Related
Hello friends.
I installed Xposed (http://forum.xda-developers.com/showthread.php?t=1574401) and now my shiny new S4 won't boot (stuck at Samsung logo).
According to the docs, I need only copy /system/bin/app_process.orig back to /system/bin/app_process but alas I cannot because my stock recovery is not letting me adb shell, reporting the device is offline. Note that adb devices shows the device as connected but offline.
Since there's no working TWRP or CWM (yet!!) I think I'm stuck.
If someone else can unlock me in the mean time. I'll buy you a beer or TWENTY. That's a promise.
Don't know whether it still works, but other SS phones have a save mode boot.
To enter it, you have to power off your phone first. Next, turn it on while holding the menu button and keep menu pressed until you see your homescreen.
hope it works.
Thanks for the reply! Nope. Tried the home button and the menu button. No cigar.
can you enter download mode?
Try and find something like the nexus root tool kit.....maybe there is one like it for Galaxy phones.
Its a great tool for such a thing, it helps you root, un root, lock, unlock, flash and re flash stock, it aslo lets you pick if phone is working as normal or is it soft bricked., and thats what saved my nexus 7 and 10 lol was stuck with bootloops and not able to get into recovery mode.
Anyway have a look see if there is something like that but for Samsung Galaxy.
Have a look at this, used it to flash s3 in the past, unsure what it can do s4 way though. http://forum.xda-developers.com/showthread.php?t=1703488
Thanks for replies.
Yes! I can get into download mode.
There is an S4 toolkit but it's early days and apparently doesn't actually work. I figure with time, a custom recovery will emerge and that will save the day. I'm sure I don't need to explain that I would like this fixed NOW without waiting tho!
bonstio said:
Hello friends.
I installed Xposed (http://forum.xda-developers.com/showthread.php?t=1574401) and now my shiny new S4 won't boot (stuck at Samsung logo).
According to the docs, I need only copy /system/bin/app_process.orig back to /system/bin/app_process but alas I cannot because my stock recovery is not letting me adb shell, reporting the device is offline. Note that adb devices shows the device as connected but offline.
Since there's no working TWRP or CWM (yet!!) I think I'm stuck.
If someone else can unlock me in the mean time. I'll buy you a beer or TWENTY. That's a promise.
Click to expand...
Click to collapse
Download firmware for Odin from Samsung-Updates or use Pre-Rooted OFFICIAL Rom from here
Turn OFF your phone, press&hold POWER+HOME+VOL_DOWN to enter Odin/Download Mode.
Connect your phone to the computer, use Odin3 v3.04 , load firmware as PDA, make sure that ONLY AutoReboot&F.Reset Time is ticked and click START.
After 5 minutes, all done, it should be back to life...
enjoY
Just flash a Official stock firmware and you will boot normally again.
Download a stock firmware
Download odin
Enter download mode in you unit by pressing power and volume down and home button.
Connect the device to your pc, wait for drivers to install.
Select your unzipped firmware (yeah the .md5 file) in the PDA section
Now start flashing and wait...your phone should boot as normal.
That is about it
no donation required btw...
download mode is great news. now get odin + stock firmware and flash your s4 back to life be aware, that all your data is most likely to be lost in the process.
a small price to pay if you ask me.
As others said, if you can get to download mode then be ready to have babies and fall in love with Odin, another life saver.
voodoochild2008 said:
As others said, if you can get to download mode then be ready to have babies and fall in love with Odin, another life saver.
Click to expand...
Click to collapse
Thanks guys. On the download. Server seems slow. Great to know that it's recoverable. I'll update when I'm up and running again.
djembey said:
Download firmware for Odin from Samsung-Updates or use Pre-Rooted OFFICIAL Rom from here
Turn OFF your phone, press&hold POWER+HOME+VOL_DOWN to enter Odin/Download Mode.
Connect your phone to the computer, use Odin3 v3.04 , load firmware as PDA, make sure that ONLY AutoReboot&F.Reset Time is ticked and click START.
After 5 minutes, all done, it should be back to life...
enjoY
Click to expand...
Click to collapse
SORTED. Thanks to everyone for jumping on board! djembey, mail me your PayPal for your reward or alternatively a shipping address and what color your S4 is. Which ever you prefer.
Thanks again.
bonstio said:
SORTED. Thanks to everyone for jumping on board! djembey, mail me your PayPal for your reward or alternatively a shipping address and what color your S4 is. Which ever you prefer.
Thanks again.
Click to expand...
Click to collapse
I'm happy for you! Next time be more careful with your new Baby
I've got white i9505 and love it to the bits (my first white phone...)
Under my avatar you'll see "DONATE TO ME" ..... if you want to....
Did you try my Pre-Rooted Rom?? If not, you should
djembey said:
I'm happy for you! Next time be more careful with your new Baby
I've got white i9505 and love it to the bits (my first white phone...)
Under my avatar you'll see "DONATE TO ME" ..... if you want to....
Did you try my Pre-Rooted Rom?? If not, you should
Click to expand...
Click to collapse
You just got a donation my friend!
Didn't try the prerooted... didn't see it for I9505XXUAMDF. Still, I'm used Chainfire's root and I'm back in business. No apps or data were wiped after the flash either, much to my surprise.
Waiting now for a working recovery and a decent ROM, like a Paranoid Android or CM10.1 port. In the mean time, I'm putting up with the TouchWiz jank + 320 DPI in spite of the odd scaling of some apps.
Cheers.
bonstio said:
You just got a donation my friend!
Didn't try the prerooted... didn't see it for I9505XXUAMDF. Still, I'm used Chainfire's root and I'm back in business. No apps or data were wiped after the flash either, much to my surprise.
Waiting now for a working recovery and a decent ROM, like a Paranoid Android or CM10.1 port. In the mean time, I'm putting up with the TouchWiz jank + 320 DPI in spite of the odd scaling of some apps.
Cheers.
Click to expand...
Click to collapse
Thanks a LoT! ) Appreciated
There's XXUAMDF on the list but it will give you just basic root permissions, no access to the system... In your case better use CF as it will give you full access..
Anyway, be more careful in future and enjoy it
S4 i9500 (I9500XXUAMDK with root) has soft brick
Dear friends. I would like your help, if possible! Please!
I did the actualization on my S4 i9500 (I9500XXUAMDK, with root) and after this, I was trying to put more space in sdcard (editing vold fstab files to try to change extSdCard into sdcard).
During this process, appeared a message on the phone about one error there is in sdcard and it suggested me to unmount the sdcard to try solve the problem. So, when I click yes, the phone froze and then I turned it off, but it stock now in Sangung Logo and go to recovery mode. In recovery mode I tryed to clear/mount/unmount any file, but it returns with error to mount any directories.
I think the phone has the files or some partition corrupted!!! . I can access it through ODIN and adb shell as well. There is (in adb commands) a command to fix the partition? How can I do?
With ODIN, I tried to re-install the original FW. It did well (complete the re-install perfectly), but the phone cant finish the instalation after this, because it cant mount anything, and goes to recovery mode with many messages about that it cant mount directories (list a vary directories that wasnt mounted correct).
Everything I try to do, the phones (in recovery mode) returns "cant mount... or error to mount something". I cant too clear cache, format /sdcard or other directory, or reset it to the factory data as well (because I think, the system cant mount any directories).
Somebody had this problem? or could help me to solve it, please!!!
Tks in advance!
Barros
So I'm really into Android developing, I'm always flashing and installing etc, but I got a problem now.
Phone information
LG G2 D802
Rooted
TWRP Recovery 2.7.0.0
Was running 4.4.2, found a kdz file on the internet and flashed it (no regular update from my phone)
What happenedI actually did something stupid, I received an application update from the LG Download Center (or whatever it's called) on my phone and clicked on it. I was planning on flashing Android 4.4.2 again because my firmware was not stable, and I thought this update could help me.
But no, after it finished downloading, I automatically booted into recovery.
What I didSo I tried to reboot and enter my OS, but unfortunately, I was stuck in recovery.
I did everything I could, wiping (Dalvik) cache, factory reset, flashed a new rom, restored Nandroid backup, but no, every time I booted, I got back into recovery again.
I only saw 1 option left, booting into download mode and flashing a new firmware.
I found the Netherlands 16GB kdz file for Android 4.4.2 (because I had a French one first), the one I was looking for.
Looked all over the internet, and all guides pointed me to this guide.
Tried it, but I got multiple errors, one of them was that my phone was not connected while I was at 15% of the flash process.
What happenedAfter that first flashing process, I booted up, but got a Security Error. After the Security Error was showing for 5 seconds, my phone shut down. This is happening every time I try to boot up.
I couldn't access my recovery anymore, nothing. Edit: I can access my recovery right now, and I tried this, but when I boot up I get the Security Error again.
The big problem right now is the Security Error! How do I bypass that?
So can someone please help me out!
Several phones/tablets of mine bricked and I always found a way to get out of it, but not this time, unfortunately...
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
XxZombiePikachu said:
Have you tried this
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Yes, I actually have. Didn't mention it, but after I did that I booted and got an LG logo and below it was a text that said 'Security Error' After like 5 seconds the security error goes away and my phone shuts down. I can only enter download mode right now.
I'll edit my first post with this info.
Thanks for the help though!
Edit: I find a way to access my recovery again because at first I couldn't but I figured out that the code in the thread you linked was a bit different than the code I entered at first.
So I used the code you gave me, but now I get the Security Error again!
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
evilruck said:
Hi mate, just like you i downloaded that damn OTA today and messed up my phone, but in my case was because i had totally forgotten it was rooted and had custom recovery installed :silly::silly::silly::silly:
I followed this tutorial to fix the boot secure error http://forum.xda-developers.com/showthread.php?t=2582142 and it worked like a charm except for download mode wasn't working at all.
After doing some research i found this post http://forums.androidcentral.com/ge...ricked-lg-g2-stuck-twrp-no-download-mode.html and got download mode (apparently) working again but Windows didn't recognize it at all so i couldn't use it to flash the .kdz stock firmware.
In the end i just flashed a custom aosp rom and got my phone back to life but the download mode issue it's still there and it's bothering me quite a lot.
Any suggestion is welcome.
EDIT: Don't download the recovery from the post, instead look for the latest version (2.7.0.0) because the one posted there (2.6.3.2) might corrupt your partitions
Click to expand...
Click to collapse
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Ibrahim9999 said:
Thanks! But does my internal storage get whiped? Will all my pictures etc. be gone?
And the first thred removes the security error right? And after that I can just boot into recovery mode (I can boot in recovery btw) and flash a new rom? Just wanted to know this so I don't go through all that trouble for nothing
Edit: You know I can enter both download and recovery mode right?
Click to expand...
Click to collapse
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
evilruck said:
Nope internal SD remains intact, basically what you'll be doing is pushing the right files into the system partitions and yes, in theory you should be able to flash a new rom.
Even if you can boot into recovery you should do it if you're getting that error, and after that you can just push a ROM file to flash (i'll assume you know how to do it) and btw let me know if you decide to flash a stock based rom instead of an aosp like i did.
Good luck with that :good:
Click to expand...
Click to collapse
Thanks man! I'm probably going to save money because of you, awesome!
Ibrahim9999 said:
Thanks man! I'm probably going to save money because of you, awesome!
Click to expand...
Click to collapse
I hope so!
Let me know if you fix the thing :laugh:
evilruck said:
I hope so!
Let me know if you fix the thing :laugh:
Click to expand...
Click to collapse
I just managed to fix it! Thank you so much man!
Can someone help me plz I got flashily got CWM instead of the TWRP and got and lg update it updated and now it's stuck in recovery mode it won't go into download mode it only goes to recovery mode and my computer won't recognize my phone so if any one knows how to fix it can you plz help me out
my pc don't recognize the lg g2 in download mode!
i installed the drivers and the USB is connected but the pc don;t even say that the device is connected . and nothing in device manager at all
Perhaps you might consider sending it in to lg if you still have warranty. But I'd you don't, there are services on eBay/ Craigslist that can help you.
Sent from my LG-D800 using XDA Free mobile app
Hi all,
So I've decided to root my Exynos International Galaxy Note 3 (SM-N900) using Chainfire's CF-Auto-Root. All went well until Odin got stuck at cache.img, then fails after a couple of minutes. I unplug the phone and restart it, it then displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" whenever I try to boot. I can access download mode again, but not recovery. My phone is stock 4.2.2.
It's the first time I have such a problem, I flashed a couple of phones before without any trouble. I searched XDA for a solution and tried other Odin versions, different cable/ports, even tried on another computer: Same issue. Stuck at cache.img. I can't get my phone to work again. Some people suggested it might have something to do with USB debugging, but I can't remember if I left it enabled or disabled.
I didn't back any of my data (I didn't expect the root to fail...) and retrieving my phone, rooted or not, is of the utmost importance. Please avoid posting solutions that involve data loss.
Feel free to ask about anything I might have left out.
Thanks!
GST_Diandre said:
Hi all,
So I've decided to root my Exynos International Galaxy Note 3 (SM-N900) using Chainfire's CF-Auto-Root. All went well until Odin got stuck at cache.img, then fails after a couple of minutes. I unplug the phone and restart it, it then displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" whenever I try to boot. I can access download mode again, but not recovery. My phone is stock 4.2.2.
It's the first time I have such a problem, I flashed a couple of phones before without any trouble. I searched XDA for a solution and tried other Odin versions, different cable/ports, even tried on another computer: Same issue. Stuck at cache.img. I can't get my phone to work again. Some people suggested it might have something to do with USB debugging, but I can't remember if I left it enabled or disabled.
I didn't back any of my data (I didn't expect the root to fail...) and retrieving my phone, rooted or not, is of the utmost importance. Please avoid posting solutions that involve data loss.
Feel free to ask about anything I might have left out.
Thanks!
Click to expand...
Click to collapse
I think you'll have to flash an official Sammy Firmware to get past the error, although if you look in the Note 3 Android Development, I recall seeing some deodexed, rooted firmware that is supposed to work from Odin. Not sure if any of them are for exynos version though.
Data? I keep everything I can on the extSD for exactly this reason. You should be able to remove the card and put it in a card caddy and read it in a PC and copy out your media etc. The root process shouldn't have overwritten anything you need.
For rooting, maybe DL the SuperSU zip file Chainfire's website and flash it in Recovery once you're up and running? I use TWRP but Philz or CWM recoveries will do it.
Journyman16 said:
I think you'll have to flash an official Sammy Firmware to get past the error, although if you look in the Note 3 Android Development, I recall seeing some deodexed, rooted firmware that is supposed to work from Odin. Not sure if any of them are for exynos version though.
Data? I keep everything I can on the extSD for exactly this reason. You should be able to remove the card and put it in a card caddy and read it in a PC and copy out your media etc. The root process shouldn't have overwritten anything you need.
For rooting, maybe DL the SuperSU zip file Chainfire's website and flash it in Recovery once you're up and running? I use TWRP but Philz or CWM recoveries will do it.
Click to expand...
Click to collapse
I see. So in newbie terms, if I flash the official firmware I have from SamMobile, I should have my phone back running with all my apps & data? Also, any hint about why rooting didn't work in the first place?
After this tragic experience with Odin, I'm gonna forget root for now, maybe update to Lollipop then think about rooting again.
Thanks for replying !
GST_Diandre said:
I see. So in newbie terms, if I flash the official firmware I have from SamMobile, I should have my phone back running with all my apps & data? Also, any hint about why rooting didn't work in the first place?
After this tragic experience with Odin, I'm gonna forget root for now, maybe update to Lollipop then think about rooting again.
Thanks for replying !
Click to expand...
Click to collapse
Did the official firmware work when you did it? If so, download Phone INFO Samsung from Play and use it to check what hardware you actually have.
I have had issues with CF-Auto root recently so I flash Stock, then the TWRP md5 file (in Odin 3.09) then I boot into Recovery and flash SuperSU. That gives me Recovery and root. You normally have to run SuperSU when you start so it can update.
U[pdating to LP is a good idea - most of the things going on in Dev are now LP versions.
Journyman16 said:
Did the official firmware work when you did it? If so, download Phone INFO Samsung from Play and use it to check what hardware you actually have.
I have had issues with CF-Auto root recently so I flash Stock, then the TWRP md5 file (in Odin 3.09) then I boot into Recovery and flash SuperSU. That gives me Recovery and root. You normally have to run SuperSU when you start so it can update.
U[pdating to LP is a good idea - most of the things going on in Dev are now LP versions.
Click to expand...
Click to collapse
I didn't flash the official firmware ever. Before trying to root with Odin and getting it stuck, I never flashed or modified anything internally on this phone.
Obviously, I can't use Phone INFO because my phone is stuck at BSOD.
I will upgrade to Lollipop, once I can get my phone working as it was. For now I'm still hesitating to flash the official firmware. I don't know if that would wipe the apps or just get back the phone as it was.
GST_Diandre said:
I didn't flash the official firmware ever. Before trying to root with Odin and getting it stuck, I never flashed or modified anything internally on this phone.
Obviously, I can't use Phone INFO because my phone is stuck at BSOD.
I will upgrade to Lollipop, once I can get my phone working as it was. For now I'm still hesitating to flash the official firmware. I don't know if that would wipe the apps or just get back the phone as it was.
Click to expand...
Click to collapse
It will wipe Apps and Data - it makes your phone like you just bought it.
I didn't realise it was stuck in that mode - just thought that happened whenever you tried to flash something.
First thing. Turn phone off. Take back off and remove battery for 10 secs or so. Turn it on holding down Vol Down + Home + Power - release when DL screen shows and press Vol Down. If that gets you into the phone, spend some time saving your data to extSD.
I use Call Logs Backup & Restore, SMS Backup & Restore, I export my Contacts to ext storage. I use TiBu to backup all my apps to a folder on extSDCard. If you are on Stock ROM, you should be able to set your camera to save to extSDCard but you need a file explorer (I use ES File Explorer) to copy your current DCIM folder across - other than that, look for music, documents and video folders on internal memory)
If it doesn't open the phone for you, & your data is important, take card out and use adapter to save data onto a computer.
Go to Sammobile and download the proper official firmware for your phone - note you need to set up a free account before you can DL.
Download Odin 3.09 Run Odin
Then repeat the phone process but this time press Vol Up when at the DL screen. It is important to have the phone Off and electrically flat before attempting a firmware update.
Connect phone to PC - Odin should recognise it. If it doesn't you probably need the Samsung USB Drivers so get them and install them.
Then connect phone again. Click AP and find your DL from Sammobile. Wait for it to load then press Start. Wait... it will reboot and usually sits on the logo for quite some time.
Set up your phone, and restore or reinstall your apps.
Rotsa Ruck!
Journyman16 said:
It will wipe Apps and Data - it makes your phone like you just bought it.
I didn't realise it was stuck in that mode - just thought that happened whenever you tried to flash something.
First thing. Turn phone off. Take back off and remove battery for 10 secs or so. Turn it on holding down Vol Down + Home + Power - release when DL screen shows and press Vol Down. If that gets you into the phone, spend some time saving your data to extSD.
I use Call Logs Backup & Restore, SMS Backup & Restore, I export my Contacts to ext storage. I use TiBu to backup all my apps to a folder on extSDCard. If you are on Stock ROM, you should be able to set your camera to save to extSDCard but you need a file explorer (I use ES File Explorer) to copy your current DCIM folder across - other than that, look for music, documents and video folders on internal memory)
If it doesn't open the phone for you, & your data is important, take card out and use adapter to save data onto a computer.
Go to Sammobile and download the proper official firmware for your phone - note you need to set up a free account before you can DL.
Download Odin 3.09 Run Odin
Then repeat the phone process but this time press Vol Up when at the DL screen. It is important to have the phone Off and electrically flat before attempting a firmware update.
Connect phone to PC - Odin should recognise it. If it doesn't you probably need the Samsung USB Drivers so get them and install them.
Then connect phone again. Click AP and find your DL from Sammobile. Wait for it to load then press Start. Wait... it will reboot and usually sits on the logo for quite some time.
Set up your phone, and restore or reinstall your apps.
Rotsa Ruck!
Click to expand...
Click to collapse
Thank you, I just tried going into download mode and pressing vol down, still get the same BSOD. I guess that means phone cannot be recovered as it is...
I'm backing up my stuff now. I have no problem backing up contacts/SMS/etc.., but can you tell me whether I can still back up applications and restore them as they were using Titanium Backup on PC ? I know this should have been done before even soft-bricking my phone, but since it inaccessible to run the app on it...
I already have the official firmware waiting to be installed, just need to be sure about TiBU and that I backed up everything correctly Thanks for answering !
GST_Diandre said:
Thank you, I just tried going into download mode and pressing vol down, still get the same BSOD. I guess that means phone cannot be recovered as it is...
I'm backing up my stuff now. I have no problem backing up contacts/SMS/etc.., but can you tell me whether I can still back up applications and restore them as they were using Titanium Backup on PC ? I know this should have been done before even soft-bricking my phone, but since it inaccessible to run the app on it...
I already have the official firmware waiting to be installed, just need to be sure about TiBU and that I backed up everything correctly Thanks for answering !
Click to expand...
Click to collapse
That depends... TiBu can only recover what you've saved (obvious I know...) and only if it didn't get wiped in the new firmware flash. (which it will if you didn't choose extSDCard for the backups)
Other than that, once your phone is set up and your Google account active, Play Store will DL all your apps.
Journyman16 said:
That depends... TiBu can only recover what you've saved (obvious I know...) and only if it didn't get wiped in the new firmware flash. (which it will if you didn't choose extSDCard for the backups)
Other than that, once your phone is set up and your Google account active, Play Store will DL all your apps.
Click to expand...
Click to collapse
Okay great So where exactly do I get TiBu for pc?
GST_Diandre said:
Okay great So where exactly do I get TiBu for pc?
Click to expand...
Click to collapse
Unfortunately it's a Play Store app, so first you have to get your phone working.
You could try the attached from Recovery but I have no idea if it would work as it's from my rooted CM12.1 system.
Journyman16 said:
Unfortunately it's a Play Store app, so first you have to get your phone working.
You could try the attached from Recovery but I have no idea if it would work as it's from my rooted CM12.1 system.
Click to expand...
Click to collapse
Recovery isn't working for me... The only thing I can access on the phone is Download mode.
I guess it's lost? :/
GST_Diandre said:
Recovery isn't working for me... The only thing I can access on the phone is Download mode.
I guess it's lost? :/
Click to expand...
Click to collapse
The only other thing I can think of would be using ADB over USB but I don't know if that would work with DL mode or if it is only for Recovery. You'd have to search and learn how to use it.
So maybe time to just get the phone working and make sure for future you have backups?
Journyman16 said:
The only other thing I can think of would be using ADB over USB but I don't know if that would work with DL mode or if it is only for Recovery. You'd have to search and learn how to use it.
So maybe time to just get the phone working and make sure for future you have backups?
Click to expand...
Click to collapse
SOLVED. I can't believe how easy it was. I was about to flash it over from scratch but then it struck me.
Chainfire ships Odin with all its root bundles, a version where you cannot untick "Auto Reboot". Because of Auto Reboot being ticked, Odin freezes at "cache.img". It might not freeze for some people but for me, having Auto Reboot activated causes the freeze
Downloading a different version of Odin (any version, I used 3.09) that allows changing parameters and LEAVING EVERYTHING UNTICKED BUT F. RESET TIME works like a charm.
Don't forget to reboot your phone after Odin displays PASS or RESET (Long press power).
I'm going to PM Chainfire about this, and tell a max of people about it.
Thank you for your support
EDIT: Also going to NANDroid my phone. I'm tired of panicking over failed roots
I have a S4, I337 AT&T device and I think I bricked it by trying to install TWRP, it didn't work... I was trying Muniz_ri's "Update to i337 ok2 5.0.1 and keep root", I couldn't get the Flashfire to load, lots of stuff about rooting and no Supersu something... Any help..?
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
sway8966 said:
If you i337 is not on mdl or mdb bootloader you can not install TWRP.
If you phone is brick how could you install the flash fire?
Flashfire works well with stock rom. Are you on custom rom?
In note section of the muniz_is post , the #4 stated that "4. If you are not already rooted (or to unbrick) you must first flash the I337UCUFNB1_Rootable_Full_Odin.tar (use Odin's PDA slot (AP in Odin v3.09+), root with Towelroot, then proceed with the above process." . Did you follow that step?
Click to expand...
Click to collapse
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
lentmain said:
I'm on 5.0.1 Lollipop, the second one From Aug 11 OTA by the seller I bought it from.... I was new to android and didn't know there was a download mode....
The baseband version is: I think it is called I337OCOG0C4... It is the stock rom that came on the phone.... I can't find the stock ROM to redo it( try to at least...) It's on 0C4... I AM rooted , by Kingroot... Verification says so.... Two different versifiers... When I go to flash..., it comes up with that message... I tried removing Busy box and reinstalling it... it was ok... I reinstalled Safestrap .... It loaded fine...
When I got to NC1 flash..., it says it can't see busy box or safestrap, either one might have a problem... They both loaded fine..... I tried flashing the Tar from above... Odin just sat there and finally said fail... twice.... I think the corruption is hurting the ability to enter recovery on the phone.... I can't enter "Recovery Mode" on the phone... It is damaged.... I thought flashing could do it...
Click to expand...
Click to collapse
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
sway8966 said:
If you followed Muniz_is instruction step by step I don't think you should have a problem.
I used SS (safestrap) when I was in kit-kat alot but not anymore. It is tricky to use SS in lollipop. So I can not give you any comment on using SS. I use flashfire app instead.
So every time I want to install the custom rom, I followed Muniz_is instructions. Odin the NB1, use towelroot to root, install flashfire and flash the rooted OC4, install flashfire again and then flash the custom rom.
Muniz_is post is updated to OK2 but I am still using the OC4 files that posted previously. If you want to stay on OC4 do let me know.
What do you mean you can not enter recovery mode? I am sure you know the key sequence (press power+home+volume up) for recovery mode. If your phone is bricked, then you need to press the same keys for at least 10 sec and then let the power button go but keep pressing the home+volume-up until you felt the phone vibrate and see the small blue label at the top of the screen.
To use the odin you have to be in the download mode. To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
lentmain said:
Your recovery mode probably works fine.... Mine is corrupt... You must use Recovery mode in Odin... I tried... Failed twice... Tried 4 other .tar's.... No good... A FAIL for each... I guess you have to have Recovery Mode just to allow the device to do anything... I DO appreciate you guys and ALL of your efforts ...... Maybe we could put my device on Android Studio and look at what is hurting it... I'd love that....
Click to expand...
Click to collapse
blablu said:
I had got myself into same mess in early January 2016 but I got out and all is working perfectly fine with me. Can you successfully get your i337 into download mode? if YES contact me via PM and I can tell you exact steps I performed to get myself back into fully working condition. Believe me it's simple steps not rocket science - just that one needs to perform very carefully.
To get to the download mode you need to press power+home+volume-down.
Click to expand...
Click to collapse
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
lentmain said:
Neither device will boot into Recovery mode... It gives 5 or 6 lines of stuff..., then freezes up... I can release it to use the phone... I'd like to try using Android Studio to see what can be done...
Isn't there a "Format" system and re-installation plan I can use..., like doing a computers hard drive..?
Click to expand...
Click to collapse
blablu said:
Recovery mode is different - it is WAY different - it will never boot into that mode as memory is messed up with wrong code.
I AM ASKING YOU TO GET IT INTO DOWNLOAD MODE - to get into download mode - the messed code is not executed....Try to get into DOWNLOAD MODE - i am 100% sure - it will go into download mode....It should....
Click to expand...
Click to collapse
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
lentmain said:
I have told you....." I pressed up vol, home and start at the same time... That should have started Recovery Mode... It didn't... It froze up at the little green man screen...."
MY DOWNLOAD MODE IS CORRUPT..... I can't figure another way around this....
If someone knew how to view the devices program on Android Studio..., MAYBE something could be done with the programming.... I'm not sure if a "Cut and Paste " would work on there... I guess I need to get a book on Android Studio... I already have it ( Android Studio SDK ) on my computer....
Any one here can tell me how to run it..?
Click to expand...
Click to collapse
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
It froze up.... It stopped moving foward to the lower potion of the Recovery program.... At the bottom..., you can choose the different ways to manipulate the program... Mine, both phone stop at the processing sign in....
It will require something more than a few buttons being pressed.... I'll have to learn to use the Android Studio and either rebuild the program from within or to reprogram it from outside..., like with a .tar flash....
blablu said:
Ok.
can you tell me what exactly happens when you press power+home+volume-down?
How did u arrive to conclusion that your download mode is corrupted?
Click to expand...
Click to collapse
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
If u are able to get to download mode - I strongly recommend first you flash ONLY Stock Partition file.
Then again reboot in download mode and then try the FNB1 file....this may work...but before all this flash proper pit file - refer to http://forum.xda-developers.com/showthread.php?t=2496517
stock partition file(s) are available on xda - search and download....
lentmain said:
I reflashed an At&t .pit file ( using Odin) and it rebuilt my file ( partition) for Recovery mode... Not sure how it did it... Now when I CAN get into recovery mode..., it doesn't recognize the SD card so I can't use the tools in Recovery mode to change the rom to something earlier, like Muniz_ri did in one of his wonderful fixes... (Double thanks Muniz_ri..)
Once Odin sees my device..., I set it up yo start a Muniz_ri renewing rom ( I337UCUFNB1_TWROOTABLE_FULL_ODIN.tar.md5 ) and it gets to "system.img.ext4" about 10% into it and then it freezes up....
Anyone have any ideas..?
Click to expand...
Click to collapse
My N910F had a terminal accident this evening, it received a blow to the screen and now there's no way fo me to use it. I tried to use google's remote device app to wipe it and though I'd managed it. But I'm not sure that it has!
I was running a custom rom with twrp and when I tried a button combo that's supposed to initiate a wipe, I noticed something pop up on the screen and when I connected it to my pc I could not only see the phone on windows explorer, it actually showed the files! From one of the very few times I saw something on the screen, I recognized the TWRP homescreen, so it had been put into recovery!
I'm not bothered about putting the phone back to stock, I just want to wipe it so I can sell it for parts. I can't do anything in KIES as it's locked (fingerprint with password backup). I cant even try using a usb mouse with my otg as whenever I disconnect from the pc, the screen goes off (it's rarely even showing anything anyway.
Is there any way to just install stock firmware or even my rom, directly through odin? I'm used to flashing roms through twrp.
woldranger said:
My N910F had a terminal accident this evening, it received a blow to the screen and now there's no way fo me to use it. I tried to use google's remote device app to wipe it and though I'd managed it. But I'm not sure that it has!
I was running a custom rom with twrp and when I tried a button combo that's supposed to initiate a wipe, I noticed something pop up on the screen and when I connected it to my pc I could not only see the phone on windows explorer, it actually showed the files! From one of the very few times I saw something on the screen, I recognized the TWRP homescreen, so it had been put into recovery!
I'm not bothered about putting the phone back to stock, I just want to wipe it so I can sell it for parts. I can't do anything in KIES as it's locked (fingerprint with password backup). I cant even try using a usb mouse with my otg as whenever I disconnect from the pc, the screen goes off (it's rarely even showing anything anyway.
Is there any way to just install stock firmware or even my rom, directly through odin? I'm used to flashing roms through twrp.
Click to expand...
Click to collapse
If the emmc is still sane, u can try stock with odin - google 4 files repair firmware for your model. Not a custom rom, it need the custom recovery which seems not to work anymore.
w41ru5 said:
If the emmc is still sane, u can try stock with odin - google 4 files repair firmware for your model. Not a custom rom, it need the custom recovery which seems not to work anymore.
Click to expand...
Click to collapse
I tried to flash it with 2 different versions of odin, 3.09 which is what I always used to use and 3.12.3 as this seemed the most recent. Ran with and without admin privilege and got a fail every time.
I've gone back onto the Sammobile site to download another version of the firmware but it's sooooo slow - when did they slow things down so much??
Is there likely to be any difference between the versions of the firmware? I'm running a N910F here in the uk. But at the end of the day, all I want to do is to wipe my personal data by flashing any stock N910F rom
So I managed to get through the flashing process but it doesn't appear to have worked! The device still shows up as it was before I tried flashing it - I repeated the process but still nothing.
I need to remove any data before I can try and sell it - what do you suggest?
Any suggestions guys? Sorry to bump an old thread but I never did get it sorted. I'm running an LG V20 now but would like to be sure that the N910 is wiped clean of any and all personal data before selling it.
USB debugging isn't active so I can't do anything with adb - I've tried lots of options.
Flash stock bootloader
start phone in recovery mode (vol up + home buttons)
press down 4 (3) times to select factory reset (5 (4) for cache wipe) and press power depend on bootloader factory reset is 4-th or 5-th option
press down 7 times and then power again.
But why to bother of it if it is finger and password protected?
Another option is to sell me the board, my emmc chip just died. I'm in UK too.
Alex[Y] said:
Flash stock bootloader
start phone in recovery mode (vol up + home buttons)
press down 4 (3) times to select factory reset (5 (4) for cache wipe) and press power depend on bootloader factory reset is 4-th or 5-th option
press down 7 times and then power again.
But why to bother of it if it is finger and password protected?
Another option is to sell me the board, my emmc chip just died. I'm in UK too.
Click to expand...
Click to collapse
I'll give that a try, but I don't know how I'd find out if it had been successful?
I'd rather not risk someone being able to access ALL the info on there for the money I'd get for it on ebay.
woldranger said:
I'll give that a try, but I don't know how I'd find out if it had been successful?.
Click to expand...
Click to collapse
No personal files when connected to PC should be enough.
woldranger said:
I'd rather not risk someone being able to access ALL the info on there for the money I'd get for it on ebay.
Click to expand...
Click to collapse
Another option go to repair shop and ask them to wipe it with their test display. Display removal (with its full destruction) will be required.
Alex[Y] said:
No personal files when connected to PC should be enough.
Thanks for jumping in!
"Should"? I wouldn't want to risk someone recovering my personal data.
Another option go to repair shop and ask them to wipe it with their test display. Display removal (with its full destruction) will be required.
Click to expand...
Click to collapse
But that would involve me paying - I won't get much for the phone as it is anyway.
I finally managed to flash the phone back to stock with Odin! :highfive:
It was last on N910FXXS1DQFA so I tried Odin v3.10.7 and flashed N910FXXS1DQE91 with no issues. Obviously, nothing of note shows up on the pc, but when I click on the device in windows explorer and look up the properties, it shows the new firmware is installed!
So, FINALLY, my Note 4 is fully wiped and I can try and sell it for spares - thanks a lot for any and all input and comments guys! :good::good:
woldranger said:
I finally managed to flash the phone back to stock with Odin! :highfive:
It was last on N910FXXS1DQFA so I tried Odin v3.10.7 and flashed N910FXXS1DQE91 with no issues. Obviously, nothing of note shows up on the pc, but when I click on the device in windows explorer and look up the properties, it shows the new firmware is installed!
So, FINALLY, my Note 4 is fully wiped and I can try and sell it for spares - thanks a lot for any and all input and comments guys! :good::good:
Click to expand...
Click to collapse
For my knowledge user data is wiped out by odin only if you tick "NAND erase all" but I'm not sure if it is not wiping some other important data like EFS partition. When phone is connected to PC try unlock it with the finger. Another possibility is that by downgrading you have corrupted EFS partition, but not sure of that.