Hello,
I try to experiment with my phone a lot. I think I overdone it today.
Had no GPS running CM10.2 and went back to stock rooted.
Had a message today there was an update (from Sprint). Installed.
The phone booted right to TWRP and keeps on booting there.
I tried to restore the CM10 back up with no luck, tried restoring stock back up with no luck.
Then I wiped everything clean. Still boots to TWRP.
I do have my backups on my PC.
I have no roms in the phone anymore so I cant flash anything.
Any suggestions?
Keep in mind I am fairly new to this. If I have to read up on something just point me to the right direction.
THANKS!
Dominik
This belongs in the Q&A section. Do you know how to use adb? Chances are that even sideloading a rom will not work. I had this issue not to long ago and I had to completely restore my device using lg flash tool. It just keeps rebooting into twrp? Try downloading a rom on your pc. Download the android sdk, navigate to platform-tools inside of the sdk folder, place the download rom inside this folder, hold down shift key and right click, select open command window here, open twrp on your phone and click advanced and hit adb sideload, type adb devices in the command window and it should list your device(you need your phones drivers first!), the type in cmd adb sideload (name of rom) without "()". it should push it to your phone.
If that method does not work you need to use the lg flash tool. download this to your pc: http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/Sprint+LS980/
look at the readme inside the folder and it will navigate you to the step by step instructions. Just make sure you use the Sprint files included in the link above and not the Verizon files. Steps are the same, files are not. It's very important.
dozol said:
Hello,
I try to experiment with my phone a lot. I think I overdone it today.
Had no GPS running CM10.2 and went back to stock rooted.
Had a message today there was an update (from Sprint). Installed.
The phone booted right to TWRP and keeps on booting there.
I tried to restore the CM10 back up with no luck, tried restoring stock back up with no luck.
Then I wiped everything clean. Still boots to TWRP.
I do have my backups on my PC.
I have no roms in the phone anymore so I cant flash anything.
Any suggestions?
Keep in mind I am fairly new to this. If I have to read up on something just point me to the right direction.
THANKS!
Dominik
Click to expand...
Click to collapse
1. Never flash an OTA on a phone that's been modified in any way.
2. Never post questions in development.
3. What typo said
phatmanxxl said:
1. Never flash an OTA on a phone that's been modified in any way.
2. Never post questions in development.
3. What typo said
Click to expand...
Click to collapse
Sorry, I will ask in the correct sub-forum.
Dominik
dozol said:
Sorry, I will ask in the correct sub-forum.
Dominik
Click to expand...
Click to collapse
its an easy fix. search the forums for a fix.
Everything I found on this says volume + and power, which kicks me into download mode, not fastboot.
I've gone into adb and typed adb reboot bootloader, but that just restarts the phone and turns in on like normal.
I google the how to enter fastboot mode on LG G2 and can find plenty of post about being stuck in fastboot, but nothing on how to get into fastboot in the first place.
Found a tutorial here about setting up and using fastboot and thought I was set until I got to the part about "and using fastback", where it just says:
Make sure you have android debugging turned on in your phone (not really needed for fastboot but you do need for ADB), plug it into your computer and boot into fastboot mode...
I felt like watching "Much ado about nothing" when Denzel says; "The learned constable is too cunning to be understood"
Any direction is appreciated.
Hmm, I may have written that guide... Just checked and yeah should have been more clear I'll change that up. It should have read the USB debugging was needed for adb (not for fastboot) so when you can issue
adb reboot bootloader
But after that I did mention to check device specific forum for answers on how to get into fastboot/bootloader and being I've never held an lg g2 I took a quick look around.
Unfortunately the only way that I found that people said works every time is to wipe recovery to get into bootloader mode as the recovery you guys currently have disables something due to a patch getting custom recoveries to work
So yeah, I would advice to speak with someone knowledgeable about your specific device before you just wipe recovery
Out of curiosity, is there something specific you need to do with fastboot or are you just curious about your phone?
Sent from my Nexus 7 using XDA Premium 4 mobile app
demkantor said:
Out of curiosity, is there something specific you need to do with fastboot or are you just curious about your phone?
Click to expand...
Click to collapse
the current thing I've been trying to straighten out is that despite being rooted and installing TWRP, I can't install ROMS. I tried CM 11 and Hellfire so that I could put kitkat on, but gave the following:
Error executing updater binary zip.
One of the answers I found said that I had to go back to TWRP 2.3 (I'm using 2.6) and I believe that's where the whole bootloader thing came into play, because it was the way to 'downgrade' -
So then I found Philz touch 6 (as I understand it a mode of CM 11), but here he talked about fastboot and lokifying items. Here's the link:
http://forum.xda-developers.com/showthread.php?t=2554053
In the end it still comes back to the "can't load ROMs" issue. Just want a completely stripped down Kitkat that I can add the stuff I want without the bloatware.
Thanks in advance.(and the thanks button was hit on your reply)
For KitKat you should need a newer recovery with SELinux support which I believe is 2.6.x and newer for twrp, 2.3 I doubt would work if there even is one for your phone
But yes fastboot is often the best way to change recoveries but not the only way.
If there is a flashable.zip you could install new recovery from old
If your current ROM supports the flash image binary you can use a terminal emulator
You can use adb to install
Or even apps from the market
I would look for the latest recovery for your device, twrp, cwm, shouldn't matter so long as its new and then find what way works best changing for your phone.
The update-binary issue is often a sign that you need to change recoveries
Unfortunately without having your device I don't know if I can give you the best answers but feel free to ask
Best of luck!
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Unfortunately without having your device I don't know if I can give you the best answers but feel free to ask
Best of luck!
Click to expand...
Click to collapse
Thanks again. I have adb and the script for loading TWRP 2.6.xx. I unrooted and rerooted the phone, because I wasn't sure how to replace the recovery... Now I think I realize that I could just find another recovery image and place it in the same file as the loki flash and that will flash it (At least that's what I understand at present).
If that's the case, then downloading the Philz touch 6 would work... but not wanting to brick it, I'm still asking and reading.
Hello Guys.
I am having a similar issue. I have a new ROM that will not run because of a faulty lg set up wizard that always force closes and I can not get passed it and a nandroid that for some reason is corrupted. So. This fastboot seems to be a dead end it looks like a quick learning curve of ADB is the only viable answer. I have installed all SDK Manager with ADB Tools and also the required Jarva JDK and LG drivers. The phone is turned on (at the beginning of the faulty setup wizard) In CMD my device is found when typing in 'adb devices' So. I am already to push a new ROM over to the phone.
Do either of you guys know the adb command?
Help would be appreciated.
Thanks
You can't actually flash a new ROM with adb, but you can either push it phone with adb and then flash in recovery. Or if your recovery has an option for adb sideload then use this.
Also setup wizard crashing is usually the fault of wrong gapps or not wiping before flashing a rom
Sent from my Nexus 4 using XDA Premium 4 mobile app
I found that the best way was to load flashify, that did the trick so I could start trying out ROMs... so no on to the next step - finding a 4.4.2 stripped down stock and the LG stuff I actually like.... thanks again.
demkantor said:
You can't actually flash a new ROM with adb, but you can either push it phone with adb and then flash in recovery. Or if your recovery has an option for adb sideload then use this.
Also setup wizard crashing is usually the fault of wrong gapps or not wiping before flashing a rom
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the reply!
I know it's not possible to flash a ROM via ADB. I have everything set up, ADB etc, etc. My phone is turned on and adb is seeing it but I can not work out the command to push. Every time I try to push I just get a long list of ADB instructions (I think they are) but nothing gets pushed. I have read lots of instructions on how to make the command but I still must be doing something wrong.
Here are my parameters;-
adb push/C:\Users\dene\Desktop/cm-11-20140210-SNAPSHOT-M3-d802.zip/sdcard
Am I missing some spaces I am not aware of? Are all my slashes the right way round and in the right places? Is my 'sdcard' destination designation correct seeing as there is only internal storage on the G2?
Another problem I am having is that ADB has no problem seeing my sevice EXCEPT when I boot in to recovery (TWRP). When in recovery I lose coms between my device and pc. Hence I can no do TWRP ADB side load (I have tried). I have all the correct LG drivers loaded. Except MTP keeps failing to install? Any ideas?
Not to be mardy about it or hassle you but I am fairly house bound and live out in the country and really require my mobile phone. I have spent many hours trying to figure this out. Any help with the above would be much appreciated?
PS. I did a very thorough wipe, I always do. The gapps are built in to this ROM!
Thanks
dodge3003 said:
Thanks for the reply!
I know it's not possible to flash a ROM via ADB. I have everything set up, ADB etc, etc. My phone is turned on and adb is seeing it but I can not work out the command to push. Every time I try to push I just get a long list of ADB instructions (I think they are) but nothing gets pushed. I have read lots of instructions on how to make the command but I still must be doing something wrong.
Here are my parameters;-
adb push/C:\Users\dene\Desktop/cm-11-20140210-SNAPSHOT-M3-d802.zip/sdcard
Am I missing some spaces I am not aware of? Are all my slashes the right way round and in the right places? Is my 'sdcard' destination designation correct seeing as there is only internal storage on the G2?
Another problem I am having is that ADB has no problem seeing my sevice EXCEPT when I boot in to recovery (TWRP). When in recovery I lose coms between my device and pc. Hence I can no do TWRP ADB side load (I have tried). I have all the correct LG drivers loaded. Except MTP keeps failing to install? Any ideas?
Not to be mardy about it or hassle you but I am fairly house bound and live out in the country and really require my mobile phone. I have spent many hours trying to figure this out. Any help with the above would be much appreciated?
PS. I did a very thorough wipe, I always do. The gapps are built in to this ROM!
Thanks
Click to expand...
Click to collapse
I HAVE SOLVED THE ISSUE! Thanks for your assistance mate but in the end I just went back to stock using this amazing thread:-
http://forum.xda-developers.com/showthread.php?t=2432476
in conjunction with this amazing video;-
http://www.youtube.com/watch?v=IixQjo_hyz8
So! I am now un rooted and back to stock. Time to start the rooting ana ROMing all over again.lol
Thanks
Glad to here!
You need a space after push
But it usually easier not to enter the location of a file while pushing so cd to the directory first like
cd C:\Users.....
Then once there adb push /nameoffile /locationonphone
But if you don't want to cd, I see you have widows, depending on version you can just right click in the folder your file is located and choose open cmd here
Sent from my Nexus 7 using XDA Premium 4 mobile app
Need Help
As I thought I bought LG G2 D-802, but it was D-800 and I accidentally install the lollipop of D802 and now it's in bootlap.... I can only get into fastboot and whenever I try to flash .img of D-800 or D-802 it just stuck at "writing .img"
What to do to unbrick the phone and bring it back to live. I tired the adb and fastboot cmd method on windows 10 and windows 7 but no success. It's just stuck at writing .img file.
Hello,
This isn't my first Nexus 7 (my kids had 2012's and I had a 2013: they were all unlocked and rooted). This year I got my oldest a 2013 model, and promptly set to unlocking it and rooting it. TWRP is my normal go-to for ROM jumping ease.
This time; I used CF-AutoRoot to get it rooted, I used the simple fastboot oem unlock and fastboot flash recovery twrp.img .. all appeared to have went fine. UNTIL; I booted into TWRP and none of the directories had any files. So I rebooted back to the OS, installed Astro file manager, looked around and sure enough; all the .zip files for trying out the ROMS were there (along with some gapps files).
So I installed twrp via the PlayStore, and fired it up. It can not see the files either!? (It also said BusyBox wasn't installed; I installed a couple (and un-installed them) to see if it would see them; it did not and doesn't appear to install what it needs even when it asks if I want to install it). I installed UPDATE-SuperSU-v2.46.zip earlier in the process also.
Ideas? I did use adb to push the files to / and again to /sdcard .. I can see they went via Astro, but when I'm in TWRP nothing is there? What gives?
Thank you,
P.S. I'm running 6.0.1, bone stock except for being rooted and unlocked.
67comet said:
Hello,
This isn't my first Nexus 7 (my kids had 2012's and I had a 2013: they were all unlocked and rooted). This year I got my oldest a 2013 model, and promptly set to unlocking it and rooting it. TWRP is my normal go-to for ROM jumping ease.
This time; I used CF-AutoRoot to get it rooted, I used the simple fastboot oem unlock and fastboot flash recovery twrp.img .. all appeared to have went fine. UNTIL; I booted into TWRP and none of the directories had any files. So I rebooted back to the OS, installed Astro file manager, looked around and sure enough; all the .zip files for trying out the ROMS were there (along with some gapps files).
So I installed twrp via the PlayStore, and fired it up. It can not see the files either!? (It also said BusyBox wasn't installed; I installed a couple (and un-installed them) to see if it would see them; it did not and doesn't appear to install what it needs even when it asks if I want to install it). I installed UPDATE-SuperSU-v2.46.zip earlier in the process also.
Ideas? I did use adb to push the files to / and again to /sdcard .. I can see they went via Astro, but when I'm in TWRP nothing is there? What gives?
Thank you,
P.S. I'm running 6.0.1, bone stock except for being rooted and unlocked.
Click to expand...
Click to collapse
Good day and welcome to XDA-Developers.
Your inquire has been reviewed.
Within moments your thread will be moved to the correct device location within the forum.
There your issues will be addressed by users whom know and understand your device.
Regards,
XDA Assist Team
Hello and thank you for using Q/A,
after touching on "install" you should see a field where you can enable ZIP. This button is located next to the flashing-bar.
Kind regards
Trafalgar Square
Trafalgar Square said:
Hello and thank you for using Q/A,
after touching on "install" you should see a field where you can enable ZIP. This button is located next to the flashing-bar.
Kind regards
Trafalgar Square
Click to expand...
Click to collapse
Okay; I went ahead and put a post on my site so I can show pictures on here ..
I've been using TWRP to install miscellaneous ROMS on my devices since my Nexus One (think I used CWM back then though). I have rooted all of my phones (Except my Kyocera piece of junk) and tablets with little to no issues (the occasional soft brick when learning, but that's normal in my book).
I've uploaded the screens I experience as I go alone with explanations on my openlug (.) com site. I've shut comments off since it is a server in my house that handles the sites, e-mail isn't available via my home server (haven't figured out how to bypass my ISP's restrictions).
I haven't posted enough to XDA to allow any external links (eg: images from my site). So please head to openlug (.) com and see what I wanted to show.
Time to go find something to post about so I can get past that 10 post limit ..
Thanks for any and all help; never had this happen before. I'm using Linux to work on my devices, so any .exe ideas w/not work.
Hi there! I want to upgrade from android 6.0.1 to a newer, preferably the latest, version of android. I believe that is "A2017G-N-B09" as of the time of this post.
I downloaded A2017G-N-B09 (??) from the ZTE site, as linked in raystef66's thread. After putting it in the root of the SD card and running the update process, the phone rebooted as expected and said that the update was finished, but the android version is still showing as "6.0.1" (MiFavor is 4.0). The update shows in the update history but, as far as I know, nothing has changed at all.
After that, I looked around on the forums some more and saw someone mentioning that you might need to have Marshmallow B10+ before jumping into Nougat. So I downloaded MM-B11 from raystef66's thread, but the exact same thing happened.
Am I missing a step? Or am I using the wrong files to update? This guide mentions downloading the firmware (a separate file, apparently) before downloading and installing the update package. Is that what's missing for me?
I spent the last two days, since my new A2017G arrived, searching this forum (and google) for help with my issue, but haven't found any relevant solutions.
Many thanks in advance of any advice and help you might be able to offer me!
edit - I'm in the UK, if that makes any difference.
Neskobar said:
Hi there! I want to upgrade from android 6.0.1 to a newer, preferably the latest, version of android. I believe that is "A2017G-N-B09" as of the time of this post.
I downloaded A2017G-N-B09 (??) from the ZTE site, as linked in raystef66's thread. After putting it in the root of the SD card and running the update process, the phone rebooted as expected and said that the update was finished, but the android version is still showing as "6.0.1" (MiFavor is 4.0). The update shows in the update history but, as far as I know, nothing has changed at all.
After that, I looked around on the forums some more and saw someone mentioning that you might need to have Marshmallow B10+ before jumping into Nougat. So I downloaded MM-B11 from raystef66's thread, but the exact same thing happened.
Am I missing a step? Or am I using the wrong files to update? This guide mentions downloading the firmware (a separate file, apparently) before downloading and installing the update package. Is that what's missing for me?
I spent the last two days, since my new A2017G arrived, searching this forum (and google) for help with my issue, but haven't found any relevant solutions.
Many thanks in advance of any advice and help you might be able to offer me!
edit - I'm in the UK, if that makes any difference.
Click to expand...
Click to collapse
Can you try to install it again and read what the installation text on the recovery mode says? There's probably an error there.
Otherwise get an SD card, put the zip there, and go to the recovery (turn the phone off, and turn it on while holding volume up and power), then select to update from SD card and select the zip. If it fails or something, you'll have the text there, and you'll be able to write it down or whatever.
Also, what does the phone say on the back? Tell me what's the model as seen on the back. It might be an A2017 instead of an A2017G.
Choose an username... said:
Can you try to install it again and read what the installation text on the recovery mode says? There's probably an error there.
Otherwise get an SD card, put the zip there, and go to the recovery (turn the phone off, and turn it on while holding volume up and power), then select to update from SD card and select the zip. If it fails or something, you'll have the text there, and you'll be able to write it down or whatever.
Also, what does the phone say on the back? Tell me what's the model as seen on the back. It might be an A2017 instead of an A2017G.
Click to expand...
Click to collapse
Thanks for the quick reply. The model says A2017G on the back.
I just tried to install through the recovery mode, as suggested. It says, "Sorry, you can't sdcard upgrade".
Is this something I can work around?
Neskobar said:
Thanks for the quick reply. The model says A2017G on the back.
I just tried to install through the recovery mode, as suggested. It says, "Sorry, you can't sdcard upgrade".
Is this something I can work around?
Click to expand...
Click to collapse
For the record, the zip file from ZTE support has an update.zip in it. So once you've downloaded it, extract it and put the update.zip onto your intSD/extSD.
I didn't uploaded the "ready" A2017 N-B09 yet on DownloadCenter.
As for the MM-B11 from Downloadcenter : this is a zip you can use directly. Rename it to update.zip, put on SD and update within settings.
Hope that helps you out.
raystef66 said:
For the record, the zip file from ZTE support has an update.zip in it. So once you've downloaded it, extract it and put the update.zip onto your intSD/extSD.
I didn't uploaded the "ready" A2017 N-B09 yet on DownloadCenter.
As for the MM-B11 from Downloadcenter : this is a zip you can use directly. Rename it to update.zip, put on SD and update within settings.
Hope that helps you out.
Click to expand...
Click to collapse
Yep, that's what I did. Any idea why that didn't work then? I mean, it detected the "update.zip" when I had it on the SD card, and the 'update' appears in the history, but it clearly didn't install.
Neskobar said:
Yep, that's what I did. Any idea why that didn't work then? I mean, it detected the "update.zip" when I had it on the SD card, and the 'update' appears in the history, but it clearly didn't install.
Click to expand...
Click to collapse
Strange.
Try to ADB sideload.
Also try to wipe cache in recovery. You'll never know.
Also try to rename to update.up and try again.
But then again, as you said the update was applying but nothing installed is at least weird. And also, when you tried to update through recovery and apply from SD, you couldn't is at least strange.
So try again with above steps.
BTW, where did you buy the phone ?
raystef66 said:
Strange.
Try to ADB sideload.
Also try to wipe cache in recovery. You'll never know.
Also try to rename to update.up and try again.
But then again, as you said the update was applying but nothing installed is at least weird. And also, when you tried to update through recovery and apply from SD, you couldn't is at least strange.
So try again with above steps.
BTW, where did you buy the phone ?
Click to expand...
Click to collapse
I got the phone from Gearbest.
I'm trying to figure out how to do all this. I'm brand new to ADB, so I don't really know what I'm doing. I downloaded the android SDK, and the universal ADB drivers. The device is showing up when I type "adb devices" and is responding to the "adb reboot bootloader" command, so it seems like it's set up ok.
So, the next step is to get TWRP on to the phone, right? I'm trying to follow the steps here, under the Fastboot Install Method (No Root Required) section, but it seems to be stalling at the "fastboot oem unlock" command. Just gets stuck at "waiting for device".
Sorry if this is all baby-steps. As I said, I'm really new to this and feel like I'm in a bit over my head. I'm happy to keep learning, though, as long as I'm not in real danger of destroying the phone.
edit - I renamed the zip to "update.up" and couldn't get that to work either. It's not detected in the update section of settings, and I still get the same "Sorry, you can't sdcard upgrade" message.
edit #2 - I tried naming it to "update.up.zip" and it detected it this time, trying to run the update now.
Neskobar said:
I got the phone from Gearbest.
I'm trying to figure out how to do all this. I'm brand new to ADB, so I don't really know what I'm doing. I downloaded the android SDK, and the universal ADB drivers. The device is showing up, when I type "adb devices" and is responding to the "adb reboot bootloader" command, so it seems like it's set up ok.
So, the next step is to get TWRP on to the phone, right? I'm trying to follow the steps here, under the Fastboot Install Method (No Root Required) section, but it seems to be stalling at the "fastboot oem unlock" command. Just gets stuck at "waiting for device".
Sorry if this is all baby-steps. As I said, I'm really new to this and feel like I'm in a bit over my head. I'm happy to keep learning, though, as long as I'm not in real danger of destroying the phone.
Click to expand...
Click to collapse
No you dont require TWRP for that.
Put the update.zip in adb folder.
Just type adb reboot recovery ( in ADB) . It boots into your stock recovery. There you can apply adb sideload (dont know the actual text : "apply update from adb").
Check that on your phone. Then phone is waiting to your command.
Then type : adb sideload update.zip (or ota.zip)
raystef66 said:
No you dont require TWRP for that.
Put the update.zip in adb folder.
Just type adb reboot recovery ( in ADB) . It boots into your stock recovery. There you can apply adb sideload (dont know the actual text : "apply update from adb").
Check that on your phone. Then phone is waiting to your command.
Then type : adb sideload update.zip (or ota.zip)
Click to expand...
Click to collapse
Ah, I should have mentioned that. This is the message I'm getting when I try that:
C:\adb>adb sideload update.zip
loading: 'update.zip'
* cannot read 'update.zip' *
Click to expand...
Click to collapse
Which is what made me think perhaps I needed TWRP on the phone. But, if that's all it should be, then I'm doing something else wrong...
Perhaps a driver is missing/not installed correctly? If that was the case though, how could I check? All the basic adb commands seem to be working fine and the phone is clearly responding to them.
Neskobar said:
Ah, I should have mentioned that. This is the message I'm getting when I try that:
Which is what made me think perhaps I needed TWRP on the phone. But, if that's all it should be, then I'm doing something else wrong...
Perhaps a driver is missing/not installed correctly? If that was the case though, how could I check? All the basic adb commands seem to be working fine and the phone is clearly responding to them.
Click to expand...
Click to collapse
You're doing ok.
When you can see adb devices with your phone's number you're ok.
So, adb devices / adb reboot recovery / adb sideload update.zip
Did you try to rename it to ota.zip ?
Btw, what version of MM are you running ?
Btw2, did you wipe cache/dalvik in recovery too ?
Perhaps you could root/bootloader unlock your phone (but you loose ota readiness ). And apply those system updates or install custom roms.
But again that's up to you.
There are threads about root/unlock your phone when on MM. Just look for it. If help needed just let us know.
raystef66 said:
You're doing ok.
When you can see adb devices with your phone's number you're ok.
So, adb devices / adb reboot recovery / adb sideload update.zip
Did you try to rename it to ota.zip ?
Btw, what version of MM are you running ?
Btw2, did you wipe cache/dalvik in recovery too ?
Perhaps you could root/bootloader unlock your phone (but you loose ota readiness ). And apply those system updates or install custom roms.
But again that's up to you.
There are threads about root/unlock your phone when on MM. Just look for it. If help needed just let us know.
Click to expand...
Click to collapse
Same problem when calling it ota.zip, " cannot read 'ota.zip' ". I'm trying to put A2017G-MM-B11 on there (although ultimately I want to get to A2017G-N-B09 if possible). My phone is on 6.0.1 currently.
Yea, I wiped the cache in recovery. Didn't seem to make any difference.
I'm not against rooting the phone or anything, but it just doesn't really seem necessary for my requirements, afaik.
Neskobar said:
Same problem when calling it ota.zip, " cannot read 'ota.zip' ". I'm trying to put A2017G-MM-B11 on there (although ultimately I want to get to A2017G-N-B09 if possible). My phone is on 6.0.1 currently.
Yea, I wiped the cache in recovery. Didn't seem to make any difference.
I'm not against rooting the phone or anything, but it just doesn't really seem necessary for my requirements, afaik.
Click to expand...
Click to collapse
Can you take a screenshot of your build number?
Go into settings /about phone and scroll down to bottom. Then take screen and upload it pls in attachment. Want to be sure what phone that you're on.
raystef66 said:
Can you take a screenshot of your build number?
Go into settings /about phone and scroll down to bottom. Then take screen and upload it pls in attachment. Want to be sure what phone that you're on.
Click to expand...
Click to collapse
Ok, I attached it to this post, hope it works.
Neskobar said:
Ok, I attached it to this post, hope it works.
Click to expand...
Click to collapse
AFAIK, you're on B11 right? Also security patches are from that date imo. So perhaps download the first nougat B01 and see what happens and report back.
But it remains strange that the nougat b09 is in your update history, right?
If this nougat B01 as a test does not work, you may consider to wipe your phone. First backup though.
Is it possible it was flashed in incorrect order of update and messed up partitionioning a little bit, leaving some data screwed up?
Neskobar said:
Same problem when calling it ota.zip, " cannot read 'ota.zip' ". I'm trying to put A2017G-MM-B11 on there (although ultimately I want to get to A2017G-N-B09 if possible). My phone is on 6.0.1 currently.
Yea, I wiped the cache in recovery. Didn't seem to make any difference.
I'm not against rooting the phone or anything, but it just doesn't really seem necessary for my requirements, afaik.
Click to expand...
Click to collapse
Are you sure you are putting the file where you are in cmd? If you write 'adb sideload o' and hit tab, does the name appear? If not, put the zip on C:/, then write 'cd..' with 2 dots on CMD until you get to C:/, and try again
Usually the problem is that adb will get out of memory or crash because of some random thing. But try that nonetheless
lol.... just check 1 more thing... the zip file you have downloaded should be extracted first... and its normally contains 2 files... one zip and pdf file... and if the that zip files is not name as update.zip then just rename it and copy to your root internal memory... then check updates and install the update... it should be running then.
Sometimes i have this silly mistake as well until i open the zip files and saw another zip file in the downloaded rom and realized it.
raystef66 said:
AFAIK, you're on B11 right? Also security patches are from that date imo. So perhaps download the first nougat B01 and see what happens and report back.
But it remains strange that the nougat b09 is in your update history, right?
If this nougat B01 as a test does not work, you may consider to wipe your phone. First backup though.
Click to expand...
Click to collapse
Yes, that's what I was concerned about. The very first update i tried to install was N-B09, and everything else has been an older update after that, so maybe it won't overwrite the newer files, or something? Or possibly something else went wrong in the first update, so everything else just wouldn't work because of that?
I'm putting N-B01 onto my SD card right now, so I'll test that, and if it doesn't work I'll wipe the phone and start again. If I do need to wipe the phone, however, which update would you recommend trying first? N-B09? That might confirm if it was just bad luck on the first try, or whatever.
RobboW said:
Is it possible it was flashed in incorrect order of update and messed up partitionioning a little bit, leaving some data screwed up?
Click to expand...
Click to collapse
Agreed, that sounds like a possibility to me. I'll probably end up wiping and starting over.
Choose an username... said:
Are you sure you are putting the file where you are in cmd? If you write 'adb sideload o' and hit tab, does the name appear? If not, put the zip on C:/, then write 'cd..' with 2 dots on CMD until you get to C:/, and try again
Usually the problem is that adb will get out of memory or crash because of some random thing. But try that nonetheless
Click to expand...
Click to collapse
Yes the tab autocomplete works on the "u" of update.zip and "o" of ota.zip, when I tried both. I have to admit, I was quite excited to see your suggestion there, as I thought that would be a really easy way to confirm if something isn't right with adb, but never mind.
I still don't understand why it gives me this error then, though: * cannot read 'update.zip' *.
ramnkc said:
lol.... just check 1 more thing... the zip file you have downloaded should be extracted first... and its normally contains 2 files... one zip and pdf file... and if the that zip files is not name as update.zip then just rename it and copy to your root internal memory... then check updates and install the update... it should be running then.
Sometimes i have this silly mistake as well until i open the zip files and saw another zip file in the downloaded rom and realized it.
Click to expand...
Click to collapse
Thanks for the suggestion, and yes, I did confirm that I renamed the right zip file. That would have been easy thing to fix though, sadly.
edit - I tried the same adb commands with windows powershell too, and got exactly the same error messages.
What ROM was on it before you flashed B09?
Updating to N-B01 worked! I've no idea why this happened the way it did, nor why adb didn't work for sideloading, but I'm really glad that it finally worked.
The order of events:
1) Installed N-B09 via transfer to SD using the android updater, no difference in android version, but appeared in update history.
2) Installed MM-B11, same as above.
3) Tried various methods of installing MM-B11, including:
- SD transfer
- recovery mode SD update (which the phone wouldn't let me do, saying, "Sorry, you can't sdcard upgrade").
- ADB sideload (which never worked even slightly. I always got the message, * cannot read 'update.zip'/'ota.zip'/'update.up.zip' *)
- Tried the above methods with variously named zip files, including "update, ota, and update.up".
- Tried the above methods, but wiping the cache in between processes.4) Installed N-B01 via transfer to SD using the android updater. This time the process took a lot longer and after rebooting the phone, went through the process of optimizing apps, which it had never done before.
Ok, I think that's everything.
The only theory I can come up with is that: Something (I have no idea what, though) went wrong with the first update attempt and every subsequent attempt to update to an older version didn't work because it didn't want to overwrite newer android version files? That doesn't seem quite right to me, though, as I would assume that whatever is in the update.zip would just overwrite everything as standard, because the assumption would always be that these files are newer than the existing ones.
What would you recommend that I do next? Should I try to push through the latest N update now, then? Has this outcome helped you figure out what the problem was/is?
Whatever the case, I'm happy to finally get an update working. Thanks very much for all your help and suggestions, guys. It was much appreciated!