My Huawei P8 has some blue clouding on the screen and I want to get it repaired. How can I find out what region the phone is originally from? Huawei USA support didn't understand the question and they said they cannot service the phone. It's a GRA-L09 I think from Latin America, but I don't know exactly where.
desertflyer said:
My Huawei P8 has some blue clouding on the screen and I want to get it repaired. How can I find out what region the phone is originally from? Huawei USA support didn't understand the question and they said they cannot service the phone. It's a GRA-L09 I think from Latin America, but I don't know exactly where.
Click to expand...
Click to collapse
I already wrote how to see the location of your P8 must be typed in dialer *#*#2846579#*#*> Network info-on query>Country Vendor Info>Vendor
My vendor is "eu" so I guess I will try with the German support. Thanks.
My vendor is: hw
Where is it from?
hi
My vendor is: hw
country: naf
where is it from ?
mohamed assaghir said:
hi
My vendor is: hw
country: naf
where is it from ?
Click to expand...
Click to collapse
That would be Egypt.
---------- Post added at 15:42 ---------- Previous post was at 15:41 ----------
emanulian said:
My vendor is: hw
Where is it from?
Click to expand...
Click to collapse
Sorry, can't tell without the country code.
What does it say next to 'Country'?
Vendor: hw
Country: meafnaf
It could been changed by updating the firmware from LL to MM (GRA-UL00C185B320)?. At first it has´t ...C185... (I didn´t take note the original)
emanulian said:
Vendor: hw
Country: meafnaf
It could been changed by updating the firmware from LL to MM (GRA-UL00C185B320)?. At first it has´t ...C185... (I didn´t take note the original)
Click to expand...
Click to collapse
That would be Pakistan.
Hey,
My vendor is hw and country is nla.
Thanks
(Note: this is Mate 7)
ERROR404_NameDisplay said:
Hey,
My vendor is hw and country is nla.
Thanks
(Note: this is Mate 7)
Click to expand...
Click to collapse
That would be North Latin America.
mai55 said:
I already wrote how to see the location of your P8 must be typed in dialer *#*#2846579#*#*> Network info-on query>Country Vendor Info>Vendor
Click to expand...
Click to collapse
my model is GRA-L09
Vendor: hw
Country: normal
could you help me, as this phone has hybrid tray but no option in setting for dual sim. how can i check that my model GRA-l09 is single sim or dual sim (its premium 64GB with kirin 935 verson)
abkhalid said:
Country: normal
Click to expand...
Click to collapse
That would be an International version.
abkhalid said:
my model is GRA-L09.......could you help me, as this phone has hybrid tray but no option in setting for dual sim. how can i check that my model GRA-l09 is single sim or dual sim (its premium 64GB with kirin 935 verson)
Click to expand...
Click to collapse
In that case, your phone is actually a GRA-UL10 or CL10 (not L09) - as only this model has the premium spec (64Gb storage) & dual-SIM capability.
My guess is that someone may have installed a GRA-L09 (single-SIM) firmware/rom on your phone, which would also explain the lack of dual-SIM settings. Contact the previous owner & ask about this.
What model is mentioned on the rear bottom of your phone in tiny text? And what's the full firmware build number in Settings > About phone? It will be in this format: GRA-xxxxCxxxBxxx.
Edit: Ok, what I said before may not be entirely true, as I've since found 2 instances of the L09 model with 64Gb storage + Kirin 935, & for both there's only single-SIM support mentioned:
https://www.kimovil.com/en/where-to-buy-huawei-p8-64gb
https://menarate.com/en/all-categories/Mobile-phones-2/Huawei-P8-64GB-Silver-GRA-L09-129776
GaT7 said:
That would be an International version.
My set is GRA-L09 and i update it to GRA-L09C432B392
Click to expand...
Click to collapse
abkhalid said:
My set is GRA-L09 and i update it to GRA-L09C432B392
Click to expand...
Click to collapse
From all the info you've given so far, my guess now is that you have an International version, but with a single-SIM European firmware installed (HERE's an example of a GRA-L09 dual-SIM firmware, so it does exist).
Where did you buy the phone from? Which country or region? If you bought it secondhand, where did your seller buy it from brand new?
What was the previous / original firmware installed before you updated to your present C432B392?
What was the original firmware that came with the brand new phone? Do you remember, or can you find out from the original buyer?
mine say
Vendor: country file not exist
Country: vendor country file not exist
cl0k said:
mine say: Vendor: country file not exist
Country: vendor country file not exist
Click to expand...
Click to collapse
Looks like you (or the previous owner) installed a firmware version that's different to the region meant for your phone - like in these 2 examples:
Help resting P8 back to complete stock, recovery, system etc.
Need a kind soul to help!
What is the model number/code mentioned in tiny text on the rear bottom of the phone? It will be in this format: GRA-xxxx.
What is the full 'Build number' mentioned in Settings > About phone? It will be in this format or similar: GRA-xxxxCxxxBxxx.
GaT7 said:
Looks like you (or the previous owner) installed a firmware version that's different to the region meant for your phone - like in these 2 examples:
Help resting P8 back to complete stock, recovery, system etc.
Need a kind soul to help!
What is the model number/code mentioned in tiny text on the rear bottom of the phone? It will be in this format: GRA-xxxx.
What is the full 'Build number' mentioned in Settings > About phone? It will be in this format or similar: GRA-xxxxCxxxBxxx.
Click to expand...
Click to collapse
hello thanks for reply model number is(let me know if u need to know the number called FCC ID:
GRA-LC09
Build Number: GRA-LC09C469b190
can u help me to fix it?? thanks in advance
cl0k said:
hello thanks for reply model number is(let me know if u need to know the number called FCC ID:
GRA-LC09
Build Number: GRA-LC09C469b190
can u help me to fix it?? thanks in advance
Click to expand...
Click to collapse
That looks fine, although normally it would be GRA-L09 & GRA-L09C469B190.
If it is as I say, which country are you from, or which country did you purchase the phone from? Also, is the phone vendor/network branded?
GaT7 said:
That looks fine, although normally it would be GRA-L09 & GRA-L09C469B190.
If it is as I say, which country are you from, or which country did you purchase the phone from? Also, is the phone vendor/network branded?
Click to expand...
Click to collapse
how to check the network branded??
im from chile and purchased at chile (Entel is the phone company )
cl0k said:
how to check the network branded??
im from chile and purchased at chile (Entel is the phone company )
Click to expand...
Click to collapse
Usually, on network-branded phones, the company's logo will be visible during bootup. Also, there may be Entel-related apps installed.
Are you wanting to update your phone's software from Lollipop (Android 5) to Marshmallow (Android 6)?
Related
I just got my phone, when I opened it I noticed that the first language option that was given to me was spanish (or maybe portugese not really sure) anyway, that got me curious, did my phone come originally from south america or somewhere in the iberian peninsula?
I was sure about this when I opened the browser and saw this locked bookmark from samsung that is in spanish.
anyway, is there anyway to know where my phone originally came from or was manufactured for? and is there any way to change this?
Thank you.
You can search the baseband info on sammobile.com
I found that my ebay purchased unit was bound for Trinidad/Tobago.
Thanks!
Mine is for Colombia (COO)
will it be OK to install a firmware other than the one for colombia? for example I want to change to a firmware from brazil instead or germany.
xeloz01 said:
will it be OK to install a firmware other than the one for colombia? for example I want to change to a firmware from brazil instead or germany.
Click to expand...
Click to collapse
+1
I'd like to know as well - I'd like to install the latest firmware (I9500XXUAMDM I believe?) from another country as my country (S. Africa) is currently on I9500XXUAMDE
prodigyX said:
+1
I'd like to know as well - I'd like to install the latest firmware (I9500XXUAMDM I believe?) from another country as my country (S. Africa) is currently on I9500XXUAMDE
Click to expand...
Click to collapse
1+1
i like to know as well.
*bump*
Yes you can guys
flash via ODIN. Download firmware from samfirmware
Surely flashing a different firmware cant change the origin of the phone?
Be careful, your warranty may not be valid if the phones from a different country >. <
Sent from my GT-I9505 using Tapatalk 2
Okay so upon further investigation I came to learn that the phone I purchased is an unlocked unbranded MT7-L09 from Colombia. I have reverted back to the original firmware, which is B120SP04a. My question is there anyone else here with a Mate 7 from Latin America? If so, have you been able to successfully update to the official Lollipop? If so, what firmware were you on and what region did you install Lollipop from?
Any help and advice is GREATLY appreciated!
TIA
P.S. To determine what region my device was from I did the following:
1. In dialer, dial *#*#2846579#*#*
2. Go to ProjectMenu
3. Go to Network Setting
4. Go to Operator and country info
Mine shows Operator Name as hw and Country Name as nla
According to a guide I saw on CarbonTesla these are some of the other regions:
hw/spcseas – Malaysia
unicomelectric/cn – China
hw/meafnaf – Pakistan
mts/by – Belarus
I live in Central America and I upgraded succesfuly using the guides you find here. Used the official EU firmware and works great.
Zolocofxp said:
I live in Central America and I upgraded succesfuly using the guides you find here. Used the official EU firmware and works great.
Click to expand...
Click to collapse
I live in the U.S., but the phone I purchased is from Northern Latin America. Perhaps the phone you have is European. I have tried all the versions available here and none of them work properly. I have installed both the versions from Malaysia and the one from Europe, each has some type of problem when installed or lack functionality. This is because in fact my phone is not from any of those regions. I saw a guide on how to change the Region for the Huawei Honor 4C, but I cannot find anything for the Mate 7, plus it seems a bit risky to change the region.
I saw a video on youtube of a guy in Peru who successfully updated to Lollipop, but the guy is charging and I'm not willing to pay for something I can do myself. I just need a version of Lollipop that has been released for that Region.
Well, sadly, there is no official lollipop release for LA. MT7-L09 is simply an international version and should work on most regions. I flash this rom:
"MT7-L09_Firmware_C900B324_Android 5.1.1_EMUI 3".
And upgraded from "Jazz-L09 V100R001C00B137". According to the manual, you can directly upgrade from other KK versions.
Zolocofxp said:
Well, sadly, there is no official lollipop release for LA. MT7-L09 is simply an international version and should work on most regions. I flash this rom:
"MT7-L09_Firmware_C900B324_Android 5.1.1_EMUI 3".
And upgraded from "Jazz-L09 V100R001C00B137". According to the manual, you can directly upgrade from other KK versions.
Click to expand...
Click to collapse
Is knuckle snapshot working for you? And did you factory reset before or after updating? Do you still have 5x5 icons available? Can you possibly post the links to the firmwares you used?
Lollipop link
kitkat b137 link
knuckle gestures work... 5x5 work... Only thing missing is being able to change DPI down to 400 which I got used to, working with 420 now.
Ohhhh.... And I did a factory reset after upgrading.
On my phone is showing this:
Operator name:hw
Country name:eu
What it means? I'm still with B137, no OTA for my phone.
Thanks in advance.
ronnie72 said:
On my phone is showing this:
Operator name:hw
Country name:eu
What it means? I'm still with B137, no OTA for my phone.
Thanks in advance.
Click to expand...
Click to collapse
@ronnie72... That means that you have the European version. So you can just download the link posted by @Zolocofxp to upgrade to Lollipop. You may also need to download the update_cust.app which is linked here
Hope you get it working. It took me a while to finally get everything up and running properly, but the link above should point you in the right direction.
@Bonnie1977, thanks! I know now to upgrade with "Local update". But why OTA still unavailable??? Strange ....
ronnie72 said:
@Bonnie1977, thanks! I know now to upgrade with "Local update". But why OTA still unavailable??? Strange ....
Click to expand...
Click to collapse
@ronnie72... I have no idea why no OTA. I live in the U.S., so for me I'll never receive any OTA updates. I just download them from Huawei's site and do the local update.
On my phone is showing this:
Operator name: Claro
Country name: pe
Whats it means?
JCMachine said:
On my phone is showing this:
Operator name: Claro
Country name: pe
Whats it means?
Click to expand...
Click to collapse
I think that means you're locked to Claro, which is the Network provider and country seems to be Peru.
Hello
I ordered a Yotaphone 2 YD201 from china not long ago, and after recieving it I decided to check the phone's details to make sure I'd received the right version.
Unfortunately, I had received a YD206, which won't work well with 4G networks in the UK.
I contacted the seller, and he assured me that the phone I have received is in fact a YD201, stating the following:
"a few yotaphone YD201 was reflashed to YD206 before sending , pls check the phone after delivery . If your phone is YD206 system , don't worry ,it just softwareproblem , the hardware is original YD201 , we can give you reflash rom and tutorial to reflash it back to original YD201 . It will be YD201 system and work with B3/B7/B20 4G net"
My question is; is there a way I can find whether the phone was originally a YD201, or if the version I have been sent is actually just a YD206?
Attached are some screenshots containing my device's info.
Any help would be much appreciated
Thank you
- Luke
Imei = 356... -> yd201
imei = 359... -> yd206
The difference between 206 and 201 are the radio bands supported.
To flash radio only:
fastboot flash modem radio\NON-HLOS.bin
fastboot flash sbl1 radio\sbl1.mbn
fastboot flash rpm radio\rpm.mbn
fastboot flash tz radio\tz.mbn
The chinese model is compatible with 1800Mhz LTE band, that is used in some contries in Europe also,
On the phone dialer if you insert *#06# it will show the phone IMEI.
The I.M.E.I. stands for International Mobile Equipment Identity and is specific for each country,
IMEI numbers starting with 359 will be Chinese YD206, if this is your case, then you must flash the Chinese Radio even if you use other location ROM, the correct installed radio will give you better battery life and network speed.
Keep in mind that the Information on Android -> About the phone -> Model: YD201 or YD206 is not accurate because it gets its information from the ROM and not from the hardware.
Thanks for the help
Tippfehler said:
Imei = 356... -> yd201
imei = 359... -> yd206
Click to expand...
Click to collapse
Good! Looks like my phone was originally a YD201 after all, thank you!
Luke25361 said:
Good! Looks like my phone was originally a YD201 after all, thank you!
Click to expand...
Click to collapse
Hi. I'm sitting with the same dilemma... I received the same explanation from Geeks Planet Store, word for word.
I do not even understand why they would even consider re-fashing something with a higher value (YD201) with the software that would make it look like something of lower value (YD206).
Anyway in your screenshot it says Baseband version ..._CN1_M05. Does this mean it uses the CN radio firmware?
I also downloaded their suggested firmware from the link they sent. In that there are no files under the radio folder. Does that mean the radio firmware is supposed to stay unchanged in this case? If so and if baseband _CN1_ means it is currently running CN radio firmware, does this mean the hardware is really YD206?
One more question: how reliable is the imei number check?
To me the best approach seems to be the suggestion by cvzalez to really test the radio with different firmware and see what works.
JJNNTT said:
Hi. I'm sitting with the same dilemma... I received the same explanation from Geeks Planet Store, word for word.
I do not even understand why they would even consider re-fashing something with a higher value (YD201) with the software that would make it look like something of lower value (YD206).
Anyway in your screenshot it says Baseband version ..._CN1_M05. Does this mean it uses the CN radio firmware?
I also downloaded their suggested firmware from the link they sent. In that there are no files under the radio folder. Does that mean the radio firmware is supposed to stay unchanged in this case? If so and if baseband _CN1_ means it is currently running CN radio firmware, does this mean the hardware is really YD206?
One more question: how reliable is the imei number check?
To me the best approach seems to be the suggestion by cvzalez to really test the radio with different firmware and see what works.
Click to expand...
Click to collapse
I'm confused too as to why they would re-flash a YD201 to a YD206. It doesn't make any sense.
According to this guide, the 'S01_003_3034_CN1_M05' baseband that we have is the one used by YD201s that's supposed to work with all available frequency bands. The reason for the radio folder being empty is so that flashing the phone leaves this baseband as it is.
As for the imei number, after a bit of research I've found that changing this number is relatively easy (even without root), so it's possible that Geeks Planet have just changed the imei number to make our phones seem like YD201s. However, it wouldn't make sense for them to do this and to not also flash the firmware to YD201 as well.
Have you tried flashing the phone to the YD201 using the instructions they've given you? I'm wondering whether or not to try this myself.
Luke25361 said:
Have you tried flashing the phone to the YD201 using the instructions they've given you? I'm wondering whether or not to try this myself.
Click to expand...
Click to collapse
I have not received the phone yet. Even though I ordered it a very long time ago, it was only sent after the Chinese new year holiday.
I am seriously considering not accepting the delivery...
---------- Post added at 11:22 AM ---------- Previous post was at 11:16 AM ----------
Luke25361 said:
According to this guide, the 'S01_003_3034_CN1_M05' baseband that we have is the one used by YD201s that's supposed to work with all available frequency bands.
Click to expand...
Click to collapse
I might be wrong or blind, but when I look it says: "YD206 users have to change their modem components to CN version, in order to have all the available bands working. The modem version is written in "About Phone", under "baseband version". You must have the S01_003_3034_CN1_M05 version. "
JJNNTT said:
I have not received the phone yet. Even though I ordered it a very long time ago, it was only sent after the Chinese new year holiday.
I am seriously considering not accepting the delivery...
Click to expand...
Click to collapse
I've asked the supplier if they can give me any assurance that they would help me out should I follow their flashing instructions and the phone be damaged as a result.
If they can give me this assurance, then I'll give it a go and give you the results.
Reading the comments on the youtube video Geeks Planet have sent me, it seems like this problem isn't exclusive to just Geeks Planet and is rather an issue with the main supplier of these YD201s. The comments state that both coolicool and e-fox have sold people phones with the same issue and have been linked to this same video.
JJNNTT said:
I might be wrong or blind, but when I look it says: "YD206 users have to change their modem components to CN version, in order to have all the available bands working. The modem version is written in "About Phone", under "baseband version". You must have the S01_003_3034_CN1_M05 version. "
Click to expand...
Click to collapse
The wording of this section is a little difficult to interpret. It's not really clear if baseband 'S01_003_3034_CN1_M05' is the original baseband or the international baseband.
Luke25361 said:
The wording of this section is a little difficult to interpret. It's not really clear if baseband 'S01_003_3034_CN1_M05' is the original baseband or the international baseband.
Click to expand...
Click to collapse
If I look at:
S01_003_3034_RU1_M11_P2 : 4.4.3-S01-003-APC.0.3.56C ; 4.4.3-S01-003-HK1.0.3.56A ; 4.4.3-S01-003-EU1.0.3.56A; 4.4.3-S01-003-RU1.0.3.56A
S01_003_3034_RU1_M15_P2 : 4.4.3-S01-003-EU1.0.3.61A ; 4.4.3-S01-003-HK1.0.3.61A ; 4.4.3-S01-003-ME1.0.3.61A
S01_003_4240_RU1_M05 : 5.0.0-APC.1.65 ; 5.0.0-RU.1.1.112 ; 5.0.0-HK.1.1.66
S01_003_4240_RU1_M04 : 5.0.0-APC.1.44; 5.0.0-EU.1.1.39 ; 5.0.0.-ME.1.1.45
S01_003_3034_CN1_M05 : in every CN firmware, in the oldest there's the 3032 version.
Click to expand...
Click to collapse
It really looks like _RU1_ is for RU, APC, HK, EU, ME
and
_CN1_ is only for CN
(So YD206 needs _CN1_ ?)
Guys, you're lucky! You've a YD201, it doesn't matter if the firmware inside is from YD206, it can be easily changed looking at the guide you already linked.
The fact that they flashed a firmware for 206 to a 201 is because their phones are suited for Chinese market.
All you have to do is to flash the RU version (including its radio folder) and see that all LTE bands will be working as expected on a YD201!
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.
TheArt. said:
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.
Click to expand...
Click to collapse
Chinese can easily print a new IMEI on the box
TheArt. said:
Guys, you're lucky! You've a YD201, it doesn't matter if the firmware inside is from YD206, it can be easily changed looking at the guide you already linked.
The fact that they flashed a firmware for 206 to a 201 is because their phones are suited for Chinese market.
All you have to do is to flash the RU version (including its radio folder) and see that all LTE bands will be working as expected on a YD201!
Changing IMEI is possible, but not simple. And if your IMEI in "About phone" is the same on that written on the package of YotaPhone, you're good to go.
IMEI checking is the most reliable way to understand if it's a YD201 or YD206.
Click to expand...
Click to collapse
Thank you for the clarification
I've been sent this reflash rom by the supplier. Would you recommend I use this or use the one on the yota website?
Luke25361 said:
Thank you for the clarification
I've been sent this reflash rom by the supplier. Would you recommend I use this or use the one on the yota website?
Click to expand...
Click to collapse
The one on Yota ftp site are official. I don't know if the firmware the seller sent to you is modified or they just downloaded it via ftp, repacked and sent to you. The firmware version is invisible looking at the files, first you have to flash it and them you will see which version it is.
Personally I would flash only official firmwares.
TheArt. said:
The one on Yota ftp site are official. I don't know if the firmware the seller sent to you is modified or they just downloaded it via ftp, repacked and sent to you. The firmware version is invisible looking at the files, first you have to flash it and them you will see which version it is.
Personally I would flash only official firmwares.
Click to expand...
Click to collapse
Ok, I've decided to try and flash using one of the official firmwares.
If I were to flash to one of the RU firmwares, which one of them would I need to use?
Luke25361 said:
Ok, I've decided to try and flash using one of the official firmwares.
If I were to flash to one of the RU firmwares, which one of them would I need to use?
Click to expand...
Click to collapse
In this guide this information is already written down, anyway use the latest which is: 5.0.0-RU1.1.124.zip.
Let us know which version of firmware and baseband is the ROM the seller provided you!
Luke25361 said:
Ok, I've decided to try and flash using one of the official firmwares.
Click to expand...
Click to collapse
Did it work? Could you test the LTE capabilities with the RU base band?
TheArt. said:
In this guide this information is already written down, anyway use the latest which is: 5.0.0-RU1.1.124.zip.
Let us know which version of firmware and baseband is the ROM the seller provided you!
Click to expand...
Click to collapse
JJNNTT said:
Did it work? Could you test the LTE capabilities with the RU base band?
Click to expand...
Click to collapse
I've managed to flash the phone using the firmware the seller provided. I have also managed to install an OTA update.
I've attached a screenshot with the new device details.
Is this the correct version that I should be on now?
Luke25361 said:
I've managed to flash the phone using the firmware the seller provided. I have also managed to install an OTA update.
I've attached a screenshot with the new device details.
Click to expand...
Click to collapse
At least the baseband changed... which I guess is a good sign. For me now the big question is: Does LTE B20 work? (That is what I need where I live.)
Hello
I want to join the beta peogram for the s10+ and its been a couple of days and i havent been accepted into the program i contacted support and they said its because my phone was imported i bought the phone from UAE and i use it in france.
My CSC country is XEF (france) and when i open SAM INFO the original CSC country is blank
Is there any way i can change the phone's country of origin so i could recieve the update?
Heres some more info
RashedTlass said:
Heres some more info
Click to expand...
Click to collapse
F model, just flash update zip found here
hey07 said:
F model, just flash update zip found here
Click to expand...
Click to collapse
I wish i could my phone version is G975FXXS3ASJG
And the only update zips that i found are G975FXXUZSJL
I dont know if this could damage the phone in some way.
Any ideas?
Thanks
Hello.
I have a problem. I have an unlocked bootloader on my P9 lite mini. I want to lock it, because due to the unlocked bootloader I have problems with, among other things, charging the phone.
Can I lock the bootloader for free?
Livyatan92 said:
Hello.
I have a problem. I have an unlocked bootloader on my P9 lite mini. I want to lock it, because due to the unlocked bootloader I have problems with, among other things, charging the phone.
Can I lock the bootloader for free?
Click to expand...
Click to collapse
Flash service ROM (aka fullOTA aka dload) for your model and regional variant (!). Download
here . Search for SLA-L22 Selina for dual SIM, SLA-L02 Selina for single. Cxx is your region, must match with Cxx in your build number in "Settings - About phone".
Instructions can be found in ReleaseDoc folder.
This process wil erase all your data !
-Alf- said:
Flash service ROM (aka fullOTA aka dload) for your model and regional variant (!). Download
here . Search for SLA-L22 Selina for dual SIM, SLA-L02 Selina for single. Cxx is your region, must match with Cxx in your build number in "Settings - About phone".
Instructions can be found in ReleaseDoc folder.
This process wil erase all your data !
Click to expand...
Click to collapse
hm. I guess there is no soft for my phone. The model is sla-l22c09b145
Livyatan92 said:
hm. I guess there is no soft for my phone. The model is sla-l22c09b145
Click to expand...
Click to collapse
How badly you need B145?
You can flash B143, B144, imo.
Or, download B145 from paid sites (ca 16 euros).
-Alf- said:
How badly you need B145?
You can flash B143, B144, imo.
Or, download B145 from paid sites (ca 16 euros).
Click to expand...
Click to collapse
In Polish realities, 16 euros is quite a lot xD
I checked carefully. It is not possible to purchase this software from Poland. There is no way to pay through a Polish bank.
Livyatan92 said:
I checked carefully. It is not possible to purchase this software from Poland. There is no way to pay through a Polish bank.
Click to expand...
Click to collapse
What is your current EMUI version under B145 build?
-Alf- said:
What is your current EMUI version under B145 build?
Click to expand...
Click to collapse
5.1.3
Livyatan92 said:
5.1.3
Click to expand...
Click to collapse
Just a small question - B144 is the same version of EMUI, why doesn't it suit you?
You have one more option - rebrand to the global version SLA-L22 C432, there is a lot of firmware available for this region. Paid service ($10).
Look here
-Alf- said:
Just a small question - B144 is the same version of EMUI, why doesn't it suit you?
You have one more option - rebrand to the global version SLA-L22 C432, there is a lot of firmware available for this region. Paid service ($10).
Look here
Click to expand...
Click to collapse
Hm. I now have the soft but there is still a problem, my computer can't see the memory card.... wtf? On the phone the card works.
Successful, soft uploaded, unbranded ^^ Thanks, Phone works ok!