Database Users

any one have a solution ?

i have install mod clock recovery to my phone
& it is ok but when i try with nofills
the phone restart & keep on the logo i try hardrest but it is fail
now i can enter the normal recovery
no official rom here ? and how can i flash it ?
or any easy solution ?

download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new

Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
thank u it s work thank u

RSD LITE is not detecting phone
Geko90 said:
download a stock rom, enter bootloader mode by pressing up-button and power while turning on the phone, connect it to your pc (make sure you have RSD Lite on your pc) and flash... your flipout will look like new
Click to expand...
Click to collapse
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S

sunilkumar1 said:
sir,
rsd lite is not detecting my phone.
i've bricked my phone by overclocking,
now when i start my phone it boots up to m logo only.
and i can still open my bootloader by holding X and power button,but this is not detected by RSD lite
kindly help me
regards,
Sunil Kumar S
Click to expand...
Click to collapse
Hey Sunil!
It is Up Arrow key on d-pad and powerup key, it should take you to a black screen with white characters.
Try RSD 5.6 and be patient.
Regards
hsr

The X takes you to recovery and up arrow key to the bootloader
somewhere in africa

Gionee Elife E6 Hardbrick

Hi,
My E6 is hardbricked, doesnt power on, only shows red light when usb is connected. I flashed stock rom with sp flash tool but stays the same. Please someone help me recover my E6.

Help please!
Vibore said:
Hi,
My E6 is hardbricked, doesnt power on, only shows red light when usb is connected. I flashed stock rom with sp flash tool but stays the same. Please someone help me recover my E6.
Click to expand...
Click to collapse
Man, do you have the files to use with SP FLASH TOOLS? I am with some problems on my phone, and the sp flash tools always gives me error 8038! Help please!

Did you try flash in "Emergency Mode"?

Vibore said:
Hi,
My E6 is hardbricked, doesnt power on, only shows red light when usb is connected. I flashed stock rom with sp flash tool but stays the same. Please someone help me recover my E6.
Click to expand...
Click to collapse
If you havent totally screwed up the phone, you can always go to the recovery mode (even if the phone doesnt power on) by pressing the 'up' volume button and the power button. Once you get to the recovery mode (or manage to bring up the boot logo), keep pressing the power button till it turns off completely. Now you can use SP flash tool to flash your ROM.

rln_xda said:
If you havent totally screwed up the phone, you can always go to the recovery mode (even if the phone doesnt power on) by pressing the 'up' volume button and the power button. Once you get to the recovery mode (or manage to bring up the boot logo), keep pressing the power button till it turns off completely. Now you can use SP flash tool to flash your ROM.
Click to expand...
Click to collapse
Thanks for the reply.
I flashed it sucefully over and over with SP flash tool, the flashing procedure completes 100%. But the phone stays the same.
When i conect the charger the red light goes on 1 second and then goes off. Thats all the phone does.

biokiller said:
Did you try flash in "Emergency Mode"?
Click to expand...
Click to collapse
Whats that friend?

Elife E7 doing the same thing!
I tried to change some settings in my build.prop file and my Elife E7 and restarted the phone, but it wont boot. Now it is doing the same thing like urs. Red led light just goes on after some seconds and goes of again. can't start in recovery mode or anything. Please somebody help. i just bought this phone. is there anybody who knows why these gionee phone act like this?

Flashed wrong image. ZUK Z1 is bricked.

Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?

Take it to service center they dont even know what happan and repair or replace your phone as my expiriance same done on my old infocus m2

Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk

Use QPST and flash ZUI with that. I unbricked mine with that.

Kounjula Rahul said:
Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
All kinds of physical inputs and button combinations fail.
YoolaCro said:
Use QPST and flash ZUI with that. I unbricked mine with that.
Click to expand...
Click to collapse
QPST does not recognise the phone. Drivers installed and all set up al right, sadly.

Do as i say

i also did same mistake
tried to install twrp with flashify ...my phone too keeps on restarting every second..please help me guys..
if you got any solution to this means please help me

Did you solve the problem? Mine is having the same problem!

Please Help Me.....!!
SarthakSL said:
Did you solve the problem? Mine is having the same problem!
Click to expand...
Click to collapse
Did anyone find solution of it?
Because I accidently flashed one plus 1 twrp in zuk z1. Now device only shows zuk logo and after that complete black out. I also tried the solution of hardbricked( Volume up button) phone but can't fix this problem. I am not able to go to fastboot mode. Is my device is hardbricked or softbricked? Any one suggestion will be very helpful to me and thanks in advance.
---------- Post added at 06:48 PM ---------- Previous post was at 06:18 PM ----------
Giop114 said:
Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?
Click to expand...
Click to collapse
You found solution?
if found please please give me

It seems there is a solution. Keep pressing the Vol+ Vol- and the Power Button until the phone switches off. The phone will reboot. This time when you press Power Button, it will not restart. Hope I helped you.

Refer this
https://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833

Bricked Moto X Pure, no fastboot/adb

Completely wiped all files while manual cleanup via twrp. Next thing I remember is rebooting device which is stuck in moto boot logo. Can't even switch off, holding power button for 8/10 sec reboot device to same boot logo loop. No fastboot/adb as I can't get to recovery mode. I have Moto X Pure, XT1575. Any hope?

navnit1 said:
Completely wiped all files while manual cleanup via twrp. Next thing I remember is rebooting device which is stuck in moto boot logo. Can't even switch off, holding power button for 8/10 sec reboot device to same boot logo loop. No fastboot/adb as I can't get to recovery mode. I have Moto X Pure, XT1575. Any hope?
Click to expand...
Click to collapse
Holding volume down + power won't boot into bootloader?

navnit1 said:
Completely wiped all files while manual cleanup via twrp. Next thing I remember is rebooting device which is stuck in moto boot logo. Can't even switch off, holding power button for 8/10 sec reboot device to same boot logo loop. No fastboot/adb as I can't get to recovery mode. I have Moto X Pure, XT1575. Any hope?
Click to expand...
Click to collapse
You probably deleted your operating system (ROM), you need to get into the bootloader and either flash a new ROM or use fastboot to flash back to stock.
Press and hold Power until the screen goes out, then press Power + Vol Dn immediately and hold until the bootloader screen comes up (might have to play with the timing a little). You should then be able to access fastboot or start TWRP.

jason2678 said:
Holding volume down + power won't boot into bootloader?
Click to expand...
Click to collapse
Thank You, I was able to get to boot loader, you saved my device

acejavelin said:
You probably deleted your operating system (ROM), you need to get into the bootloader and either flash a new ROM or use fastboot to flash back to stock.
Press and hold Power until the screen goes out, then press Power + Vol Dn immediately and hold until the bootloader screen comes up (might have to play with the timing a little). You should then be able to access fastboot or start TWRP.
Click to expand...
Click to collapse
Thanks acejavelin, I was able to get to boot loader as you suggested, then fastboot flash to factory image from Motorola site. Appreciate quick reply.

Glad it worked...
Sent from my Motorola XT1575 using XDA Labs

acejavelin said:
Glad it worked... Sent from my Motorola XT1575 using XDA Labs
Click to expand...
Click to collapse
I posted this (below) to another thread, but I've seen how well you apply your knowledge base to these types of situations, and I thought I'd run it by your expertise:
Got a NOS Moto X Pure Edition xt1575 and experienced some kind of rooting glitch after having unlocked the bootloader and installing TWRP. Long story short, after a frantic bout of wiping and swiping, the OS is gone, I can't select the micro SD in TWRP, and adb/fastboot only sees the phone in recovery. I found this thread, which seemed promising, but it appears to be a no-go without access to the bootloader. I've flashed so many custom ROMS to a tablet I have, that I thought this phone would be a cakewalk, but it seems to have rolled right over me. So, is it time to slather some mortar on this thing and add it to the wall (bricked), or is there a Hail Mary play, or Jiu Jitsu move out there somewhere? Anything...ANY-THING would be welcome and much appreciated. Thank you.

tswrench said:
I posted this (below) to another thread, but I've seen how well you apply your knowledge base to these types of situations, and I thought I'd run it by your expertise:
Got a NOS Moto X Pure Edition xt1575 and experienced some kind of rooting glitch after having unlocked the bootloader and installing TWRP. Long story short, after a frantic bout of wiping and swiping, the OS is gone, I can't select the micro SD in TWRP, and adb/fastboot only sees the phone in recovery. I found this thread, which seemed promising, but it appears to be a no-go without access to the bootloader. I've flashed so many custom ROMS to a tablet I have, that I thought this phone would be a cakewalk, but it seems to have rolled right over me. So, is it time to slather some mortar on this thing and add it to the wall (bricked), or is there a Hail Mary play, or Jiu Jitsu move out there somewhere? Anything...ANY-THING would be welcome and much appreciated. Thank you.
Click to expand...
Click to collapse
I don't understand... Does the phone not boot to the bootloader when you hold the volume key? Have you tried my return to stock thread?

i need help if some one can help me that would be great

hello to any one reading this. i have a lg g6 ls993 and i wanted to see if i could get rid of the bloatware and unlock the boot loader at the same time so i downloaded the us997 firmware and now my phone is stuck on a screen with instructions on how to unlock the boot loader and i do not have the file to unlock the boot loader for a us997. would any one be able to help me with any info on how to flash back or if some one has a boot loader unlock bin file for the us997 i can use that would be great. thank you in advance for any help

Unfortunately, the unlock.bin file is specific to your IMEI, so you can't unlock the bootloader of your device. You should also never ever flash the firmware from another device to your device (for example us997 to ls993), since it will likely hard Brick your device. Now to your problem, are you in the os, recovery or bootloader? Can you provide some screenshots if possible?

GrovPastaSwag03 said:
Unfortunately, the unlock.bin file is specific to your IMEI, so you can't unlock the bootloader of your device. You should also never ever flash the firmware from another device to your device (for example us997 to ls993), since it will likely hard Brick your device. Now to your problem, are you in the os, recovery or bootloader? Can you provide some screenshots if possible?
Click to expand...
Click to collapse
unfortunately i do not have anything to take a pic of the screen. on boot it shows the lg logo then it doesn't go in to the os it just pops up with the instructions to unlock the boot loader and i can not get around it

Knuckles666 said:
unfortunately i do not have anything to take a pic of the screen. on boot it shows the lg logo then it doesn't go in to the os it just pops up with the instructions to unlock the boot loader and i can not get around it
Click to expand...
Click to collapse
Boot into download mode, then flash YOUR stock KDZ file.

basicreece said:
Boot into download mode, then flash YOUR stock KDZ file.
Click to expand...
Click to collapse
thats the problem it will not let me turn it off by pressing and holding the power button or any command. all it does is reboot then goes to the same screen. i can try again and if it works finally do you know where i can get a stock kdz file for sprint? i supposedly found a tot file for it so far

Hold power and vol down until its completely off (15 sec) then release and quickly press and hold power and vol up.
This will put it in download mode. This is a fail safe.

basicreece said:
Hold power and vol down until its completely off (15 sec) then release and quickly press and hold power and vol up.
This will put it in download mode. This is a fail safe.
Click to expand...
Click to collapse
it still didnt work. its ok i have had it less then a year and its under warentee its not rooted at all. thanks for your help though