TWRP Doesn't work - Galaxy S 4 Q&A, Help & Troubleshooting

I flashed the latest TWRP On my i9505 from Here and flashed a custom ROM "Euphoria"
it's a bit laggy and camera crashes a lot, battery's first enemy and heatseeking missile can track me easily while using my phone...
so i wanted to change the ROM To another one but now i cannot get my phone into recovery mode, every time i go to recovery it restarts the phone, any help installing this new ROM without doing it with the custom recovery? Sorry for making this thread so long to read

The link to twrp is under the 9506 development forum. Not sure if the 9505 and 9506 are able to work with the same recovery.
Try flashing twrp from twrp.me.

Re-flash recovery.
It is obviously not for your device model. Don't even know why it worked in the first place.
Anyway, don't forget to untick auto reboot in Odin.
Or, you could probably use TWRP manager from the play store.

audit13 said:
The link to twrp is under the 9506 development forum. Not sure if the 9505 and 9506 are able to work with the same recovery.
Try flashing twrp from twrp.me.
Click to expand...
Click to collapse
If you're right, i'm afraid to download the wrog model again...
GDReaper said:
Re-flash recovery.
It is obviously not for your device model. Don't even know why it worked in the first place.
Anyway, don't forget to untick auto reboot in Odin.
Or, you could probably use TWRP manager from the play store.
Click to expand...
Click to collapse
this might work, i'll try and let you guys know

tmsftwog said:
If you're right, i'm afraid to download the wrong model again...
this might work, i'll try and let you guys know
Click to expand...
Click to collapse
When i downloaded the TWRP Manager, there was no model for my i9505, i also looked in twrp.me and i found nothing compatible with my device. What should i do? this ROM is killing me!

Isn't the i9505 the international Qualcomm version of the s4?
https://dl.twrp.me/jfltexx/

It is also known as jfltexx.
You can use the tar version and flash it with Odin
Or
You could use the img version and flash it with the app Flashify (Flash as recovery).

Try auto restore

Related

[Q] S4 Bell 1337m wont boot after flash.

Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
BurnAll said:
Hello all, so i've run into a little problem and after a few hours i cant figure out what i did wrong so i reach out for help
i rooted my device successfully with odin and instlal CWM.
booted into recover, wiped data/cache/system/data as the walk through told me
then install a cx rom from here
http://forum.xda-developers.com/show....php?t=2391142
now when i turn my device on it gose stright into downloading mode with "could not do normal boot" in the top right
can any1 tell me waht i did wrong or missed?
oh i can sitll get into recovery
thanks in advanced
Click to expand...
Click to collapse
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
agent929 said:
Did you check the MD5 before flashing? Are you absolutely sure the ROM your flashing is compatible with your device? Were you on the latest MF3 firmware before you started flashing?
Click to expand...
Click to collapse
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
heck at this point i'd be happy just to get it back to normal as its late and i need to sleep and work tomorrow
BurnAll said:
no i did not check the firmware. i missed that very first line.. sigh, but i got my phone when s4's 1st came out dose that help?
and thats another thing thats confusing me, what rom/kernals are compatiable with this phone i've read a bunch of forums but alot of them appear to leave a list out of it.
the one i'm trying to do has my device listed
http://forum.xda-developers.com/showthread.php?t=2391142
Click to expand...
Click to collapse
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
agent929 said:
Anything that says i337 will work on your phone, given that the developer has it bug free (the US ATT Samsung Galaxy S4)
Click to expand...
Click to collapse
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
BurnAll said:
okay so this should work i also put on kernal
http://forum.xda-developers.com/show...php?p=41675354
4.2.2 TW version.
but still saying could no do normal boot, while on downloading screen
Click to expand...
Click to collapse
It says page not found...get the dots out of your link
Did you use your carriers Kernel?
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
agent929 said:
Hey I just noticed that your subject for this post says i337m. Can you confirm if you have a i337 or an i337m please? Thank you.
Click to expand...
Click to collapse
i have the m
BurnAll said:
i have the m
Click to expand...
Click to collapse
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
agent929 said:
It says page not found...get the dots out of your link
Click to expand...
Click to collapse
sorry here it is.
another fella on bell said this one worked for him
http://forum.xda-developers.com/showthread.php?p=41675354
lgsshedden said:
it appears you have flashed an ATT rom for the i337 and not a Rom for the i337m -- you now have several options to restore your phone
1. flash the Loki'd fix to allow the kernel and rom you flashed to boot your phone or
2. flash a cutom kernel that does work with your phone such a Ktoonz kernel (read the install instructions, for your i337m you need the TMO version of his kernel) or
3 download the stock firmware package for your phone, I'd recommend MG1 either from a link on xda or from samMobile or Samsung updates and install using Odin -- this will completely reset you phone and then you can worry about root and custom recovery after
If you do decide to install fresh factory stock MG1 I can recommend using CF-root to root the i337m and then installing Philz Recovery rather than regular CWM as it installs more easily and plays nicer on the i337m in my experience.
Remember each phone is different but do not attempt to install ATT designed roms on your i337m unless you have the loki patch also on your SD card ready to flash also.
There are many great roms available that do fir the i337m and are specifically set up for our phone.
But first, let's get you out of the download loop. EIther of the 3 options above will do. Personally, I would recommend the Odin install of the stock MG1 firmware and start over with a factory reset and a clean phone.
Click to expand...
Click to collapse
okay thanks i'll try to restore it using odin with the MG1 and then give the philz a shot. i'll update u once i've done so.
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
lgsshedden said:
CF root:
http://forum.xda-developers.com/showthread.php?t=2293800
Philz recovery
http://forum.xda-developers.com/showthread.php?t=2201860
Goldeneye Rom:
http://forum.xda-developers.com/showthread.php?t=2313469
stock rooted MG1 rom
http://forum.xda-developers.com/showthread.php?t=2375180
stock firmware download links:
http://forum.xda-developers.com/showthread.php?t=2269304
Click to expand...
Click to collapse
okay got it back to stock, now quick question for the philz do i flash the .tar with odin? or do something else with the .zip?
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
agent929 said:
Its not the ROM that's incomparable its the kernal your using. Find one for a i337m then flash it immediately after you flash your ROM and see if it works.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
---------- Post added at 09:58 PM ---------- Previous post was at 09:58 PM ----------
Zip gets flashed in your recovery.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4
Click to expand...
Click to collapse
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
BurnAll said:
so just to go over the steps to make sure i dont mess this up,
so i flashed to the origonal versoin with odin
that worked
then i rooted it using CF root
now i got 2 files from philz and i'm not 100% sure what to do with them, i got a .tar what i assume i flash with odin and a .zip i'm not to sure what i do with they are both named philz_touch_5.15.0-jfltecan.tar.md5 and philz_touch_5.15.0-jfltecri.zip
then once i get into recovery i know how to flash roms, its just this whole kernal thing thats got me confused.
Click to expand...
Click to collapse
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
READ THIS FIRST:
MAKE SURE YOU DO NOT HAVE THE MF3 FIRMWARE ON YOUR S4. THAT IS THE MOST IMPORTANT THING TO DO RIGHT NOW. IF YOU DO, DO NOT ATTEMPT TO INSTALL A CUSTOM RECOVERY.
You don't have a custom recovery already that's why. Did casual not install TWRP for you? If not try installing Goo Manager from the app market and try installing TWRP that way. MAKE SURE THAT WHEN YOU INSTALL IT, IT SAYS YOUR MODEL NUMBER EXACTLY! I CAN NOT STRESS THIS ENOUGH! When you have TWRP installed, then flash philz with TWRP and you'll have that custom recovery instead.
BurnAll said:
how the heck do i install this philz i boot into recovery and install the zip but i get like 4 red errors when i do it and i still dont have philz
Click to expand...
Click to collapse
do not use the zip you quoted it is not for your phone
use odin flash the tar philz_touch_5.15.0-jfltecan.tar.md5
now you have stock updated MG1 firmware with the latest baseband
root by CF root
Philz Recovery
Now follow the next steps:
1. set up your google account play store etc.
2.next, go into the recovery and do a full nandroid backup -- this gives you a stable base you can restore when needed
3. go flash a custom rom, I highly recommend the latest version of Goldeneye -- updated, well maintained, great developer, clear install instructions
4. try itt then again, use recovery to make a 2nd nandroid, this one of your custom rom install -- try different kernels, every phone is different and someone's favorite kernel just may not like your phone -- doesn't make it a bad kernel just makes it the wrong one for your phone, flash a different one
5. theme if you want -- this is where your recoveries become important as themes are notorious for not always sitting well and all is ok if you have a backup you can return to
6. NEVER flash a baseband from another variant -- stick with your MG1 from your carrier until your carrier updates stock firmware

[Q] stuck please help

I have i337m MODEL. It was rooted and i downloaded odin app from market. downloaded "BeanStalk 4.4.215 jfltecan" rom and tried to install through odin app. I thought i didnt need anything esle. the installation failed and now my phone is stuck on "Samsung galaxy s4" screen. i tried to wipe data and cache but still no help. still stuck. can someone please help.
Thanks
khanbaba59 said:
I have i337m MODEL. It was rooted and i downloaded odin app from market. downloaded "BeanStalk 4.4.215 jfltecan" rom and tried to install through odin app. I thought i didnt need anything esle. the installation failed and now my phone is stuck on "Samsung galaxy s4" screen. i tried to wipe data and cache but still no help. still stuck. can someone please help.
Thanks
Click to expand...
Click to collapse
You don't flash ROMs through ODIN. You'll need to use ODIN from your computer to flash the stock firmware, reroot, install a custom recovery like TWRP or CWM, and flash the ROM through the custom recovery.
DeadlySin9 said:
You don't flash ROMs through ODIN. You'll need to use ODIN from your computer to flash the stock firmware, reroot, install a custom recovery like TWRP or CWM, and flash the ROM through the custom recovery.
Click to expand...
Click to collapse
ok any idea where to donload the stock firmware?
khanbaba59 said:
ok any idea where to donload the stock firmware?
Click to expand...
Click to collapse
sammobile.com should have it. You'll need to make a free account, and search for your model. I'm not sure what firmwares you can and can't downgrade on i337m, so try and get the same one you were on before. You might also want to use a CSC changer to make sure it identifies with your correct carrier, but I don't believe it's necessary.
DeadlySin9 said:
sammobile.com should have it. You'll need to make a free account, and search for your model. I'm not sure what firmwares you can and can't downgrade on i337m, so try and get the same one you were on before. You might also want to use a CSC changer to make sure it identifies with your correct carrier, but I don't believe it's necessary.
Click to expand...
Click to collapse
Thank you so much for your help.

Samsung galaxy s4 i9505 demo unit

Hello i have the samsung s4 i9505 demo and i have root it and install custom firmware. All ok so far .....
But i need an app for my work and that app needs android 6 or 7 to work... so i download custom 6 and 7 .... i try to install it but always stucks in logo!! nothing happens!!!
I try all stuf i find in XDA but nothing works.... i try to stock firmware but ODIN says FAILED...
Can anyone help me!!!
The "phone" its a tool for my work.... i used like mini tablet.!!!!
anyone???
Try to flash TWRP and then flash the room you want
laishi said:
Try to flash TWRP and then flash the room you want
Click to expand...
Click to collapse
I have flash it TWRP and nothing again
lazlos said:
I have flash it TWRP and nothing again
Click to expand...
Click to collapse
Live demo units are so limited and so far from being a real phones, your phone model is i9505X, so it's not i9505 and so, you won't be able to flash custom ROM on it.
MigoMujahid said:
Live demo units are so limited and so far from being a real phones, your phone model is i9505X, so it's not i9505 and so, you won't be able to flash custom ROM on it.
Click to expand...
Click to collapse
If you read my message i say i have "Hello i have the samsung s4 i9505 demo and i have root it and install custom firmware. All ok so far ....."
I use it like mini tablet with android 5 .....I wanted to pass 6 or 7 and since then I have a problem at the establishment.
The device can flash it all roms....but....something goes wrong.... and i need someone to help me.
I have read many many threats but with no solution.
Import Sim Contact Issue
Hi,
Just got SPH-L720 with 4.4.2 but facing problem of contacts, there is no option to import contacts from sim phone except usb storage,
There is also no option to show sim contacts in setting, I am using GSM not cdma.
Wonder if someone can suggestion solution,
thanks
Regards,
Syed
lazlos said:
If you read my message i say i have "Hello i have the samsung s4 i9505 demo and i have root it and install custom firmware. All ok so far ....."
I use it like mini tablet with android 5 .....I wanted to pass 6 or 7 and since then I have a problem at the establishment.
The device can flash it all roms....but....something goes wrong.... and i need someone to help me.
I have read many many threats but with no solution.
Click to expand...
Click to collapse
I read your message very well, just "i9505 demo" seems complicating, as the live demo version of the i9505 is the i9505X that's all what i was saying, so if you're sure you have a i9505 phone, then it's not demo.
Back to your problem:
1-what recovery are you using? If TWRP then what version?
2-what rom did you try to flash? And what did you wipe before flashing?
MigoMujahid said:
I read your message very well, just "i9505 demo" seems complicating, as the live demo version of the i9505 is the i9505X that's all what i was saying, so if you're sure you have a i9505 phone, then it's not demo.
Back to your problem:
1-what recovery are you using? If TWRP then what version?
2-what rom did you try to flash? And what did you wipe before flashing?
Click to expand...
Click to collapse
I have use and the TWRP but nothing happen again.
I try 6-7 roms without solution.
The ODIN says Failed....everytime i try to install stock rom.
And everytime i install custom rom with TWRP or else ....the phone stay in first screen.....for hours.
Yesterday I found a ROM and installed it with ODIN .... it made installation almost to the end and then a message "authe"is in the end of the line. the mobile opened in version 4.2.2 but it does not work so good....no wifi and to slow!!!!
I search again for more roms or to make it android 6 or 7 custom .... but everytime its stucks
lazlos said:
I have use and the TWRP but nothing happen again.
I try 6-7 roms without solution.
The ODIN says Failed....everytime i try to install stock rom.
And everytime i install custom rom with TWRP or else ....the phone stay in first screen.....for hours.
Yesterday I found a ROM and installed it with ODIN .... it made installation almost to the end and then a message "authe"is in the end of the line. the mobile opened in version 4.2.2 but it does not work so good....no wifi and to slow!!!!
I search again for more roms or to make it android 6 or 7 custom .... but everytime its stucks
Click to expand...
Click to collapse
Ok, what TWRP are you using? you should flash android 6 or 7 with the latest TWRP 3, not with an older version, also for stock rom you should download it from a trusted site like sammobile.com, or samsung-firmware.org, other than those i wouldn't recommend, and use Odin 3.07 or 3.09, those versions works for everyone.
MigoMujahid said:
Ok, what TWRP are you using? you should flash android 6 or 7 with the latest TWRP 3, not with an older version, also for stock rom you should download it from a trusted site like sammobile.com, or samsung-firmware.org, other than those i wouldn't recommend, and use Odin 3.07 or 3.09, those versions works for everyone.
Click to expand...
Click to collapse
I will try it out and tell you in the afternoon .... I hope to succeed
MigoMujahid said:
Ok, what TWRP are you using? you should flash android 6 or 7 with the latest TWRP 3, not with an older version, also for stock rom you should download it from a trusted site like sammobile.com, or samsung-firmware.org, other than those i wouldn't recommend, and use Odin 3.07 or 3.09, those versions works for everyone.
Click to expand...
Click to collapse
I have install stock ROM with ODIN.... i made Cf Root....
I have install TWRP 3.1.0 and i start it....i choose cm-14 rom .... i reboot it and i wait and i wait.....its stucks again in CM logo.... 120 minutes and nothing.
I try this https://forum.xda-developers.com/ga...dcteam-android-source-project-nrd90m-t3453084 but.....nothing again...stucks again!!
lazlos said:
I have install stock ROM with ODIN.... i made Cf Root....
I have install TWRP 3.1.0 and i start it....i choose cm-14 rom .... i reboot it and i wait and i wait.....its stucks again in CM logo.... 120 minutes and nothing.
I try this https://forum.xda-developers.com/ga...dcteam-android-source-project-nrd90m-t3453084 but.....nothing again...stucks again!!
Click to expand...
Click to collapse
OK, did you format system partition as ext4 in TWRP?, f2fs may have problems with system partition.
MigoMujahid said:
OK, did you format system partition as ext4 in TWRP?, f2fs may have problems with system partition.
Click to expand...
Click to collapse
i don't know that!
Tell how can i do it!
lazlos said:
i don't know that!
Tell how can i do it!
Click to expand...
Click to collapse
In advanced wipe menu, Mark the system partition, then press the button at the bottom that says "repair or change file system", and choose EXT4 then format the system, and see if that works, if it didn't work, try doing the same for /data and /cache partitions.
MigoMujahid said:
In advanced wipe menu, Mark the system partition, then press the button at the bottom that says "repair or change file system", and choose EXT4 then format the system, and see if that works, if it didn't work, try doing the same for /data and /cache partitions.
Click to expand...
Click to collapse
Nothing again...always stucks in boot.....
lazlos said:
Nothing again...always stucks in boot.....
Click to expand...
Click to collapse
OK, last suggestion is, download the most latest firmware for your phone from sammobile.com and flash it with Odin, and then try the twrp flashing thing again.
Maybe you have an old bootloader.
MigoMujahid said:
OK, last suggestion is, download the most latest firmware for your phone from sammobile.com and flash it with Odin, and then try the twrp flashing thing again.
Maybe you have an old bootloader.
Click to expand...
Click to collapse
You mean i9505 firmware or i9505x?
I find only for i9505...is that ok?
lazlos said:
You mean i9505 firmware or i9505x?
I find only for i9505...is that ok?
Click to expand...
Click to collapse
You're the one who told me your phone is i9505, you should have been sure of that, when you boot your phone the samsung logo appears with the phone name and model? What is written there? I9505 or i9505x?
MigoMujahid said:
You're the one who told me your phone is i9505, you should have been sure of that, when you boot your phone the samsung logo appears with the phone name and model? What is written there? I9505 or i9505x?
Click to expand...
Click to collapse
i9505x thanks for your patience

My note 3 n9005 rooted won't install custom roms. Every time I do I get an error.

So my note 3 n9005 always comes up with an error whenever I try installing custom roms. Even with Cwm or Phil touch recovery my phone gets bricked. Any help
Insayn29 said:
So my note 3 n9005 always comes up with an error whenever I try installing custom roms. Even with Cwm or Phil touch recovery my phone gets bricked. Any help
Click to expand...
Click to collapse
What error what roms ??
Usual story is wrong rom for phome model .
JJEgan said:
What error what roms ??
Usual story is wrong rom for phome model .
Click to expand...
Click to collapse
File package not supported if I remember correctly. I am on stock lollipop rom rooted
Check phone model by booting to download mode first .
Sent from my SM-N930F using XDA-Developers Legacy app
Rom should be zip file and flashed as zip through custom recovery .
JJEgan said:
Check phone model by booting to download mode first .
Rom should be zip file and flashed as zip through custom recovery .
Click to expand...
Click to collapse
Yeah i have the correct model for custom rom and everything foes fine till when it reaches the end of installation it comes up an error. I installed cwm and it bricked my phone so its back to lollipop stock rom rooted. Do i need to unlock or install anything else to make it work
I installed cwm and it bricked my phone
thats not possible unless you flash wrong stuff .
what file are you using ??
Insayn29 said:
Yeah i have the correct model for custom rom and everything foes fine till when it reaches the end of installation it comes up an error. I installed cwm and it bricked my phone so its back to lollipop stock rom rooted. Do i need to unlock or install anything else to make it work
Click to expand...
Click to collapse
Are trying to flash custom roms using the stock recovery ?
zlazaar said:
Are trying to flash custom roms using the stock recovery ?
Click to expand...
Click to collapse
No when I manage to get Cwm on my phone I use that then when rebooting phone it goes back to stock recovery
JJEgan said:
I installed cwm and it bricked my phone
thats not possible unless you flash wrong stuff .
what file are you using ??
Click to expand...
Click to collapse
I use rom manager to flash my Cwm. If flashes fine then when I reboot phone it goes back to stock recovery then into download mode
Insayn29 said:
No when I manage to get Cwm on my phone I use that then when rebooting phone it goes back to stock recovery
Click to expand...
Click to collapse
In certain cases, custom recovery won't stick after reboot. The stock firmware will replace it.
Best procedure is to untick "Auto-reboot" in odin and flash TWRP or Phil'z, then manually reboot directly to recovery.
<I use rom manager to flash my Cwm>
Thats your problem . Dont use rom manager at all .Multiple identical posts on the forum .
TWRP is better than CWM, in my opinion. More custom ROMs seem to be more compatible for some reason with TWRP.
2.8.7 to be on the safe side

Help recovering data

So I have a friend who decided to mess with his phone, of course without doing a backup, and now he's stuck in a situation that it can't boot even into recovery.
Currently all I see when booting to recovery:
Recovery Booting. . . . .
Set Warranty Bit : recovery
The phone is G900F
He has no idea what version was installed on it before.
I don't need the phone to boot, I need to recover the files on it.
Being a oneplus person myself, I'm not that familiar with samsung phones (my latest samsung was s2).
I've tried to install with odin (3.0.7 - if that matters) the following recoveries:
official twrp 2.8.7
twrp
cwm
All these recoveries showed "Recovery is not seandroid enforcing" message as well as the above when trying to boot into recoveries.
I've tried the official recovery as well:
https://forum.xda-developers.com/galaxy-s5/general/sm-g900f-stock-recovery-5-0-lollipop-t3228871
which removed the "seandroid" message, but that's all.
Not sure what I'm missing.
Any help would be appreciated!
Tahvok said:
So I have a friend who decided to mess with his phone, of course without doing a backup, and now he's stuck in a situation that it can't boot even into recovery.
Currently all I see when booting to recovery:
Recovery Booting. . . . .
Set Warranty Bit : recovery
The phone is G900F
He has no idea what version was installed on it before.
I don't need the phone to boot, I need to recover the files on it.
Being a oneplus person myself, I'm not that familiar with samsung phones (my latest samsung was s2).
I've tried to install with odin (3.0.7 - if that matters) the following recoveries:
official twrp 2.8.7
twrp
cwm
All these recoveries showed "Recovery is not seandroid enforcing" message as well as the above when trying to boot into recoveries.
I've tried the official recovery as well:
https://forum.xda-developers.com/galaxy-s5/general/sm-g900f-stock-recovery-5-0-lollipop-t3228871
which removed the "seandroid" message, but that's all.
Not sure what I'm missing.
Any help would be appreciated!
Click to expand...
Click to collapse
Hmm...
I see that your friend messed up his phone very well .....
Hopefully the eMMC memory is not corrupted becuase then only motherboard replacement would be necessary.
Summarising what you wrote:
1. you flashed "official recovery 2.8.7" -> where did you get it from? 2.8.7 is the very old version!
2. you flashed unofficial TWRP very old (2014) recovery (I checked your link)
3. you flashed unofficial CWM very old (2014) recovery (I checked your link)
4. finally you flashed stock, from old OS 5.0 Lollipop recovery provided from entrusted source - nobody reported that it works in the thread.
I listed this for you in order to underline one thing - READ, READ, READ, ASK, ASK, ASK .... before flashing anything to the phone and tell it to your friend.
Le's start with flashing from ODIN ver 3.12.7 (I am using it) this version of TWRP:
twrp-3.1.1-0-klte.img.tar for G900F which is the latest official recovery:
https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Read how to flash it with odin method (when you open the link).
Edit: Are you sure the phone is SM-G900F? Please check model number on the label under battery (inside the phone).
Edit2: When you enter odin mode check phone model version as well - it is provided by installed bootloader.
Many40 said:
Hmm...
I see that your friend messed up his phone very well .....
Hopefully the eMMC memory is not corrupted becuase then only motherboard replacement would be necessary.
Summarising what you wrote:
1. you flashed "official recovery 2.8.7" -> where did you get it from? 2.8.7 is the very old version!
2. you flashed unofficial TWRP very old (2014) recovery (I checked your link)
3. you flashed unofficial CWM very old (2014) recovery (I checked your link)
4. finally you flashed stock, from old OS 5.0 Lollipop recovery provided from entrusted source - nobody reported that it works in the thread.
I listed this for you in order to underline one thing - READ, READ, READ, ASK, ASK, ASK .... before flashing anything to the phone and tell it to your friend.
Le's start with flashing from ODIN ver 3.12.7 (I am using it) this version of TWRP:
twrp-3.1.1-0-klte.img.tar for G900F which is the latest official recovery:
https://twrp.me/samsung/samsunggalaxys5qualcomm.html
Read how to flash it with odin method (when you open the link).
Edit: Are you sure the phone is SM-G900F? Please check model number on the label under battery (inside the phone).
Edit2: When you enter odin mode check phone model version as well - it is provided by installed bootloader.
Click to expand...
Click to collapse
First, thank you for trying to help me!
Please see attachments:
https://drive.google.com/folderview?id=1euC7-CoBeeUQxTGXQnPPgRE2-5VxFXLh
You can see that it is indeed g900f. I've also checked under the battery.
I've flashed the recovery you asked, however I could not find odin 3.12.7 only 3.12.10, so I've flashed with that (the odin thread on xda does not provide a link for 3.12.7 download).
You can see that it's still not booting with that recovery, it's just stuck at "booting recovery" screen.
I'm thinking perhaps it has a bad bootloader? How would you suggest to proceed?
Tahvok said:
First, thank you for trying to help me!
Please see attachments:
https://drive.google.com/folderview?id=1euC7-CoBeeUQxTGXQnPPgRE2-5VxFXLh
You can see that it is indeed g900f. I've also checked under the battery.
I've flashed the recovery you asked, however I could not find odin 3.12.7 only 3.12.10, so I've flashed with that (the odin thread on xda does not provide a link for 3.12.7 download).
You can see that it's still not booting with that recovery, it's just stuck at "booting recovery" screen.
I'm thinking perhaps it has a bad bootloader? How would you suggest to proceed?
Click to expand...
Click to collapse
Ok. Let's continue ... I hope (as I had very similar situation) that the phone is not hardbricked and eMMC memory is not corrupted -> I faced this on my phone and finally had to replace motherboard.
But let's be optimistic:
1. For data recovery - I don't have a silver bullet for this but I found this software: http://www.recover-android-iphone.com/recover-android/how-to-recover-data-bricked-samsung.html
It needs working odin mode so under condition that it supports s5 G900F it should be able to restore some data.
2. For unbricking - I recommend to flash via odin the latest official Samsung stock firmware dedicated to your friend's country/region:
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900F/
You must be registered to download the software. Link for odin 3.12.7 is available on the bottom of the download page.
Just to underline - odin flash most probably (anybody please confirm that) will wipe your data so be aware of that.
Good luck.
Many40 said:
Ok. Let's continue ... I hope (as I had very similar situation) that the phone is not hardbricked and eMMC memory is not corrupted -> I faced this on my phone and finally had to replace motherboard.
But let's be optimistic:
1. For data recovery - I don't have a silver bullet for this but I found this software: http://www.recover-android-iphone.com/recover-android/how-to-recover-data-bricked-samsung.html
It needs working odin mode so under condition that it supports s5 G900F it should be able to restore some data.
2. For unbricking - I recommend to flash via odin the latest official Samsung stock firmware dedicated to your friend's country/region:
https://www.sammobile.com/firmwares/galaxy-s5/SM-G900F/
You must be registered to download the software. Link for odin 3.12.7 is available on the bottom of the download page.
Just to underline - odin flash most probably (anybody please confirm that) will wipe your data so be aware of that.
Good luck.
Click to expand...
Click to collapse
Why a full firmware is needed? Perhaps I can flash only the parts required to get into recovery? I count mount the phone from recovery, that's why it's my priority.
I would like to know also if odin will wipe everything if flashing a full firmware?
Tahvok said:
Why a full firmware is needed?
Click to expand...
Click to collapse
Because it is commonly recommended way to unbrick a phone.
Perhaps I can flash only the parts required to get into recovery?
Click to expand...
Click to collapse
Perhaps, yes. But:
1. I don't exactly know what restricts your recovery to run properly. Flashing separate recovery failed.
2. You, for example, could try flashing separately one of the latest bootloaders dedicated to G900F from BL section with odin but I doubt it would help.
I count mount the phone from recovery, that's why it's my priority.
I would like to know also if odin will wipe everything if flashing a full firmware?
Click to expand...
Click to collapse
As far as I know yes but I am not 100% sure because I didn't try that myself on s5.
I would appreciate if somebody else confirms that.
Many40 said:
2. You, for example, could try flashing separately one of the latest bootloaders dedicated to G900F from BL section with odin but I doubt it would help.
Click to expand...
Click to collapse
Can you suggest a bootloader for me? I would like to try that first.
Tahvok said:
Can you suggest a bootloader for me? I would like to try that first.
Click to expand...
Click to collapse
In my opinion, if odin mode works then bootloader should be OK. But as you wish -
tell me first what stock firmware will you later on trying to flash on your friends phone or in which country the phone will be operated.
Many40 said:
In my opinion, if odin mode works then bootloader should be OK. But as you wish -
tell me first what stock firmware will you later on trying to flash on your friends phone or in which country the phone will be operated.
Click to expand...
Click to collapse
Hong Kong
Tahvok said:
Hong Kong
Click to expand...
Click to collapse
Latest available Firmware version for Hong Kong is G900FZHS1CQD1 however I can't find a separate flashable bootloader for you.
Generaly, in my opinion you might try any of the latest bootloaders compatible with SM-G900F phone (here you can find a collection: https://forum.xda-developers.com/showpost.php?p=54094068&postcount=3, I am on G900FXXS1CQI4) but again:
1. I doubt it will help for entering recovery;
2. I still recommend to flash complete stock firmware to unbrick the phone.
However if you anyway decide to try with a bootloader, flash it with odin from BL section (untick auto reboot). Also turn off the phone before and after flashing and pull out battery for about 30 sec. It happens that bootloader doesn't flash properly at once even the odin says "PASS" so some people reported that they needed to repeat flashing a few times. I managed to flash bootloader at first time.
Unfortunateely the phone is not with me anymore, so I won't be able to continue testing. Thank you anyway for trying to help me! I really appreciate your help!

Categories

Resources