Related
Dear all, i try to root my u8800 pro using superoneclick v2.3.3 but it can not success.
My u8800 pro using android 2.3.5 normal overseas version.
I has try this below step :
1. press *#*#2846579*#*#
2. change log setting to on
3. enabling usb debuging
4. deactivate fast boot
5. reboot device than plug usb to computer (i already unmount micro sd card)
6. run superoneclick v2.3.3
but after that, rooting process can't run and stopping not responding
beside that,when i try to check my u8800 pro in pink screen, my computer can detect hardware,so i can't find boot.img and recovery
so please kindly help my problem, thank you before.
best regards. dhundhie
Sent from my U8800Pro using the XDA mobile application powered by Tapatalk
Which version of 2.3.5 stock have you? Why SuperOneClick? Pro roots by changing boot.img within pink screen. Have you instaled drivers?
Sent from my ragelis
Gingerbread 2.3.5 that i used is original from huawei overseas normal gingerbread.
when in pink screen, computer should be detect boot.img amd recovery, but when computer scanning new device, that can not found ? no device found when in pink screen, i have try to another computer n result is same.
Sent from my U8800Pro using the XDA mobile application powered by Tapatalk
Moved To Q&A
Please do not post questions in the development section.
Please use search function. Disperse information helps to nobody. Do not start a new thread if there is a similar thread opened. Please post in an existing thread with similar topic. Thanks
1. press *#*#2846579*#*#
Click to expand...
Click to collapse
is this for all android phones or specified ones
I have the same problem i did every thing perfectly and i could get to root nut phone... i tried super one click, z4root , easy root, unlock root , changing boot.img, ... i have my drivers installed correctly.. checked us debugging.. disable fast boot....switched to logged on ( project menu ) and i still got stuck on step 7 on super one click.. another program mentioned.. ( adb server out of date.. ) and ( failed to copy superuser.apk due to system read only..) ... so I'm stuck now for 2 month..can any one help ???
Sent from my U8800Pro
Sent from my U8800Pro
drwilsonm said:
I have the same problem i did every thing perfectly and i could get to root nut phone... i tried super one click, z4root , easy root, unlock root , changing boot.img, ... i have my drivers installed correctly.. checked us debugging.. disable fast boot....switched to logged on ( project menu ) and i still got stuck on step 7 on super one click.. another program mentioned.. ( adb server out of date.. ) and ( failed to copy superuser.apk due to system read only..) ... so I'm stuck now for 2 month..can any one help ???
Sent from my U8800Pro
Sent from my U8800Pro
Click to expand...
Click to collapse
I have the sam problem too ... I cannot root my phone ...and I cannot install the KALO rom
I have something for you, who need to root u8800 pro or ANY phones you want to root. It's easy. Go to google, search "root android phone by runme.bat", you will see what you need. Try and ask anything if i can help you.
P/s: i had 3 minutes to root my phone by runme.bat (super1click is not support my phone's adb driver, so i find out runme.bat and use it). Good luck!
-Sent from my u8800p-
NOOB FRIENDLY!
Introduction:
I am not a full-time/professional developer, but i do make roms and apps for my personal use, so do not make any rom or app request! I decided to create this thread because i would like to help members of XDA forum who may not fully understands how somethings work. I have seen many people posting their question in some developers thread and the question is just left there unanswered for months, and that is pretty normal! The developers are very busy making all those roms and kernel for you guys! I personally feel that those problems should be fixed, so i decided to create this thread, just to answer you questions! Too lazy to type now... The end
Common question:
What is "rooting"?
- Well i know most of you might have came across this word before: "rooting." Rooting is actually the process of giving your lovely smartphones, tablets, the ability to gain "privileged control or root access." By giving the device root access users can freely write/replace the system application, and also control the cpu clock rate [OC/UC]. GUIDE OF HOW TO ROOT GALAXY NOTE 2 (N7100): coming soon
What is CWM [clockworkmod recovery]?
-CWM is a custom recovery for android smartphones and tablet. It allows you to do things that are not possible to do in the stock recovery. CWM allows you to do things such as flashing custom kernels and roms, it will also allow you to make a NANDROID backup which can be used to restore if you encounter any problem after flashing new roms or kernel. If you would like to know more about CWM try research in the internet you will find loads of information about it.
What are "custom roms"?
Custom roms are roms that are made by other developers that is not the manufacturer of the device, the roms are customized in the way the developers wants. Some of the famous custom roms are: Cyanogenmod, Miui, etc. Custom roms can be based on the device stock rom, or it can be based on the AOSP [android open source project] source, just like the Cyanogenmod. GUIDE OF HOW TO INSTALL CUSTOM ROMS: coming soon
What are GB/HC/ICS/JB?
These are the version of the Android OS:
GB: Gingerbread v. 2.3-2.3.7
HC: Honey Comb v. 3.1-3.2
ICS: Ice cream sandwich v. 4.0.x
JB: Jelly Bean v. 4.1.x-4.2.x
***Feel free to drop some questions BUT REMEMBER THIS MY TIME ZONE IS GMT +7*** Please hit the "thanks" if i have helped you
-You warranty will be void after you have rooted you device!
- I am not resonsible for any bricked devices, so flash it at you own risk
How to root Galaxy note 2?
Instructions:
****If you want CWM recovery to be installed please use the alternative method****
Easy method: (CF-auto root) ***Follow these instruction carefully***
***Dont forget to install the samsung usb driver or you can just simply install samsung kies and it will install the driver for you***
1.Make sure you have the program ODIN. Download the attachment below if you dont have it.
2.Download CF-auto root for you device (make sure its for your device):
- N7100: http://download.chainfire.eu/264/CF-Root/CF-Auto-Root/CF-Auto-Root-t03g-t03gxx-gtn7100.zip
- N7105: http://download.chainfire.eu/255/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip
- SHV-E250K: http://download.chainfire.eu/276/CF-Root/CF-Auto-Root/CF-Auto-Root-t0ltektt-t0ltektt-shve250k.zip
- SHV-E250L: http://download.chainfire.eu/277/CF-Root/CF-Auto-Root/CF-Auto-Root-t0ltelgt-t0ltelgt-shve250l.zip
- SHV-E250S: http://download.chainfire.eu/278/CF-Root/CF-Auto-Root/CF-Auto-Root-t0lteskt-t0lteskt-shve250s.zip
Thanks to Chainfire for producing cf-auto root
3.Extract the .zip file to some where you can access it easily. Make sure that you do not extract it twice
4. Run the program ODIN.exe
5. Click the PDA button [do not try to be clever and click other things]=> choose the file you have extracted Cf-autoroot...tar.md5
6. Put you phone into DOWNLOAD MODE. (HOW?: Hold the POWER+VOLUME DOWN+HOME keys (together). You will be ask to continue or to restart the device=> press continue
7. Connect the device the computer using the USB cable
8. You should see a yellow box in ODIN, if there is no yellow box DO NO PROCEED!=> Disconnect the USB from the PC and then restart the phone into download mode again, then reconnect the phone. [make sure usb debugging is on]
9. Do not check REPARTITION
10. Click start and Be happy [This stage should be long, if its taking you hours, you must have done something wrong]
11. Hit the "Thanks" button! and also go and thanks chainfire too!
Alternatives:
*** Samsung kies/Samsung usb driver must be installed in you PC***
1. Download all the files you need below! Galaxynote2root.zip
2. Make sure that USB debugging is on=> setting->developer options->enable usb debugging
3. Extract the download .zip file into a place you can access easily
4. Run ODIN...exe
5. Turn you device into recovery mode=> HOLD POWER+VOLUME DOWN+HOME
6.Connect your device to the PC
7. There should be a yellow box appear in odin, if not DO NOT PROCEED! Try restarting your phone into download mode again, and please ensure that you have usb debugging on and also have samsung usb driver installed in you computer.
8. Click on "PDA" and choose the file cwm6-root-note2.tar
9. Click start and wait for a few second.......DONE! You will now have a rooted device+CWM (What is CWM? Read first post) You're now not a NOOB!
10. Hit the "thanks" button!
What should i do after rooting the device?
1. Stay with the boring stock rom that was made by your manufacturer.
or
2. Flash a custom rom and enjoy the smoothness and customization of the rom
Guide on how to flash a custom roms:
1. Download the rom you like: i would now like to breifly explain the difference between Aosp based custom rom and stock based custom rom.
Aosp [android open source project] rom:
-This type of rom are commonly known as "pure google roms" there will be no Touchwiz or SenseUI. The most famous Aosp based rom is the cyanogenmod rom. Aosp roms is most oftenly the lightest rom, but this does not mean that there is less customization. This type of rom will often gives better/faster performance than the stock rom, but however it can be less stable.
Stock based custom rom:
-Stock rom are roms that is made by your manufacturer, it is made specifically for your device. Developer will use this rom as a base and add some customization to the rom. Developer may also take out some things they do not like out of the rom, these are often known as "bloatwares." By using stock based custom roms, user will benefit from its stability, and some of the function made specifically for their device, e.g. S-pen functions.
Some link to the custom roms:
Stock based roms:
Omega: http://forum.xda-developers.com/showthread.php?t=1915036
Wanamlite: http://forum.xda-developers.com/showthread.php?t=1928227
Hypernote: http://forum.xda-developers.com/showthread.php?t=1942132
***There are more in the development section***
Aosp based roms:
Cm 10 and 10.1: http://get.cm/?device=n7100 *** if you are a beginner do not use 10.1 for now its still not stable ***
Jellybam: http://forum.xda-developers.com/showthread.php?t=1996038
Paranoid Android: http://forum.xda-developers.com/showthread.php?t=1970335
***There are more in the development section*** ALWAYS DO A MD5 SUM CHECK before flashing!!!
2. The rom you have downloaded should be in a .zip file ready for you to flash. DO NOT extract the file!
3. Connect your device to the PC (you do not need to turn it into download mode)
4. Copy the zip file into your INTERNAL sdcard (your phone storage), place it some where you can access it easily.
5. At this point make sure that your battery level is higher than 30% (i would recommend that it is fully charged or at least higher than half).
6. Reboot into CWM recovery [How? HOLD POWER+VOLUME UP+HOME]
7. If you are coming from stock rom or any other rom that is not the one that you will be flashing, you will need to make a full wipe!
8. DO A NANDROID BACKUP!=> go to backup and restore=>backup
9. Do a factory reset/data wipe
10. Wipe cache partition
11. advanced->wipe dalvik cache
12. Now it's time to flash the rom, to do this just select "install zip from sdcard" and then choose the .zip (your rom that you have downloaded) from you internal sdcard. ***Your rom that you have downloaded might use the aroma installer, just follow what it says and select what you would like to be installed.
13. DONE! *** first boot might take around 3-5 minutes, if you get a bootloop, try booting into recovery and do a full wipe and reflash the rom, if it still does not boot, go into recovery and restore from your NANDROID backup
14. Hit the "thanks" button!!!!!!!!
Reserved!
Great thread mate! Thanks
Sent from my GT-N7100
sos_sifou said:
Great thread mate! Thanks
Sent from my GT-N7100
Click to expand...
Click to collapse
More will be added to this thread soon, i will try to put every guides in here
Sent from my GT-N7100 using xda app-developers app
I have added more guides now!!! There will be more!
Very good info for noobs like me.
Sent from my GT-N7100 using xda premium
Thanks Chayangkul99. I appreciate the time you took to write these guides. Very well done.
Eugene
Good thread sir.
Maybe you could ask the moderators to pin this thread.
BTW, here below I think you meant to "turn your device into DOWNLOAD mode".
Chayangkul99 said:
5. Turn you device into recovery mode=> HOLD POWER+VOLUME DOWN+HOME
Click to expand...
Click to collapse
Q: If I root my device, will it add to the counter? I know it won't but just trying to make sure. From what I know, only flashing ROMs will add to the binary counter.
Also, how to do a MD5 SUM CHECK?
Lastly, I think you forgot to mention to flash GAPPS as well.
I suggest changing the thread title to 'newb friendly'. .lol
Noob is a guy who doesn't want to learn
scribbled from my note 2 (N7100)
You can grab some free md5 generators from the net, some of them can compare two files and tell you weather they are identical or not.
In your case, you need to compare the md5 of the downloaded file to the md5 of the original one on the server.
What's the point of comparing md5, just to make sure that you have EXACTLY the same file on your hard drive, because flashing corrupted files may damage your phone.
Best regards
Sifou
Using a Samsung N7100
Hi,
I bought a new Samsung galaxy note 2 GT-N7100.
I want to be able to remove the unecessary applications (such as Flipboard, Talk etc...)
People in XDA recommend me to root my phone but I think that I understood something: rooting a phone will just allow me to flash a CF on my phone (but will not allow me to remove apps that I dont want) am I right?
If I'm right, then it is impossible for me to keep the manufactured Rom and to be able to remove apps that i dont want.
Then, I should install CWM, root the phone AND install a CF for being able to remove what i want.
But the I want to keep the manufactured Rom on my phone and being able to remove what i want but it seems that is impossible.
I 'm...very confused and certain threat in the fora give me contradictory infos. I need to be sure.
You can root the stock rom and use titanium backup (or similar) to uninstall the aps you dont want. This is what I have done. No need to put a custom firmware on your phone. You dont even need CWM.
Sent from my GT-N7100 using xda app-developers app
Chayangkul99 said:
I have added more guides now!!! There will be more!
Click to expand...
Click to collapse
Maybe its me being a pain but maybe you should only have the info for n7100 and n7105 because folk could get confused maybe.. or re-highlight them a diff colour as to not be confused.. I have a free day tomorro I can dig out some guides and pass them here then you need to see about getting this made into a sticky.
Also the yellow doesnt read well on tapatalk lol fantastic job otherwise hopefully it this thread wont get lost n fall to the end..
Sent from my GT-N7100 using Tapatalk 2
Hmmm nice collection:laugh:
How
but can't delete for some reason.
How to do the Rooting using a Mac (not PC)
Hi – really appreciate all the great info.
Problem for me is that I have a Mac, not a PC.
How would I do this using a Mac?
Thanks
Chayangkul99 said:
-You warranty will be void after you have rooted you device!
- I am not resonsible for any bricked devices, so flash it at you own risk
How to root Galaxy note 2?
Click to expand...
Click to collapse
You can add my guide if you want, it's for new user.
[Novice Guide] So you just bought a Note2 - 50+ Tips and Tricks+Make phone faster
---------- Post added at 04:48 AM ---------- Previous post was at 04:37 AM ----------
PiCrucher said:
Hi,
I bought a new Samsung galaxy note 2 GT-N7100.
I want to be able to remove the unecessary applications (such as Flipboard, Talk etc...)
People in XDA recommend me to root my phone but I think that I understood something: rooting a phone will just allow me to flash a CF on my phone (but will not allow me to remove apps that I dont want) am I right?
If I'm right, then it is impossible for me to keep the manufactured Rom and to be able to remove apps that i dont want.
Then, I should install CWM, root the phone AND install a CF for being able to remove what i want.
But the I want to keep the manufactured Rom on my phone and being able to remove what i want but it seems that is impossible.
I 'm...very confused and certain threat in the fora give me contradictory infos. I need to be sure.
Click to expand...
Click to collapse
Rooting your phone is the first step for everything else.
Flashing CF will root your phone.(Some version of CF include a CWM some dont)
So you can, only root or root AND install a recovery(CWM)
To flash custom ROM or mods you need CWM but you don't need CWM if you just want to remove bloatware(unwanted apps).
Once your phone is Rooted you need an app to remove bloatware(Titanium backup is one of them)
Hope it helps
That is a great guide. Thank you.
Now that I have directions for rooting it using my mac, I'm going to try it.
What I want to do more than anything with root is to be able to make in app purchases. I don't understand why they have to make buying from outside the US so hard.
Anyway, I pray all the directions are there and are right as bricking the Note 2 would not be good.
Kremata said:
You can add my guide if you want, it's for new user.
[Novice Guide] So you just bought a Note2 - 50+ Tips and Tricks+Make phone faster
---------- Post added at 04:48 AM ---------- Previous post was at 04:37 AM ----------
Rooting your phone is the first step for everything else.
Flashing CF will root your phone.(Some version of CF include a CWM some dont)
So you can, only root or root AND install a recovery(CWM)
To flash custom ROM or mods you need CWM but you don't need CWM if you just want to remove bloatware(unwanted apps).
Once your phone is Rooted you need an app to remove bloatware(Titanium backup is one of them)
Hope it helps
Click to expand...
Click to collapse
Posted to wrong forum - sorry.
Still cannot delete a post I make. Someone please let me delete my own posts.
Hi there,
I am searching for hours for a solution to my Problem and could not find the trick. Hopefully someone can help me here...
I am trying to get root on my Car Navi which uses Omnirom (4.4.2) issued by its manufacturer. I've read that one simply should flash supersu.zip in recovery mode. The problem is that there is no documentation on how to enter the recovery mode on the device. When flashing new firmware/android, one simply insert a sd card with the new firmware and the flashing process starts automatically on reboot.
Is there another way to get root access for Omnirom kitkat? I've tried Framaroot without luck.
Thanks for any help.
Greets.
tobias.s said:
Hi there,
I am searching for hours for a solution to my Problem and could not find the trick. Hopefully someone can help me here...
I am trying to get root on my Car Navi which uses Omnirom (4.4.2) issued by its manufacturer. I've read that one simply should flash supersu.zip in recovery mode. The problem is that there is no documentation on how to enter the recovery mode on the device. When flashing new firmware/android, one simply insert a sd card with the new firmware and the flashing process starts automatically on reboot.
Is there another way to get root access for Omnirom kitkat? I've tried Framaroot without luck.
Thanks for any help.
Greets.
Click to expand...
Click to collapse
Um, Omni does not currently ship preinstalled on any device, and as a result, it's impossible to be running Omni without access to a custom recovery, since you need a custom recovery to install Omni in the first place.
Whatever your navigation system is running, it is NOT Omni, and as a result, this is not the correct place to be posting about issues with your device.
Sorry if this is the wrong forum, I just went to omnirom.org and there was a link to this forum.
This is a little bit weird: Omni was not preinstalled but the update(Omni) came directly from the manurfacturer (sntron.com).
In my case no recovery mode is accessible. As I've written in the 1st post, I copied the update on a sd-card and booted from it so that the updated installs automatically.
Attached is a picture of what is installed.
Thanks for any info.
wtf...
This is weird. That would make this device an unofficial kang that not a single member of the Omni team was aware of until now...
LOOL
Sent from my N1 using Tapatalk
OFFICIAL ONEPLUS 3T STOCK RESET
SOURCE : OnePlus L2 Support Team
VERSION : OxygenOS 4.0.3
REQUIRES 64 BIT WINDOWS OPERATING SYSTEM
DOWNLOADS
The Downloaded Package Contains:
1. OnePlus3T Stock Reset Oxygen 4.0.3 [Folder Name: OnePlus3T_28_A.041_170208]
2. Qualcomm Drivers (x64 Only) [Folder Name: 64-20160925T230624Z]
Google Drive | MediaFire
INSTRUCTIONS
You are doing this on your own responsibility. I take no responsibility whatsoever.
(THIS WILL WIPE YOUR ONEPLUS 3T INCLUDING INTERNAL SD [Read Section X to avoid Wiping UserData Partition] AND WILL ALSO LOCK YOUR BOOTLOADER; COMPLETE STOCK. ALSO THIS WILL WORK ONLY ON WINDOWS x64. TESTED ON WINDOWS 10 PRO)
Extract the Downloaded Archive (WinRAR, WinZIP, 7ZIP etc). You should have 2 folders: "OnePlus3T_28_A.041_170208" and "64-20160925T230624Z"
A. Install the Qualcomm driver.
Turn off your phone and disconnect the USB cable from the phone.
Hold vol-up and plug in the USB (Do not press Power button). The screen will stay black but you will hear a sound from windows that a device is attached.
Open Device Manager (Start -> Control Panel -> Device Manager)
Expand "Other Device". Under "Other Devices" you should find "QHSUSB_BULK". Right Click "Update Driver", search up the "64-20160925T230624Z" folder and press OK. The driver should now install.
B. Flashing Process
Open the OnePlus3T_28_A.041_170208 folder and open "MsmDownloadTool V3.0" as Administrator (Right Click -> Run As Administrator)
Look if your phone is detected in the list; one of the row would show the device type as "COM N". If not, recheck if driver is detected in Device Manager (Go back to Step A).
First click the right square "Verify" button. This will perform an integrity check on the downloaded files by verifying the MD5 hash values. The system will seem to hang for a bit but should give you a pop up with the results of the above verification. Confirm everything is ok. (If something is not ok, you will have to re-download the images.)
Press the "Start" button and let the progress finish.
When it's done. Disconnect the USB cable and turn on the device.
X. Flashing without Data Wipe
This Section is not personally tested. Hence before attempting to follow through, ensure you know what you are doing. Issues may occur if your current OS version is different.
Download the custom XML Files at https://drive.google.com/file/d/0Byn304jb_hlqZ29XM1oxUUZwbzg/view
Overwrite the Extracted Stock Reset's rawprogramX.xml files with these custom files.
Follow through with Section A: Install the Qualcomm driver and B: Flashing Process.
CREDITS
OnePlus Team for the Files.
@Babloo289 for the custom xml files in Section X
@Sam Nakamura for the link to the xml files.
If this thread has helped you, do press the THANKS button. Should you have issues, questions or doubts, write in this thread.
FREQUENTLY ASKED QUESTIONS
Will this work with OnePlus 3?
This is meant for OnePlus 3T ONLY. Failure to comply will lead to a bricked device which may be beyond repair.
I am using X Operating System. Will this work?
This must work with all Windows x64 based Operating System ONLY. It has been tested on Windows 10 Pro x64.
Oxygen OS X.X.X is released. Why hasn't this stock reset been updated yet?
This is what OnePlus L2 Team uses to flash your phone in an event of a soft brick or OS related issues. OnePlus has no reason to update this as this isn't supposed to be available to general public. If OnePlus releases a new one, rest assured you will eventually find it in another thread within this forum.
This is useless. It does nothing.
# Disable your AntiVirus and Firewall and try again. POST 8 BY @RY4N75
# Restart your computer with Driver Signature Verification disabled and try the entire process again.
# Post in this thread with your issue.
# If all else fails, open a ticket with OnePlus. Maybe they will help you sort this out.
For oxygen 4.1.3?
zulu_warrior said:
For oxygen 4.1.3?
Click to expand...
Click to collapse
As my First Post and Thread Title states, this is Official Stock Reset for 4.0.3 which is used by OnePlus L2 Team in an event of OS Issues (failed update, soft bricks etc) on your phone.
OnePlus usually does not create stock reset for every OS iteration. Hence do not expect new versions / updates of this. If I manage to get my hands on the new ones, it will surely be posted in a new thread in the Guides section in XDA.
Will it work on Oneplus 3
Puddi_Puddin said:
Will it work on Oneplus 3
Click to expand...
Click to collapse
If you use the recovery for 3t on your 3, you will end up with a unbootable phone due to wrong firmwares for the devices, so the answer is no. But of course you can just download the disaster recovery for the 3 which will work on that phone and f*** up the 3t instead ?
Puddi_Puddin said:
Will it work on Oneplus 3
Click to expand...
Click to collapse
This is for the 3T Only.
Anyone having issues with this I tried all afternoon but no luck. In the end I disabled my anti virus and firewall and it worked first time
Thanks for this guide. I don't need it now but good to have it handy. I've downloaded, installed the Qualcomm driver, checked and verified. I just have to remember that without an SD card anything needed after the restore needs backing up first.
Hi,
This is not helping for me. I disable everything but problem still persist.
THANKS
Awesome thanks, got me out of a spot
@fareed_xtreme
Here's a interesting approach from @Babloo289 to use the MSM-download-tool without wiping internal storage by editing its XML file, would maybe be worth to add to the OP, tagged experimental, so people can choose to use the workaround or not...
https://forum.xda-developers.com/on...ick-tutorial-oneplus-3t-t3515306/post74195674
Sent from my OnePlus3T using XDA Labs
I will try this as I plan to sell my OP3T now, hope everything's went well with this tool.
Thanks for the post.
I have unbricked my phone using this guide and it shows following information.
OxygeneOS : 3.5.1
Model Number : ONEPLUS A3003
Android Version: 6.0.1.
Actually, I am not able to update the phone to latest OS as after updating, it gets stuck in boot loop.
Apart from that, my WiFi and Bluetooth isn't working.
Can you please help?
pras_ahire said:
Thanks for the post.
I have unbricked my phone using this guide and it shows following information.
OxygeneOS : 3.5.1
Model Number : ONEPLUS A3003
Android Version: 6.0.1.
Actually, I am not able to update the phone to latest OS as after updating, it gets stuck in boot loop.
Apart from that, my WiFi and Bluetooth isn't working.
Can you please help?
Click to expand...
Click to collapse
But before the update it boots?
Does it show your imei in settings, about phone, status SIM? Looks like your EFS got damaged, I hope you did the recommended EFS update once in the past...
Are you sure that it's a 3T and not 3?
Maybe try to factory reset before updating? You could also use fastboot to format userdata, cache, then apply update from within stock recovery or adb sideload (apply update from adb -> stock recovery)
There's also a newer version of the MSM-download-tool which resets the device to nougat somewhere buried in this thread, I think it's this one...
https://drive.google.com/file/d/1VOPGeruxxz5HwB4f9tfuHWS_gfQ92dbH/view?usp=drivesdk
Sent from my Nexus 4 using XDA Labs
Sam Nakamura said:
But before the update it boots?
Does it show your imei in settings, about phone, status SIM? Looks like your EFS got damaged, I hope you did the recommended EFS update once in the past...
Are you sure that it's a 3T and not 3?
Maybe try to factory reset before updating? You could also use fastboot to format userdata, cache, then apply update from within stock recovery or adb sideload (apply update from adb -> stock recovery)
There's also a newer version of the MSM-download-tool which resets the device to nougat somewhere buried in this thread, I think it's this one...
Sent from my Nexus 4 using XDA Labs
Click to expand...
Click to collapse
Yes. it boots before update and does show IMEI for both SIM's. its 3T.
I have not done any EFS update in the past. I tried running "su" command using terminal emulator however it gives command not found error.
I will try with new MSM-download tool.
Sam Nakamura said:
But before the update it boots?
Does it show your imei in settings, about phone, status SIM? Looks like your EFS got damaged, I hope you did the recommended EFS update once in the past...
Are you sure that it's a 3T and not 3?
Maybe try to factory reset before updating? You could also use fastboot to format userdata, cache, then apply update from within stock recovery or adb sideload (apply update from adb -> stock recovery)
There's also a newer version of the MSM-download-tool which resets the device to nougat somewhere buried in this thread, I think it's this one...
Sent from my Nexus 4 using XDA Labs
Click to expand...
Click to collapse
I have tried MSM-download-tool which resets the device to nougat, however after update, it went in boot loop. Only tool from following link is working which install Oxygen OS 3.5.1 and android 6.
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
However again WiFi and Bluetooth not working. how I can make it working. Can you please help?
pras_ahire said:
I have tried MSM-download-tool which resets the device to nougat, however after update, it went in boot loop. Only tool from following link is working which install Oxygen OS 3.5.1 and android 6.
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
However again WiFi and Bluetooth not working. how I can make it working. Can you please help?
Click to expand...
Click to collapse
Are you sure it's a 3t not a 3?
Does Wi-Fi and BT work right after reset or is it only after update broken?
Sent from my Nexus 4 using XDA Labs
Sam Nakamura said:
Are you sure it's a 3t not a 3?
Does Wi-Fi and BT work right after reset or is it only after update broken?
Sent from my Nexus 4 using XDA Labs
Click to expand...
Click to collapse
Yes. It's 3T only. Indian version.
WiFi and BT does not work after update.
pras_ahire said:
Yes. It's 3T only. Indian version.
WiFi and BT does not work after update.
Click to expand...
Click to collapse
How did you update, via internal updater (in settings)?
Sent from my OnePlus 3T using XDA Labs
Anyone have the Android 12 firmware that Cricket released from this Reddit thread? There is one custom rom developed in this XDA thread but not sure how stable it is.
Hey dude, I'm currently using the a teams custom ROM From here.
I've used all three attached, only issues I found in them are as followed
Android 12 rom's Bluetooth will connect but won't send audio, to fix this go to settings/phh settings/misc/ there you'll find a bunch of options, Im using Android 11 rn so I can't tell u which one needs to be enabled ATM
Android 11 one doesn't have this issue, and all three won't allow lock screen or fingerprint, I couldn't find a fix for this)
Riotruth said:
Hey dude, I'm currently using the a teams custom ROM From here.
I've used all three attached, only issues I found in them are as followed
Android 12 rom's Bluetooth will connect but won't send audio, to fix this go to settings/phh settings/misc/ there you'll find a bunch of options, Im using Android 11 rn so I can't tell u which one needs to be enabled ATM
Android 11 one doesn't have this issue, and all three won't allow lock screen or fingerprint, I couldn't find a fix for this)
Click to expand...
Click to collapse
Thanks for the reply.
I'm a little confused with the aio toolkit requirement.
1. Is the aio toolkit is to help install TWRP and Magisk?
2. Where is the download link to aio toolkit?
3. How do you install the aio toolkit?
I couldn’t tell you on that, I never played around with it. Over on that thread you get 3 downloads, 2 android 12 gsm, and 1 android 11 gsm.
I
They all come with magisk pre installed, all you need is TWRP.
Riotruth said:
I couldn’t tell you on that, I never played around with it. Over on that thread you get 3 downloads, 2 android 12 gsm, and 1 android 11 gsm.
I
They all come with magisk pre installed, all you need is TWRP.
Click to expand...
Click to collapse
Ok. That's what I have in mind too. Normally you need to unlock bootloader and then install TWRP before you can flash the custom rom.
I thought the aio toolkit include the TWRP and Magisk. So you install it then boot to the stock recovery to flash the rom.
Yeah. Theres another post here for getting just twrp and magisk. I'm to lazy to quote it lol, but that's how I got it originally, I then flashed these ROM's without a issue.
Riotruth said:
Yeah. Theres another post here for getting just twrp and magisk. I'm to lazy to quote it lol, but that's how I got it originally, I then flashed these ROM's without a issue.
Click to expand...
Click to collapse
I finally installed the custom GSI roms. There is one major issue is that the phone don't ring for incoming calls. After 5 rings, it goes to the voicemail. I can make calls.
Did you have this problem? Which rom are you using?
I installed TWRP using AIO Toolkit. Not sure how you install your TWRP.
I wonder if the modified boot.img from Magisk might be the cause to the phone ring issue since my stock ROM is updated to Android 11 2023 February. The developer created the custom GSI roms and TWRP and Pre-patched using an older Android 11 in May 2022.
magi44ken said:
I finally installed the custom GSI roms. There is one major issue is that the phone don't ring for incoming calls. After 5 rings, it goes to the voicemail. I can make calls.
Did you have this problem? Which rom are you using?
I installed TWRP using AIO Toolkit. Not sure how you install your TWRP.
I wonder if the modified boot.img from Magisk might be the cause to the phone ring issue since my stock ROM is updated to Android 11 2023 February. The developer created the custom GSI roms and TWRP and Pre-patched using an older Android 11 in May 2022.
Click to expand...
Click to collapse
hi.
i have not noticed that at all. but i dont do calls lol.
i installed twrp myself, and am using the roms. would you mind explaining how you used AIOToolkit?
Riotruth said:
hi.
i have not noticed that at all. but i dont do calls lol.
i installed twrp myself, and am using the roms. would you mind explaining how you used AIOToolkit?
Click to expand...
Click to collapse
1. AiO Toolkit
Sure. In case you don't have a copy of the full AIO Toolkit that includes unbrick roms and rooted stuff. I upload a lite of the AIO Toolkit that includes only the rooted stuff, not full rom. It's only 360MB.
Public - Google Drive
drive.google.com
You will have to use Linux in order. I recommend Ubabutu v22 instead v23. I couldn't get it work in Windows.
Follow the direction in the readdme.md to install MTKClient and requirements: https://github.com/bkerler/mtkclient
After completing the installation, make sure you enable USB debugging and run `adb devices` and confirm to enable "Allow to use usb debugging" in the phone.
Run the AIO Toolkit CLI script: Main_Menu.sh. The simplest way to run this Main_Menu.sh is open the File Manager and right click on it and select Run. It will give you instruction what to do after you select the menu choice.
In the main meanu, select the bootloader menu item for unlocking the bootloader and select recovery menu item installing TWRP and Magisk.
If it ask to enter brom mode, just power off the phone, hold the volume up and down buttons for 2 seconds and connect the USB cable to PC. It should automatically recognize and do it stuff.
2. Bluetooth Fix
Also there is a fix for bluetooth by enabling this settings in any of the custom rom you use.
Go Settings > Phh Settings > Misc Features. Under Other section, check "Force disable A2DP Offline"
3. Phone call ring
Can you do a quick call test for me if you don't mind? Just have someone call your Dream 5G phone. If it rings, it means it works. If it works, can you list baseband version and custom rom you are using?
I really wanted to use Android 12 if I can fix the phone call ringg issue.
4. TWRP v3.7 update?
What version of TWRP are you using? is 3.6.x? Have you upgrade to v3.7x that is fully Android 12 compatiable?
I was going to do the manual process but there was only threads about it and not sure how relaible. So I use the AIO Toolkit.
However if you able to upgrade to v3.7, please share the steps.
Let me know if you need to help.