My network only connect to 2G (EDGE) only. I'm using Custom ROM "Chroma", Android "6.0.1 r10" and Kernel "CallMeAldy". Any solution ? ???
i think the problem is, you have not activated 3g on your sim. First activate 3g/4g on your network than get settings, enable package and than use. Also it might be problem with your network and make sure 3g/4g is available in your city.
Is the phone using the latest bootloader and radio?
inaqi69 said:
i think the problem is, you have not activated 3g on your sim. First activate 3g/4g on your network than get settings, enable package and than use. Also it might be problem with your network and make sure 3g/4g is available in your city.
Click to expand...
Click to collapse
I have 3G+4G package and settings...
audit13 said:
Is the phone using the latest bootloader and radio?
Click to expand...
Click to collapse
How to check and can you give me a link.
Boot info fastboot mode and look at the bottom of the screen. The latest baseband is m9615a-cefwmazm-2.0.1701.07. The latest bootloader is makoz30f.
My baseband is m9615a-cefwmazm-2.0.1701.03.
My bootloader is makoz30d.
Please give a link of latest things sir...
I'm using latest custom ROM Chroma, Android version 6.0.1 r10.
TalhaMoazSarwar said:
I have 3G+4G package and settings...
Click to expand...
Click to collapse
try changing your location. i mean go outside of your home/office and than turn 3g on.
audit13 said:
Boot info fastboot mode and look at the bottom of the screen. The latest baseband is m9615a-cefwmazm-2.0.1701.07. The latest bootloader is makoz30f.
Click to expand...
Click to collapse
I updated my phone to latest baseband & latest bootloader. Still not working...
inaqi69 said:
try changing your location. i mean go outside of your home/office and than turn 3g on.
Click to expand...
Click to collapse
3G+4G fully supported inn my area... My other friends use.
I suggest loading a stock rom to see if that helps.
TalhaMoazSarwar said:
3G+4G fully supported inn my area... My other friends use.
Click to expand...
Click to collapse
Did you tried a full wipe instalation of that rom and installed the last radio and bootloader?
LoveSick55 said:
Did you tried a full wipe instalation of that rom and installed the last radio and bootloader?
Click to expand...
Click to collapse
I installed a latest version of bootloader & modem and i install this rom after full wipe. 3G not working... Which version of radio am i use ?
Related
I recently updated to the MKF update on my i9505 BTU. Prior to this my mobile internet was fine. Since the update I am unable to get any mobile internet. All settings are checked to ensure I should be, the APN hasn't been deleted and I've got no idea why this should have changed anything. I'm on the EE mobile network.
Any ideas?
KinetiClutch said:
I recently updated to the MKF update on my i9505 BTU. Prior to this my mobile internet was fine. Since the update I am unable to get any mobile internet. All settings are checked to ensure I should be, the APN hasn't been deleted and I've got no idea why this should have changed anything. I'm on the EE mobile network.
Any ideas?
Click to expand...
Click to collapse
Try to set your apn again and once your done, reboot your phone.
Repulsa said:
Try to set your apn again and once your done, reboot your phone.
Click to expand...
Click to collapse
Just did it and now I have 1 bar of H so i suppose better than nothing. Weird that even though it uses the same APN settings that happens.
Any reason why?
KinetiClutch said:
Just did it and now I have 1 bar of H so i suppose better than nothing. Weird that even though it uses the same APN settings that happens.
Any reason why?
Click to expand...
Click to collapse
Try to play with your Network mode , Or try to flash a different Modem from here Tips: Your provider actually uses Mk9 try and flash that modem mate. btw dont forget to click thanks button if i help you LOL. Have a nice day.
Repulsa said:
Try to play with your Network mode , Or try to flash a different Modem from here Tips: Your provider actually uses Mk9 try and flash that modem mate. btw dont forget to click thanks button if i help you LOL. Have a nice day.
Click to expand...
Click to collapse
Can I flash a modem without setting off the KNOX though?
KinetiClutch said:
Can I flash a modem without setting off the KNOX though?
Click to expand...
Click to collapse
Flashing any modem doesnt trigger knox mate
Sent from Hell ?
Hi everybody
Yesterday installed a new version of http://forum.xda-developers.com/galaxy-s4-att/development/movin-please-posts-t2864506
I do all the movements and a correct installation; but when I try to make a call a message saying "No registered" or like "no service" appears. This happens in all the iB4STiD new version of roms in every Kernels.
The carrier is "CLARO" and the kind of band is UMTS or HSPA+
Please help!
kevinlopz said:
Hi everybody
Yesterday installed a new version of http://forum.xda-developers.com/galaxy-s4-att/development/movin-please-posts-t2864506
I do all the movements and a correct installation; but when I try to make a call a message saying "No registered" or like "no service" appears. This happens in all the iB4STiD new version of roms in every Kernels.
The carrier is "CLARO" and the kind of band is UMTS or HSPA+
Please help!
Click to expand...
Click to collapse
Did you configure the APN settings for your carrier? If not, you can find the menu in...
Settings > Wireless and Networks > More Settings > Mobile Networks > Access Point Names
I am on ATT, so I cannot verify if these work, but I did find these...
http://forum.xda-developers.com/showthread.php?t=2229220
guut13 said:
Did you configure the APN settings for your carrier? If not, you can find the menu in...
Settings > Wireless and Networks > More Settings > Mobile Networks > Access Point Names
I am on ATT, so I cannot verify if these work, but I did find these...
http://forum.xda-developers.com/showthread.php?t=2229220
Click to expand...
Click to collapse
Thanks for reply! The problem isn't in the apn or internet conection... Is in all the carrier registration, that means can't call or send sms.
Sometimes the 4G symbol appears and I can navigate in internet but don't allow me to call.
kevinlopz said:
Thanks for reply! The problem isn't in the apn or internet conection... Is in all the carrier registration, that means can't call or send sms.
Sometimes the 4G symbol appears and I can navigate in internet but don't allow me to call.
Click to expand...
Click to collapse
APN settings is all I had. I have an ATT on ATT network, so I do not have too much experience configuring the phone on other carriers.
In the OP, you mentioned "This happens in all the iB4STiD new version of roms in every Kernels." Did it work on his older ROMs or another dev's ROM? If so, I'd suggest flashing one of those to see if it is still working.
guut13 said:
APN settings is all I had. I have an ATT on ATT network, so I do not have too much experience configuring the phone on other carriers.
In the OP, you mentioned "This happens in all the iB4STiD new version of roms in every Kernels." Did it work on his older ROMs or another dev's ROM? If so, I'd suggest flashing one of those to see if it is still working.
Click to expand...
Click to collapse
Yes, only happen when I have a iB4STiD ROM installed, in another case everything is working but isn't the best ROM. I want the GOLDENFINGER or GOLDENEYE
PD I upload the information in about and state. Screenshots
kevinlopz said:
Yes, only happen when I have a iB4STiD ROM installed, in another case everything is working but isn't the best ROM. I want the GOLDENFINGER or GOLDENEYE
PD I upload the information in about and state. Screenshots
Click to expand...
Click to collapse
Confirmed! I try with every Kernel and the solution is only install the GE 37 or less... can somebody speak to iB4STiD
PM him with ALL your details--
Did you wipe (not format) System/Data/Caches? I do it 3X
If you don't have lte, did you change your preferred data choice to hspa+/3g or whatever choice has no lte in it.
Pull and reinsert your sim--
rugmankc said:
PM him with ALL your details--
Did you wipe (not format) System/Data/Caches? I do it 3X
If you don't have lte, did you change your preferred data choice to hspa+/3g or whatever choice has no lte in it.
Pull and reinsert your sim--
Click to expand...
Click to collapse
Yes, yes and yes. I do all, but nothing change. I installed a old version of GE (37, 38, 38.1) doesn't work.
Now I'm trying with GE 30. First I trying SHOstock and seems work.
I got more information for you!
The problem started when I installed a KK 4.4.4 Rom, before this never happened anything and always a custom rom allowed me to call.
PD: ONLY with the stock rom (I337UCUAMDL_I337ATTAMDL_ATT) and a based 4.4.4 custom rom is installed it can use the phone for call. Not just the internet!
Anybody knows something about that???
kevinlopz said:
Anybody knows something about that???
Click to expand...
Click to collapse
try this ...
1. install a 4.4.2 stock tw rom for ur carrier via odin
2. flash a custom recovery
3. clean iwipe!!
4. flash my rom
if u never took a 4.4.2 official update that could be ur issue
iB4STiD said:
try this ...
1. install a 4.4.2 stock tw rom for ur carrier via odin
2. flash a custom recovery
3. clean iwipe!!
4. flash my rom
if u never took a 4.4.2 official update that could be ur issue
Click to expand...
Click to collapse
THANKS FOR ANSWER!
The I337UCUFNB1 baseband?
kevinlopz said:
THANKS FOR ANSWER!
The I337UCUFNB1 baseband?
Click to expand...
Click to collapse
The nb1 tar will work
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
The nb1 tar will work
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
But to install the NB1, Its able to root and Loki'd
Its all the same thing of UCUAMDL?
Its all safe and secure, because I've sim unlock.
Can you paste a treat of any tutorial?
kevinlopz said:
But to install the NB1, Its able to root and Loki'd
Its all the same thing of UCUAMDL?
Its all safe and secure, because I've sim unlock.
Can you paste a treat of any tutorial?
Click to expand...
Click to collapse
No it's not at all the same as mdl!!!! If you're on mdl firmware Do Not flash nb1. Are you on mdl firmware?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No it's not at all the same as mdl!!!! If you're on mdl firmware Do Not flash nb1. Are you on mdl firmware?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I attached a image of the about screen
kevinlopz said:
I attached a image of the about screen
Click to expand...
Click to collapse
You are on mdl firmware. It's android 4.2.2. You could try flashing a new modern. See rockrat's modems in the general forum
Edit, http://forum.xda-developers.com/showthread.php?p=46762296
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You are on mdl firmware. It's android 4.2.2. You could try flashing a new modern. See rockrat's modems in the general forum
Edit, http://forum.xda-developers.com/showthread.php?p=46762296
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Wait, will change something if installing a modem?
kevinlopz said:
Wait, will change something if installing a modem?
Click to expand...
Click to collapse
No, it'll just flash the modern. Nothing else will change. I'm not sure if it will help you though. It could, modems sometimes work better and other times not. It depends on where you are and what works better in that location. You can always flash back to the mdl modem, i.e. baseband
Sent from my Nexus 5 using XDA Free mobile app
kevinlopz said:
Wait, will change something if installing a modem?
Click to expand...
Click to collapse
Changing the modem resolves the problem?
I can call with the stock rom (MDL) and 4.4.4 Roms like KANGARAT, BUT I can't call with GOLDENEYE or others kitkat based roms
I'm scared
I am running an old CM 10.2.1 rom and need to update my phone's PRL. I may plan a trip to Canada and need to make sure my phone will work. Though my ROM is old, what is the procedure for updating PRL?
Make a backup of your custom ROM then flash a TW based ROM. Update your prl then restore your CM ROM.
Beezer80 said:
Make a backup of your custom ROM then flash a TW based ROM. Update your prl then restore your CM ROM.
Click to expand...
Click to collapse
Once abroad , what mode do I need to put my phone in for international service? Do I use the "system select mode" under mobile networks, change to auto International roaming?
jp0213x said:
Once abroad , what mode do I need to put my phone in for international service? Do I use the "system select mode" under mobile networks, change to auto International roaming?
Click to expand...
Click to collapse
That sounds correct. Preferred Network Type = Global
Beezer80 said:
That sounds correct. Preferred Network Type = Global
Click to expand...
Click to collapse
Thanks
jp0213x said:
Thanks
Click to expand...
Click to collapse
Update,
Was in Canada over the weekend and found out this ROM doesn't work at all for international roaming. Signal on the phone was very poor and the phone couldn't access the web. I did update the PRL before leaving. I had to restore my phone back to stock in order to use. Anyone have any luck using a custom that works well international roaming?
jp0213x said:
Update,
Was in Canada over the weekend and found out this ROM doesn't work at all for international roaming. Signal on the phone was very poor and the phone couldn't access the web. I did update the PRL before leaving. I had to restore my phone back to stock in order to use. Anyone have any luck using a custom that works well international roaming?
Click to expand...
Click to collapse
PRLs won't do anything for international roaming unless your phone supports the bands those carriers use
I have an s4 and it roamed fine on Rogers network under my stock firmware. Didn't work well with the custom rom.
jp0213x said:
I have an s4 and it roamed fine on Rogers network under my stock firmware. Didn't work well with the custom rom.
Click to expand...
Click to collapse
Weird, if you're on stock, then update PRL, and then flash custom ROM it should carry over
mattzeller said:
Weird, if you're on stock, then update PRL, and then flash custom ROM it should carry over
Click to expand...
Click to collapse
Signal was non existent few calls came through just about it. No web access.
jp0213x said:
Signal was non existent few calls came through just about it. No web access.
Click to expand...
Click to collapse
Maybe an APN issue
Hey everyoe!my phone was originaly on chinese versino but my seller sad that he sent me global version phone .
so i had to transform my phone to global version and finally i did it.
the proble is taht my phone recognise my sim card but i have no services and when i want to call someone its sasy that the airplane mode is active. but its not turned on .
so far i tried to wiped out cache and factory reset but didnt solve it.
Louisthefirst said:
Hey everyoe!my phone was originaly on chinese versino but my seller sad that he sent me global version phone .
so i had to transform my phone to global version and finally i did it.
the proble is taht my phone recognise my sim card but i have no services and when i want to call someone its sasy that the airplane mode is active. but its not turned on .
so far i tried to wiped out cache and factory reset but didnt solve it.
Click to expand...
Click to collapse
Do a screenshot of your apn settings.
SilentEYE said:
Do a screenshot of your apn settings.
Click to expand...
Click to collapse
Here is the link for the pics
https://ibb.co/dbXUJG
https://ibb.co/iWhUJG
https://ibb.co/ergZkw
By the way when I want to turn off the sim it says that ”failed”
Louisthefirst said:
By the way when I want to turn off the sim it says that ”failed”
Click to expand...
Click to collapse
Please do another screen of settings with system and baseband version.
Maybe you did something wrong with the modem.
I have t mobile Germany and we have a password for the apn settings. Can you check your settings for your country?
SilentEYE said:
Please do another screen of settings with system and baseband version.
Maybe you did something wrong with the modem.
I have t mobile Germany and we have a password for the apn settings. Can you check your settings for your country?
Click to expand...
Click to collapse
https://ibb.co/nyjh7b
https://ibb.co/nEg6YG
As you can see my phone recognise that there is a SIM card but my signal strength bar is zero in both SIM slots
LTE network in use in my country Hungary
800,1800,2600 MHz
Louisthefirst said:
LTE network in use in my country Hungary
800,1800,2600 MHz
Click to expand...
Click to collapse
I have been last week in hungary and T Mobile HU was working fine on my axon 7 G Version.
I would recommend two things:
Check if your SIM Card is working fine with your device, or go into a T Mobile store and set another test card in. Or find someone who has another sim card for you.
But as far as I understood you, with the chinese ROM you had a signal?
Check if you can see the available networks in your area. (Mobile providers settings)
Double check your APN settings.
My SIM card work well in my other phone so it must be within my axon 7. My axon 7 I can turn on off the airplane mode and it can see that the sim card is T-Mobile but can't call because it says that I have to turn off airplane mode.
Is it possible to change baseband version?
Or I should try to flash some other region official rom?
Well Ian not sure if it was Chinese because only the mifavor recovery was Chinese.
Now it's in English
Louisthefirst said:
Is it possible to change baseband version?
Or I should try to flash some other region official rom?
Click to expand...
Click to collapse
Just do that. There must be a problem while your last flashing process.
Can i flash roms that are not edl with miflash?
Because i wanted to ooen bootloader in edl mod but failed so i had to flased rom edl.
Louisthefirst said:
Can i flash roms that are not edl with miflash?
Because i wanted to ooen bootloader in edl mod but failed so i had to flased rom edl.
Click to expand...
Click to collapse
You probably have no signal because you flashed another model's ROM through EDL. you have the wrong NHLOS.bin file.
You have to follow a guide to unlock the bootloader ON YOUR PHONE MODEL (A2017!) then you can fix it
Cant i solve it simply flashing the right rom ?
Do i need to unlock it?
If so can you help me where to go?
Louisthefirst said:
Cant i solve it simply flashing the right rom ?
Do i need to unlock it?
If so can you help me where to go?
Click to expand...
Click to collapse
I don't really know if flashing the corresponding ROM will fix your phone, but I think it will. You might like MiFavor 5.0 anyways
I'll send you the EDL package link for an A2017 rom. flash it and if you have signal, update through OTA. No need to unlock
Right now i tried global edl rom.
And chinese as well.
Sure i would like to try it
Louisthefirst said:
Right now i tried global edl rom.
And chinese as well.
Sure i would like to try it
Click to expand...
Click to collapse
You shouldn't have tried the G rom! You messed up the modem in the process. That's why I don't know if flashing the chinese ROM again will magically fox things. But it's worth trying
The ROM is this one. I think it is MiFavor 4.2.
https://androidfilehost.com/?fid=817550096634790940
---------- Post added at 09:01 PM ---------- Previous post was at 09:00 PM ----------
Louisthefirst said:
Right now i tried global edl rom.
And chinese as well.
Sure i would like to try it
Click to expand...
Click to collapse
Wait, don't flash. What's the model on the back of the phone? And did you buy it through Aliexpress?
At first I wanted to change the rim because I couldn't record at 60fps.
Do you know this rim that I am about to try can record at 60fps?
Louisthefirst said:
At first I wanted to change the rim because I couldn't record at 60fps.
Do you know this rim that I am about to try can record at 60fps?
Click to expand...
Click to collapse
Could you reply to the question lol
Just use another camcorder app
Hey guys,
I'm using a i9505 as a media device at home. As opposed to all my other devices this phone loses its connection often every few minutes and also often doenst reconnect itsself. Its super annoying. I cant stream nothing or make a internet call.
Has anyone any idea? Flash a modem?
I'm on LOS 16.1
slev!n said:
Has anyone any idea? Flash a modem?
Click to expand...
Click to collapse
Flashing a modem won't hurt. You should be on the last one for your device anyway.
Strephon Alkhalikoi said:
Flashing a modem won't hurt. You should be on the last one for your device anyway.
Click to expand...
Click to collapse
Does it really not matter whether I download the variant of my country (...HPK2) or the latest without my country code (... HQK1)?
slev!n said:
Does it really not matter whether I download the variant of my country (...HPK2) or the latest without my country code (... HQK1)?
Click to expand...
Click to collapse
Your carrier stopping at HPK2 simply means they didn't bother putting any work into what to them is a minor update. HQK1 will work on your device without a problem.
Hey again, I flashed the latest STOCK I could find on my i9505. But with STOCK i even cant enable wifi. I already did a factory resst but it doenst help.
Should I try flashing any modem? Or what option do I still have?
slev!n said:
Hey again, I flashed the latest STOCK I could find on my i9505. But with STOCK i even cant enable wifi. I already did a factory resst but it doenst help.
Should I try flashing any modem? Or what option do I still have?
Click to expand...
Click to collapse
If you unpack the ROM package I believe you will find a .bin file for the wifi you can flash in Odin.