Flashing stock images problem. - Nexus 6P Q&A, Help & Troubleshooting

I was systemless-rooted, with xposed installed on 6.0.1 with the December security patch.
I went ahead and tried to flash the February Security patch through Fastboot (Followed the steps in order to not get my data wiped)
Tried to boot, and was told encryption failed, so I basically had to wipe my phone completely.
Now I have a problem. Since I am on the latest build number (mmb29q) I don't know which custom boot image it is that I have to use in order to flash a custom recovery and root my phone again.

If you jst flash recovery via fastboot then flash latest supersu and you'll be good. 2.67. When twrp asks to root select no and reboot and you will be good or you could use a custom kernel and su or I came across this
http://forum.xda-developers.com/showthread.php?t=3306684 I think it's what your looking for.
Edit

DoUknoGREG said:
I was systemless-rooted, with xposed installed on 6.0.1 with the December security patch.
I went ahead and tried to flash the February Security patch through Fastboot (Followed the steps in order to not get my data wiped)
Tried to boot, and was told encryption failed, so I basically had to wipe my phone completely.
Now I have a problem. Since I am on the latest build number (mmb29q) I don't know which custom boot image it is that I have to use in order to flash a custom recovery and root my phone again.
Click to expand...
Click to collapse
I'm not sure what the problem is here, you don't need a custom boot.img to install TWRP, just flash it. You don't need a custom boot.img for root either, systemless SuperSU patches the boot.img for you. It's all in my guide:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928

Related

Updating firmware and root?

Hi guys,
I know how rooting and flashing works but I've been using HTC devices since the nexus one so there are some differences I just want to make sure of. I got my 6P yesterday, I unlocked the bootloader and flashed TWRP. I wanted to gain root but Im not sure about flashing the modified boot img and the vendor thing.
My build was K but I got an OTA before unlocking the bootloader which updated to L. Anyway I don't know why I just formatted every thing in TWRP instead of the factory reset and I lost the OS X_X I tried to restore my nandroid with no luck. Anyway I got the factory img (MDB08L) from google dev and flashed used 'flash-all.bat' in the bootloader, the phone is running fine right now but I would like to update to the latest firmware 6.0.1+root since im not getting any OTA.
I would like to install CleanCore(6.0.1), the guide is
-> Flash Bootloader & Radio (as needed)
-> Flash CleanCore
-> Flash Modified Boot (named angler-xxxxxx-boot.zip)
-> Flash SuperSU or SuperSU Beta
-> Flash latest vendor.img (ROM & Vendor builds need to match!)
1. Should I use MMB29M factory img and flash 'flash-all.bat' like I did with the L build for the first step? then I flash new recovery?
-Flashing the rom through the recovery
2. so after I flash the rom I boot into the bootloader and flash the modified boot img with fastboot flash boot boot.img right?
3. then I go back to recovery and flash SU which I should download before.
4. vendor img is flashed in recovery too or fastboot?
Sorry for the hassle I just want to make sure.
One more thing, in this guide http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 at step 9, OP flashes the factroy img files separately (bootloader,radio,etc), is there a problem with using flashall.bat?
Thanks in advance and sorry for my noobish questions.
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Enddo said:
If you want to keep your data while doing this process, then yes, using the flash-all.bat is a problem. However, if you are fine with reverting back to stock(where you have to activate Android and reinstall all of your apps) then the flash-all.bat file is just fine.
That guide in the thread you linked walks you through how to update without losing data. After doing all of that, you'll just need to install TWRP and SuperSU again(do the latest systemless supersu though)
Click to expand...
Click to collapse
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
mr.dj26 said:
Thanks for the help.
I have rooted my stock rom and gained root. I also installed exposed so i'll be fine without a custom rom for some time. There has been a report that some cameras aren't working on 6.0.1 with root so I'll wait for a while.
Thanks again
Click to expand...
Click to collapse
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Enddo said:
I'm pretty sure those reports are because they used the SuperSU root method that didn't auto patch the boot image(which is the version(or two versions) behind the current version of SuperSU). This is happening because people are updating to 6.0.1, but the patched SuperSU boot image is for 6.0 and the 6.0 boot image conflicts with 6.0.1
As long as you use the latest version of SuperSU then you won't have any trouble with the camera
Click to expand...
Click to collapse
Thanks for the info

Root and update firmware from 6.0.1

I rooted the phone (XT1642) using this guide: https://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
I'm on 6.0.1 and have been getting the install system update prompt (NPJ25.93-14) every time I turn WiFi on.
Can I just install this or will it remove the rooting I did?
If it removes the root, how do I update to the latest firmware safely and root it?
Alternatively, how do I get rid of the prompt each time I turn WiFi on?
Can I take an image of my phone as it is and revert back to it at any time, and if so, how?
I really don't know what I'm doing and help would be appreciated.
If you're looking to update to NPJ25.93-14 via OTA, you'll need to unroot and flash a stock recovery (and stock logo.bin if you hid your bootloader warning), else the OTA will not install. Of course, this will remove root and TWRP until you've updated. Also, bear in mind after the update there's 2 more security patches (March and June 2017)
Before attempting anything though, ensure you've got a backup of your data (including a TWRP backup of your device as it is) and move them off your device until you're completed.
If you don't have access to a stock recovery/logo.bin, you could use a stock fastboot ROM to bring you up to date - this will remove root and TWRP however. The latest fastboot ROM we have is the March 2017 build: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
If you wish to update with the fastboot ROM (so bringing you up to the March 2017 build), you may wish to use the following fastboot commands, which will replace your recovery and remove root, but should not affect your data (however as with anything that affects your system, ensure you have backups regardless)
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
This fastboot ROM will formally update your device completely to NPJS25.93-14-4 (March 2017), but using these commands you will not have locked your bootloader. You may wish to wait for the June security patch (since OTA updates require a stock recovery, stock kernel and stock system) or proceed to rooting.
If you wish to root on Nougat, follow either: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918 or https://forum.xda-developers.com/showpost.php?p=72496111&postcount=270 Please ensure that you flash a custom kernel before rooting on stock - Motorola - Nougat on Moto G4/Plus devices.
If you do not wish to fastboot a stock ROM, you could flash a TWRP flashable of the March build. This will not update your bootloader, or GPT partitions (so will not completely update your device to the March build), but is a nice shortcut. Again, this will remove root (but not TWRP) and so you will have to re-root as for Nougat. https://forum.xda-developers.com/moto-g4-plus/how-to/fxz-flashable-stock-npjs25-93-14-4-t3623010 for the TWRP flashable. This will also require you to flash the modem TWRP flashable file (included in the thread) as your fingerprint sensor may not work properly otherwise.
If you don't wish to update, and just want to disable the notification, have a look here: https://forum.xda-developers.com/mo...ble-notification-update-t3459587/post73005893
Thank you very much for the detailed answer. I have tried my best to understand the scene as best I can, but remain unfamiliar with the various approaches.
I have made a backup of my SD Card and used TWRP to create a backup of partitions: System (1983MB), Data (3459MB) and Boot (16MB) and transferred them to my PC
I am able to restore to my old 6.01 configuration with this backup I made provided I have an unlocked bootloader right?
To follow the guide you linked for rooting Android 7.0: https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Am I correct in saying I would need to unroot my 6.0.1, re-lock the bootloader and then update to the latest firmware via OTA updates? You say to "flash a custom kernel before rooting" but I don't know what this means or how I would do it.
Alternatively, I see the June security patch came out today. Would this be an easier or better way to update than the above method?
I don't know if you'll be able to revert back to your old 6.0.1 TWRP backup once you've updated to Nougat, as the modem and other firmware would be newer than 6.0.1. Additionally, if you've updated to the June update, be very careful about downgrading by flashing a stock ROM as the bootloader has been updated in this update, and attempts to downgrade the bootloader and GPT seem to result in bricking of devices (though TWRP flashes do not care about the bootloader and GPT usually, so you may be okay in that regard).
As for the procedure for updating, you do not have to re-lock your bootloader if you desire root later. Bootloader lock status does not appear to affect OTA updates/installations - only the presence of a non-stock recovery, system or kernel will cause the update to abort. Re-locking for your purpose, unless you're wanting to send your device for service or to sell it, is unnecessary so leave it unlocked. The unlocking instructions in the guide are only there if you're coming from a device with a locked bootloader. If you're going down the OTA route, a general guide would be:
1)Unroot your root manager (following the root manager's uninstall instructions).
2)Flash a stock recovery (and stock kernel) from a stock ROM. Ensure the stock ROM you're using is the same build as what you're currently on. If you've flashed a custom logo.bin to hide the bootloader warning, you'll need a stock logo.bin.
3)Download and flash the OTA update in your stock recovery (should happen automatically).
4)Reboot into Nougat NPJ25.93-14.
5)Accept and download the March update, repeat the install.
6)Accept the June update if it's arrived for you (I've only seen the June update deployed in Brazil and India at the moment, other territories may have to wait), or download and flash the OTA update in stock recovery. The June security patch appears to only flash over the March update.
7)Once you're updated, flash TWRP and back up your entire system again (you may wish to flash a newer TWRP).
8)Flash ElementalX and your root manager as directed in the guides. Ensure the root manager you flash is quite recent - either SuperSU 2.79 SR3 or newer (2.82 SR1 is the latest) or magisk v12 or newer should be okay.
NOTE - you could skip steps 1-5 if you use fastboot and the commands in my previous post with the March 2017 fastboot ROM. You'll be flashing stock copies of the partitions to your device and bring it up to the March 2017 update in one go.
With 6.0.1, you could root after you flashed TWRP - on stock Nougat, the anti-rooting security is much stricter, and attempts to root with the stock (i.e. Motorola, hudsoncm) kernel may cause your device to bootloop. Thus, to get around those security measures, we can flash a custom kernel (i.e. a 3rd party kernel) that doesn't have that security. We have ElementalX v1.04 https://forum.xda-developers.com/moto-g4-plus/development/kernel-elementalx-g4-0-01-t3424836 and vegito v6.08 https://forum.xda-developers.com/mo...ernel-vegito-kernel-1-0-13-september-t3461021 as custom kernels. To flash a custom kernel:
Download the stock version of the kernel (the LineageOS versions are for Lineage-based custom ROMs).
Reboot to TWRP.
Backup your boot partition (this contains your stock kernel)
Go back to 'Install' and tap the kernel zip
Follow the installer instructions to flash (e.g. with ElementalX, I've got stock 1561 MHz, no double tap to wake and none of the options selected on the installer screens).
Wipe cache/Dalvik
Reboot.
After flashing the custom kernel, then you can proceed to rooting on a Moto G4/Plus.
Here's what I ended up doing:
Updated using the March 2017 fastboot ROM and the instructions you provided.
Flashed the June OTA update files
Flashed the latest TWRP (3.1.1.0) over the stock recovery mode
Flashed ElementalX
Flashed Magisk 13.2
So I now have root access and my apps are still there. Unfortunately trying to install any modules in Magisk via the download section result in a "... has stopped working" message. I flashed the uninstaller and installed 13.1 but still no dice. The benefits of Magisk sounded great but I might just install SuperSU tomorrow instead.
I really appreciated your help, thank you very much
tekwarfare said:
Here's what I ended up doing:
Updated using the March 2017 fastboot ROM and the instructions you provided.
Flashed the June OTA update files
Flashed the latest TWRP (3.1.1.0) over the stock recovery mode
Flashed ElementalX
Flashed Magisk 13.2
So I now have root access and my apps are still there. Unfortunately trying to install any modules in Magisk via the download section result in a "... has stopped working" message. I flashed the uninstaller and installed 13.1 but still no dice. The benefits of Magisk sounded great but I might just install SuperSU tomorrow instead.
I really appreciated your help, thank you very much
Click to expand...
Click to collapse
No worries - if you're looking to switch to SuperSU, you'll need to uninstall magisk, then flash your clean stock kernel from your Nougat TWRP backup (flashing just the boot partition from the TWRP backup you made before flashing ElementalX should be okay). Then, you'll have unrooted and have a clean stock kernel - then flash ElementalX and SuperSU.
You'll need a clean stock kernel to remove traces of the previous root - you may have issues with SuperSU otherwise.
I think it was a problem with the way the zip files Magisk downloads are packaged, I can get them to install if I repackage the zip file.
Unfortunately, I never realised the xposed framework isn't supported on Nougat yet. I had a lot of quality of life tweaks that are greatly missed. Do you know if it's possible to safely downgrade back to Marshmallow at all?
I found this guide: https://forum.xda-developers.com/moto-g4-plus/how-to/how-to-downgrade-nougat-to-marshmallow-t3487201
But comments mention about future OTA updates maybe bricking the phone and "When come back from nougat to marshmallow don't flash gpt and bootloader , and flash everything else.".
Yeah, it might be that the modules haven't been updated for the latest magisk v13.2 yet.
Honestly, I do not know if it's safe to downgrade - with the June update, a critical security vulnerability was patch, and from what I've observed, attempts to downgrade have resulted in bricks. From what I understand, this seemed to result from users downgrading their GPT and bootloaders. You may be able to downgrade from Nougat to MM if you omit flashing the GPT and bootloader partitions (as mentioned in the guide you found), but there'll be a mismatch between your bootloader (Nougat) and your system (Marshmallow). Thus, for that reason, I'd suggest to not accept OTAs whatsoever. Again, I do not know if this is safe since the June update and I do not want to suggest things that might damage or ruin your device - it's your device, however.

Problems after rooting Mi A1 (using TWRP stable build reloeased today)

Okay, so I rooted my Mi A1 with the help of Dhananjay Bhosale's video uploaded today.
Everything worked fine until I discovered that I couldn't install OTA updates. Pretty common thing for rooted devices (although somewhat disappointing). But the weird thing is, I was on the September security patch while installing this update but then when I booted into the system after everything was done and dusted, a notification showed that the system was finishing up with installing the August update and that the September update was still to be downloaded and installed. So I did that but the system failed to install it.
Then I checked XDA and Dhananjay, in his XDA account, has suggested that OTA updates could be installed by switching partitions (new thing in Android N). So I did that, redownloaded the September patch and everything installed just fine but then I realized that there were no root privileges in this particular partition. After some effort, I somehow re-entered recovery and switched back to the other partition, hoping that the update would stick. But it didn't. As soon as I rebooted back into system, there was that notification again (finishing up the August update and telling me to download the September patch).
So basically, I am back to square one.
Anyone knows how to break out of this vicious circle?
anirbannath said:
Okay, so I rooted my Mi A1 with the help of Dhananjay Bhosale's video uploaded today.
Everything worked fine until I discovered that I couldn't install OTA updates. Pretty common thing for rooted devices (although somewhat disappointing). But the weird thing is, I was on the September security patch while installing this update but then when I booted into the system after everything was done and dusted, a notification showed that the system was finishing up with installing the August update and that the September update was still to be downloaded and installed. So I did that but the system failed to install it.
Then I checked XDA and Dhananjay, in his XDA account, has suggested that OTA updates could be installed by switching partitions (new thing in Android N). So I did that, redownloaded the September patch and everything installed just fine but then I realized that there were no root privileges in this particular partition. After some effort, I somehow re-entered recovery and switched back to the other partition, hoping that the update would stick. But it didn't. As soon as I rebooted back into system, there was that notification again (finishing up the August update and telling me to download the September patch).
So basically, I am back to square one.
Anyone knows how to break out of this vicious circle?
Click to expand...
Click to collapse
Similar with me, I have Sep build in slot A and Aug build in slot B. I'm not able to install the Oct build.
sunshinebhushan said:
Similar with me, I have Sep build in slot A and Aug build in slot B. I'm not able to install the Oct build.
Click to expand...
Click to collapse
mine also any sol to fix this?
Steps to fix any root mess-up that might happened and/or corrupt system from tampering with files.
1. Follow this guide, you can start from the flashing part
2. Download the mi flash app + a1 fastboot stock rom
3. Flash using the guide, make sure you select 'save user data'! or you will lose all your data!!
4. Once the flashing is complete you will reboot into the august patch, go to updates and install all the updates as usual
5. Root/Flash recovery using your favorite method.
I played around the system partition too much and had some issues with play services, also I couldn't update to october patch, after doing the above, everything works great. just use this guide anytime you want a clean slate.
Also always backup everything on twrp, always a useful thing to do.
Good luck
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Ex-Hunter said:
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Click to expand...
Click to collapse
I used AIO tool with patched boot.img then flashfire for SuperSu.
For me, the oct update is not getting installed at the first place
sunshinebhushan said:
I used AIO tool with patched boot.img then flashfire for SuperSu.
For me, the oct update is not getting installed at the first place
Click to expand...
Click to collapse
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Ex-Hunter said:
I didn't have any such problem. This is what I did: I was on Sep patch on 'b' rooted with magisk --> installed Oct ota update --> rebooted --> rebooted to twrp, flashed magisk 13.4. and rebooted to system --> everything works.
BTW how did you get root; CF-auto root or Magisk?
Click to expand...
Click to collapse
Hi. As I mentioned, I am not even on the September patch. I used to be but then I rooted it today (installed Magisk) and suddenly I'm back to the August patch. September patch only installs in 'a', which is not rooted. That doesn't really serve my purpose.
Ex-Hunter said:
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Click to expand...
Click to collapse
Hi. There seems to be a problem with what you suggest. The video I followed does almost the same thing. I even have TWRP, along with Magisk of course. The problem is, when I boot to 'a' (the partition that successfully installs the September update), I find that it isn't rooted. Magisk is inactive. And root checker says that root isn't properly installed. So obviously, the question of unrooting is rendered moot.
I want to be able to install the OTA update in my rooted partition and make it stick. People have installed OTA updates to rooted ROMs (mostly using FlashFire), but Flash Fire is giving me an unusual error, something about being unable to install OTA even though it has detected it due to being unable to find some files in boot/recovery folder or something like that.
@anirbannath
Just to be clear, when you reboot to system which partition and which patch are you in?
Ex-Hunter said:
@anirbannath
Just to be clear, when you reboot to system which partition and which patch are you in?
Click to expand...
Click to collapse
@Ex-Hunter
I think I should update a little bit : I tried rooting both the partitions and what I saw was that I am on September patch on both of them now. However, the problem still persists albeit in a slightly different manner. Currently I am on partition 'a' because the WiFi is having some weird problems in partition 'b'. So now I have the update notification for the October security patch but after downloading, the system gets stuck on Step 1 of 2 of installing the update. I guess, side-effect of rooting. But this isn't the issue.
I found out that the real problem is the FlashFire app. Since I have downloaded the October patch and rooted both partitions, I had hoped that FlashFire would work now, but that same error persists (which is something like Update Engine binaries could not be found, so update cannot be handled - I have asked a separate question about that, if you would be so kind as to go to my profile and check it out).
I got bootloop when installing october security patch......
I have unlocked bootloader and also rooted my phone using CF-auto-root but when try to install october security update after reboot my phone got bootloop.....
So, what do i do now ?
anirbannath said:
@Ex-Hunter
I think I should update a little bit : I tried rooting both the partitions and what I saw was that I am on September patch on both of them now. However, the problem still persists albeit in a slightly different manner. Currently I am on partition 'a' because the WiFi is having some weird problems in partition 'b'. So now I have the update notification for the October security patch but after downloading, the system gets stuck on Step 1 of 2 of installing the update. I guess, side-effect of rooting. But this isn't the issue.
I found out that the real problem is the FlashFire app. Since I have downloaded the October patch and rooted both partitions, I had hoped that FlashFire would work now, but that same error persists (which is something like Update Engine binaries could not be found, so update cannot be handled - I have asked a separate question about that, if you would be so kind as to go to my profile and check it out).
Click to expand...
Click to collapse
Thanks for clarifying. It is interesting that you are on Sep patch on both the partitions. IMO the sure shot way of solving your problem would be to go back to stock and root using Magisk.
Follow the "Flashing Guide for Fastboot Update"guide. Download the Sep fastboot rom for Step 2; Select 'clean all' for Step 5 but do note that it will wipe all user data. Now you will be on stock sep rom on slot a. You'll get OTA notification for the Oct patch, go ahead and install. After rebooting you will be on stock oct rom on slot b.
After finishing, download TWRP and Magisk from here or you can download this package, I have included recovery and Magisk. Copy Magisk-v13.4.zip to your device.
Go to fastboot mode and verify that you're unlocked and all drivers are installed.
While in fastboot type
Code:
fastboot getvar all
You can see which slot is active.
I suggest you NOT to flash TWRP but boot to it instead.
To do so type
Code:
fastboot boot recovery.img
In a few secs you should be in TWRP. If you're not booting into TWRP disconnect the device and switch off; Press vol down button and connect the USB. You should now be in fastboot mode. Try typing the cmd again and it should work.
Flash Magisk-v13.4.zip via TWRP.
Reboot to system
Download the latest Magisk Manager and install. DO NOT update Magisk.
Download and install as usual when the next OTA update arrives. You will lose the root when you reboot. But no worries, just reflash Magisk-v13.4.zip via TWRP and you will be good to go.
P.S. @ topjohnwu is working to get official magisk on our device. When that arrives you will be able to patch Magisk to the OTA update without going to TWRP.
Ex-Hunter said:
The AIO tool uses CF root. Normally you FlashFire would be able to capture the OTA update and flash it but some have reported that it's not happening for our device. IMO you can do one of the two things.
You can do what @sooti suggested till step 4 and then root using Magisk and TWRP. Refer here.
Or
You can find which partition has sep update installed; reboot to it and unroot SuperSU; flash stock sep boot.img and install oct OTA update. After that follow this to get root.
BTW you don't need to flash TWRP; just boot to it and flash Magisk to get root.
Click to expand...
Click to collapse
I followed the steps you mentioned, all went well thanks for that. But couldn't edit build.prop with this root method tried with ES explorer (previously with CF root it was successful)
sunshinebhushan said:
I followed the steps you mentioned, all went well thanks for that. But couldn't edit build.prop with this root method tried with ES explorer (previously with CF root it was successful)
Click to expand...
Click to collapse
Go to Magisk Manager>Menu>Superuser; Check if the switch is ON for ES explorer.
You can also try Amaze file manager. Its completely FOSS. Go to Amaze>menu>Settings>Root Explorer and switch ON.
Edit: BTW you're not editing build.prop directly,are you? You can't do that for systemless root.
Ex-Hunter said:
Go to Magisk Manager>Menu>Superuser; Check if the switch is ON for ES explorer.
You can also try Amaze file manager. Its completely FOSS. Go to Amaze>menu>Settings>Root Explorer and switch ON.
Edit: BTW you're not editing build.prop directly,are you? You can't do that for systemless root.
Click to expand...
Click to collapse
I am trying to edit directly, what is the other way to edit?
sunshinebhushan said:
I am trying to edit directly, what is the other way to edit?
Click to expand...
Click to collapse
You've to use resetprop tool for that. You can modify an existing module or put a script at /magisk/.core/service.d (I think.... haven't done that in a long while). You can ask magisk related queries here (unofficial magisk 13.4) or here (official)
Ex-Hunter said:
Thanks for clarifying. It is interesting that you are on Sep patch on both the partitions. IMO the sure shot way of solving your problem would be to go back to stock and root using Magisk.
Follow the "Flashing Guide for Fastboot Update"guide. Download the Sep fastboot rom for Step 2; Select 'clean all' for Step 5 but do note that it will wipe all user data. Now you will be on stock sep rom on slot a. You'll get OTA notification for the Oct patch, go ahead and install. After rebooting you will be on stock oct rom on slot b.
After finishing, download TWRP and Magisk from here or you can download this package, I have included recovery and Magisk. Copy Magisk-v13.4.zip to your device.
Go to fastboot mode and verify that you're unlocked and all drivers are installed.
While in fastboot type
You can see which slot is active.
I suggest you NOT to flash TWRP but boot to it instead.
To do so type
In a few secs you should be in TWRP. If you're not booting into TWRP disconnect the device and switch off; Press vol down button and connect the USB. You should now be in fastboot mode. Try typing the cmd again and it should work.
Flash Magisk-v13.4.zip via TWRP.
Reboot to system
Download the latest Magisk Manager and install. DO NOT update Magisk.
Download and install as usual when the next OTA update arrives. You will lose the root when you reboot. But no worries, just reflash Magisk-v13.4.zip via TWRP and you will be good to go.
P.S. @ topjohnwu is working to get official magisk on our device. When that arrives you will be able to patch Magisk to the OTA update without going to TWRP.
Click to expand...
Click to collapse
I have updated magisk in Mi 1 and now I am not able to boot my mobile...it just restart and also not able to boot into TWRP...only it's boots into fastboot mode but PC shows waiting for device...wat to do plz help
kiran8631 said:
I have updated magisk in Mi 1 and now I am not able to boot my mobile...it just restart and also not able to boot into TWRP...only it's boots into fastboot mode but PC shows waiting for device...wat to do plz help
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74203817&postcount=4
by flashing with flashfire rooted and installed supersu without twrp flash and now wifi stopped working rest everythig works just fine..for now i m back2stock...can any one tell me the most safe procedure wich do not break any drivers. i m on 1st october patch. thank you in advance

ZE520kl OTA upgrade doesn't work

Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
bibile said:
Hi,
I've downgraded my phone ZE520KL couple months ago but I've forgotten that VOLTE is only available on 7.0...
I've recieved the OTA notification, downloaded the package on the phone, but when it reboots it is going on TWRP & then if I'm rebooting it doesn't continue the upgrade process.
What am I missing? (on my previous phones this wasn't so tricky...) Should I use the Install method directly from TWRP? If Yes on which zip? Is it possible to find the one that I've downloaded directly with my phone?
Click to expand...
Click to collapse
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
[email protected]@ said:
Same like me before. Have you rooted your phone yet? if yes then try this, it work for me though (Backup your phone is recommended)
1. Download busybox, supersu and no-verity file
2. Using flashfire app, choose flash zip or ota option
3. Add ota 'WW-ZE520Kl-.....'
4. Add firmware 'UL-ASUS-....'
5. Remove tickmark from 'Inject supersu'
And flash, it will reboot but do not boot to system. You must boot to twrp, flash no-verity file, busybox and supersu or your phone will not boot. Then reboot, done.
If this method is helpful, do reply to me
Btw, sorry for my poor english.
Click to expand...
Click to collapse
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
vEEGAZ said:
Thanks, works wonderfully! Flashfire flashed the new OTAs successfully but the phone didn't then boot (or it bootlooped). A quick Google search led me to your response and the dm-verity file fixed the boot!
I also didn't flash Busybox in case you needed to know and before flashing the OTAs I checked the "Automount" and "Mount systeam as R/W" in Flashfire otherwise the app would just get stuck in a blank screen.
EDIT: WiFI isn't working, tried already deleting the files in /data/misc/wifi, /persist and /data/misc/dhcp as suggested in various threads but still nothing. Anyone know how to fix it before I attempt to do a full backup and wipe?
Click to expand...
Click to collapse
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
[email protected]@ said:
Deleting files in /data/misc is not helped. Try this:
1. Check your selinux permissive or enforcing. If permissive, you should re-root your phone. Remember to flash busybox too or it will may some crash. Still not working follow step 2.
2. Re-flash the ROM using twrp. No data will be lost. Don't forget to re-root or it will not boot.
3. Try the lastest fw .68 or .75 though someone told that the .28 ota file had issue on wifi.
Click to expand...
Click to collapse
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
vEEGAZ said:
Reflashing through TWRP worked Although I did it after backing up all the apps and did a factory reset which didn't even fix the wi-fi problem. But then Flashfire is useless if TWRP is capable of flashing OTAs right?
Click to expand...
Click to collapse
Not really. Since OTA file can't flash through twrp. It really annoying for someone (like me ), so for the easiest way is just flash it using Flashfire, no need to use computer to flash stock recovery .
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP every time there's an update.
wang1chung said:
@vEEGAZ
yep, that's what I've been saying for months. I've never used anything but TWRP to flash my phone. I've downgraded, gone custom and back to stock many times.
@[email protected]@
I flash OTA's through TWRP everything there's an update.
Click to expand...
Click to collapse
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
edit your updater-script and it'll flash no problem.
[email protected]@ said:
When my phone still in 6.0.1, flashed OTA's throgh twrp it said 'not correct phone...' but after upgraded 7.0 it succeeded although i don't need it anymore.
Click to expand...
Click to collapse
Yeah that's what I encountered aswell back 2-3 years ago, I remember I couldn't flash any OTAs via TWRP but apparently now you can. That's why I also used Flashfire in the first place but after running out of all options for the wi-fi problem I decided to give TWRP a try et voilà, it worked
wang1chung said:
edit your updater-script and it'll flash no problem.
Click to expand...
Click to collapse
I've tried that and still not working.
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
wang1chung said:
@[email protected]@
I JUST did it....on 1711.75 now. There was no recovery partition update either so I didn't have to reflash TWRP after :good:
I did have a bootloop issue after but fixed that by flashing the no-verity file. I'm not sure if that's related to having magisk installed though.
Click to expand...
Click to collapse
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
[email protected]@ said:
1. After reflashing rom through twrp, i lost my twrp. Oh, but when i use Flasfire, it isn't lost.
2. Not sure but after flashing ROM your boot will change to normal so it may not related to magisk or supersu. Maybe it beacause of the twrp, i've tried reflash stock recovery once and i can updated it without flash no-verity file though i've installed magisk.
Click to expand...
Click to collapse
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
wang1chung said:
1. You will only lose TWRP if there is a recovery partition update in the stock firmware, yes, but that doesn't happen with every update. I think I read of a way to block it from updating the recovery partition but can't find the article right now. If flashfire works, use it, I just like TWRP for the other features like making and restoring nandroid backups.
2. I dirty flashed the update again through TWRP, verified the bootloop issue and then installed magisk (through TWRP) and it resolved the bootloop issue. No-verify file not required.
Click to expand...
Click to collapse
1.Ok, i got it.
2. The way using TWRP is keep the root ( root or not boot) and stock recovery is contrary ( can't root but will boot) or just flash custom kernel through twrp (not root required).
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
bibile said:
simple question :
- you are talking about OTA & Firmware...
I've downloaded again from asus website Version WW-V14.2020.1711.75 (I assume it is the latest firmware). Are you simply giving the example of an OTA that is released post the firmware version I have to install to have the 7.0 base?
Or is it anything that I'm missing...
From your explanations I should only :
- install flashfire
- flash the latest firmware
- boot into TWRP & flash no verity
- reboot the system
Right?
Click to expand...
Click to collapse
Yep, you can also flash the latest .zip via TWRP instead of using Flashfire, it's 100% working for me. Just REMEMBER to flash the no-verity file otherwise you'll end up in a bootloop.
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
ktl20 said:
I have newest oreo fw from asus website. Ive unlocked bootloader with official app. Now i want WTRP and root with magisk. I want to know how to flash updates to get all wroking?
1. Flash TWRP via fastboot?
2. Flash Magisk via TWRP?
3. When update will release i must flash whole fw from asus website with TWRP and then no-verity file to boot?
4. Or can i use flashfire app to flash fw from asus website and then no-verity zip?
What is the best solution to have updated system without use PC? Step by step guide will be great THX
Click to expand...
Click to collapse
iamROOTX said:
Im confuse.
Im using 1711.75 with magisk 15.3 and twrp 3.2.1.0
I have the full firmware of initial oreo
I just have to install flashfire
Flash the full firmware oreo that i have then rboot to twrp to flash no verify zip?
Click to expand...
Click to collapse
The safest and true way to flash any ota update without any issues by using stock recovery, don't use twrp or flashfire or any other apps.
follow the steps below:
1. When you are rooted and twrp installed, to getback to full stock boot and recovery without wiping data, flash the latest raw image available. For oreo the latest available one for ze520kl is WW_ZE520KL_15.0410.1712.31_M3.10.47.16_Phone-user.raw.zip.
2. Now flash the ota update available normally via stock recovery.
3. Flash oreo support twrp-3.2.1-0 and magisk zip.
4. Done.
I'm periodically upload the latest available ota update for ze520kl in the ze520kl ota update links thread.
Here is the latest one.

Re-Rooting 1+5 after OS 5.1.1 Update

So I tried updating to Oxygen is 5.0 ran into an install issue, stuck in boot loop. Lucky I had done a Nandroid back up and restore everything. The other night I decided to update to 5.1.1 thinking why not get Android 8.1.0 on my AWESOME phone. Downloaded update, placed in internal storage, booted into TWRP to do a Nandroid back up (due to issues with past update). Back up failed needed to clean drive. So I decided, phone works in Android 7.1.1, why can't what's not broken. Rebooted phone and somehow the update activated. I freaked since last time it failed and not stuck in a loop. This time update was successful but still got stuck in a boot loop. I plugged my phone to my computer and noticed all my files were gone on their install storage, no files / foldersI recognized (e.g. DCIM, DATA, DOWNLOAD, etc). Emailed One Plus and chatted with them. TWRP was gone and was back on stock recovery. Since all was lost I was asked to "Erase All". I did, rebooted and I'm now on 8.1.1 but all my stuff was lost. So I've done since searching and found FlashFire do to a Nandroid backup but need root. So my question is...
Can I re-root my phone without using TWRP but stock recovery and use FlashFire for my back ups? I am not going to flash custom ROM but if I need to flash something, wouldn't stock ROM flash anything on my phone (Magisk)?
If so, can anyone provide me with assistance on re-rooting my phone without TWRP.
Thank you
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Hi
To root your OnePlus 5, you must to follow carefuly the steps below and take your time.
1 - Make a full backup of your data
2 - Unlock the bootloader (Note that'll erase your phone)
3 - Install another recovery : TWRP. This one : https://sourceforge.net/projects/ch...-20180414-codeworkx-cheeseburger.img/download
4 - Flash the full rom Oxygen OS 5.1.1 : http://otafsg.h2os.com/patch/amazon...23_OTA_034_all_1804201219_3824995916a49ee.zip
5 - Install magisk : https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
6 - Clear cache / Dalvik
7 - You're all done, reboot the phone
8 - Once your phone has booted up, install magisk manager : https://github.com/topjohnwu/MagiskManager/releases/download/v5.7.0/MagiskManager-v5.7.0.apk
Check this tread, that'll help you as well : https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
vanzant83 said:
As far as i know you can't flash anything with stock recovery so you can't root. After flashing the stock os is normal that twrp is been erased by the stock. Just re flash the twrp. I mean, maybe i didn't get the problem, why you can't reflash twrp? If you do that flash twrp codeworx Universal with fastboot in the bootloader, boot in twrp, wipe cache/dalvik, flash magisk 15.3, wipe cache/dalvik, reboot system, update magisk to 16 with the app. I do that way and it worked
Click to expand...
Click to collapse
Hello, thanks for the info and yes, I did try flashing Magisk with stock recovery, while waiting for a reply and can confirm installation failed. So if I reflash TWRP, flashing Magisk using TWRP will work. Therefore, do you have instructions (step-by-step) on how to install TWRP. I have downloaded the latest TWRP image from their website (twrp-3.1.1-1 cheeseburger) onto my desktop. Bootloader is already unlocked as I was previously rooted under Android 7.1.
Thank you.
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
vanzant83 said:
https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-unlock-bootloader-flash-twrp-t3624877
This is the official guide step by step, scroll down until you find "flashing twrp" if you had already unlocked the bootloader ( you already did that right??? xD). Anyway about the recovery and magisk version. The guys in the 5.1.1 thread advised to flash magisk 15.3 instead the 16 and only after the system reboot to make the upgrade to 16 with magisk app (dunno why). But when i tried to do that the last version of twrp (3.1.1-1) failed the flash. So i flashed the twrp 3.1.1-0-universal and 15.3 magisk. I can confirm this combination work, i can't tell for other combinations.
Click to expand...
Click to collapse
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
jmoricone said:
Hello, I finally got some time to re-root my phone and was reading the instructions you provided and clicked on the download but they are TWRP 3.2.1.x and Magisk 16. Do you have the links for the files you used
Grazie
Click to expand...
Click to collapse
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Try this link, get the ZIP file from the version you want: https://github.com/topjohnwu/Magisk/releases/
In case you need, this the official section: https://forum.xda-developers.com/apps/magisk
vanzant83 said:
Sorry man i typed wrong, the one i meant was 3.2.1-0 Universal codeworkx, the fourth from up to down. About 15.3 magisk i dunno where you can find It, maybe try some google research, otherwise i can send It to you by email, is a little file
Click to expand...
Click to collapse
Hey there, sorry for the late response..but thank you for the assist..phone is rerooted..all is good..thanks again

Categories

Resources