Is it possible to boot the viewpad 10s from usb?
Related
Hi!
Yestarday I installed VegaComb on my POV Tegra. The VegaComb 3.2 Build7 is fast and stable.
1. problem: the USB on my tablet works only in PC connection mode. When I plug in a pendrive, or external hard drive nothing happens. (looks like not connected...)
2. problem: I can't install Build8.1 because VegaModdedStock_v1.10_v2.exe writes: "unknown device".
Can anybody help me?
Ad 1: USB host is not supported yet in vegacomb (at least not in the standard USB connector)
Ad 2: I installed build 7 directly from the standard Point-of-View firmware 1.10, which ran fine after doing a factory reset. But than I wanted to move to build 8.1. From build 7, I was able to install modded stock v2 without problems, which gave me access to CWM. Than re-installed build 7 through CWM. Than installed the build 8.1 patch through CWM. That works on the Pointof View tablet too.
THX
Thx, it works, but I wait for a newer version with working USB host...
hello i have opad p10 oem version of advent vega after some market application install first my desktop window gone then i tried to restart in recovery mode but tablet is no screen cant inter in cwm only white circle with andriod robot with in upear micro second and gone pleas help i cant connect with my pc because usb problem any method to boot or flash with sdcard i have some knowledg about linux and lablet install 3.2 9n1 thanks sorry for my bad english
As far as i am aware the only way out is to reflash the stock firmware, without usb your a bit stuck. what is the problem with the usb connection?
i am trying 3 systems xp w7-64 w7-32 all are device not recognized error in device maneger is yellow mark unknown device
You need to install the usb recovery drivers. They are on the advent/pov websites. I assume there the same as your tab.
i cant access my tablet because i have usb not recognized error i want any alternat method to flash my tablet rom like sd card or usb drive thanks
no one solved my problem any idea if i use usb to serial cable or usb to lpt cable
You need to sort the usb driver issue. That will solve your problem. As far as i am aware flashing the stock rom with any other cable is not possible.
finaly i found a pc i install a nvidia driver audi sign green but run moddedstock its showing error nvflash uid read failed what this error and some time nvflash runing but blank screen nothing hapen
every time connect to pc masseg appear this device perform faster but connect to usb 1.1 and every time flash hang betwen system.img copying last file why is connect slow speed not full usb 2 speed there is cable problem or some thing else or driver problem ihave tried vega flash and modded stock v2 any help to try with linux ubuntu pleas help me thanks
any help to flash only system.img or only flash cwm to boot into cwm and then install modded rom in to opad
Can you boot in recovery mode?
SGS2-i9100; SGS3-i9300; Archos 101 Turbo (G9/250gb/512mb)
Hello
My Lenovo TPT 1838-2CG has stopped connecting with USB (it will only charge) so I have no way to use ADB. Can I root it with an APK?
Thanks!
M
Simple answer, NOPE. You need to find out, why it does not connect and fix it. Cable? USB connector of the TPT?
Hi,
I have a nexus 7 2012 wifi which doesn't boot. If I connect it to my PC, in the device manager it shows that it is in apx mode. I cannot access the bootloader either. Is there any way in which I can fix it??
Thanks in advance!
Hi,
I have iBall Slide i701 Windows Tablet which is stuck at boot screen (originally it had Windows 8.1 but I upgraded it to Windows 10). Now, request to please share the step by step guide to reinstall/repair Windows 10 / 8.1 in the tablet.
Thanks,
Vijay Gupta
Hi!
I dont know your device but by default the steps will be:
1 - Find, download and create a boot pendrive with firmware.
2 - need a OTG cable to plug in tablet
3 - Figure it out how to boot from pendrive, maybe a combination of keys like volume up + power, etc.
4 - plug OTG with pendrive in tablet and try to boot on pendrive.
5 - If successful you will able to recover or reinstall firmware.
Will be something like this I guess