandroid backup ...i got into revovery boot...but whn i did the wipe clean option and reboot i get this error.
to make a gold card i would need to have the USB debugging enabled right? I am not able to go past the error screen (Home does not work, settings does not work )
and when i run the adb devices command, it does not display my devices. (But i have the number noted down when i tried to root the phone which failed...)
is there any other way to enable the USB Debugging as I am not able to open settings or even see anything on my phone...?
Would there be any option that's something like doing a System Restore to an earlier date on Windows OS on the computer?
please let me know the next steps...appreciate all of your help...

It's driver related.
Fix the drivers and try again to run the commands.

mumilover said:
It's driver related.
Fix the drivers and try again to run the commands.
Click to expand...
Click to collapse
You mean re-install the USB drivers for mytouch 3g? i tried that but still nothing happens...

Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...

mumilover said:
Well you have to...
In fastboot mode this command shall give you the device nr .
Code:
fastboot devices
If not, the drivers are still bad!
You could also try to do a HARD RESET from hboot ( volume - together with power)...
Click to expand...
Click to collapse
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?

ganesh.raj.ms said:
Thanks for the steps. I got the version details.
by executing the fastboot getvar version-main in fastboot mode.
version-main: 2.53.707.2
finished. total time: 0.001s
What will be the next steps...how to I update?
Click to expand...
Click to collapse
Hey, i tried the below. can you please let me know if this is correct? and what do i do next?
userdebug-img-14721_1.zip
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
archive does not contain 'system.sig'
--------------------------------------------
Bootloader Version...: 1.33.0013
Baseband Version.....: 2.22.23.02
Serial Number........: HT03TPB01582
--------------------------------------------
checking product... FAILED
Device product is 'sapphire'.
Update requires 'trout'.
finished. total time: 0.042s
how do i try to rectify the checking product...FAILED???

OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...

mumilover said:
OK....
Let's get the facts right.
You tried to root with wrong guide.
The sapphire.zip/nbh image you used if for the 32A.
How do i know that ?
Well the main version nr tells me that you have flashed this:
2.53.707.2 SEA WWE test-signed (from this page: http://forum.xda-developers.com/showthread.php?t=659403)
That's why you have troubles!
The solution....
I need all your fastboot info.. ALL.
Then i can figure out what to do. Or else i will work in the dark...
Click to expand...
Click to collapse
Is it the below that you want?
[FONT=&quot]SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
Oct 21 2009,22:33:27[/FONT]

Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices

mumilover said:
Yes...
You have the right radio/spl combo. That's good.
The problem is that your main version is set to high.
If you try to flash any RUU for the 1.2 magic, you will get main-version older error...
Even if you use a goldcard.
Do you still have access to adb?
Even for a little... then we can flash a custom recovery and get the system back.
Even if your system don't start up... as long you can boot more then 20 sec and you don't get reboots.
If not, then we have to flash a 32A sappimg.zip using a goldcard.
From there we flash custom recovery. Then eng spl. Then flash system,boot, userdata. Then flash the 1.2 spl... Then we are done :0)
So it's a long one... but first test if we have adb access.
Code:
adb devices
Click to expand...
Click to collapse
adb devices does not give me anything...its not working

Does the computer recognise the device?
Maybe it's driver related...
PS: check your pm

1.76.0010 S-ON boot and 3.22.20.17 Fastboot working stuck in Ruu usb scr

My device is a HTC MAGIC 32A, the phone cid is HTC__038
Hey I had flashed Rogers RUU 2.1 update over a rom with old radio and old spl
The update failed and I had to take out the battery
Now my phone only opens in the ruu white screen where its written SAPPHIRE 32A SHIP S-ON
HBOOT- 1.76.0010 s-on H
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
And there is a chip with a cross at the bottom
I have fastboot acces but have tried almost all the known commands but to no avail
TRIED FASTBOOT FLASH RECOVERY XXXX... but gives signature fail
fastboot flash zip rom.zip gives main version older in case of official roms and signature error even in extracted roms
fastboot boot recovery xxxx... nothing happens just after the cmd shows booting
tried fastboot erase recovery/system /booot all of them give remote not allow
I have tried to run other official ruu(all of these found here forum.xda-developers.com/showthread.php?t=659403 ) with goldcard butr all of them give error 140 bootloader version error and show main version older on phone screen
I have tried to run the official rogers 2.1 ruu again but it gives error 132- signature error
When running ruu the current device image shows version 3.54.631.7
Tried everything in this thread http://forum.xda-developers.com/showthread.php?t=793704&page=5
and this one
http://forum.xda-developers.com/showthread.php?t=824633
PLEASE HELP ME!!
Either a signed rom(hex edited) with image version greater than 3.54 or a way to get adb working or turn s-on to s-off through fastboot would do the trick

Or simply if somebody could tell me how to revive a phone with S-ON with rom version 3.54 using FASTBOOT Thanks

If you are getting an error main version older with goldcard, then it is not a goldcard. If you can get another goldcard, or still have the numbers to get another goldcard image and remake your goldcard it will work. I have been in the same position and remade the goldcard and it worked. I don't know why or if it happens all the time or with just certain brands, the goldcard no longer works after using it. I don't have a Kiingston only a Samsung microSD and have had to remake it twice. I would get the remote:not allow when trying to flash or boot recovery from fastboot, but when I remade my goldcard it worked.

housry23 said:
If you are getting an error main version older with goldcard, then it is not a goldcard. If you can get another goldcard, or still have the numbers to get another goldcard image and remake your goldcard it will work. I have been in the same position and remade the goldcard and it worked. I don't know why or if it happens all the time or with just certain brands, the goldcard no longer works after using it. I don't have a Kiingston only a Samsung microSD and have had to remake it twice. I would get the remote:not allow when trying to flash or boot recovery from fastboot, but when I remade my goldcard it worked.
Click to expand...
Click to collapse
Hey I dont have a spare phone to check the above, but with the current goldcard I have I am able to pass the CID check with any rom(otherwise get cust id error) but am not able to get past the Main version check so will making a goldcard again help

hEY MY CURRENT ROM VERSION IS 3.54 AND THE OTHER RUU'S AVAILABLE HAVE MAX UPTO 3.05 AND I AM UNABLE TO DOWNGRADE EVEN WITH A PROPER GOLD CARD. PLEASE HELP!!

i have same problem, did you fixed?

primux said:
i have same problem, did you fixed?
Click to expand...
Click to collapse
Almost, got access to adb with su priveleges but by mistake flashed wrong flash_image file and ruined it, now my phone is lying with HTC care who are thieves and say the "Phone is EXITING while we are trying to update your software" then they call me and say that that they will have to change my motherboard despite my hardware being completely fine(I think they have taken out all my original parts and initially say my warranty has expired, then do something that makes my phone not even boot and then say i have warranty, just hope they give back my phone soon ) ..
My advice would be to try the below else perform JTAG as HTC care are greedy, unprofessional, illiterate cheats.
Type fastboot oem boot or fastboot boot oem while in fastboot and your phone will boot and keep restarting every 2 min
Good Luck

i see, can you tell me how you got adb access? i just have RUU MODE and when i tried to upload a new flash stuck in SYSTEM - unzipping, my phone it's same version as yours. i'll appreciate any help

[help needed]HTC magic PVT 32A: wrong radio (3.22.XX) and SPL (1.76.0008)

The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!

htchd2sg said:
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
Click to expand...
Click to collapse
Many of this was answered, search the forum.
Here is the thing you have wrong spl radio combination,you have perfected spl. You can do a fastboot boot xxxxxx.img and enter recovery. Then you must flash eng spl 1.33.2010.And you will be unbricked

Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.

htchd2sg said:
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
Click to expand...
Click to collapse
You cant boot that recovery try the one hero recovery Ra-magic1.6.2H smthing recovery

I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)

htchd2sg said:
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
Click to expand...
Click to collapse
Hmm did you try the sappimg.nbh to restore your magic???

Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!

Can anyone help on this? really get frustrated

htchd2sg said:
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Click to expand...
Click to collapse
You need to create a goldcard www.theunlockr.com at How to's and then use sappimg.nbh

I got gold card already. . Thank you!

Do you solve this? I got the exactly problem with you =(

I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App

r3v4N said:
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What a bad news =( I had sent this phone to repair, but all of their experts cannot fix as well.

That's lame.... did you try the unroot process?
Sent from my SGH-T959 using XDA App

You could try unbricking by flashing the Rogers or Brazilian Android 2.1 RUU. The main version is newer and a goldcard should make it work.
Please make sure your battery is full and that you have a PROPER GOLDCARD!!! Otherwise this will most likely fail.
I've uploaded the sappimg to http://www.multiupload.com/WO0S35S53S
Rename it to sappimg.zip, copy it to the root of your SD card and boot into fastboot (vol-down and power). That SHOULD fix your phone. Then again, it could also brick it even worse, but what do you have left to lose?

After loaded sappimg, it checking sappimg, then went back to HBOOT. Nothing happened. I've tried to recreate my gold card, no luck with it =(

need original desire hd rom

hello i need the original rom but i need it to install from bootloader i cant open my phone its stucks on htc logo and on restore or factory its gone in clockworkmod.how i can restored all by default bootloader and rom?

Run a RUU
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!

UPDATE:
Working solution found in this post:
http://forum.xda-developers.com/showpost.php?p=30379379&postcount=30
glykas said:
hello i need the original rom but i need it to install from bootloader i cant open my phone its stucks on htc logo and on restore or factory its gone in clockworkmod.how i can restored all by default bootloader and rom?
Click to expand...
Click to collapse
Download the RUU corresponding to your phone's region from the following link:
http://www.filefactory.com/f/efa28fefafc4af9c/
Run the RUU on your PC with your DHD connected via USB.
This will restore your DHD to default.

xbiggyl said:
Download the RUU corresponding to your phone's region from the following link:
http://www.filefactory.com/f/efa28fefafc4af9c/
Run the RUU on your PC with your DHD connected via USB.
This will restore your DHD to default.
Click to expand...
Click to collapse
you know what is from eu greece?before i have a 2.3.5.it is unlocked for all network by default.

GuyInTheCorner said:
Run a RUU
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!
Click to expand...
Click to collapse
i dont want to install a custom case i need from warranty to restore as default.but thanks.

glykas said:
i dont want to install a custom case i need from warranty to restore as default.but thanks.
Click to expand...
Click to collapse
RUU is a full return to stock. Stock recovery, stock ROM, remove Super CID & S-ON
Sent from my Desire HD with BlackIce.
Thanks don't hurt ya know?!

i try with that firmware RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed
i boot in bootloader on hboot and say low battery 30%
i try from fastboot and say update from 3.13.0.0 to 3.12.405.1 go next and want for delete and sending,signature update and say error [140]

Recharge your phone to more than 50% and then try again.
Before you run the RUU you have downloaded, go into bootloader mode.
In case you have damaged your bootloader and cannot access CWM, you will have to push the PD98IMG using fastboot.
Sent from my HTC One X using Tapatalk

the S-ON is on and my battery is 100% but say again that.can fault the custom rom to i try before to install?i have a backup with my dhd files md5
restore with no extension but i dont know how i can restore.im noob..

I'm not sure if I understood you correctly. Did you make a nandroid backup? Also, are able to enter recovery mode?
If you can access clockworkmod and have already madea nandroid backup all you have to do is restore it from your sdcard usin CWM.
Let me know if I understood u correctly.
Sent from my HTC One X using Tapatalk 2

xbiggyl said:
I'm not sure if I understood you correctly. Did you make a nandroid backup? Also, are able to enter recovery mode?
If you can access clockworkmod and have already madea nandroid backup all you have to do is restore it from your sdcard usin CWM.
Let me know if I understood u correctly.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
now i cant when i go factory or restore its gone on htc logo and stuck.my baterry is full and say again 30% cant do anything. :/ my bootloader is unlocked but s-on.what i can do? :/

only i can open is bootloader hboot or fastboot restore and factory reset not work.the ruu not work RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed in hboot say low battery and fastboot error when installing.

i reinstall the clockworkmod i install the http://themikmik.com/showthread.php...F-SAID!!!-4-0-4-Sense-3-6&p=218030#post218030 and again stuck on htc white logo..i put it on sd and install from clockworkmod install zip from sdcard and choose zip from sdcard select install yes.and on install all yes full wipe but on restart stuck

glykas said:
i reinstall the clockworkmod i install the http://themikmik.com/showthread.php...F-SAID!!!-4-0-4-Sense-3-6&p=218030#post218030 and again stuck on htc white logo..i put it on sd and install from clockworkmod install zip from sdcard and choose zip from sdcard select install yes.and on install all yes full wipe but on restart stuck
Click to expand...
Click to collapse
You should not install FullWipe AFTER you flash the ROM.
Flash FullWipe first, THEN flash the ROM.
Try it and let me know.

xbiggyl said:
You should not install FullWipe AFTER you flash the ROM.
Flash FullWipe first, THEN flash the ROM.
Try it and let me know.
Click to expand...
Click to collapse
i do it but nothing change can fault my hboot case it is 2.00.0029 and another and before it is 2.00.0027 or not?radio is 26.10.04.28_M
i find why not work custom im not s-off and i cant s-off case phone not open into android.can s-off in bootloader?
ACE PVT SHIP S-ON RL
HBOOT-2.00.0029
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Dec 22 2011

i try that
plug the phone in fastboot, you should see fastboot usb in red.
Open a cmd as admin or terminal as root in the pc
type: fastboot oem rebootRUU (you will get a black splash with silver htc)
fastboot flash zip "nameoffile.zip" (no quation marks)
Once it is done (it says OKAY. finished in the CMD session)
fastboot reboot
C:\android-sdk-windows\platform-tools>fastboot flash zip PD98IMG1.zip
sending 'zip' (293949 KB)...
OKAY [ 48.251s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) checking main version...
FAILED (remote: 43 main version check fail)
finished. total time: 102.855s
ihave that file from DHD if that can help to say me what i do with that
http://www.mediafire.com/download.php?842svi6net2lui6

You need to downgrade first!! I can see from your logs that you haven't done so.
Follow the following guide STEP BY STEP! Don't skip anything!
http://driphter.com/3867/guide-downgrade-root-radio-eng-s-off-dhdinspire-4g-in-9-steps/
This is going to solve it for you..
Good Luck

xbiggyl said:
You need to downgrade first!! I can see from your logs that you haven't done so.
Follow the following guide STEP BY STEP! Don't skip anything!
http://driphter.com/3867/guide-downgrade-root-radio-eng-s-off-dhdinspire-4g-in-9-steps/
This is going to solve it for you..
Good Luck
Click to expand...
Click to collapse
i cant do that step it is first.my phone is not booting up to do anything..only i can do is on bootloader,clockworkmob and my pc.
http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/

ok i try to install RUU_ACE_SENSE30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed from sd i put it and i rename it PD98IMG.zip reboot in hboot check the firmware and say main version is older! update fail! press <POWER> to reboot.
any help?what i can do?i thing that is is the fault hboot 2.00.0029
but i dont know how to downgrade it case the plone not boot stuck on boot logo white htc

Now I understand, follow this guide:
http://forum.xda-developers.com/showthread.php?t=1396253
Let me know what happens..
Good Luck
Sent from my HTC One X using Tapatalk 2

Htc 820 stuck at logo

Hiii Everyone....
Some day ago i unlocked my boot-locker then i format my system after that i installed kitkat TWRP Recovery but phone restart continuously.
please help me what will i do.
my mobile is htc 820 dual sim Indian variant please me properly and step by step method.
my mobile fastboot status is given below:-
********Unlocked*****
A51_DTUL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010.U10305041_08.01.51015
OS-3.17.720.3
eMMC-BOOT 2048MB
APR 11 2016,21:16:51.0
What will i do next please help me.
thanx in andvance:laugh::good:

How do you FORMAT your system? Did you mean you wiped it?
Or did you just "FORMATTED" the system by flashing TWRP. If it is so, you have flashed the wrong version of TWRP! Your bootloader state that your OS version is 3.xx, that means your device should originally on Marshmallow. In this case, if you flashed the Kitkat version of TWRP. The system may not be bootable due to the incompetable of recovery.
You may try the following method to see if it works for you:
http://forum.xda-developers.com/desire-820/general/solved-solution-software-update-option-t3269290

yes bro