I thought that is better to have all the firmwares we found here or all over the internet gathered in one place
So here you can access them:
mtk6260A & mtk6261DA - link
mtk2502A - link
mtk2502C - link
Before flashing a firmware it wouldn't be so bad to read some things about - link -
-
useful
I am trying to learn about my hack job smartwatch that I bought off amazon. will your firmware help me to get into the device? there isn't any "debugging usb" options on the device and I would love to change the OS if possible. Hell, I'd even pay to have it done. all the information I know about the watch can be found here: http://forum.xda-developers.com/smartwatch/other-smartwatches/smartwatchme-q10-mtk6260-t3314149
adamrduff said:
I am trying to learn about my hack job smartwatch that I bought off amazon. will your firmware help me to get into the device? there isn't any "debugging usb" options on the device and I would love to change the OS if possible. Hell, I'd even pay to have it done. all the information I know about the watch can be found here: http://forum.xda-developers.com/smartwatch/other-smartwatches/smartwatchme-q10-mtk6260-t3314149
Click to expand...
Click to collapse
Man, remove from your thread post "Smartwatchme Q10 MTK6260" that thing about "proprietary Android", because guess what, it is not, the OS is known as RTOS Nucleus and is proprietary Mediatek and for sure is not an open source, hence, in this case the ONLY way is to get a hex editor, a programming envinroment, patience and wiling, you find here tons of firmwares to study!
And don't forget, helping others is the best way to learn!
Edited my post, Thanks!
Update Mar-12/2016: as long as on the market appeared a long line of new types of mtk6260 mtk6261 mtk2502C mtk2502A (etc) watches equipped with strange new PCB or flash_ID parameters, the new release <Readback Extractor mtk 2.0> now has the capacity to identify, to read, check, rebuilt firmware and collect and insert in the .cfg files the flash_ID's coded inside the ROM dump for almost all types of mtk watchphones or smartwatches based on RTOS Nucleus
how can install a new firmware on my dz09? every time show me error "META ERROR: error bootrom communication"
please help me please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any one can help me with this problem http://prntscr.com/afi2v7
please step by step
i am a noob with smartwatch
please help !!!!
thanks in advance !!!!!
angel4o said:
how can install a new firmware on my dz09? every time show me error "META ERROR: error bootrom communication"
please help me please
any one can help me with this problem http://prntscr.com/afi2v7
please step by step
i am a noob with smartwatch
please help !!!!
thanks in advance !!!!!
Click to expand...
Click to collapse
Do a RAM test (make sure is just RAM checked) and put here the results
Make sure before anything that watch is turned off and you connect it to usb at at least 5 seconds AFTER you press start
how to test RAM ?
when i tested results is the ....... http://prntscr.com/afk00l
angel4o said:
how to test RAM ?
when i tested results is the ....... http://prntscr.com/afk00l
Click to expand...
Click to collapse
It looks like it sees the com, run flash tool as administrator under xpsp3 compatibility (or lower)
What version of flash tool you're using? did you try 5.15.16?
link flash tool
how i test RAM?
when i test, result is the ..... http://prntscr.com/afkouv
my chip is ...... http://prntscr.com/afkrz5
angel4o said:
how i test RAM?
when i test, result is the ..... http://prntscr.com/afkouv
my chip is ...... http://prntscr.com/afkrz5
Click to expand...
Click to collapse
Right, you have a clone of dz09 - mtk6261 with just 4Mb in NOR flash, I bet the seller didn't tell you about this
Load scatter file from here. and do the test again, it has to work now
Whatever, you cannot find for your watch too much (in fact nothing - let it as it is, doesn't support any mods as well), they have transformed U watches in DZ09ish clones in order to sell those PCB's nobody wants
Ask for a refund, for same money you can get a normal DZ09 ($17. . .$24)
Golem_ said:
Right, you have a clone of dz09 - mtk6261 with just 4Mb in NOR flash, I bet the seller didn't tell you about this
Load scatter file from here. and do the test again, it has to work now
Whatever, you cannot find for your watch too much (in fact nothing - let it as it is, doesn't support any mods as well), they have transformed U watches in DZ09ish clones in order to sell those PCB's nobody wants
Ask for a refund, for same money you can get a normal DZ09 ($17. . .$24)
Click to expand...
Click to collapse
http://prntscr.com/aflkcc
angel4o said:
http://prntscr.com/aflkcc
Click to expand...
Click to collapse
This is good, in this case it is a clone rolling a better firmware (on 8Mb) - check one of these as initialization scatter - link -
I installed this https://drive.google.com/folderview...&usp=sharing&tid=0B_hRh3DjuBoeblBsakZfUWFCeGM (first firmware) and get installed is normal, but turn the clock back throw-ins respond display
I oredvid if pressed top icon opens lower
angel4o said:
I installed this https://drive.google.com/folderview...&usp=sharing&tid=0B_hRh3DjuBoeblBsakZfUWFCeGM (first firmware) and get installed is normal, but turn the clock back throw-ins respond display
I oredvid if pressed top icon opens lower
Click to expand...
Click to collapse
Man, you didn't do a readback before to flash something??? OUCH!!!
Yes, most of the firmware are not compatible because your watch own different hardware!
We were at the memory test and you jumped directly to flashing stage! - look at my previous post
i did it
i install the last firmware and everything is good
thanks for your help for me
thanks again
good day bro
angel4o said:
i did it
i install the last firmware and everything is good
thanks for your help for me
thanks again
good day bro
Click to expand...
Click to collapse
check that you can replace your watchfaces (check on my threads the one about watchfaces)
Firmware (ROM) GT08 [BUILD TIME] 2016/01/05 15:48
Hello , someone has to send me the firmware MTK6260 GT08 ?
Follow the informations:
LD99_GRD
(G08_IOS)_7789V
(LAIBAO)_BF3A01_V3.7
[BRANCH]: 11BW1308MP
GPLUS60A_6464_11B
BUILD: BUILD_NO_SERIAL#:
[BUILD TIME] 2016/01/05 15:48
[MRE VERSION] 3100
HAL_VERNO
Thank's.
MAGNODECASTRO said:
Hello , someone has to send me the firmware MTK6260 GT08 ?
Follow the informations:
LD99_GRD
(G08_IOS)_7789V
(LAIBAO)_BF3A01_V3.7
[BRANCH]: 11BW1308MP
GPLUS60A_6464_11B
BUILD: BUILD_NO_SERIAL#:
[BUILD TIME] 2016/01/05 15:48
[MRE VERSION] 3100
HAL_VERNO
Thank's.
Click to expand...
Click to collapse
The firmwares in collection is everything we have
Firmware needed for Excelvan aplus GV18
I have flashed a firmware without knowing that there are different firmwares for the aplus GV18. I have taken a normal aplus firmware that worked fine, but I lost my radio of the watch. My original firmware for this aplus GV18 is normaly from the company Excelvan. So I need a Exelvan firmware for my smartwatch. Can someone help me??
Related
I accidentally flashed all partitions with WOLF's fake rom, which has erased my phone. I can find factory roms for the I8750, but I have the Canadian SGH-T889M.
I just need to flash it with some full rom to get it up and running again - anything. Samsung has no full rom, and I think WOLF took down most of his links. Can someone help me get a copy of a Samsung ATIV S T889M rom? Otherwise, I'm stuck with a brick.
TaylorofCanada said:
I accidentally flashed all partitions with WOLF's fake rom, which has erased my phone. I can find factory roms for the I8750, but I have the Canadian SGH-T889M.
I just need to flash it with some full rom to get it up and running again - anything. Samsung has no full rom, and I think WOLF took down most of his links. Can someone help me get a copy of a Samsung ATIV S T889M rom? Otherwise, I'm stuck with a brick.
Click to expand...
Click to collapse
No ROM is leaked for this model. You should go to service center.
There is a safe method to flash customs for carrier models - MBN Creator. I don't know why people still use fakeROMs.
http://mobilefileserver.com/category.aspx?get=24173
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WOLF - You're completely right. I should have used MBN creator. I tried, and it didn't work. I realise now that I probably had to factory reset my phone. If I have to take it to a service center, I may as well just put it in a drawer, because repair costs tend to be crazy, at least in Canada, unfortunately, and I just grabbed an Ativ S NEO on eBay for $200.
Spavlin - Thank you so much for the mobilefileserver link. It's a paid service and it looks super sketchy, but I may sign up. I'll let you know how it goes.
spavlin said:
http://mobilefileserver.com/category.aspx?get=24173
Click to expand...
Click to collapse
that is a link to a rom where you need to pay for , if you have it on your pc maybe upload it to something NON paid.
I have the ROM!
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!
thank you taylor for sharing the rom. its greatly appreciated.
so your ativ is all good now?
oh my goodness! great news! Thanks a lot for sharing this rom!
---------- Post added at 10:06 AM ---------- Previous post was at 09:10 AM ----------
TaylorofCanada said:
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!
Click to expand...
Click to collapse
can you tell us which build is it? 8 or 8.1?
also, which csc file did you use?
TaylorofCanada said:
I have purchased the ROM, and it works!
I just flashed my Telus SGH-T899M. I will send it to anyone who needs a copy of it.
Here is a link for it on mega.co.nz. If anyone ever needs a copy, message me!
Click to expand...
Click to collapse
Hi, could you upload the other files too if you have access to them?
To answer your questions:
- The posted rom is Windows Phone 8.0.
- I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
- I do have access to other files, just let me know what you need and I'll do my best. If you want to help cover the cost of my membership, that's also appreciated; just message me.
TaylorofCanada said:
To answer your questions:
- The posted rom is Windows Phone 8.0.
- I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
- I do have access to other files, just let me know what you need and I'll do my best. If you want to help cover the cost of my membership, that's also appreciated; just message me.
Click to expand...
Click to collapse
pm me your PayPal number and i send you Abit , please dload everything for the ativ s phones , all wp roms and there csc files you can get your hand on.
i have a paid 2tb storage space and i can reupload them there for all to use (on my storage public dload is free)
spavlin said:
Click to expand...
Click to collapse
Sure thing! I'll add it to my list. So what's the binary downloader? Is that just a newer version of the SMD tool?
@TaylorofCanada can you re-post the first two files at http://mobilefileserver.com/category.aspx?get=18865 ?
Also, if you have time. http://mobilefileserver.com/download.aspx?get=253844 would be very useful. With this, I think I can enable Mass Storage mode on the AT&T 8X
compu829 said:
@TaylorofCanada can you re-post the first two files at http://mobilefileserver.com/category.aspx?get=18865 ?
Click to expand...
Click to collapse
Sure, I just need my download limit to reload. Might be a few days at this rate.
WP8 SMD Binary Downloader 3.54
I wasn't able to get it to work with my 8.0 ROM and custom CSC/MBM on my Ativ S Neo. SGH-I187.
TaylorofCanada said:
To answer your questions:
I used WOLF's MBN creator to make a matching CSC - worked marvellously on my Ativ.
Click to expand...
Click to collapse
what did you use for these values in MBN creator on your telus phone?
CSC_Country=0x002C;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=604;
And
[HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
"PhoneROMLanguage"="0809"
o2neouzr said:
what did you use for these values in MBN creator on your telus phone?
CSC_Country=0x002C;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=604;
And
[HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo]
"PhoneROMLanguage"="0809"
Click to expand...
Click to collapse
I never bothered with the Phone Language,
But I changed the country code and the time zone:
Code:
CSC_Country=0x0051;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=2BC;
TaylorofCanada said:
I never bothered with the Phone Language,
But I changed the country code and the time zone:
Code:
CSC_Country=0x0051;
CSC_Operator=0x0000;
CSC_Network=1;
TimeZone=2BC;
Click to expand...
Click to collapse
cool thanks. and what version of windows phone 8.0 is the rom your posted above? GDR2? GDR3?
Hey guys,
I know for a fact that most of you probably wouldn't know about the DZ09 Smartwatch (Chinese clone of the Samsung Gear series?). I've been reading about some topics that indicate a way to use different firmware on this particular watch. One of the topics were found here: niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html
I want to find a way to somehow install Android Wear (or it could be any other firmware) on this smartwatch. I don't know if it can support Android Wear, or any other firmware available. Also, yes, I know this is a Chinese smartwatch that isn't as perfect as it is displayed on websites, but I just want to see what my smartwatch is capable of. In the link posted above, another link is shared for a set of other custom watch faces for the DZ09 smartwatch, which was said to be uploaded to the smartwatch by flashing the smartwatch first, and uploading the set of watch faces to it. Basically, I want to install another firmware on to the DZ09 smartwatch and probably install different watch faces if the first option does not work.
I hope you guys can help me out with this. It seems like a stupid idea to be asking about this, but there could be a possibility of updating my smartwatch.
Thanks! :good:
No android wear for mtk devices. not even for the "bigger" smartwatches which run full android.
tipp: get yourself a http://forum.xda-developers.com/smartwatch/other-smartwatches/k8-3g-round-android-4-4-t3207082 awesome watch!!
BT notifier not downloading?
Try smartwear by mediateck or galapad, search on web for it . or try fundo smart device. I've barcode scanned mine and it worked by downloading but my wife's wouldn't , trying to find an app that will work with her phone and watch.. BT notifers and such don't work . running android 4.4.2, if that helps on lollipop. Maybe there's a setting switch off or something on her phone that's different than mine, we both have the same phones. The zte obsidian.
Please does anyone have the stock ROM file for apro q18 smart watch
Hi! For me, the problem is that I can not APLUS, GT8, install the firmware hours (DZ09). Each window has to be a driver, the flshtool also recognized as a communication tool. Everything is there where you need to browse. Even if it jams on the clock to USB, the program is about. "Counts" for half a minute and then it is an error. The clock shows that it began to take charge. Can you help him? I take pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I Have A Chinese Smart Watch DZ09 How Do I Scan The Bar Code Because Nothing Else Seems To Be Working.
Plz help me becauz when I changed the firmware of my DZ09 SMARTWATCH its touch is not working from then I have tried many other firmwares available on google drive but some of them have inverted colours , inverted screen, half screen and all those whom do not have these problems listed above their touch is not working plzzzzzzzzzzzzzz help me ,you can send reply on [email protected]
Does anyone know how to make this thing run? It does almost nothing when I connect it Bluetooth to my phone. Is there a pc program to flash a update or at least a new working interfaces?
maitrot said:
No android wear for mtk devices. not even for the "bigger" smartwatches which run full android.
tipp: get yourself a http://forum.xda-developers.com/smartwatch/other-smartwatches/k8-3g-round-android-4-4-t3207082 awesome watch!!
Click to expand...
Click to collapse
What if u somehow manage to swap the chipset and make it mt6580 rather than the mt625[(0)(1)][(d(a)][a][m]?
Will i be able to get android on the watch?
Will both the SoCs have the same solder ball structure?
Also will android work without internal storage?
Can i just use sdcard as a storage for them folders needed?
Will the screen be compatible if i flash firmware of qwo9 which runs android 4.1?
Will a "phone" version of android work in the small screen of dz09?
Also if its any useful info, i dont care about camera or sim right now...
Thanks in advance...
Mallay said:
Plz help me becauz when I changed the firmware of my DZ09 SMARTWATCH its touch is not working from then I have tried many other firmwares available on google drive but some of them have inverted colours , inverted screen, half screen and all those whom do not have these problems listed above their touch is not working plzzzzzzzzzzzzzz help me ,you can send reply on [email protected][/Q
inverted display can be fixed search google
Click to expand...
Click to collapse
is it possible to install android img on memory card , force dz09 to read the system and ram from memory card ?
Hello guys, i get new firmware for Junsun V1 PRO 2GB+32GB WIFI - CPU MT8227L from junsun support.
USB disk must be FAT32! If youre using big size disk (more then 32GB) use any program for format FAT32.
FAT32 format program link: Guiformat
Firmware link: UI3 V1 PRO
Enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
VolkMi said:
Hello guys, i get new firmware for Junsun V1 PRO 2GB+32GB WIFI - CPU MT8227L from junsun support.
USB disk must be FAT32! If youre using big size disk (more then 32GB) use any program for format FAT32.
FAT32 format program link: Guiformat
Firmware link: UI3 V1 PRO
Enjoy!
View attachment 5397225View attachment 5397227
Click to expand...
Click to collapse
Hi,
I saw somewhere that by installing the new UI that we would lose access to the pre-installed maps. Is that true?
If yes, is there any way to keep the maps and gps?
bpimentan said:
Hi,
I saw somewhere that by installing the new UI that we would lose access to the pre-installed maps. Is that true?
If yes, is there any way to keep the maps and gps?
Click to expand...
Click to collapse
Just ask your seller. He will provide the links to download the navigation app and several GB with the maps.
On the other side: who wants to use the pirated navigation software?!
I asked the publisher of the GPS app if they know what Junsun is doing there. His answer was that they don't have a contract with Junsun and it's pirated software.
Its works well, i also have link from junsun for 2020q4 maps with install apps if you need.
GPS 20Q4 Map
If you have problem install any app after update try this metode.
Hello Volkmi,
Thanks for sharing the update files, and the precious informations !
I tried to update my head unit by asking the support for the update files, but they gave me some files from Dec-2020 ! (updated anyway, and now I have an issue with google play : I'm unable to login, the login button being unresponsive ...)
So I m looking for a new (and possibly more recent) firmware
I downloaded yours, but there's a 0 octet file (the .upd file)
Could you please share it again ? I'd be awesome !
Thanks, and have a nice day !
babasssys said:
Hello Volkmi,
Thanks for sharing the update files, and the precious informations !
I tried to update my head unit by asking the support for the update files, but they gave me some files from Dec-2020 ! (updated anyway, and now I have an issue with google play : I'm unable to login, the login button being unresponsive ...)
So I m looking for a new (and possibly more recent) firmware
I downloaded yours, but there's a 0 octet file (the .upd file)
Could you please share it again ? I'd be awesome !
Thanks, and have a nice day !
Click to expand...
Click to collapse
Hey baba, what is your radio?
Actualy there is all files you need for update.
Hi Volkmi,
Thanks for the super fast answer !
I bought last month the Junsun V1 Pro 6+128G (with the support for peugeot 508) , I was curious to see in the .zip you shared what looked like a timestamp of Aug 2021, but in the file sent by the support it s Dec 2020.
I asked them if it was the latest FW, they answered "I am sending you the latest firmware", but without link .
I translated that in "I _sent_ you the latest firmware
To be honest, I didn't try your files, seeing the 0 octet .upd file, I jumped to the conclusion that the file was not uploaded correctly !
I'll try after work !
Thanks again
babasssys said:
Hi Volkmi,
Thanks for the super fast answer !
I bought last month the Junsun V1 Pro 6+128G (with the support for peugeot 508) , I was curious to see in the .zip you shared what looked like a timestamp of Aug 2021, but in the file sent by the support it s Dec 2020.
I asked them if it was the latest FW, they answered "I am sending you the latest firmware", but without link .
I translated that in "I _sent_ you the latest firmware
To be honest, I didn't try your files, seeing the 0 octet .upd file, I jumped to the conclusion that the file was not uploaded correctly !
I'll try after work !
Thanks again
Click to expand...
Click to collapse
What a CPU model? This one is only for 8227. If you have other cpu, i am not recommened you install this FW.
Valid point !
It miiiight be a 8259 (the technical details on Aliexpress are not great, but the files the support shared are named 8259-something)
Thx again, you saved me from a headache and/or a bricked HU !
You rock man
Hello friends, I have this radio also with 8227l processor, do you think there will be a problem if I install this software? Thanks
https://es.aliexpress.com/item/4000088935841.html?spm=a2g0s.9042311.0.0.203663c0A65wCt
Tuiranac said:
Hello friends, I have this radio also with 8227l processor, do you think there will be a problem if I install this software? Thanks
https://es.aliexpress.com/item/4000088935841.html?spm=a2g0s.9042311.0.0.203663c0A65wCt
Click to expand...
Click to collapse
Don't install! You will brick your device.
TorstenH said:
Don't install! You will brick your device.
Click to expand...
Click to collapse
Why you say that bro, they have the same processor?
Tuiranac said:
Why you say that bro, they have the same processor?
Click to expand...
Click to collapse
They need to be absolutely identical, not only the CPU.
Hi guys, I feel like taking a chance on installing.
Could anyone install CPU-Z on their radio and show me detailed photos of the hardware components to see if I would dare to install this firmware? I thank you for your cooperation.
Hi, I've just updated my Junsun V1 pro. New UI, a couple of bells & whistles, almost nothing more, except a new app shown both on homescreen & app list. That app is called " junsun Security". Somebody knows the purpose of that app? When launched, it simply asks for a (unknown) code...
Any info about this?
Just another question about new UI: There are 4 themes for choosing, but all 4 are almost identical. Is there a way to upload new themes? I know the alternetive is installing a 3rd. party launcher but, in order to avoid lags, I would prefer to keep original launcher...
Thanks in advance.
does anyone have the september update?
Seggszpir said:
¿Alguien tiene la actualización de septiembre?
Click to expand...
Click to collapse
I need to
Here's the November update. ui 3.0 november
Hello everyone I'm new here and I need help.
Trying to update my stereo and having a error al the time.
I would be happy to help please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, find a match / search by android version (on first picture) on this forum and in youtube videos.
When found appropriate firmware , download and put two unzipped files on USB drive and update manually when you boot up davice (it must detect update, start tapping rapidly on screen till you see message detected, rest is automatic).
It will work?
Assaf. R. said:
It will work?View attachment 5566079
Click to expand...
Click to collapse
It should work 100% just find right firmware
find firmware here: https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/
Anton TNT said:
It should work 100% just find right firmware
find firmware here: https://forum.xda-developers.com/t/collection-of-8227l-firmware-android-vers-6-9.4003935/
Click to expand...
Click to collapse
HI can't find the two unzipprd file
help please
Assaf. R. said:
HI can't find the two unzipprd file
help please
Click to expand...
Click to collapse
Download this zip file from link and unzip this file.
When unzipped, in a folder it will be two files in folder, put them on USB drive and update.
Anton TNT said:
Download this zip file from link and unzip this file.
When unzipped, in a folder it will be two files in folder, put them on USB drive and update.
Click to expand...
Click to collapse
what zip file?
Assaf. R. said:
what zip file?
Click to expand...
Click to collapse
it is in this linked post, but now I see that is broken ... will check for links...
Anton TNT said:
it is in this linked post, but now I see that is broken ... will check for links...
Click to expand...
Click to collapse
Thank you very much friend for the help.
READ HERE FOR UPDATE FIRMWARE (check if your device UI is similar from this picture - do not look by appearance of device, but by AC8227L chipset and UI and android version): https://4pda.to/forum/index.php?showtopic=930058
LINK TO DOWNLOAD (extract from ZIP FILE and put on USB): https://disk.yandex.ru/d/h3aHx5N5zdxy9Q
This firmware should work for your device. You have software dated year 2017 and this is the closest match with date 2018
If this above not applicable to your device will try to find best match.
Similar firmwares are also here : https://4pda.to/forum/index.php?showtopic=1010910 and here https://4pda.to/forum/index.php?showtopic=936535
Anton TNT said:
READ HERE FOR UPDATE FIRMWARE (check if this device in picture is your device - not by m,odel but by AC8227L chipset and UI and android version): https://4pda.to/forum/index.php?showtopic=930058
LINK TO DOWNLOAD (extract from ZIP FILE and put on USB): https://disk.yandex.ru/d/h3aHx5N5zdxy9Q
This firmware should work for your device. You have software dated year 2017 and this is the closest match with date 2018
Click to expand...
Click to collapse
Are you sure it's the same model / data?
Mine says something different (in the pictures above) from what you sent
Assaf. R. said:
Are you sure it's the same model / data?
Mine says something different (in the pictures above) from what you sent
Click to expand...
Click to collapse
I'm not sure , I do not have your device and do not know what UI is in device.
Find the correct firmware in those two links I posted... (by searching YT9216, there are also pics of UI interface for several devices with brand YT)
And I think closest match for your device is here ... https://disk.yandex.ru/d/W-Rft0TkddVn5A
Anton TNT said:
I'm not sure , I do not have your device and do not know what UI is in device.
Find the correct firmware in those two links I posted... (by searching YT9216, there are also pics of UI interface for several devices with brand YT)
Click to expand...
Click to collapse
I have YT9216C UI5
Anton TNT said:
And I think closest match for your device is here ... https://disk.yandex.ru/d/W-Rft0TkddVn5A
Click to expand...
Click to collapse
SEE THIS !
Hello, Please help from forum members to find out what's the difference and what is the purpose of the structure of each image below:
File Structure 1, for what and how to use it?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
File structure 2, for what and how to use it?
File structure 3, for what and how to use it?
Do all Alwinner T3 series headunits (P1-P2) use the same file structure?
Warm regards,
Jack
Jack Sparoh said:
Hello, Please help from forum members to find out what's the difference and what is the purpose of the structure of each image below:
File Structure 1, for what and how to use it?
View attachment 5816995
File structure 2, for what and how to use it?
View attachment 5816997
File structure 3, for what and how to use it?
View attachment 5816999
Do all Alwinner T3 series headunits (P1-P2) use the same file structure?
Warm regards,
Jack
Click to expand...
Click to collapse
the first one you can flash from car setting..the sec one need to flash from android system setting or recovery and the 3rd one is phoenix flash tool.. if u need i can help ya. i already revive my unit.
manixhsss said:
the first one you can flash from car setting..the sec one need to flash from android system setting or recovery and the 3rd one is phoenix flash tool.. if u need i can help ya. i already revive my unit.
Click to expand...
Click to collapse
and last my question, Do all Alwinner T3 series headunits (P1-P2) use the same file structure?
Jack Sparoh said:
and last my question, Do all Alwinner T3 series headunits (P1-P2) use the same file structure?
Click to expand...
Click to collapse
yes all are same just the board have diffrent storage and ram capacity.
are you having any issue with firmware!
and be sure all setting are available in car extra setting with pw :123456
if u change rom and u face any problem like resolution,display brightness, reverse camera,touch button, spund issue etc etc all setting are available in that setting u need to jst enable and change with every option provided there.
manixhsss said:
yes all are same just the board have diffrent storage and ram capacity.
are you having any issue with firmware!
and be sure all setting are available in car extra setting with pw :123456
if u change rom and u face any problem like resolution,display brightness, reverse camera,touch button, spund issue etc etc all setting are available in that setting u need to jst enable and change with every option provided there.
Click to expand...
Click to collapse
Amazing explanation and very educational.
you are great manixhsss
This information from you is really very helpful for colleagues in the forum who have devices from the T3 series.
Once again, thank you.
Warm regards,
Jack
Jack Sparoh said:
Hello, Please help from forum members to find out what's the difference and what is the purpose of the structure of each image below:
File Structure 1, for what and how to use it?
View attachment 5816995
File structure 2, for what and how to use it?
View attachment 5816997
File structure 3, for what and how to use it?
View attachment 5816999
Do all Alwinner T3 series headunits (P1-P2) use the same file structure?
Warm regards,
Jack
Click to expand...
Click to collapse
sir, how you can get .img file?
Nopriady07 said:
sir, how you can get .img file?
Click to expand...
Click to collapse
are you looking for a firmware file in .img format ?
for what brand and type of your device? maybe you can upload a screenshot or photo about your device software or picture of the mainboard of the device.
maybe you can be more specific about your device problem. or try using searching tools in this forum
regard,
Jack
Jack Sparoh said:
are you looking for a firmware file in .img format ?
for what brand and type of your device? maybe you can upload a screenshot or photo about your device software or picture of the mainboard of the device.
maybe you can be more specific about your device problem. or try using searching tools in this forum
regard,
Jack
Click to expand...
Click to collapse
i'm use toparea t3l 1/32gb
Jack Sparoh said:
are you looking for a firmware file in .img format ?
for what brand and type of your device? maybe you can upload a screenshot or photo about your device software or picture of the mainboard of the device.
maybe you can be more specific about your device problem. or try using searching tools in this forum
regard,
Jack
Click to expand...
Click to collapse
Jack Sparoh said:
are you looking for a firmware file in .img format ?
for what brand and type of your device? maybe you can upload a screenshot or photo about your device software or picture of the mainboard of the device.
maybe you can be more specific about your device problem. or try using searching tools in this forum
regard,
Jack
Click to expand...
Click to collapse
Nopriady07 said:
i'm use toparea t3l 1/32gb
Click to expand...
Click to collapse
try read this
Jack Sparoh said:
try read this
Click to expand...
Click to collapse
not working, i can't found .img firmware