Related
if you are stuck in boot loop or having difficulty starting your phone, don't worry, there should be a way.
I have experienced this issue today after flashing wrong file causing my phone to stuck in boot loop. after searching in this forum and after spending over 3 hours, I finally managed to restore my phone and it is now working perfectly fine.
therefore, I thought of making a basic guide to try to resolve such issues. please note, this is a very basic guide to resolve problems with starting your phone, I am not professional but will try to share my experience and help anyone in need. this was done on X10i
lets start:
1- if you have a recent back up and have access to xrec, you can simply restore your phone
2- if you have access to xrec but don't have a backup, try to flash a new ROM
I tried the previous two steps but it kept saying can't mount SD, therfore try the following
3- if you don't have xrec access, use the flash tool
download from here http://www.multiupload.com/7H4JT35B6G
then flash generic 2.1 to your x10, I used this one http://www.mediafire.com/?sqv6274anzfzn2x
here is the guide on how to do it http://forum.xda-developers.com/showpost.php?p=10879528&postcount=3
I have had problem saying "install or re-install drivers", you just need to install the file in the drivers folder in the flash tool main folder and restart the flash tool program
4- after flashing this ROM, restart your phone and root it using the flash tool, after the root your phone will restart, then you need to ask for premession and click xrec to install xrec to your phone
5- before installing new ROM, please make sure that your baseband and karnel is compatible with it (because the ROM you flashed earlier has old karnel and you will be stuck again in the boot loop if you flashed 2.3.3 just like me, then you will need to start again and install new karnel before instaling 2.3.3 ROM or even restore 2.3.3 ROM)
(you can simply install the new ROM then restart in flash mode and flash the new karnel .71 or flash the karnel and restore your backup)
I know that my choices of flash tool version or generic 2.1 version might not be the best, but I used them and resolved my issue and hope it will resolve yours. for any question please do not hesitate to ask me.
credits to everyone who helped, I can't remember everyone because I read quite a lot so please forgive me
nice post my friend
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
it sounds to me that u may need to install the semc flash drivers.. inside the flashtool u may find a folder named drivers, go inside of that folder and install ggsetup.. also do u have pc companion installed?
tripico said:
In flash tool I'm getting an error:
ERROR - USB\VID_0FCE&PID_ADDE\5&2BFAB030&0&5
any idea what to do?
Click to expand...
Click to collapse
can you post the log from the flash tool so I can see at which step exactly this massage came up
I am fairly novice when it comes to flashing so here's a pretty dumb question:
I have an X10a, can I use the X10i software that you've linked in your post or is it just going to brick my phone.
Hello Guys, i know there has been a lot of threads about this problem but mine one is different
My phone was running FF OS 1.2 Beta(Official builds by ZTE). And i flashed recovery from this file cause i wanted to install cwm on my phone. After that i flashed GB package for bricked phones to be able to flash Update-Signed.zip. It went successful but phone kept restarting. I wasn't able to install V1.0 from 1.2 recovery so that's why i decided to flash this recovery
Now the problem is i can't flash any ROM(Verification errors)
Tried the following:-
*GB update for bricked devices
*Update-Signed.zip(for bicked phones)
*V1.1(for 1.0)
*V1.1(for 1.1)from ZTE Site
Now what can i do?
Any suggestions?
Thanks
Hi Linuxholic
did you try to follow the instructions from the mozilla developer network? (sorry cannot post links but search for mdn zte open - its the first link on google search)
section "I bricked my phone"
Q&A for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
xolanir said:
So I flashed the latest TWRP 2.8.1.0 using ADB on my 2012 N7 running the official 5.0. Read the OP to see if it was compatible and didn't see anything mentioned about it. It flashed without an issue but upon booting into recovery, I got a dead robot with the red triangle with an exclamation. Does this mean that Android 5.0 isn't supported yet? Thx in advance for the help!
Edit: Reflashed and fixed. 1st flash was probably a bad download. Thx!
Edit 2: flashed recovery.img successfully, but was stuck on boot up for 30mins. Had to reflash device back to stock to fix. Is lollipop not supported yet?
Click to expand...
Click to collapse
same here
this work, thank you so much!
Franz22 said:
this work, thank you so much!
Click to expand...
Click to collapse
Was able to figure it out and make it work. Not sure what it was that didn't let cmd flash the recovery, but when I used the flashing recovery option in NRT, it worked like a charm.
http://forum.xda-developers.com/showthread.php?p=56752535
[RECOVERY][grouper] TWRP 2.8.1.0 touch recovery [2014-10-29]
[quote name="bombadier" post=56749620]How are you installing the ROM? If you are using the factory images then extract the boot and system images and flash them using fastboot ,if its not booting past......
Sent from my Nexus 7 using Tapatalk
Trying to install last TWRP recovery on dev-unlocked HTC One (M7) via fastboot.
All was ok, but cannot enter into recovery. It shows me "Entering recovery" page with HTC logo and nothing happened.
And when i tried to use .apk into Android it says "TWRP Manager has crashed".
download website seems not working either with app or by website
is there any mirror ?
thanks
Anybody having 2.8.4.1 as a flashable zip?
Install TWRP on Xperia Acro S lt26w
Hi to all. How I can Install TWRP on my Xperia Acro S lt26w. I saw ROMS for my phone with TWRP, but I cant manualy install it becouse my phone model in TWRP Manager (ROOT) from Google Play is not listed.
Sry for bad English.
So i had hurricane v12 working on my n7100 for quite some time and today i decided to flash another rom, ihad twrp 2.7 installed on my N7100, so today i updated to twrp 2.8.6 in hopes of installing another rom, and right after twrp update when i rebooted i noticed i have no signal and that my imei is corrupted, it says it's unknown. i have an old efs.img but cant restore it, tried dr.ketans solution and this one and couldnt restore the imei. do i need to have same rom installed as when i made the efs backup? becaouse im not sure if the backup i have is from when i had hurricane installed, maybe its from 4.2 version of android. Is there any help for my phone?
Leads to bootloop
Moto G XT033 with Lollipop 5.0.2
TWRP was working nice until I make a ROM backup. After finishing the backup (only saved the ROM file. Did not restore) I rebooted the system and BAN! My phone was gone!
Searching a few topics, I found more users with the same problem: uses backup feature and get a bootloop.
Watch your steps, moto G users!
ONE Click Warranty Back
hello Friends This My First Thread on G 2014(Titan)
Now Get Yours Warranty Back In just one Click
No need to rememberer all this such big commands of FastBoot
i gonna present the simplest way to revert back to stock official Roms with both locked and unlocked Boatloader(after flash) which r Provided in the below links
Pls do press thanks If u really liked my work i need it :good:
best simple way in simple one click (action performed)
!!Disclaimer!!
NOTE: I am not responsible for any kind of boot-logo, corrupt partition,bricked devices, dead SD cards,other Issue etc As I am just new to android developing
This process have been tested personally on my device moto g 2104
NOTE :This Will wipe all your data so pls take all yours useful databackup
INSTRUCTION
1) Download and install the Basic Moto Drives in this http://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97326/p/30,6720,9050
2)Download the required Official Firmware(KitKat,Lollipop) form here https://mega.nz/#F!Q9YHCQzY!dgyvAJ8eNA3t7az4vizwOQ which i have taken Through Original Motorola Firmware Collection[Thread] thanks to @gregor160300
all the Firmware are Official images and are uploaded Recently
3)Download the OneClick Tool zip according to yours need a(locked) and b(Unlocked) form Here
a)restore with locked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfmlMT3BoMmxqakU0M0lJdDk0OGF3UmVJZWN5eW90a0pIdUtSU3BRb0pxbms
b)restore with unlocked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfktRWG1wbFJ6S2JnLU5FTFBNUWp2ckRZWnZmMUVfV1hiX3JjUGw0am1LR2s
4)Now Extract the Firmware zip to a Particular Folder at your given location on your PC/Laptop
5)After That Extract the OneClick zip to a Same Folder (Where U have the Extracted the Firmware Files)
6)Boot your Moto G 2014 into FastBoot Mode and plug your Device into your computer (pls Make sure u have all the proper device drivers are installed)
6)Finally Go To the Extracted Folder and u will see OneClick .bat file just click on OneClick
U r done Njoy till its gets Completed
All the Firmware are Official images Your warranty may not Void also u may get Yours Warrenty Back
hope u Enjoy this
PLS DON'T MIRROR THE LINKS
sry for my bad english i will improve
special Thanks to both @ archies20 @gregor160300,Shawn5162 for their thread:laugh::laugh:
Please Do press Thanks button if u really liked My Work i really need it :good:
It's For Indian Version ?
yes u can check this according to the indian baseband
Tried it today and it worked flawlessly, thanks!
heeey thanks 4 the reveiw hope i will come with other thread
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Mike20017 said:
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Click to expand...
Click to collapse
Change both sim slots?
do a clean Install make a try if still not working change the baseband version and check out again if still not working den hope a hardware fix will resolve it
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Moto bootloop struck help help
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
yes
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html
Kindly First Update yours boot loader Version
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works
Marcelo_RJ said:
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Click to expand...
Click to collapse
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html
Kindly First Update yours boot loader Version
sudheerkk87 said:
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
Click to expand...
Click to collapse
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works
thnks .......
woow its working great . very simplest way thank u so much
bhu999 said:
heeey thanks 4 the reveiw hope i will come with other thread
Click to expand...
Click to collapse
Can I get OTA update after this ?
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
mudit56 said:
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
Click to expand...
Click to collapse
Yes
woow...
wow its working great for me... very simply to use ... am not face any bugs.......... thanks for your work:good:
@bhu999 Thanks it worked awesome.
one question can i get official OTA update from Motorola if i root my device now ??? Because for rooting custom recovery is required and it is impossible to get OTA while on custom recovery. Right ??
yes u can but with stock recovery
just flash the stock recovery to get the available update also
In One Click method u can get the official available update after completing the whole procedure
Dear Seniors.
I am facing great hardship because my phone is stuck at boot logo.
No booting in recovery mode to flash another rom.
I did unlock bootloader of it by using tuliptool with success. After that i flashed custom rom in it. after reboot it is happening that.
Please suggest to recover it.
Did you flash twrp after unlocking? Did you make backup of stock ROM? Perhaps find a version of the factory firmware and flash that.
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
modorate said:
Dear I have no backup and i flashed TWRP recovery.......
It is to aware you that i did relock bootloader now my phone is working properly. but i am unable to enter recovery mode. !!!
Now my phone is running android 6.0.1 B02
But i am failed to root this rom uptill now due above mentioned problem.
Click to expand...
Click to collapse
I found software update notification but when i update an error accruing while update. (This update not compatible with this device"
In easy words......... my recovery.img has been corrupted. I have no idea to get rid of this situation.
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
bao_gg said:
I planned to unlock my Mini's bootloader this weekend. After reading this post, I decided to act later until the root cause has been figured out.
Click to expand...
Click to collapse
Several people myself included have been able to use tuliptool to successfully unlock and root the device.
mine is hard bricked too. but I think it is worse than the case listed on the op.
if you want to hard bricked these are the steps:
follow the procedure to install the Spanish ROM 6.1, than another android m b12, than finally the android seven......use tulip tool and install twpr fine, root ect. amazing ROM.......buuuuut......I lost my IMEI somewhere in this process, and the original FTM which had a small menu changes to another static one, without the menu.
I needed this menu to open the com port to fix the IMEI. than I had the brilliant idea to re-flash android M via twrp (without modifying the zip file to remove the recovery, something I knew so well from the older axon mini).
results:
-lost twpr because the stock ROM wrote over it,
-cannot boot the OS because I flashed android m but the phone had the aboot 7.
-i now have a brick
I need a genious to sujest something to bring it back to life........sh....t...sh...t.....sh...t
any chances I could inject aboot7 via ADB through my dead recovery which somehow the phone recognises? ADB shell still seems to be working
thanks