{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER: We are not responsible for any issues, problems, or broken phones, which may have come from using any data or information you receive from this thread. Using anything here, will most likely violate your cell phone's warranty or contract. That is also your 100% responsibility, to know, and your responsibilty if you do. If you don't know what you are doing, or you think you do, and you brick your phone, or something POSITIVE OR NEGATIVE changes with your phone, it is all 100% your responsibility. Use the following data, information, and links at YOUR OWN RISK!
Following 7.1 releases,Vanir will use Substratum as it's default theme engine.
Vanir follows AOSP Upstream and mainly focuses on performance Tuning Android.
Be a part of the Vanir community!
https://plus.google.com/communities/111378032131473754160
Features
Customizable Navbar
Customizable Statusbar
Customizable Power Menu
Customizable Quick Settings Panel
Customizable LCD Density
Heads Up (floating) Notifications
Long Press Quick Settings Header Shortcuts (Long Press Locations: Date, Time, Weather, & Battery)
Expanded Desktop Option with Per App Settings
Terminal App - Needs to be enable in Developer Settings
ScreenShot - Power + Volume Down
Advanced Reboot - Enable in Developer Settings
QuickBoot - Enable in Developer Settings
System Profiles - Turn WiFi, GPS, & other features on or off when you enter or leave trigger wifi signal
Hardware Menu with Kernel Processor & I/O scheduler settings
CM Themes in Settings
Instructions
Make a backup!
Wipe /system, /data, cache and dalvik cache.
Flash Vanir
Flash Gapps
Reboot to Vanir!
Download
Get the OFFICIAL NIGHTLIES HERE
G-Apps
http://opengapps.org/
Kernel source - https://github.com/LineageOS/android_kernel_xiaomi_cancro
Device - https://github.com/VanirAOSP/device_xiaomi_cancro
Vendor - https://github.com/TheMuppets/proprietary_vendor_xiaomi
XDA:DevDB Information
Vanir AOSP, ROM for the Xiaomi Mi 3
Contributors
aniket.lamba
Source Code: https://github.com/VanirAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: A custom recovery (TWRP preferrable),ROM and Gapps zip file,knowledge on how to flash zip files.
Based On: AOSP
Version Information
Status: Stable
Created 2016-01-23
Last Updated 2017-01-16
Credits
Thanks to Peter Alfonso, CM, the Fruits & Veggies Project, Rascarlo, Pawitp, AOKP, GaryD9, Androcom, Chevycam94, Team EOS, audahadi for his sources (coz,you know without his sources you won't have these awesome ROMs lol,jk :3),sudosurootdev for officially supporting this ROM!
Reserved
Anyone tried this?
Official support with nighlies...just awesome...!! I'll try and report back here...!
vishal24387 said:
Official support with nighlies...just awesome...!! I'll try and report back here...!
Click to expand...
Click to collapse
Waiting for your feedback.
Sent from my MI 3W using XDA Free mobile app
Going to Try as it's just like EOS
AOSP + CM
My taste
So far its smooth. Gonna try it till tomorrow. Browser gives a FC for some odd reason. I will try reFlashing
Tried this rom. Here is my review.
First of all rom is super smooth. No lag at all. Added CM theme support is really good. But didn't understand why customization option are limited?? I couldn't even find network speed on status bar option. Lock screen customization options are missing. Also very customized tiles are there. Like aomeone said browser fc.
In future I expect original rom developer will add more and more customisations like carbon or dirty unicorn has. Also with OTA support it would be awesome (sorry for too many complaints but thought to highlight missing points).
Deathonator said:
So far its smooth. Gonna try it till tomorrow. Browser gives a FC for some odd reason. I will try reFlashing
Click to expand...
Click to collapse
Try the gapps provided by Vanir Team and see whether the AOSP Browser FC issue solves or not. Here is the link for it: Team Vanir Gapps
Download the file named "60arm-DHO-GAPPs.zip"
I saw it as a solution in their G+ community.
Hope this helps.
Cheers
Edit: Yesterday night I tried to flash the ROM (25th Jan build) with different gapps including the Team Vanir one but all result in FC of the setup wizard.
Weird though...
On my end, either flashing the GApps at the first flashing or after the first boot resulted in Setup Wizard's FC, and it happens no matter which GApps did I used.
I used the latest nightly BTW.
I'll try wiping the caches again and report the result.
Edit: Yep. Still FC. Got any idea why this is happening?
rxl.noir said:
Weird though...
On my end, either flashing the GApps at the first flashing or after the first boot resulted in Setup Wizard's FC, and it happens no matter which GApps did I used.
I used the latest nightly BTW.
I'll try wiping the caches again and report the result.
Edit: Yep. Still FC. Got any idea why this is happening?
Click to expand...
Click to collapse
I had a lot of issues flashing this ROM. First, is it only for standard system partition? Looking at the partition size/available space in TWRP, that's what it indicates...
With the setup wizard FCs, I think the ROM is missing a patch to set Gapps permissions (or should that be in Gapps package??)
Anyway, if you have the time & inclination, you can drag down settings and navigate to Settings/Apps/(select all apps then) Setup wizard/permissions, and switch all the permissions on.
The problem is that you have like 1/10 of a second before the next Setup Wizard FC notification, so it takes a while/you have to be very fast in order to get to the Setup Wizard´s permission screen.
Will there be a N update of Vanir Aosp rom? Just asking because i saw N7 Branch for Cancro too.
Well in case you haven't noticed,Vanir 7.1 nightlies are up! Following 7.1 releases,Vanir will use Substratum as it's default theme engine.Go get em' - http://www.emccann.net/nuclearmistake/VanirAOSPNightlies/cancro
Based on LineageOs not AOSP
Sent from my MI 4LTE using Tapatalk
latifdnb said:
Based on LineageOs not AOSP
Click to expand...
Click to collapse
I guess there is a commotio build available for canco that is based on AOSP as far as I know
FM doesn't work, build date of March 6,2017
Sent from my MI 4LTE using Tapatalk
latifdnb said:
FM doesn't work, build date of March 6,2017
Sent from my MI 4LTE using Tapatalk
Click to expand...
Click to collapse
Try today's build,it should work.
Is this AOSP or Los based?
Airlibik said:
Is this AOSP or Los based?
Click to expand...
Click to collapse
Mostly LOS.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimKat is the project name for SlimRoms based on Android 4.4 and offers the following original features:
The Real Dark Slim
Full system-wide dark interfaces. - If you like it smooth and classy.
Custom Shortcuts. Everywhere.
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - We've got you covered.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticions, etc. - You'll be tapping away to your heart's content.
SlimCenter
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
Camera Features
Trueview, Smart Capture. - Capture life moments with ease.
Important links:
slimroms.net - The official webpage where you find everything you need to know about SlimRoms.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
[ROM][UNOFFICIAL][4.4.4][WEEKLIES] SlimKat [cancro], ROM for the Xiaomi Mi 3
Contributors
pandasa123
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2014-08-13
Last Updated 2014-08-13
Downloads
Remember, if you like my work, hit that thanks button and / or donate (if you're feeling extra happy)
ROM - Full ROMs every week
SlimGapps - Download Google App package and other addons. Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Slim 7.2
Start of project
For full list: Click here
Click to expand...
Click to collapse
List all Questions and Off-Topic discussions in Q/A Thread
Remember, flash at own will! Don't message me and threaten me with a lawsuit because I may or may not have broken your device!
Issues
Proximity Sensor
Auto Brightness
Most sensors lol
Thanks to:
SlimROMs for ROM
varun.chitre15 and qiwu for kernel
Click to expand...
Click to collapse
Installation Instructions
How to Enable Root
Downloading ... will give a try !
Boots !
Camera works !
FM works !
No random reboots !
All the icons are small ( maybe a slimkat feature dont know about this one)
Will need to test for else
TheDj408 said:
All the icons are small ( maybe a slimkat feature dont know about this one)
Click to expand...
Click to collapse
You might wanna increase DPI in that case.
TheDj408 said:
Downloading ... will give a try !
Boots !
Camera works !
FM works !
No random reboots !
All the icons are small ( maybe a slimkat feature dont know about this one)
Will need to test for else
Click to expand...
Click to collapse
Spectacular I'm glad a lot of the ROM works. As for icon size, Slimkat likes toning down the UI size for elegance. I've grown attached to it
DPI is at 370, which is exactly what it's at on the Nexus 5
thanks! downloading now, will test the room this evening.
Sent from my Mi3 via Tapatalk.
Great to see slimkat for Mi3.
What are the bugs? Sensors work?
harishl20 said:
Great to see slimkat for Mi3.
What are the bugs? Sensors work?
Click to expand...
Click to collapse
None yet, judging from user feedback, and no idea. I don't own the device, but decided to spend the last 2 nights (kept me awake for a bit) to build this
pandasa123 said:
Fully wipe your device from Recovery if you are not coming from SlimKat already.
Click to expand...
Click to collapse
I wiped everything but the SD card (to keep the installation file at least on the device), but I got bootloop after flashing the ROM and the according gapps package to both partitions. My previous ROM was a stable, 4.3 based official MIUI, and I have a CWM 6.0.4.8 by furiel.
Any idea how it went wrong? Do I also need to wipe the SD card?
s4tch said:
I wiped everything but the SD card (to keep the installation file at least on the device), but I got bootloop after flashing the ROM and the according gapps package to both partitions. My previous ROM was a stable, 4.3 based official MIUI, and I have a CWM 6.0.4.8 by furiel.
Any idea how it went wrong? Do I also need to wipe the SD card?
Click to expand...
Click to collapse
can you share a kmesg? I have a fair number of people saying theirs are fine, so i need to investigate any anomalies. just to make sure it's not the obvious candidate: is your device a cancro? try the cm in original android development just for sure, as it uses the same kernel.
Yes, it is a cancro, it is original, no doubt. I'll try to install an other CM-based ROM first, maybe I'll figure out something.
Do I need to wipe the SD card anyway?
s4tch said:
Yes, it is a cancro, it is original, no doubt. I'll try to install an other CM-based ROM first, maybe I'll figure out something.
Do I need to wipe the SD card anyway?
Click to expand...
Click to collapse
Usually not....strange...Did the other users wipe their sd cards?
OK, I got it working. I wrote this earlier: "My previous ROM was a stable, 4.3 based official MIUI" - that was the problem. I flashed the latest 4.8.8 developer ROM, than the SlimKat, and voilá, it's working. Camera works, UI is very fast, there's plenty of free RAM.
For those who have not used slim roms before, to enable root, follow this simple guide:
http://slimroms.net/index.php/faq/slimbean/441-how-do-i-enable-root
Thus ROM is for mi3w snapdragon version right??
Sent from my MI 3W
hrishikeshgramani said:
Thus ROM is for mi3w snapdragon version right??
Sent from my MI 3W
Click to expand...
Click to collapse
Yes
on a side note, can you guys use the Q/A Thread?
Wow I'm so happy this is so fast!! Currently I'm in a situation, I can't experiment with phone, but once I get out of it, I will be flashing Roms,
But I had no hope there will be a developer room! But I'm so really happy I couldn't help posting this, kudos to Op, you are simply awesome
So excited
Flashed the rom, using cwm with TDB enabled.
Flashing in system 2 doesn't work. Had to flash in system 1.
Wifi stuck at "Obtaining IP Address" - Anyone else? Any workaround?
**Changing the contents of /system/etc/wifi/ with the one in attached file fix my wifi**
Camera is working both still pics and video. Though video is by default set to 4k, had to change it before start recording.
Thanks for the awesome work. :good:
So guys there is not issue with sensors?? as in CM and Mokee rom?
camera and gps work, proximity sensor, auto brightness don't.
Sent from my Mi3 via Tapatalk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smooth like Butta
Note
This rom is only for the snapdragon intl. variant of the Xiaomi Mi 3
Follow on G+: Team Vanir
Vanir Team:
NuclearMistake
Sonicxml
DHO
PrimeDirective
Features:
Welcome to VanirAOSP. Our mission is to deliver a clean optimized version of Android with subtly improved versions of the features you love to as many devices as possible. we've tried to incorporate and improve our features in a way that makes them more cohesive to improve the overall user experience while correcting any performance regressions and improving functionality..
What to expect:
- This is not a McCopy ROM. What goes into our build is well thought-out and not a bunch of stuff duck taped together because we could.
- maximum optimization. We do our research. We test hard. We build -fstrict -O3 globally and include a massive array of code optimizations and memory leak fixes that we write ourselves and eventually submit to AOSP or Linaro.
- originality in our source. We generate a lot of new commits being features or general code improvements. We are open source to share and improve the community but we also try to make sure we offer a unique experience.
- aesthetics.. hopefully in your opinion
General features:
stock mode - ability revert to stock AOSP code with the exception of a few custom features we chose to keep active
enhanced performance.. longer uptime with less slowdown
custom written CRON and init.d.
UI and graphics improvements
custom navbar, navring, and hardware key features
improved notification handling (active display & halo are in review also)
usability improvements like power reboot menu and sound
animation control
Improved Vanir keyboard
CM's profiles & quicksettings
additional quicksetting tiles
immersive mode
statusbar mods
clock & battery mods
lockscreen blur and other mods
soon to come -> quick cam and flash notifications
busybox, embedded root, init.d, cron etc
yatta yatta yatta
more to come when i feel like updating the op
Changelog from Gerrit:
**Vanir Open Status
** Vanir Alternative Open Status
**Vanir Merged Status
** Vanir Alternative Merged Status
Download links removed until further notice
Vanir Github:
**VanirAOSP Git
Gapps:
**4.4.x PA Gapps
Bugs
Everything is fixed(Thanks to @varun.chitre15 and @qiwu
Don't hesitate to report in this thread
Installation Instructions
Make sure you're running cwm before attempting installation
Backup current rom
Full wipe
Install ROM
Install Gapps
Coming from any other aosp rom
Make sure you're running cwm before attempting installation
Backup current rom
Wipe cache/wipe dalvik cache
Install ROM
Install Gapps
Thanks
TeamVanir @varun.chitre15 & @qiwu: For making cm11 almost bugless
Source
Device(Kernel source also included)
Vendor
XDA:DevDB Information
VanirAOSP 4.4.4, ROM for the Xiaomi Mi 3
Contributors
##W4TCH0UT##, varun.chitre15, qiwu
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2014-09-01
Created 2014-09-01
Last Updated 2014-09-01
Reserved
CHANGELOGS
Build 2:
-Fixed sensors(Thanks to @varun.chitre15)
Build 1:
-Initial release
Stable version? No reboots? Because one of the big problems with the cm11 rom its the randoom reboots
rsimas said:
Stable version? No reboots? Because one of the big problems with the cm11 rom its the randoom reboots
Click to expand...
Click to collapse
Read the op,"Same bugs as in cm11"
##W4TCH0UT## said:
Read the op,"Same bugs as in cm11"
Click to expand...
Click to collapse
Yap i read but in rom information it says status: stable
OMFG!!! Thank you so much!!
Anybody that tried?
Anyone try it ??is that stable to an extend of capable to run daily
Yes. Only the sensors are not working which is fixed by @varun.chitre15 in his code. I'll build a new build as soon as I get time.
Changed the status to beta, seeing the development of cm11.
Sent from my GT-I9082 using Tapatalk
Report
Anyone missing dialer app in app drawer?
And I have found that the proximity sensor is not working
Build 2 is uploaded!
-Fixed sensors(Thanks to @varun.chitre15 and @qiwu)
Now everything is fixed thanks to qiwu and varun.Yippee!
There are 2 files with the same name.Download the one with a (2) beside it. Delete the (2) before flashing as it might not flash.
Enjoy!
Hey guys, is the sensor issue fixed in the new build, please report.
Sent from my GT-I9082 using Tapatalk
##W4TCH0UT## said:
Hey guys, is the sensor issue fixed in the new build, please report.
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
All sensors have been fixed huh? Yesterday i flashed CM 11 but auto brightness doesn't work so does it work here?
Fyzher said:
All sensors have been fixed huh? Yesterday i flashed CM 11 but auto brightness doesn't work so does it work here?
Click to expand...
Click to collapse
So auto brightness will not work here also as this ROM is based on cm11.
Sent from my GT-I9082 using Tapatalk
My initial thoughts after installing the ROM...
ROM installed without any issues..
Auto rotate works.
In call speaker works...
Camera works..but need more time to test...
No reboot so far...but need more time to test...
No inbuilt music player...
Very smooth..
Will report more later...
pratyush997 said:
OMFG!!! Thank you so much!!
Click to expand...
Click to collapse
Pratyush since you using 2 ROM's as well - I just had a question wonder if you can help me with that
I am on TDB as well - Using for now Miui5 & AOKP - Now issue is whenever I flash a new ROM on System1 i.e. where AOKP is at the present - Post that Miui doesn't boot - It would be stuck at MI Logo.
So again I need to flash Miui5 as well which is pretty irritating. If I am not doing anything to System2 then why after any install on System1 affects it - Any Clue Mate - Thanks in Advance :good::good:
My Antutu score in performance mode...way better than balance mode who scored only 26500 and also better than miui v6 which scored 35600...
Just a quick note on reboot issue...whenever I put in my pant pocket and take it after a longtime it reboots...other than that I didn't had reboot issue..
Great ROM...
Hey watchout.... happy to see u on mi3 thread
btw i have created an mi forum.....check it out and letme know if you want to edit something
http://en.miui.com/thread-40547-1-1.html
I have lot of reboots since morning..not sure what is the problem..reverted to miui v6..:crying::crying:Looking forward for a fix...
praveen7682 said:
I have lot of reboots since morning..not sure what is the problem..reverted to miui v6..:crying::crying:Looking forward for a fix...
Click to expand...
Click to collapse
Hmm.. I'll see to it. Was it happening earlier?
Sent from my GT-I9082 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is AOKP?
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.
Why AOKP ?
We were waiting for when you’d ask this.
There are a variety of reasons why a hilly billy Android user, on a bright sunny day, would suddenly start using AOKP and loving it.
For one, AOKP is lightweight. Most OEMs provide a heavy UI layer over Android and have loads of bloatware (i.e. apps that not everyone use every day, but you cannot remove because they’re “baked in” by default). Since AOKP is built upon vanilla Android source, it has neither of the above.
Also AOKP has features that you will not find on your stock firmware. You can have a multitude of toggles to quickly flip a lot of your phone’s settings right at your fingertips, or you can launch apps quickly from any screen using our Ribbons.
You can change almost each and every aspect of the OS, from its looks to the way it functions, with total freedom. And did we tell you, AOKP helps you make tacos?
INSTRUCTIONS
Factory Reset/Wipe Data
Format System
Format Cache
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Device
Kernel
XDA:DevDB Information
[ROM][CANCRO][6.0.1_r10] AOKP MM [UNOFFICIAL][Jan 26], ROM for the Xiaomi Mi 3
Contributors
Shivam Kumar Jha
Source Code: https://github.com/MarshMallowKang
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: AOKP
Version Information
Status: Testing
Created 2016-01-25
Last Updated 2016-01-25
Screenshots:
DOWNLOADS
Changelog:
2016-02-27_1715
New MIUI mm partition sizes (thanks to MrBaNkS)
CM 13 kernel
removed SRS processing
Based on latest sources
2016-02-18_0413
Option to control LED brightness (LED brightness can be changed till 1/4th of the slider, thereafter brightness remains same)
Doze/Ambient Display configs (works when there is a new notification)
SRS audio processing
Bootup happy dance (LED effects while boot up)
Enabled MM native Multi Window
Many build.prop tweaks (Rendering, GPU, battery, Sensor, Misc, Performance, Memory, Touch, Camera, Flash, TCP, DNS, RIL etc)
LiveDisplay (by CM maintainer)
SeLinux Permissive
1.2 GB System partition size
Built with default toolchain (4.9) & Banks Kernel credits to @mrbanks
What works?
Wifi
Mobile Network
Bluetooth
Sound
etc everything till I used
Bugs?
CM Bugs (if any)
You tell me if seen.
When boot up it gives fc on Google wizard and there it stops.
teodos said:
When boot up it gives fc on Google wizard and there it stops.
Click to expand...
Click to collapse
flash gapps after first boot and then there should be no such issues
Shivam Kumar Jha said:
flash gapps after first boot and then there should be no such issues
Click to expand...
Click to collapse
Flashed Rom + banks gapps facing bootloop
When flashing the Rom alone it boots fine
vishal1404 said:
Flashed Rom + banks gapps facing bootloop
When flashing the Rom alone it boots fine
Click to expand...
Click to collapse
Try open gapps,
i'm using it and there are no issues
Shivam Kumar Jha said:
Try open gapps,
i'm using it and there are no issues
Click to expand...
Click to collapse
okay ....and i must say rom is very smooth ....it will become better if you maintain and optimise it!
vishal1404 said:
okay ....and i must say rom is very smooth ....it will become better if you maintain and optimise it!
Click to expand...
Click to collapse
What's the customisation available in this ROM?
Sent from my MI 3W
will this rom maitained and kept up to date?
Thank you for the rom. I've tried it and this morning, while using MusixMatch, I was given a random SOD.
Shivam Kumar Jha said:
Try open gapps,
i'm using it and there are no issues
Click to expand...
Click to collapse
Thanks for making this ROM available, I just couldn't get this to run on my Mi3 Shame, I prefer AOSP...
(TWRP 2.8.7.0, with Open Gapps mini and Bank's Gapps, both similar size & content).
1) Tried installing the ROM plus Open Gapps: after "optimising apps", went back to the AOKP loading screen and many periodic vibrations, as if was starting to boot, but never left the AOKP loading screen.
2) Installed just the ROM - booted OK (but no Gapps, of course!)
3) Rebooted and then installed Open Gapps - booted to home screen with immediate "unfortunately Setup WIzard has stopped" dialogue.
4) Tried all the above with Banks' gapps - got the same results
I clean/dirty flash frequently and normally use Bank's gapps, only had issues like this with the Vanir ROM, which I couldn't get to complete setup either *
* the setup wizard has stopped message is a problem with gapps permissions, specifically the Setup wizard process. If you have plenty of patience you can navigate to Settings/Apps/(show all)Setup Wizard/Permissions (enable all) - the setup wizard dialogue goes away, then you need to contend with Browser, Play etc...
I believe that updating the permissions is a process which needs to be added to the ROM, not to gapps.
storytellerz said:
What's the customisation available in this ROM?
Sent from my MI 3W
Click to expand...
Click to collapse
It has many, see in screenshots
smh.saad said:
will this rom maitained and kept up to date?
Click to expand...
Click to collapse
Yupp I will give updates every weekend
gunblade712 said:
Thank you for the rom. I've tried it and this morning, while using MusixMatch, I was given a random SOD.
Click to expand...
Click to collapse
hmm will see
paul c said:
Thanks for making this ROM available, I just couldn't get this to run on my Mi3 Shame, I prefer AOSP...
(TWRP 2.8.7.0, with Open Gapps mini and Bank's Gapps, both similar size & content).
1) Tried installing the ROM plus Open Gapps: after "optimising apps", went back to the AOKP loading screen and many periodic vibrations, as if was starting to boot, but never left the AOKP loading screen.
2) Installed just the ROM - booted OK (but no Gapps, of course!)
3) Rebooted and then installed Open Gapps - booted to home screen with immediate "unfortunately Setup WIzard has stopped" dialogue.
4) Tried all the above with Banks' gapps - got the same results
I clean/dirty flash frequently and normally use Bank's gapps, only had issues like this with the Vanir ROM, which I couldn't get to complete setup either *
* the setup wizard has stopped message is a problem with gapps permissions, specifically the Setup wizard process. If you have plenty of patience you can navigate to Settings/Apps/(show all)Setup Wizard/Permissions (enable all) - the setup wizard dialogue goes away, then you need to contend with Browser, Play etc...
I believe that updating the permissions is a process which needs to be added to the ROM, not to gapps.
Click to expand...
Click to collapse
well i use my own tweaked gapps (based on open gapps) and those did work,
currently im using ressurection remix (own build),
will see
Shivam Kumar Jha said:
well i use my own tweaked gapps (based on open gapps) and those did work,
currently im using ressurection remix (own build),
will see
Click to expand...
Click to collapse
Could you share your version of Gapps, or the tweak/? Better a file which can be added to the gapps zip
Hello people,
an update
aokp_cancro_mm_unofficial_2016-02-11_0117.zip
Built using UBER TC 5.3.x
CM13 Kernel
Latest sources
1.2GB System partition size
EDIT:
Anyone here wants to taste SSHD MM ROM for cancro ?
Shivam Kumar Jha said:
Hello people,
an update
aokp_cancro_mm_unofficial_2016-02-11_0117.zip
Built using UBER TC 5.3.x
CM13 Kernel
Latest sources
1.2GB System partition size
EDIT:
Anyone here wants to taste SSHD MM ROM for cancro ?
Click to expand...
Click to collapse
Link for SSHD Rom?
Decided to try it out! So far best rom I have been using! Will test battery life, standby time and all the important stuff and will give me opinion.
teodos said:
Decided to try it out! So far best rom I have been using! Will test battery life, standby time and all the important stuff and will give me opinion.
Click to expand...
Click to collapse
Waiting for your thorough review.
Sent from my MI 3W
Armin_van_buuren said:
Link for SSHD Rom?
Click to expand...
Click to collapse
will this work with new miui mm partation??
Jay sharma said:
will this work with new miui mm partation??
Click to expand...
Click to collapse
Yes
Hey Shivam, I think there should be an option for disabling hardware keys in ROM tweaks. Else, this is the best ROM for Mi3.
. . . .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP Android Ice Cold Project AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!! Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features. If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!! . . . . .
In the beginning we would like to thank:
CM team
maxwen
SlimBean rom team
CarbonRom team
LiquidSmooth rom team
Omni rom team
DU team
Community
@LorD ClockaN
@zipsnet
@n3ocort3x
@semdoc
@eyosen
@alienmind
@Chezbel
@Drgravy
@eboye . . .
We are now paying for servers that build nightlies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses. Thank you!!
Latest Unofficial Release Version 12.1 Download link: https://www.androidfilehost.com/?w=files&flid=127253
Download Mirror courtesy of @rockafellor http://www.androidmirror.org/daleski75/AICP UNOFFICIAL/
Full Changelog link: goo.gl/mIgmYG
ROMS should contain everything you need to enjoy Nougat. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go! You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior. How to flash:
Don't do it if you don't know it
ROM has gapps persistance in between dirty flashes
KERNEL: Kernel in this rom follows CM source with custom additions. PREREQUISITE FOR OTA: To be able to flash over OTA app, TWRP recovery is needed. You can still use CWM and OTA app, but only to download zip file and flash it manually from within recovery. Zip gets saved under AICP_ota folder on your internal SDcard. If you want to contribute to the AICP or wanna see what is being worked on/merge feel free to visit our gerrit, link is at the bottom!!!
IceColdJelly AICP G+ community kernel github rom gerrit You want to see a normal night at the DEV office, click here!!
Flashing Instructions
YOU MUST flash 3.2.7 or be on 3.2.7 before flashing AICP
Wipe if coming from another ROM
Flash latest AICP
Flash Open Gapps 7.1
http://opengapps.org/
Kernel:
Github link: https://github.com/CyanogenMod/andro...6/tree/cm-14.0
ROM:
Github link: https://github.com/AICP
Gerrit link: http://gerrit.aicp-rom.com
Bugs
07/11 and 08/11 (not uploaded yet)
Camera FC's or cannot connect if you do a clean flash.
Echo in calls (this does not affect all users)
Video/Calls in Facebook Messenger
Live Display keeps on reverting back if you select Photo Display Mode after a reboot
Changing RGB values do not do anything
Android Pay (this is due to safetynet detecting an unlocked bootloader)
Battery icons cannot be changed (Only text works for the moment)
Cyanogenmod Weather not working
Reserved #2
Hi,
What's different compared to already available AICP except no-root?
Thanks !
silentvisitor said:
Hi,
What's different compared to already available AICP except no-root?
Thanks !
Click to expand...
Click to collapse
No-Root and raised call volume that's about it
@daleski75
And have you fixed the second Sim Data issue? :silly:
MultiCulti said:
@daleski75
And have you fixed the second Sim Data issue? :silly:
Click to expand...
Click to collapse
No idea no longer have 2 sims in my phone, but if AICP have fixed it then it's fixed in this build as well.
daleski75 said:
No idea no longer have 2 sims in my phone, but if AICP have fixed it then it's fixed in this build as well.
Click to expand...
Click to collapse
no, it wasnt fixed yet ... but in your cm thread was a patch from a other user!
sam_0829 said:
* Those who are having phone app crashes when enabling data on 2nd SIM can flash the attached zip. It will fix the crash & you should be able to use data on 2nd SIM as well.
* Random crashing of phone app when using Hike Messenger (or/and WhatsApp?) on data is also fixed. This was annoying as hell as it was resulting in network lost for few seconds when using these apps!
I have checked this zip on latest 05/11 build of @daleski75. But you can try by flashing on any CM 14.1 build, it should work.
Make a backup before flashing this to be on safe side.
P.S : I have just patched the reason of crash, can't say actually fixed the issue. I'll dig a little in details for finding & fixing the root cause if I get some good time
Click to expand...
Click to collapse
but its not working on AICP!
@daleski75
Good move to make aicp too, since it's almost same as cm14.1
But what is the difference between the build bot and your?
Cheers
Gesendet von meinem Pixel mit Tapatalk
Ramalama said:
@daleski75
Good move to make aicp too, since it's almost same as cm14.1
But what is the difference between the build bot and your?
Cheers
Gesendet von meinem Pixel mit Tapatalk
Click to expand...
Click to collapse
No root with voice calling volume raised maybe more differences in future but keeping it simple right now
Can't wait to give this a try!! ?
Sent from my ONEPLUS A3000 using Tapatalk
@daleski75
Did you found out why Google keyboard settings is crashing?
v5.2.0 (but same on 5.1.3)
Here is a video, what i mean...
https://youtu.be/Jj7HbDoMkFE
I've tried already to replace ime.jar and input.jar from the pixel dump framework... But doesn't help.
Or you don't have that bug?
That would be strange.
(maybe aicp specific)
Edit: I've installed it as pixelfy (LatinIMEGooglePrebuilt in system)
Ramalama said:
@daleski75
Did you found out why Google keyboard settings is crashing?
v5.2.0 (but same on 5.1.3)
Here is a video, what i mean...
I've tried already to replace ime.jar and input.jar from the pixel dump framework... But doesn't help.
Or you don't have that bug?
That would be strange.
(maybe aicp specific)
Click to expand...
Click to collapse
Never had the issue so not sure where to start you could not into TWRP mount system then delete LatinIME from app or priv-app but make sure you have the keyboard apk to hand
daleski75 said:
Never had the issue so not sure where to start you could not into TWRP mount system then delete LatinIME from app or priv-app but make sure you have the keyboard apk to hand
Click to expand...
Click to collapse
Great, than it must be on my side.
Good to know because it's fixable then
Cheers
@daleski75 I'm wondering: does your new build fix the AM/PM indicators on the lockscreen (AICP specific issue)? See screenshot.
If not, could you fix it in your unofficial builds? Already talked about it at G+ but they said a fix won't come for a while. Basically it's a feature that adds AM/PM on the lockscreen, but there are no controls to remove it. I prefer if AM/PM is disabled by default WITHOUT resorting to 24-hour clock.
daleski75 said:
Never had the issue so not sure where to start you could not into TWRP mount system then delete LatinIME from app or priv-app but make sure you have the keyboard apk to hand
Click to expand...
Click to collapse
Fixed
Full wiped... Now it's working.
After i removed the Keyboard from System, and tryed to reinstall it, the Installer asked me "this package is in collision with a package with the same Name" or sth like that.
But I had no Google Keyboard Installed...
Strange issue....
However, fixed After Full wipe
Cheers
I don't understand.
Is this now the same AICP rom? From the other AICP?
With some improvements???
YourTheBest said:
I don't understand.
Is this now the same AICP rom? From the other AICP?
With some improvements???
Click to expand...
Click to collapse
Read above...
Its without root and voice calling volume raised.
In the future there will be more differences.
Delete
Ramalama said:
@daleski75
Did you found out why Google keyboard settings is crashing?
v5.2.0 (but same on 5.1.3)
Here is a video, what i mean...
https://youtu.be/Jj7HbDoMkFE
I've tried already to replace ime.jar and input.jar from the pixel dump framework... But doesn't help.
Or you don't have that bug?
That would be strange.
(maybe aicp specific)
Edit: I've installed it as pixelfy (LatinIMEGooglePrebuilt in system)
Click to expand...
Click to collapse
I had the same issue with the keyboard and other apps, go to setting/apps/ google keyboard give all permission. same with the apps
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Always Have a full functional Backup. Just in case!
Recovery:
OrangeFox Recovery - https://sourceforge.net/projects/orangefox/files/vince/OrangeFox-R10.0-Stable-vince.zip/download
OFFICIAL BUILDS
DOWNLOAD GAPPS
Telegram Discussion Group - https://t.me/officialcrvincewhyred
First time installing crDroid to your Redmi Note 5/Redmi 5 Plus, or coming from another ROM:
** Make sure you're running the latest TWRP Treble Recovery
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash gapps
6) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
WiFiDisplay
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
Sources:
Kernel - https://github.com/stormbreaker-project/kernel_xiaomi_vince
ROM - https://github.com/crdroidandroid
Contributors:
@Ruturaj Kadam
@KenHV
@Prateek Punetha
@blacksuan19
@neobuddy89
ROM OS Version: 10.0 Q
ROM Kernel: Linux 4.9.x
ROM Firmware Required: Unlocked Bootloader
Based On: Lineage OS
Version Information
Status: Stable
Stable Release Date: 2020-01-16
Created 2019-11-12
Last Updated 2021-05-29
Update - 29/05/2021
What's New -
Source Changelog:
* crDroid v6.18
* May 2021 Security Patch
* Update translations
Device Changelog:
* Update to coral may fp
* Kernel Upstreamed with tag 4.9.270
Old Changelogs - https://github.com/crdroidandroid/android_vendor_crDroidOTA/blob/10.0/changelog_vince.txt
Camera2api enabler included ? Or should i flash it separately
I got a "Unsupported Android ARCH. Aborting..." msg trying to install gapps
edit:
this version of gapps works
joelzombie said:
I got a "Unsupported Android ARCH. Aborting..." msg trying to install gapps
edit:
this version of gapps works
Click to expand...
Click to collapse
Sorry, accidently linked wrong gapps. Thread updated now!
this build implement spoofing signature?
The feeling of using this rom is Fantastic.
Everything is very fast and very well responding in everything I have tried to.
Always crdroid was characterized by its sharp behavior.
This one is no different
This is a work very well done from our dev.
@Ruturaj Kadam, thank you for this
:good::good:
logosA said:
The feeling of using this rom is Fantastic.
Everything is very fast and very well responding in everything I have tried to.
Always crdroid was characterized by its sharp behavior.
This one is no different
This is a work very well done from our dev.
@Ruturaj Kadam, thank you for this
:good::good:
Click to expand...
Click to collapse
Can I hide power menu and quick settings on lockscreen with this version of Crdroid?
logosA said:
The feeling of using this rom is Fantastic.
Everything is very fast and very well responding in everything I have tried to.
Always crdroid was characterized by its sharp behavior.
This one is no different
This is a work very well done from our dev.
@Ruturaj Kadam, thank you for this
:good::good:
Click to expand...
Click to collapse
Is OTA UPDATE Support is present in this ROM
:victory:Thank you so much : the best rom i've tried on android 10
Another q ROM...I will definitely try this
[Bug]
Battery option not opening in settings menu and and ui stops working when try to change icon shape
Please add long screenshot
Thanks
---------- Post added at 01:50 AM ---------- Previous post was at 01:28 AM ----------
logosA said:
The feeling of using this rom is Fantastic.
Everything is very fast and very well responding in everything I have tried to.
Always crdroid was characterized by its sharp behavior.
This one is no different
This is a work very well done from our dev.
@Ruturaj Kadam, thank you for this
:good::good:
Click to expand...
Click to collapse
Plz send that link of gcam
Good ROM, quite stable for a first release. A couple bugs I noticed:
- Encryption does not work (like other Q ROMs for vince), it simply goes to a black screen and boot loops if you reboot. You must full wipe from recovery to boot up again.
- Changing theme icons and accent colors causes the same type of error - black screen and boot loop.
I dont have any issue changing theme icons and accent colour bro.
Neither do I, but I've noticed when using the Dark theme some images in Gmail appears as the negative version of the colors
The default camera takes photos with strange colors somethings, I installed another camera and works fine
Taking selfie video indoors are waaaay too dark
Push notifications in Whatsapp seems to work strange.... I can't receive messages until I open up the app manually.
Some FC here and there, but overall very good ROM, I've noticed better battery than CrDroid 5
Under crDroid Settings > Navigation, toggling off the Navigation Bar will turn it off, but after reboot the nav bar reappears and you must toggle it on and off to hide it again.
Unable to add new calendar events using the stock calendar. I can view, but there is no option to add events and touch/press has no effect.
Does this ROM have maximum charging level feature? It'd be great to have it built in the system, just like in Syberia OS.
cant save a screenshot
stock apps are failing over time
---------- Post added at 09:55 PM ---------- Previous post was at 09:53 PM ----------
Ksarin112 said:
Does this ROM have maximum charging level feature? It'd be great to have it built in the system, just like in Syberia OS.
Click to expand...
Click to collapse
no
New update is out! November security patch has been merged. OTA support has been added with this update. For full changelog, refer to post #2. Checkout new build from the link in OP.