note 4 not detected by pc - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi everybody,
I formatted my note 4 using twrp and since my phone bootloops. When I connect it via USB, my pc doesn't detect it at all especially Odin (my phone is in download mode). Other devices like my S6 are normally recognised.
I only have access to recovery and download modes.
I tried to reinstall drivers in my pc but nothing changes.
Help please.

did you deleted some apps/bloatware if yes please restore this app called : MtpApplication , this can be the reason your pc cannot recognize your device.

I think you may formated system partition.so just download custom rom and flashi it via recovery

Related

bootloop problem & in DOWNLOAD MODE the computer not detect phone

hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
talzigi said:
hello,
i did wipe dalvik cache on my galaxy s i9000
and tryed to turn on the phone
the phone enterd into a boot loop,
i tried to enter to recovery mode but without success
so i tried to enter to download mode with success
so i tried to flash new rom with odin but the computer not detect usb...
someone can help me!?
thanks!
Click to expand...
Click to collapse
Do you have kies installed?
Firstly give some information about what Rom you are on
If you are on GB rom search for SGS USB driver. If you are on ICS rom search for Nexus USB driver. If you don't know which ROM was last install both drivers. You can find them on Samsung website. Or check my thread how I almost made a brick.
i have kies installed
and the rom is CM9
and what i need to install to try to get into recovery from the computer?
i have a windows 7 64 bit
you will need the nexus s usb drivers http://nexusshacks.com/nexus-s-hacks/how-to-install-nexus-s-windows-usb-drivers/
If you have lost recovery try flashing the semaphore .tar version in Odin, that usually fixes it
the drivers not helped....
i didnt get the usb not recognized message..
i am connecting the usb and nothing happend.
Make sure you r in usb storage mode,
I'll try to recollect the remedy:
-Uninstall or disable Kies.
-put phone in download mode.
-connect usb from phone direct to pc, Do NOT use unpowered usb hub.
-open windows device manager and update phone drivers browsing to folder of extracted Nexus S usb drivers.
-disconnect usb.
-restart pc.
-while pc boot up, ask yourself:
Why didn't I do research?
-start Odin
-load latest Semaphore_ICS_1.2.6.tar kernel in PHONE field. Uncheck repartition.
-put sgs in download mode.
-connect usb and flash.
Check cable. Go to other comp and look if there is response about installing driver.

Team win recovery project mounting issues

As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Still cant mount. i notice ond evide manager it says the drivers are missing for SAMSUNG_Android yet i have installed samsung kais!
jonneymendoza said:
As teh title says i am using v2.5.0.0 of this recovery rom for my samsung s4 device.
The issue is that i cannot mount my SD card whilst in recovery mode.
It never appears on my windows 8 machine when i connect my device in recovery mode.
I have all the usb drivers for my device installed and that is how i originally put a rom on it when i was running a stock rom.
Now that i did a wipe i obviously cannot mount my device on a normal running stock rom because its removed and i am trying to install a new one.
How can i access and transfer files whilst in recovery mode?
Do i need any additional drivers?
Click to expand...
Click to collapse
Uninstall KIES and any other samsung usb installed utilities first.
Then download the official Samsung USB drivers for windows here: http://developer.samsung.com/board/download.do?bdId=0000000700&attachId=0000000001
After all the uninstalls are done reboot computer and install the official samsung usb drivers.
Once that's done reboot computer one more time and then your phone should and will
recognize your phone unless you have a bad cable or a non-functioning usb port in computer.
Good luck!

SM-A500FU can't be detected by a PC, booting into recovery boots the system.

Hello,
I have installed a custom rom (Marshmallow) for my SM-A500FU through the adb. Now when I want to install a different rom I have to either boot into TWRP and I can't do that because booting into recovery simply restarts a phone, or I have to boot into Download mode and install it with the adb. The problem is that when the system is running, the phone simply charges, no Windows notifications or devices appear and when the phone is in Download mode Windows detects that a device is plugged in but can't recognize it. I have all the adb drivers, KIES and all that so it's not a problem. Can I somehow boot into TWRP or make Windows recognize my phone so I can use adb?
Thanks.
before installing a rom, have you wiped system, cache, dalvik and data? If yes try with a hard reset and if it doesn't work, too flash stock firmware
Hey,
yes, I wiped everything, I have flashed many roms earlier and I believe I have flashed it properly. I have managed to get into TWRP so I can actually flash FWs. I have only updated my rom to the newest CW13 build there is for my A5. Is there any way to flash a stock FW (for example a XEO KitKat) without ODIN? I can only use ADB through TCPIP and TWRP, so there is no way for me to flash it through ODIN.
Thanks.
so, if you press power+home+vol- it doesn't reboot in download mode, right?
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
whzq said:
It does boot into the Download mode. The problem is that when I plug the phone into my PC in Download mode it says that the USB Device is not recognized in Windows with 'A request for the USB device descriptor failed' error. When I plug it in when the phone is booted normally into android, it just charges, Windows doesn't see it at all.
Click to expand...
Click to collapse
Well, you can't flash samsung firmwares with twrp. Try flashing another rom through twrp
Alright, I have tried to flash multiple ROMs. Currently sitting on a Lollipop. Nothing changed, though. On every single ROM the problem still persists. It's not a problem with the PC as I've tried to connect my A5 to a laptop with freshly installed Windows and KIES and it behaved the same way as on my PC. The cable is fine as well, I have tested it with my old SGS3, it worked just fine on both my PC and laptop. Frankly, I have no idea what to do next, I'm starting to think that the port is physically broken. It's weird though, as I can still charge my phone and there is a response when the phone is in Download mode, just that Windows can't recognize it.
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
zyxw-androidiani said:
Try with adb command "adb reboot recovery" if it doesn't work you can downlaod odin mobile from play store and flash stock firmware!
Do you have odin for windows ?
Click to expand...
Click to collapse
Yes, ihlf his device can boot he can use mobile odin. Have you tried with other PCs, just to see it isn't a problem of your pc?
In my experience usb device descriptor errors are related to the specific PC the error occurs on due to device driver conflicts, but if you get the same error on another pc then it could be the hardware.
I'd certainly be trying another cable first on a fresh PC.
Anyway regardless of all that you can flash the stock firmware with FLASHFIRE available on play as long as you have root.
Sent from my SM-T280 using XDA-Developers mobile app

Can i install rom/stock firmware/custom recovery via my stock recovery(i9505)

Can i install any rom,recovery, with the help of stock recovery?
My device is not booting at all, it stock at galaxy s4 logo.
I can go to stock recovery & download mode
My pc & odin is not detecting my phone in download mode& recovery mode(I had changed about 10 data cables & 2 laptops windows 7,10 & all version of odin, I had tried installing every samsung drivers,kies, just every thing)
So plz help me out.
No, you can't.
And since your phone is not being detected, the only solution is to take it to a shop.
But if you can boot into odin or download mode then you have still a chance. Be sure you have a samsung driver to be able your computer and odin detect your phone
Is it possible the phone's USB port is damaged?

SM-G900F stuck in download mode

TL;DR – I am stuck in ODIN MODE and my PC (and Odin) does not recognize device once it is connected via USB.
Hi to all,
I am aware that this device is bit outdated, but I have dug it up from the depths of my drawers and decided to try to update its Lineage OS version. I have downloaded TWRP and custom ROM alike, but then I have made severe mistake – I have flashed TWRP in to recovery as well as to bootloader. Now I am stuck in ODIN MODE. Which would not be a problem, if Odin could detect my device on my PC, which is not happening. I am on WIN11. The steps what I have tried:
1. I have downloaded drivers from https://developer.samsung.com/android-usb-driver.
2. I have tried multiple versions of ODIN (v3.09, v3.12, v3.13) which I have ran as administrator.
3. I have tried to connect SM-G900F on older notebook with WIN7 (HP Mini 5102) and installed drivers from step 1.
4. As last resort, I have downloaded and installed Samsung Kies (on WIN11), which – as I expected – have not solved my problem at all.
I am not sure what step should I take next. Do you have any ideas? Thank you in advance for any recomendations!
Best regards,
Neuro
Try this XDA site search & add keywords to taste: site:forum.xda-developers.com s5 odin mode not recognized
***

Categories

Resources